I unlocked the phone a few times even.. with aWizard and the tool inside the CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe file.
it never gets past 0% on the isntall, so it's good I have a working phone.. but I can't update anything.
anyone have any ideas?
have you tryied to cid unlock are you using lokiwiz to unlock or are you using awizard
yeah I tried both actually.
.
yeah I tried both actually.
.
Related
The software says phone is unlocked however when I go to out the new sim card in a screen is prompted asking for the unlocking code, I have a cingular 8125 and am trying to use get it unlocked to use my t-mobile card.
- What unlocksoftware?
- What Rom?
shane1977 said:
The software says phone is unlocked however when I go to out the new sim card in a screen is prompted asking for the unlocking code, I have a cingular 8125 and am trying to use get it unlocked to use my t-mobile card.
Click to expand...
Click to collapse
That's 'cos you've probably used lokiwiz 0.2b with a rom version 2.xx phone.
Lokiwiz 0.2b doesn't work with roms 2.xx but, since it's a batch (.BAT) file, it will always reports success even when it hasn't actually succeeded.
Use lokiwiz 0.3a instead.
bye
2.3beta
molski said:
- What unlocksoftware?
- What Rom?
Click to expand...
Click to collapse
The software id the awizard 1_3beta
OS 2.25.11.1
Re: 2.3beta
shane1977 said:
molski said:
- What unlocksoftware?
- What Rom?
Click to expand...
Click to collapse
The software id the awizard 1_3beta
OS 2.25.11.1
Click to expand...
Click to collapse
awizard 1_3beta is the same of lokiwiz 0.2b. Use lokiwiz 0.3a!
bye
I was trying to install risidoro's ROM...
followed instructions "
<<<<<<<<<<<<<<<<<<<<<<<
1. Ran Lockiwiz3a (IPL&SPL v.2xx) this gave me an error (just thought Id include. You can skip this.)
2. Downgraded to (CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE) found it somewhere in this post. let me know if you need me to post it.
**this took me to IPL-1.xx; SPL-2.xx; GSM-1.xx; OS-1.xx**
3. Downloaded Lokiwiz2b.
4. Copied EnableRapi.cab to my phone, and installed it to Extended ROM
5. Ran Lokiwiz2b - CID Unlock my phone
6. Upgraded to Risidoro's ROM (despite him saying it needed to be 2.xx)
** this upgraded everything else to 2.xx except my IPL(1.xx). but all the tweaks and apps were installed.**
6. I wanted my IPL to match my SPL so I loaded 2.26 (G3) from www.molski.biz
7. Reloaded Risidoro's ROM and now all is well >>>>>>>>>>>>>>>>>>>>
and after doing the lockiwiz... i'm stuck at it asking for a network unlock code....
am i done for?
i've tried all the different versions of lokiwiz...
and i'm just stuck at the simlock screen...
i did manage to install enablerapi.cab by tapping the screen real fast while it flashed inbetween the sim lock screen and the file explorer...
but still no luck...
someone please help
ummagawd said:
i think i know what i might have done wrong,
i installed the enablerapi.cab bit DID NOT RUN IT before i ran lokiwiz..
now i'm stuck at the SimLock screen and have no idea how to get rid of it...
I searched and supposedly lokiwiz02b can unlock it... but it won't work... maybe because I can't run enablerapi (simlock screen blocks any activity)
can someone please help me?
Click to expand...
Click to collapse
take the simcard off, then copy enanle rapy to the device and run it [not from extended-rom] then use latest lokiwiz to give you the unlock code.
after it gives the code put the sim card in and then enter the code.
ummagawd said:
i think i know what i might have done wrong,
i installed the enablerapi.cab bit DID NOT RUN IT before i ran lokiwiz..
now i'm stuck at the SimLock screen and have no idea how to get rid of it...
I searched and supposedly lokiwiz02b can unlock it... but it won't work... maybe because I can't run enablerapi (simlock screen blocks any activity)
can someone please help me?
Click to expand...
Click to collapse
take the simcard off, then copy enanle rapy to the device and run it [not from extended-rom] then use latest lokiwiz to give you the unlock code.
after it gives the code put the sim card in and then enter the code.
faria,
thank you.. okay i'm still having a bit of trouble... this is what i did
I did exactly what you said... downloaded and tried lokiwiz03a this time...
and it gives me a simlock code.... but the simlock code is some crazy characters....
that aren't available for me to use on the phone? I did some research and this means that the phone is already unlocked?
Okay so i put the SIM card back in... and it still asks me for an unlock code and the simLOCK screen is back.
i wonder if the IPL/SPL version (currently 2.26) has anything to do with it
i'm gonna flash it back to 2.17 and then try it again
ummagawd said:
faria,
thank you.. okay i'm still having a bit of trouble... this is what i did
I did exactly what you said... downloaded and tried lokiwiz03a this time...
and it gives me a simlock code.... but the simlock code is some crazy characters....
that aren't available for me to use on the phone? I did some research and this means that the phone is already unlocked?
Okay so i put the SIM card back in... and it still asks me for an unlock code and the simLOCK screen is back.
i wonder if the IPL/SPL version (currently 2.26) has anything to do with it
i'm gonna flash it back to 2.17 and then try it again
Click to expand...
Click to collapse
install a complete original rom from you operator then do the steps above again.
and yes it is unlocked if those caracter appear.
what is the opeatater logo in the case of the phone? i-mate.vodafone etc?
bad news... i can't flash back to 2.17 because my nf.nbf file isn't correct or something...
here's a recap... i'll paypal $5 to the first person that can get my phone working again!!
i first tried to CID unlock when i had a 1.xx IPL and 2.xx SPL (in an attempt to flash to risidoro's ROM)
it reboot my qtek 9100, and when it came back... it was asking for a network key?!?! what the heck? I then found out I kept getting the "internal error" thing.
so then i tried it again, numerous times, different versions (02, 02a, 02b)
and then i tried flashing to molski's (2.26) which was a success...
i now have 2.26 for both IPL and SPL...
Then i tried the 03a version.... this time no errors, it gives me an unlock code but its in the weird crazy characters. This supposedly means that my device is already unlocked. So i'm happy, I put my SIM back in, and now its asking for an unlock code yet again. I'm stuck in the SimLock screen...
can someone please PLEASE help. I will paypal $5 to the person that can get my phone unlocked and working again.
I'm with t-mobile. and the phone is a qtek 9100 (2.26 IPL and SPL)
did you get a ]data crash] error or similar?
if so only this guys can help you .it will unlock cid and sim if neded
http://www.imei-check.co.uk/
faria,
I didn't get that data crash error or anything...
It just says its unlocked (even thsoe the unlock code means its already unlocked) and when i put the sim back in... it still asks for it.
I also tried flashing the ROM to an OEM qtek ROM (2.17) and it says something about an nf.nbf file or something
I have no carrier stamp as I bought this from MMB a year ago.
ummagawd said:
faria,
I didn't get that data crash error or anything...
It just says its unlocked (even thsoe the unlock code means its already unlocked) and when i put the sim back in... it still asks for it.
I also tried flashing the ROM to an OEM qtek ROM (2.17) and it says something about an nf.nbf file or something
I have no carrier stamp as I bought this from MMB a year ago.
Click to expand...
Click to collapse
have you tied another SIM card? from another network.
joriq said:
i ja da se pohvalim da sam ga na kraju barem procackao malo. Prvi utisak je da je tel MNOGO manji nego sto sam ocekivao, odmah pored je sensation XL, ali je One X, iako je isto 4,7", makar meni manji vidno. Nisam imao kad da vadim DHD iz kejsa, ali mi se nije dojmio kao nesto veci telefon. Big +
Takodje, imam ponudu da ga uzmem za 580€, sa 2 god garancije, a sve mi se cini da novi Galaxy nece moci da mu parira sa onim sto mene zanima (dizajn i UI), tako da mislim da na 3. maj nema sta da cekam... Hmmmmm...
Click to expand...
Click to collapse
Jedino ako s3 nije neka revolucija
Sent from my HTC One X using Tapatalk 2
milkobgd said:
kajs!?
Click to expand...
Click to collapse
Kajiš
Sent from my HTC One X using Tapatalk 2
hi all,
i've just tried to unlock my t-mobile mda ll and have run into a problem. the phone nolonger recognises any sim card, it just says ' sim card missing or invalid' i did the unlock under wm6, have reinstalled wm5 but this does not help.
does anyone know how to solve this or have i just bricked my phone
pinkllama said:
hi all,
i've just tried to unlock my t-mobile mda ll and have run into a problem. the phone nolonger recognises any sim card, it just says ' sim card missing or invalid' i did the unlock under wm6, have reinstalled wm5 but this does not help.
does anyone know how to solve this or have i just bricked my phone
Click to expand...
Click to collapse
Maybe you upgrade the AKU 3,3???
The lokwiz work only the IPL 2 (aku 2.0)
Can you write the unlock cod in MDA C II???
hi there,
thanks for reply,
i have the latest t-mobile rom so probably not aku 2.
is there any way to downgrade to aku 2. i have searched the forums with no joy.
IPL and AKU are two different things
You cant downgrade to boot v2 if you have already upgraded it to v3.x. Thats the answer I got from T-mobile.
vlodeck said:
IPL and AKU are two different things
You cant downgrade to boot v2 if you have already upgraded it to v3.x. Thats the answer I got from T-mobile.
Click to expand...
Click to collapse
Download the Lokwiz03!
If the folder have 2 bin fajl,then delete.
Run lockwiz
then write the unlock code
You put the other SIM (not T-mobile)
Write the PIN and then look the UNLOCK you must press.
Then write THE UNLOCK CODE and you have the UNLOCKED phone .
This Work with IPL 3 (AKU 3,3 T-mobile rom)
vlodeck said:
IPL and AKU are two different things
You cant downgrade to boot v2 if you have already upgraded it to v3.x. Thats the answer I got from T-mobile.
Click to expand...
Click to collapse
(unless of course you unlocked the CID already, back in the day when it there was only v1.x )
pinkllama said:
hi all,
i've just tried to unlock my t-mobile mda ll and have run into a problem. the phone nolonger recognises any sim card, it just says ' sim card missing or invalid' i did the unlock under wm6, have reinstalled wm5 but this does not help.
does anyone know how to solve this or have i just bricked my phone
Click to expand...
Click to collapse
I had the same problem.
I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
MSSH said:
I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
Click to expand...
Click to collapse
download WST TOOL from the link below and apply to check the unlock staus of your phone,if it says locked again apply the method of unlocking correctly
http://forum.xda-developers.com/showthread.php?t=329170
Error:
'When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.'
I think you did not copied the Enablerapi.cab file in your phone correctly or executed it in there
good luck
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
MSSH said:
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
Click to expand...
Click to collapse
GRRRRRRRR8
Glade I was of any help,Happy flashing
Good luck
I recently followed all steps to upgrade my phone wizard a9100 to wm6. It installed w/out problem. But when it boots it is still wm5. I downloaded various wm6 packages and it ends up the same way. I don't know what the problem is. The phone is a generic Qtek phone, not t-mobile or any other. Thankss!
Be sure that the phone is CID unlocked. If it's not and you keep on flashing you might kill the phone or criple it by not booting again into OS.
cheers
Thanks
mestrini said:
Be sure that the phone is CID unlocked. If it's not and you keep on flashing you might kill the phone or criple it by not booting again into OS.
cheers
Click to expand...
Click to collapse
Ok thankss. I'll check if it CID unlocked. Thanks for the response. So if I CID unlock it , it supposed to work correctly right?
yes
Thankkk u!
That seemed to be the problem.. Thank u lotz!!
the same problem with me too
micro-me said:
the same problem with me too
Click to expand...
Click to collapse
If its CID locked it won't upgrade,first CID unlock the phone.If its a G3 follow this guide :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
But if its G4 read the SoftSPL or HardSPL method in the G4 forum posted as stickies.