Hello guys, sometimes I leave my phone fully discharged and when I connect it to my laptop to charge it, a small light appears next to the USB port, but I don't know the meaning of this light, because I try to turn on the phone but it doesn't, so I have to use a wall charger to charge the phone.
So, what's the meaning of this light ? do you think my phone is really charging when this small light is turned on ?
Thanks for your help guys.
melequicho said:
Hello guys, sometimes I leave my phone fully discharged and when I connect it to my laptop to charge it, a small light appears next to the USB port, but I don't know the meaning of this light, because I try to turn on the phone but it doesn't, so I have to use a wall charger to charge the phone.
So, what's the meaning of this light ? do you think my phone is really charging when this small light is turned on ?
Thanks for your help guys.
Click to expand...
Click to collapse
A usb charger has a low charging rate and you would have to leave it on the usb charge for a while to get it charged up enough to boot. If the white light is on it is charging. My phone will act the same way if I plugged it into the usb on my computer and the phone is dead
Sent from my DROID3 using XDA
The few times the light came on for me, it was when I let it go flat, then put it on a charger, but it didn't yet have enough juice to power back up. Once the battery had a few % back in it, the light went off. I think it's just there to let you know that even though it won't turn on yet, it's still charging.
yes, the white LED is there to say something like "hey, i'm not dead, i'm just really, really, really tired, so don't worry and don't send me to assistance!" more or less
Related
hi
last night as usual i turned off my puter left the USB charger hooked up to my 8125 and then turned off my phone. (same process every night) this morning i came in to boot up the puter and turn on the phone, i noticed that the orange "Charging" light was NOT on on the phone. i tried to turn it on and NOTHING!!! i unplugged the USB cable still wont turn on, plugged the phone into the wall (AC) charger this time the orange light came on but the phone still will not come on. it is completely DEAD!!!! just to try something a little different i changed the USB port the cable was plugged into and tried to plug the phone into it again, nothing happend (no charge light, etc) went back to the AC charger and now it wont give the charge light with that charger either HELLP!!!!!!!!!!!!!!!! i am running the 2.17 ROM with very few programs & plugins and the phone has been ROCK solid maybe a few freezes here and there but nothing to even concern me. phone was working perfect last night 10 ,minutes before i turned it off. at the very least i would like to hard reset it to get my personal info off it before the cingular exchange, but i would feel more comfortable dowwngrading the ROM before the exchange as well. if anybody has any suggestions i am ALL ears.
thanks in advance
Take a deep breath.
Now go get your original charger that came with your 8125 plug it in.
You might to try and hit the soft reset as well.
This is a known problem with the wizard family. If worse comes to worse youw will have to get a new battery.
Breath INNNNNNN breath OUTTTTTT
OK thanks for the reply. so just to be clear you are saying this is a battery issue??? i have tried the soft reset button but nothing happens. the phone is completely dead. how can i verify if it is the battery? the phone will not turn on without a battery?? any help is appreciated
thanks again
You will have to plug your phone into the original AC Charger that came with it for a little bit.
The phone (and even the charge led) won't work until there is a minimal charge to the battery.
I had this happen and simply freaked out for about 10 minutes. Man was I happy once that little LED lit up again!
i had my wizard (8125) battery die on me suddenly. but i let it charge until the light came on, then finally let me power the damned thing on. it only had 2% battery left.
thanks again. very strange it has been plugged in all day with no signs of life. all of a sudden i pressed the ON/OFF one more time and it turned on just like it is supposed to, i am going to leave it on the charger all night but i am a little gun shy on whether to keep it or take the replacement from cingular on monday??? i would like to know why this happened so i can avoid it again in the future.
Some chargers are not up to spec. They may provide enough juice so that the phone says it is getting power but the battery does not charge right.
I have my stock wall charger by my bed and each night it goes on that overnight. Just to be safe
Master K said:
Some chargers are not up to spec. They may provide enough juice so that the phone says it is getting power but the battery does not charge right.
I have my stock wall charger by my bed and each night it goes on that overnight. Just to be safe
Click to expand...
Click to collapse
I do the same and have not had a single problem since I started the "Overnight Conditioning".
I used to use a RAZR Moto charger but it is underpowered (only 500mAh).
If you are going to use an off branded charger it has to be a good one and provide 1000mAh. Costs more but worth the investment. I found some nice portable USB Ports (one for the Car and one or AC) that have never failed me and since they are basically just a powered USB port that pushes upto 1000mAh I can use and compatable USB Cable!
My battery died last night and i charged the phone up and now the phone will not turn on anymore. Anyone have any ideas cause i'm completely out of them???
have you tried takin git out an putting in the phone again?
Yup. I dunno what is going on. I was using sony's cable to charge the thing and the power button was lit up red and now i switched to a different cable and the power button doesn't turn red anymore but the indicator lights are flashing like it doesn't have enough power to start. It may just be dead and sony's cable just stopped working and never charged the thing
Nope that isn't it... it just won't power on for some reason. i hope someone has an idea as to what is going on because i don't
I had a similar problem and had to leave it plugged in for at least 10 mins before the LEDs indicated it was charging.
THANK THE LORD THANK THE LORD. I was right. The crap cable sony uses just didn't charge the phone at all. Now that i switched i was able to turn the phone on again.
Try hard reseting the device while it is powered, might do something if its a software issue.
battery stone dead~won't recharge
I have the same problem. I don't believe ti has anything to do with the cable. The first time it suddenly came to life after a day or two fo being dead, but this time so far it is still in a coma. It did briefly awaken when connected to the pc, but it kept blacking out, and now it's completely gone again.
Could it be that it is not set to power off until the battery is completely stone dead, and therefore it won't recharge?
I think you are absolutely right. I don't believe it allows you to charge it until it is turned on. So try and plug it for like 15mins and try and power it on. Let us know if it works
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Tanquen said:
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Click to expand...
Click to collapse
Came accross this also in the Kaiser forums - think it has something to do with the battery being absolutely drained, so much that there isn't enough power to switch the current to the battery again.
Never happened to me, so never quite figured it out. But the Kaiser forum had a lot of discussion (and solutions I think) on this. (Xperia has HTC involvement..or so it's rumoured).
Tanquen said:
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Click to expand...
Click to collapse
yep... I have had that happened to my blackjack 2 a couple times too. everytime I had to connect it to the charger for like 10 15mins before it can turn on again... plugging it to the pc/hub never work.... also happened once to my iphone as well
Hey I just ran into this problem today.
Turns out it was activesync messing with the phone
Ended the mobile device center process in task manager and phone went back to normal.
EDIT: Ok maybe its not back to normal. But it was definitely caused by activesync...
EDIT2: Back to normal now... Had to plug in the wall charger. After a minute the charging lights flashed and i was able to turn it on.
Checking battery status, and its in the red.. I guess the activesync was just a coincidence.
But wow, I left the thing plugged into my computer overnight to charge, and apparently it drained more than it charged?
There is defiantly something extra going on with the Xperia. While other devices I’ve seen fully drained refuse to start charging again from a USB to PC cable and even some power outlet charges. My Xperia is also doing as Nipperos. With an almost full charge I plugged it into the USB to PC cable and the icon went to the little plug and when I clicked on it the status said that it is was charging but when I got ready to leave for the day it had drained down one red bar. It was also very warm. With this, the $800 price tag and the random crashing made worse by the incredibly poor location of the reset button and made even worse by the incredibly poor design of the battery cover. Really, what is the proper way to get the thing off without breaking it? I’m fighting the urge to return it.
Any word on a new firmware?
Nippero said:
Hey I just ran into this problem today.
Turns out it was activesync messing with the phone
Ended the mobile device center process in task manager and phone went back to normal.
EDIT: Ok maybe its not back to normal. But it was definitely caused by activesync...
EDIT2: Back to normal now... Had to plug in the wall charger. After a minute the charging lights flashed and i was able to turn it on.
Checking battery status, and its in the red.. I guess the activesync was just a coincidence.
But wow, I left the thing plugged into my computer overnight to charge, and apparently it drained more than it charged?
Click to expand...
Click to collapse
I've noticed this too... My phone will be on full charge, i connect it to my PC to install a software, then i check one bar's gone... it drains more than it charges...
my x1 did this today. my buddy has a verizon htc phone and let me use hus htc wall charger and it did the trick...
my x1 is a x1i so i dont know if the US. plugs or what dont agree with the phone. but out of 6 cables and chargers only 2 will charge the phone from a dead battery the other 4 would only charge after it was on.
so my best solution for you all is to find yourself a htc wall charger and let it charger for 20 mins before trying to turn it on.
and of course theres htc involvment on the x1. look in the windows folder. all drivers are HTCxxx.dll the comm manager is htc. theres a forum here the htc developers site. this isnt a site for samsungs and other makers. this is a site for htc devices. if it wasnt a htc device it wouldnt be here.
My experience
I had a similar experience while on a trip to Korea. I didn't foresee that a 200mA difference in the current output of a wall socket charger will cause me so much pain.
I had always been able to charge the X1 with my Jabra headset's wall socket charger, hence I brought it on my trip. Not being mindful of the ratings, it can only supply 500mA, which is different from the X1's charger, 700mA. I was using it happily on a bus, happily keeping it alive with a solar USB charger (till it ran out of juice too). A while later, playing with the GPS I noticed my battery power dropped to 20% (2 bar) so I pressed the power button to conserve energy.
Unknowingly, the battery kept draining and the next time I wanted to turn it on I couldn't. The top 2 LEDs gave me 3 red blinks. I thought, "ok, so I just go back to the hotel to charge it with my Jabra charger."
When I tried that, I noticed that the power button gave a constant red LED and the battery did not charge. Taking out the battery and putting it back, I noticed the power LED went off (which indicates it was going to charge) but came back out again. It never charged.
Back home, after using the supplied SE charger, the power LED went off and never came back. I tried to turn on the X1 after 15mins and it powered up, showing the usual charging LED cycles.
Lesson Learnt. Always use original accessories.
Same problem here....
I knew about problem charging totally dead battery with wall plug-in (from previous HTC). Totally dead battery was not possible to charge via USB (from PC). But I have bought xperia via ebay and didn't know the wall charger is not original SE charger... Hope to work with previous HTC charger
Tx for coming to the idea
Just happened to me :S
I had used it all day and Wifi was turned on so obviously battery was almost dead. To save battery I turned off the Xperia.
When I tried to turn it on again it wouldnt and so I connected it to the pc.
That didnt work out so I connected it to the standard charger but that also didnt work. Right now my Xperia X1 is lying unplugged on the table because someone said you should leave it unplugged for a couple of minutes.
Hopefully it will work, I only have had it for 3 days :´(
Also hope this doesnt happen everytime your battery is drained because that would be annoying as hell.
--Edit--
Ok so what I did was I removed the battery and plugged it back in. This worked and I managed to turn it on and right now its charging.
Though when I try to go to sleep mode it turns the display on again after about 3 seconds and does what I am guessing is a low battery beep (Sorry windowsmobile noob here) but then stops instantly, which is pretty stange.
ok anyone know a way to increase the power wattage from your pc to the usb device? (sounds dangerous i know), but there must be someone who has had a similar prob and was able to fix with a bit of tweaking....ill google and come back with any results
okay...i had similar problem today morning..it wudnt start.
so i left it charging for ten minutes...and now it has turned on finally.
i think the battery goes completely dead.
hi!
i was just wondering, my tytn 2 is not charging, when i look at the battery meter, it says charging, but instead of going up. it goes down, the amber light
the signals charging is gone.
im sure its not the battery. coz i did get a charger, the one where u put probes on the + and - terminal of the battery, it charged. the battery is working now. however, i couldnt charge via the phone.
the red light came up before which indicates not charging so what do i do now?
someone suggested to hard reset it. i tried it but nothing. still the same. i reflashed it... nothing... now using the hyperdragon rom... still the same...
any ideas?
btw, when i plug in the charger, amber light is there... however, not for long, light turns off, but the charging / plugged into the charger symbol is there
as far as my personal experience goes, i have noticed this behavior only when the battery overheats while charging. in the hottest weather, this has NEVER happened for me. it only happens sometimes if my device screen is on WITH wifi WITH bluetooth WITH data connection WITH some heavy processing program running. this causes heating of the components and also leaves little power to charge the battery, because most of the charger's power is being redirected to power the components in use.
so, the device will charge for a few minutes and will interrupt the charging if the temperature rises. the charging will resume again when the temperature comes back down.
you can test if this is happening with your device by observing how long it charges before stopping, first without a fan and then with a fan blowing over the battery with the back cover removed.
if the charging lasts longer when the device is being cooled with a fan, then you are likely facing temperature issues.
xxxpongxxx said:
btw, when i plug in the charger, amber light is there... however, not for long, light turns off, but the charging / plugged into the charger symbol is there
Click to expand...
Click to collapse
Try to clean your battery terminals and see if that can help... http://forum.xda-developers.com/showthread.php?t=358136
Also check here http://forum.xda-developers.com/showthread.php?t=448467
Your same issue
solved my problem...
i was so pissed, all the solutions did not work... i decided to open it up
when i opened it, i saw that there is some dirt / corrosion on some lines
cleaned each and every one of them.
while it was open, plugged in the battery... then the charger...
after 2 minutes... battery bar went up! it is now charging!!! and
best thing... it also syncs!
Good to know that you solved your problem.
thanks so much. its ur post that really helped
lucky you , now mine cant even charge . Even charge the led indicator turn red not orange for few hours
johnkor said:
lucky you , now mine cant even charge . Even charge the led indicator turn red not orange for few hours
Click to expand...
Click to collapse
u opened it up also? my main problem was. when my battery drained, the led was red... didnt turn orange even when its plugged for more than an hour already
same thing
johnkor said:
same thing
Click to expand...
Click to collapse
did u try opening it already? coz mine never got wet, maybe its the moisture in the air, eventually... accumulating in there...
Ok basically I had my first battery drained completely (my phone was around 1 year ++).
I've been experiencing battery drains on my phone such that it is discharging faster than it chargers and I also realized that I'm unable to connect to the PC/ unable to mount SD card.
Knowing that my problem exists, I went on to a repair shop and they replaced my port for $S90 SGD. After replacing my port, I was happy that my phone can finally be connected to my PC without any problems..
Until one day, I realized my phone was discharging faster and soon it reaches 0% on my screen. I quickly plugged in the AC wall adapter and continuing using (by right it shouldn't go flat). To my surprise it went flat and I couldn't charge my battery at all, I was having the Orange LED light.
So I went to the repair shop again and they sort of bumped my battery up and charged my phone. Seeing that my battery discharges faster than it charges, they told me they my battery is damaged and so I went on to get a new battery...
New battery came, I plugged in, turned my phone on successfully without any problems. Battery was at 65%. I left it few hours to charge and WTF my battery turns to 19% and eventually flatten out again .
Now here's the thing.
My 1st battery, (Totally unable to charge, No blinking orange LED)
My 2nd battery, when I leave it for a few hours (I plugged it in and there's orange LED), and soon there's not even an orange LED light anymore.
I really do not know what the hell is wrong with my phone. I'm so disappointed. I just thought that it might not be my battery's problem because a brand new battery shouldn't have any problems..
Really need some advice noww :crying:
Gonna cry. Wth is wrong with my phone?!
xLuck515 said:
Really need some advice noww :crying:
Gonna cry. Wth is wrong with my phone?!
Click to expand...
Click to collapse
You might have apps that are drawing too much current, a charger that's not supplying enough or is not recognized as ac charging.
Install current widget or something similar to see both how fast your battery is draining and how much current the charger is supplying.
xLuck515 said:
Really need some advice noww :crying:
Gonna cry. Wth is wrong with my phone?!
Click to expand...
Click to collapse
My old Inc S did the same thing as what your describing, and the charger port was faulty. I had to wiggle the cord into the perfect position to get it to charge, and even then it only actually charged half the time. Got it replaced by bell.
When you plug your charger cord in, does it wiggle a lot to the left or right? As in more that it normally should?
Nonverbose said:
You might have apps that are drawing too much current, a charger that's not supplying enough or is not recognized as ac charging.
Install current widget or something similar to see both how fast your battery is draining and how much current the charger is supplying.
Click to expand...
Click to collapse
The problem is I can't even turn on my phone at all to install any apps because my battery is completely drained. I just don't get it how come my phone drains the battery faster than it charges. Perhaps it's my charger not supplying enough power .
It's my second battery already and I'm now sure that it is not a battery problem.
Should I change an adapter (like maybe the iPhone adapter head) and use my usb cable to charge my phone. Will it provide more current
ZaySk said:
My old Inc S did the same thing as what your describing, and the charger port was faulty. I had to wiggle the cord into the perfect position to get it to charge, and even then it only actually charged half the time. Got it replaced by bell.
When you plug your charger cord in, does it wiggle a lot to the left or right? As in more that it normally should?
Click to expand...
Click to collapse
Well, I am not sure whether if it was charging port that was fault. It indeed charged when I tried my 2nd battery when it first came it had 65%. I went on to charge it and the percentage drops when it was charging (when the phone is off) . Perhaps it's not the apps that are draining all the current.
My phone is losing current... My 2nd battery is also completely drained off after sometime and I'm unable to on my phone. Irritating max.
My charging port just got replaced because I cannot mount my SD to the computer and I had it replaced and I was able to connect to the computer and LED indicates it charges.
What could be the other reasons that my phone is losing current? I'm not sure about hardware parts, but maybe perhaps it's the charging gland or whatever things inside the phone that is damaged?
Leave charger plugged in while light flashing. If the light goes off unplug and plug again. You might need to do a few times but the orange light should stay on eventually. Let it charge a while before switching back on. Good luck.
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Celestial Fury said:
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Click to expand...
Click to collapse
no you can't speed up charging. Charging speed is limited to cable quality, AC plug quality and software/hardware restrictions.
the USB on PC and magnetic cable combo for some reason helps to start the phone like you do when you want to recharge an depleted car battery.
It just open the circuit and let the phone charge again.
someone please confirm if this works for more than one person/situation.
Thanks for assistance btw, hopefully it works for all of us.
Nope doesn't work.
I tried it already.
Sorry guys.
Worked for me. Took some time before PCC registered it though.
help me please
Asadroid said:
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Click to expand...
Click to collapse
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
pheel said:
Nope doesn't work.
I tried it already.
Sorry guys.
Click to expand...
Click to collapse
did the computer detected the phone but for a brief moment like trying to install the drivers?
Kirkymole said:
Worked for me. Took some time before PCC registered it though.
Click to expand...
Click to collapse
@Kirkymole;
can you share what you did exactly and what i can up to the guide?
and im glad that i could help you
momo-infos said:
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
Click to expand...
Click to collapse
as i told you on the PM write up how you bricked it exactly and what steps have you done so i can help you correctly.
i will post pictures of the procedure of how i did it when i get a few hours to edit and upload it.
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Video instruksion would be very helpfull maybe
Asadroid said:
did the computer detected the phone but for a brief moment like trying to install the drivers?
Click to expand...
Click to collapse
Yes. But the computer simply recognised it as a normal "unknown" usb device with usb debugging disabled.
--
ruinkhan said:
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Click to expand...
Click to collapse
Exact same thing happened to me. "USB debugging off"
All I did was plug in the magnetic connector, then with the PC turned on and Pc companion running I plugged in the USB, it took about 20 minutes to recognise it but once it did, I unplugged it, left it on charge via the magnetic plug for around 5 hours and although the charging symbol never appeared it booted into recovery the normal way (I did that just to see what would happen) then restarted the phone via Cwm and it worked normally from then on.
Kirkymole said:
although the charging symbol never appeared it booted into recovery the normal way .
Click to expand...
Click to collapse
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
ruinkhan said:
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
Click to expand...
Click to collapse
The symbol that appears on the screen.
I also kind of used this method.
I directly plugged in, in these steps.
1) Plug in magnetic charging dock with 1A charger (Plugged USB into charger)
2) Plug in USB with 2.1A charger (Plugged USB into charger)
Dim-ish red light popped up and the phone began booting.
Plugging into the phone for me wasn't as effective as plugging into the charger as I left it for a while and nothing happened but upon plugging USB into my single dual port charger this method worked to get my phone onto the charging screen, Android L
Had to plug the USB in and out a few times, not too many times, but eventually it booted up to the charging screen.
Be patient is the key I suppose?
For me worked with magnetic and usb 1A charger! Thanks!