Hello!
I`m having problems with flashing a CM9, CM10 or CM10.1 ROM.
I tried once but didnt work at all,the phone just booted with the same ROM (ICS 4.0.4 Official)
Now i`m running on a stock ROM (2.3.4 / v20q) and i wanna know exactly what i must to in order to be able to flash CM9,10 or 10.1.
I have read about some ext4 and old/new bootloaders but i still dont get it,what ext i must use,what bootloader..i dont know..
Someone explain me please how to get the desired ROM.
Related
Hi,
This is my second time flashing a rom. I own a rogers captivate and I rooted and flashed to Darky's v7.0 (2.2 Froyo) NO WIPE.
I want to change the rom to Doc's ROM JPY V6.2 CE.
All i know is that I have to copy the .zip folder in sd card folder and flash it using rom manager. Do I have to do the same to flash with this one?
I have read all over the forum and I read that I am supposed to flash back to stock 2.1 and then flash again to a different rom(any other rom). Someone also told me that if I have a NO WIPE version of rom installed then I don't need to flash back to 2.1. Is this true? Can someone please confirm this?
1. Should i just download the rom and just flash through rom manager(if yes, then skip q#2) or change to stock 2.1 first?
2. If i have to change back to stock 2.1, i think I have to use something called ODIN. Can someone explain me the process please? and I dont know where to get stock rogers 2.1 rom. I looked all over the forum.
3. I do not want to overclock my phone cpu. The main post on DOC's rom says that I have to flash a kernel through CWM after first boot. I dont know what CWM means or how to use it. Any instructions?
4. Should I install the Wipe version or the NON-wipe version? and what is the difference? I like changing roms once in a while and I might change it again but I dont know which one I should use.
5. Is this a 2.1 eclair rom or 2.2 froyo? How do i figure it out without installing?
I would really appreciate if anyone can help me with these questions.
Thanks a lot.
I have always just booted into recovery mode with CWM and flash the zip that way as it works for any rom i have tried so far. I have rom manager but never used it to load a rom since CWM works flawlessly everytime for me.
The simple answer is if your changing ROMs (i.e. Cognition to Perception) - should flash back to stock then load the new ROM.
If your just updating an existing ROM and it has the "no-wipe" version? Then you should be able to run the *.zip provided following the instructions given (most likely through ROM Manager/CWM)
Well my problem is that I flashed my Gnote with ICS and now seems to be a problem with the kernels ( i read it here http://forum.xda-developers.com/showthread.php?p=26272631 )
So as that thread says, now i have to change the kernel by flashing with odin/heimdall, but i wanted to ask you guys if any kernel will work with my rom or not... and if you can give me a link with a safe one (i didn't find any link to say that is safe, although i have to confess that i haven't searched too much neither ) I have this ROM http://forum.xda-developers.com/showthread.php?t=1589375 but v01 and i'll upload a screencapture with the system info because i think that would be useful.
Thank to evereybody and lets hope that the problem is going to be fixed soon
SloanRH4 said:
Well my problem is that I flashed my Gnote with ICS and now seems to be a problem with the kernels ( i read it here http://forum.xda-developers.com/showthread.php?p=26272631 )
So as that thread says, now i have to change the kernel by flashing with odin/heimdall, but i wanted to ask you guys if any kernel will work with my rom or not... and if you can give me a link with a safe one (i didn't find any link to say that is safe, although i have to confess that i haven't searched too much neither ) I have this ROM http://forum.xda-developers.com/showthread.php?t=1589375 but v01 and i'll upload a screencapture with the system info because i think that would be useful.
Thank to evereybody and lets hope that the problem is going to be fixed soon
Click to expand...
Click to collapse
Flash this kernel to be on a safe kernel flash via Odin http://forum.xda-developers.com/atta...4&d=1337346991
Read here http://forum.xda-developers.com/showthread.php?t=1627854
the first link doesnt work, and about the second, what you want me to say is that is ok to flash the kernel they recommend there via odin and no need to change my rom right?
really thank you i was pretty worried about this problem...
WAIT
I think you should go back to stock GB and then use one of the safe kernels to install an ICS rom, like CM9.
I'm really a bit confused but this is from what I understand.
I still don't know what to do... does the kernel have to be combatible with the rom or it doesn't matter which ROM i'm on? for now i want to keep this ROM because works really good or to get the original ICS... so guys what do you say? Is it ok if i flash the kernel that brockyneo told me?
I would reccomend flashing the latest cm9 nightly as the rom your using is a old unoffical version of it. In order to do this flash the kernal i have attached via mobile odin (your phone will NOT boot using this kernal so make sure you go into recovery). Then flash the abyss note kernal via cwm, after which go into advanced and reboot recovery. Then in this recovery you can flash the CM9
Hope that helps
I recently upgraded my Note to official ICS (OTA) and I'm not liking it AT ALL! Now I really want to get far away from this update as possible and I'd like to switch to a CM9 nightly Rom. I've that now that I have upgraded to the official ICS Rom, I run the risk of super bricking my device. So now I ask you to help me make sure the following is correct so that I may move on from this wretched update:
DO NOT perform wipes if you are on original Samsung ICS
DO NOT perform wipes if you are on a original Samsung kernel??
Flash back to original Gingerbread Rom using odin BEFORE flashing to CM9
Flash to different kernel??
I've flashed millions of Roms but this one is scary and I just want to make sure haven't missed anything... Have I?
Thanks for you help!!
John J
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Akiainavas said:
Just flash a stock directly rootable GB rom, root and put CM9 on it. Then do a factory reset and you're good to go. Went that way few times already.
Click to expand...
Click to collapse
Thanks a lot man!! This is pretty much what I thought but I wanted to make ABSOLUTE sure! Cheers!
John J
So is the super-brick BUG on the official ICS OTA?? OMG
And yeah go back to gingerbrear via odin, get root then flash any CM9 tru CWM no problems...
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
darkmuck said:
I'd like to do something similar to what the OP wants to do however I have rooted and installed CWM on an official/stock ICS rom. So if I wanted to flash back to a stock gingerbread rom would I need to remove CWM and/or un-root?
Click to expand...
Click to collapse
There is no need to unroot first. You can flash stock GB rom directly via Odin.
I've now flashed to GB but before I move on to a CM9 nightly, do you recommend I flash the CM9 kernel as well? Seems like it is not a prerequisite but I would like to make sure. Thanks.
John J
afaik, when flashing a CM9 Nightly, the eligible kernel is built in, so no need to flash anything but the ROM.
i'm on one of imilkas first CM9 port and it says [email protected] #1 under Kernel version in settings.
Yes. The correct kernel is included in the nightly.
Hi Guys,
sorry for this noobie question but I'm quite new to android.
I've passed hours reading the forum about roms, kernels etc...but there are so much information for my little brain that now I don't know what to do...
So I'm on a GB 2.3.6 XXLC1 stock rom, with Franco's kernel 3.x version and I'd like to install Crisleko's ICS V7 ROM on my device but i'm not able to know how really to install it on the phone...the phone is full rooted. I wouldn't like to brick my note, so here's the reason of my question :
In my case, which is the most efficient way to install this rom ?
Sorry if this question has already been posted, but within all answer, I don't know what to do....
Thanks a lot for yout support.
You can flash the rom also directly from CWM. The reboot into recovery and select : _install zip from sd card _chose zip from sd card _select the criskeloRom zip _click yes ...... Flash it from Cwm i raccomend the Cwm app.from chainfire : _copy the rom to internal sd _start Cwm manager _ chose flash update _select criskelo Rom _click on yes...
I'm also afraid to hardbrick my device, and dude, i bought it 5 days ago lol
I had a Galaxy Nexus and flashed, installed new kernels, rooted, did everything.
I asked few ppl here and they said we should wait till the official ICS comes, it will take 1 or 2 weeks, better than hardbrick my note <3
Not quite because most bricks actually happen because of the stock ICS ROM.
Flash whatever you want, just remember to go from GB and not stock ICS, and remember - never do a factory reset while on stock ICS kernel.
If you need to do a factory reset, just flash a GB kernel, or flash GB stock with Odin, then wipe and flash ICS back.
Also, CM9 highly recommended
Ok guys, thanks a lot for answers. I've tryed to flash this rom and everything worked fine except the fact I'm a noobie and restore with TB Apps and user datas ^^. Now i'll know that user data don't have to be restored !
So I'm came back to my GB rom...
Maybe one more question :
I'll installed a new rom, I think i've understood what to do and what not to do with wipe from ICS roms but after wipe data / factory resest ans dalvik cache, is there a way to have a connection wizard software so a to set everything up because I had no data connection anymore ?
Thank a lot for your support
Hello Pascal-T,
I think I'm in the exact same position as you (except that I'm not rooted yet), but i'm also on GB LC1 and I want to go to Crisleko's ICS V7 ROM !
As I understood, you have directly install Crisleko's ICS V7 ROM on your rooted GB LC1 ? So it's not needed to install an other lower ICS ROM before going to the LQ3 of Criskelo ?
If yes this is great, then I just have to root my GB LC1, do a backup up with TB, and then I can follow Crisleko's ICS V7 ROM topic ? (At the begining I though I should first flash a stock ICM ROM but It seems to be THE THING TO AVOID).
If someone can just confirm these informations, that would be perfect
Thank you !
Well this seems like a perfect place for me to post Ive asked around, And searched a lot, But still cant figure this out. I dont wanna sound like a noob ( I am to the Note )
Ive been flashing and modding for years, Samsungs, HTC's, Sony Ericssons so I know what to do.
The thing is, All the threads I read about the bricking, and how to avoid it, Just keep forever linking me to different threads, and i end up back at the start. I dont have the Note yet (should be arriving any time) Im thinking of Only rooting for now as im not confident enough to flash without errors. But when i do, what i need to do is, Use ODIN to revert to GB (Unless it comes with GB) then:
1, Flash CF-ROOT kernel
2, Flash abyss safe kernel in cwm
3, reboot back into cwm
4, Do a full wipe
5, Install a ROM
Is that right ? I like the look of PA but would like to try a modded stock ROM to start with, So any recommendations ?
TIA
A-D
Hi,
I would like to know the rom flashing sequence like if I got a P1000 4.04 CM 9, and i want to upgrade to CM11
then what path should I take?
Can I flash the 4.22 rom directly?
or 4.04 --> 4.1 --> 4.2
or need to back to 2.3 and flash to 4.2?
I searched some posts but I cannot find the answers
I know there is some sequence and if not follow, may brick the phone.
Since your cm9 could be of old mtd (prior to April 2012), you better restock, then flash overcome kernel or any cwm, then flash cm10 or any kernel that has TWRP recovery, then cm11.
Sent from my GT-N7100 using xda app-developers app
ultramagneto said:
Hi,
I would like to know the rom flashing sequence like if I got a P1000 4.04 CM 9, and i want to upgrade to CM11
then what path should I take?
Can I flash the 4.22 rom directly?
or 4.04 --> 4.1 --> 4.2
or need to back to 2.3 and flash to 4.2?
I searched some posts but I cannot find the answers
I know there is some sequence and if not follow, may brick the phone.
Click to expand...
Click to collapse
There is no need to restock and no need to go step by step...
Which one of the available CM11 4.4.2 ROMs do you intend to use? I had pretty much all of them working at one point or another.
I ended up running the latest storm31 ROM in DALVIK mode with the PDROID patch.
ART or DALVIK is another question you will have to answer for yourself before you start.
Are you running on TWRP or Clockworkmod Recovery?
You should have Odin or Heimdall ready in case something goes wrong for a fast restore of a working boot image. That saves you from any possible need to restock.