Related
well i saw this theme for my LG O2x, theme called Utlimate sence 3.0
it looked very nice, did everything what stoot in the guide except changing my rom to macado's. so i installed en and rebooted and now it reboot time after time.
does anyone know how to get my stock rom back, i cant get it to connect with my PC anymore only trhoughout ROM manager i can do somthings and i can put files on my external SD.
pls someone be my hero! happend before with my HD2 and i actually dont want to buy another phone!
balzo said:
well i saw this theme for my LG O2x, theme called Utlimate sence 3.0
it looked very nice, did everything what stoot in the guide except changing my rom to macado's. so i installed en and rebooted and now it reboot time after time.
does anyone know how to get my stock rom back, i cant get it to connect with my PC anymore only trhoughout ROM manager i can do somthings and i can put files on my external SD.
pls someone be my hero! happend before with my HD2 and i actually dont want to buy another phone!
Click to expand...
Click to collapse
you don't have to buy antoher phone, it's just the software not hardware
do you backup first before applying the theme(at least titanium backup)? you can flash from smartflash with these stock roms
Code:
http://forum.xda-developers.com/showthread.php?t=1035041
antec123 said:
you don't have to buy antoher phone, it's just the software not hardware
do you backup first before applying the theme(at least titanium backup)? you can flash from smartflash with these stock roms
Code:
http://forum.xda-developers.com/showthread.php?t=1035041
Click to expand...
Click to collapse
i cant acces my phone, so how can i use smartflash?
i downloaded a stock rom, i formatted my SD, put the stock rom in and now what?
(im very brainless in these subjects)
ok i managed to flash it.
what now?
balzo said:
ok i managed to flash it.
what now?
Click to expand...
Click to collapse
Did u wipe the dalvick & cache partition before u flashed it? And u did make sure the theme was compatible with the rom before u tried to flash it?
Sent from my Inspire 4G using xda premium
balzo said:
ok i managed to flash it.
what now?
Click to expand...
Click to collapse
now after smartflash done you can
1. setting your phone like language, location, dll
2. restore your backup(if you use titanium backup) if not then you must do install again your
apps or at least you already save your apk using appsaver
there is the tutorial how to flash using smartflash
I suspect your initial problem was that you didn't wipe the phone before installing the MoDaCo ROM.
Before I install a new rom or restore a backup - I always make an (I call it) extended Fullwipe. So I can be sure that the system is fully clean.
Here is the way how to do it:
Go to CWM recovery and run the following steps
wipe data/factory reset
wipe cache partition
->advanced
wipe Dalvik Cache
wipe Battery Stats
<- Go Back
->mounts and storage
format /cache
format /data
format /system
<- GoBack
After that you can choose "Install zip from sd" or "Backup/Restore"
Greetz Paki
Paki0402 said:
Before I install a new rom or restore a backup - I always make an (I call it) extended Fullwipe. So I can be sure that the system is fully clean.
Here is the way how to do it:
Go to CWM recovery and run the following steps
wipe data/factory reset
wipe cache partition
->advanced
wipe Dalvik Cache
wipe Battery Stats
<- Go Back
->mounts and storage
format /cache
format /data
format /system
<- GoBack
After that you can choose "Install zip from sd" or "Backup/Restore"
Greetz Paki
Click to expand...
Click to collapse
i done all that stuff and when i try to install the stock rom, it says
Finding update packaage...
opening update package...
installing update...
and after a matter of seconds
Installation aborted...
Ohh...that's a pitty!
Which stock rom package do you want to install and which version of CWM do you use?
Have you tried to install the stockrom with the smartflash-tool?
Paki0402 said:
Ohh...that's a pitty!
Which stock rom package do you want to install and which version of CWM do you use?
Have you tried to install the stockrom with the smartflash-tool?
Click to expand...
Click to collapse
BIN_LGP990AT-00-V10a-NEU-XXX-FEB-23-2011+0
BIN_LGP990AT-00-V10b-NEU-XXX-APR-05-2011+0
BIN_LGP990AT-00-V10c-NEU-XXX-JUN-22-2011+0
these stockroms i have tried for the Netherlands, except to upper one, i dont know if these roms are different from each other, but im trying the FEB 23 now.
Ok,
if you speak german then have a look at this instruction:
http://goo.gl/NrYG6
Maybe I can help you better in my native language.
Greetz paki
balzo said:
BIN_LGP990AT-00-V10a-NEU-XXX-FEB-23-2011+0
BIN_LGP990AT-00-V10b-NEU-XXX-APR-05-2011+0
BIN_LGP990AT-00-V10c-NEU-XXX-JUN-22-2011+0
these stockroms i have tried for the Netherlands, except to upper one, i dont know if these roms are different from each other, but im trying the FEB 23 now.
Click to expand...
Click to collapse
why don't you use this BIN_LGP990AT-00-V10d-NEU-XXX-JUL-25-2011+0?
Hi there,
I had 2.3.4 and it had error and decided to install 2.3.5 and now i have a same problem, could you please advise how to make CLEAN installation by deleting all old system files? I did factory reset and cache cleaning before and after installation but that not helps as i guess that not touch system files.
Please advise. Thank you.
Wisehand said:
Hi there,
I had 2.3.4 and it had error and decided to install 2.3.5 and now i have a same problem, could you please advise how to make CLEAN installation by deleting all old system files? I did factory reset and cache cleaning before and after installation but that not helps as i guess that not touch system files.
Please advise. Thank you.
Click to expand...
Click to collapse
go to advanced and then format system, that will clean all system files. You can the flash whatever, make sure you have a backup.
krarvind said:
go to advanced and then format system, that will clean all system files. You can the flash whatever, make sure you have a backup.
Click to expand...
Click to collapse
I dont see "advanced" in recovery, where is it?
Wisehand said:
I dont see "advanced" in recovery, where is it?
Click to expand...
Click to collapse
you do have a rom with cwm recovery?
-Liam- said:
you do have a rom with cwm recovery?
Click to expand...
Click to collapse
Nope, I dont have cwm recovery on my phone, how to install it?
And is that OK if i perform full system format and only then will install new ROM trough ODIN?
Thanks
I'd just flash a rom that comes with cwm. There's plenty, then yes, Odin flash whatever rom you like.
download JVS from a xda thread or samfirmware.com
flash it via odin1.7 or odin1.8 with repartition ticket
there is many guides floating aaround searching is a good way to start
cheers
Wisehand said:
Nope, I dont have cwm recovery on my phone, how to install it?
And is that OK if i perform full system format and only then will install new ROM trough ODIN?
Thanks
Click to expand...
Click to collapse
Just flash chainfire's rooted kernels via odin. They come with cwm.
Wisehand said:
Nope, I dont have cwm recovery on my phone, how to install it?
And is that OK if i perform full system format and only then will install new ROM trough ODIN?
Thanks
Click to expand...
Click to collapse
well if you have recovery 2e (go into recovery mode and the writing should be blue and say the the top recovery 2e) it's as simple as downloading ROM manager from the market, clicking flash clockwork mod, restarting then booting into recovery. if you're in 3e you might have to use odin
Thank you all! I made root and advanced recovery where I formatted system, made delvik cache, etc, cleaned everything and installed again 2.3.5 but i still receive original error...after call i loose connection and see that error "Sorry! The process com.android.phone has stopped unexpectedly. Please try again." After i push "Force close" connection become available again...
That problem started when i installed 2.3, then i tried 2.3.4 and same error, now after system format on 2.3.5 same error..
Any ideas?
Hi all,
I know similar questions have been asked literally hundred times, but as a complete noob to roms, I want to make sure that I get a full set of instructions and then I won't brick my phone. I want to upgrade my note to this JB Rom by cronosmachine. I'm on stock ICS 4.0.4. Never rooted or did modding to the phone. No kernel change (which I know nothing about), nothing.
I'm not sure how much info you guys will need but here are the basics:
Baseband version: N7000XXLRB
Kernel version: 3.0. 15-1115729
[email protected] #3
SMP PREEMPT Thu Sep 20 00:40:29 KST 2012
Build number: IMM76D.ZSLPN
I know that I have to first root my phone to get CWM? My guess is to follow method 1 on [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM?
And then from there I don't know what to do in order to get the ROM onto my phone.
And is there anything else I need to be aware of?
Appreciate any kind of help.
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
nokiamodeln91 said:
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
Click to expand...
Click to collapse
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
rcheung28 said:
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
Click to expand...
Click to collapse
Yes, bas band refers to the modem, Build Number is rom.
Sent from my GT-N7000 using xda premium
Thanks SpyderTracks.
One more question before I pull the trigger, can all this be done with the "internal" SD card? Or does it have to be an external SD?
stock recovery doesnot allow installation from internal SD. so external is required. but you can use PC odin to install it, but it will leave a yellow triangle and increase the counter. later you can use triangle away app to reset it, Final call is yours.,
So after I installed philz's root and safe kernel, I went into recovery to wipe data cache system, went also wiped dalvik. Then I went to the main menu, chose install zip, tried to select choose zip from sdcard, but it keeps giving me this error: E:Can't mount /sdcard/
Nevermind, I managed to install from internal SD. But I'm not liking the ROM that much, so I plan on flashing CM10 Nightly to try it out.
On the CM10 thread, it says that I shouldn't be on a ROM based on stock. What I want to do is to flash CM9. But in order to do that, I'm not sure if I'm already on a safe kernel (after rooting using dr.ketan's 1a method (Phil's)).
what rom are you on now?
nokiamodeln91 said:
what rom are you on now?
Click to expand...
Click to collapse
I'm on this rom, it's a tw based rom based on the leaked jb ls7?
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
nokiamodeln91 said:
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
Click to expand...
Click to collapse
I'm not sure either, I booted into recovery, went into Philz Settings > about, and got CWM base 6.0.1.5, and PhilZ Touch 3.00 (n7000).
And what you're saying is that if I'm on Philz xxls7 kernel, I can go right to flashing CM10, without worrying the "do not flash on stock based ICS fw" (even though I'm on jb)?
Yes.. you are on philz kernel and you can directly install CM10
nokiamodeln91 said:
Yes.. you are on philz kernel and you can directly install CM10
Click to expand...
Click to collapse
Thanks for the information. But I want to know what makes my case an exception from
- Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
Click to expand...
Click to collapse
.
I'm on a JB rom but it's based on stock, isn't that essentially the same as based on stock ICS?
the warning was when the safe ics kernels were not in effect.
nokiamodeln91 said:
the warning was when the safe ics kernels were not in effect.
Click to expand...
Click to collapse
Thanks for the quick reply!! When I get home, I'll try this out!
So what I need to do is
put the zip files onto my SD,
reboot into recovery,
install the rom,
install google apps,
wipe data,
factory reset,
reboot into cm10
I don't need to wipe system/cache/dalvik??
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
nokiamodeln91 said:
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
Click to expand...
Click to collapse
Thanks a lot for guiding me through this, everything worked out perfectly!
great. now enjoy the cm10..:thumbup::thumbup::thumbup:
How come even after I performed format system cache data dalvik, some of the settings are still left on the phone? e.g. previously saved wireless networks, wallpapers... How can I completely start from scratch?
Hi,
I've just downloaded the latest ROM "GT_N7000_SweetROM_V5_base_LSF" for my Samsung Note GT-N7000. http://downloadandroidrom.com/file/GalaxyNote/roms/SweetJB/GT_N7000_SweetROM_V5_base_LSF.ziphttp://downloadandroidrom.com/file/GalaxyNote/roms/SweetJB/GT_N7000_SweetROM_V5_base_LSF.zip Could anyone tell me how to install this ROM? Do I have to unzip this RAR-file first? And if so, what then? Could I make use of the program Odin3.
I still am quite new at this and I am always a bit uncertain when upgrading my phone. Again, I really could do with some good advice from one of you guys.
Thanks again!
Robert.
No need to unzip the file. it needs to be flashed using CWM recovery
nokiamodeln91 said:
No need to unzip the file. it needs to be flashed using CWM recovery
Click to expand...
Click to collapse
Thank you for your swift reply.
My phone is rooted and therefor I think I have CWM installed. Also, I earlier installed the RAR-file: N7000XXLSZ_N7000XENLS4_XEN, I think I can remember that it was also done with the CWM recovery; It went all smoothly. I know that I didn't have to wipe my phone and/or reset it into factory settings at that time. Is that still the same with this installation? Because I found this video on the internet http://www.cursed4eva.com/multi-window-galaxy-note/, which seems to say otherwise, and now I'm having second thoughts. Are you known to a video that would make it more clearly for me in how to act?
I hope to hear from you soon again.
Thank you,
Robert.
Ropie58 said:
Hi,
I've just downloaded the latest ROM "GT_N7000_SweetROM_V5_base_LSF" for my Samsung Note GT-N7000. http://downloadandroidrom.com/file/GalaxyNote/roms/SweetJB/GT_N7000_SweetROM_V5_base_LSF.ziphttp://downloadandroidrom.com/file/GalaxyNote/roms/SweetJB/GT_N7000_SweetROM_V5_base_LSF.zip Could anyone tell me how to install this ROM? Do I have to unzip this RAR-file first? And if so, what then? Could I make use of the program Odin3.
I still am quite new at this and I am always a bit uncertain when upgrading my phone. Again, I really could do with some good advice from one of you guys.
Thanks again!
Robert.
Click to expand...
Click to collapse
Why don"t you follow the installation instructions from the related Rom post ?
=> http://forum.xda-developers.com/showpost.php?p=39354863&postcount=984
Pralou06fr said:
Why don"t you follow the installation instructions from the related Rom post ?
=> http://forum.xda-developers.com/showpost.php?p=39354863&postcount=984
Click to expand...
Click to collapse
Hi,
I just read these instructions, but I still have so many doubts that I could really do with some extra help. I am sorry, that I sound like a real amateur but that's because I really am in this matter.
Like i said, earlier (a few weeks ago), I've eventually (after so many of my questions having answered by you guys) succesfully rooted my phone by installing the RAR-file: CWM-SuperSU-v0.87. I also succesfully installed the Dutch ROM version: N7000XXLSZ_N7000XENLS4_XEN and I also had to install the RAR-file: PhilZ-cwm6-XXLSZ-OXA-4.88.2-signed.
Now, reading your instructions in the link that you gave me:
1) Make a backup of your current ROM
2) Download Sweet ROM Team V5 and Philz JB Kernel and place on sd or external sd card (remember where you put it)
3) Boot cwm recovery
4) Flash any Philz JB Kernel (after 3.1 cwm) - available here
5) Reboot Recovery
6) Wipe Data/Cache/Dalvik (IMPORTANT)
7) Mounts Storage and Format System, Format Data AND Format PreLoad (IMPORTANT)
8) Flash Sweet ROM Team V5 JB
9) Wait until it says Reboot then Reboot phone. First install will take some time as it is building cache
could I not "just start" from point 5, or would that just not work? I still have the the RAR-file: PhilZ-cwm6-XXLSZ-OXA-4.88.2-signed installed on my ExternalSD-card and I've also placed the SweetRom on my ExternalSD-card...
Am I correct to presume I am losing all my data following this procedure?
Could you please link me to a video where I can watch the whole installation process as my guide?
Thank you again!
Robert,
Netherlands.
Fist take backup of apps , contacts, sms , call logs etc, Then Do follow instruction below
1) Reboot Recovery
2) Wipe Data/Cache/Dalvik (IMPORTANT)
3) Mounts Storage and Format System, Format Data AND Format PreLoad (IMPORTANT)
4) Flash Sweet ROM Team V5 JB
5) Wait until it says Reboot then Reboot phone. First install will take some time as it is building cache
Im a total novice when it comes to rooting. i did manage to root my N7000, but after a few hours my phone became quite muggy...i rebooted it and on reboot it said "upgrading".
Since then it has been unusable, i did the volume up/home/power button and tried a wipe data....phone still wont respond well. keyboard doesn't work, cant get a signal, and its generally so groggy, its pretty much unusable. i managed a factory reset with phone switched on, still no better.
any help would be massively appriciated
Adam:crying:
Relax mate! Am guessing a simple flashing of the stock firmware will solve ur issue.
Sorry, but wrong section mate! Please report this thread to the moderators and have it moved here:
http://forum.xda-developers.com/forumdisplay.php?f=1410
"To err is human, to forgive is divine"
Sent from my SGS II
Hey
Hey well ..
You need to publish some information like how you rooted your phone and which firmware you installed after rooting. ??
Please use CM .. and any of its mod its smooth and safe with less bugs in it .. first publish all these information and i may be able to tell you how exactly you can proceed.
Amm31c said:
Hey well ..
You need to publish some information like how you rooted your phone and which firmware you installed after rooting. ??
Please use CM .. and any of its mod its smooth and safe with less bugs in it .. first publish all these information and i may be able to tell you how exactly you can proceed.
Click to expand...
Click to collapse
Hi
I didnt install any firmware. i used a root apk, but have forgotten the name of it. i donwloaded busy box, and all the other relevant things, CSWM or whatever it is
adam.male said:
Hi
I didnt install any firmware. i used a root apk, but have forgotten the name of it. i donwloaded busy box, and all the other relevant things, CSWM or whatever it is
Click to expand...
Click to collapse
This is what i used:
http://forum.xda-developers.com/showthread.php?t=2050297
Ok ..
First of all if you have properly rooted your android device with (clockwordmod recovery) or any other recoveries etc you need to have a Rom to flash it through this recovery
It is recommend that you must have safe kernel before flashing any ROM. Please download any of CM10.1 ROM from the link below
http://forum.xda-developers.com/showthread.php?t=1789397
Now Get the ROM for your appropriate device from the link below. Select the device and download the ROM. Use any Stable or Nightly version.
http://www.cyanogenmod.org/
Next thing you need to download Google Apps package called GAPPS. Its latest version corresponding to CM10.1 android version 4.2.2 is on the top of the screen. (20130301) using link below
http://goo.im/gapps
Put all the files to micro SD Card. Since your operating system is not working so you may have to take out SD card and put these downloaded zip files to SD card using jacket or your laptop SD card slot.
Now Switch ON your android device to Recovery Mode by Holding Volume Up+ Power and Home Button together
Do following:-
Wipe data/Factory reset.
Wipe Cache.
Wipe Delvik Cache in Advanced Options ..
Fix permissions.
then go to your SD card and flash all these files in order
Flash the Kernel first and after flashing Reboot Your Recovery.
Now Flash
1. CM 10.1
2. GAPPS
Reboot .. n enjoy your new rooted phone
If you still face difficulty let me know ..
TCHAO
Amm31c said:
Ok ..
First of all if you have properly rooted your android device with (clockwordmod recovery) or any other recoveries etc you need to have a Rom to flash it through this recovery
It is recommend that you must have safe kernel before flashing any ROM. Please download any of CM10.1 ROM from the link below
http://forum.xda-developers.com/showthread.php?t=1789397
Now Get the ROM for your appropriate device from the link below. Select the device and download the ROM. Use any Stable or Nightly version.
http://www.cyanogenmod.org/
Next thing you need to download Google Apps package called GAPPS. Its latest version corresponding to CM10.1 android version 4.2.2 is on the top of the screen. (20130301) using link below
http://goo.im/gapps
Put all the files to micro SD Card. Since your operating system is not working so you may have to take out SD card and put these downloaded zip files to SD card using jacket or your laptop SD card slot.
Now Switch ON your android device to Recovery Mode by Holding Volume Up+ Power and Home Button together
Do following:-
Wipe data/Factory reset.
Wipe Cache.
Wipe Delvik Cache in Advanced Options ..
Fix permissions.
then go to your SD card and flash all these files in order
Flash the Kernel first and after flashing Reboot Your Recovery.
Now Flash
1. CM 10.1
2. GAPPS
Reboot .. n enjoy your new rooted phone
If you still face difficulty let me know ..
TCHAO
Click to expand...
Click to collapse
Hi there
1st of all, when downloading the kernel, the attached files come up (please see attachment) what do i do with pictured files? the rest of your instructions i can probably manage
Thanks for your help btw
Adam
adam.male said:
Hi there
1st of all, when downloading the kernel, the attached files come up (please see attachment) what do i do with pictured files? the rest of your instructions i can probably manage
Thanks for your help btw
Adam
Click to expand...
Click to collapse
P.S
Although i haven't reached the 'recovery mode' part yet, i can tell you that the only options are:
reboot system now
apply update for external storage
wipe data/factory reset
wipe cache partition
apply update from cache
the delvik cache & fix permissions are not options
Adam
Here ur options
Two options with you
http://www.clockworkmod.com/rommanager
Download clockword mod recovery from here.
Again I recommend using Chasmado Kernel and it will automatically install safe recovery files. TWRC or CMD Recovery
Amm31c said:
Two options with you
http://www.clockworkmod.com/rommanager
Download clockword mod recovery from here.
Again I recommend using Chasmado Kernel and it will automatically install safe recovery files. TWRC or CMD Recovery
Click to expand...
Click to collapse
Hi there, and thanks again. so from what im understanding i just need to download clockword mod recovery and a kernal, put it on my sd card, put into recovery mode and install from there?? like i say, in the rooting/techie world, i am an infant!
Thanks, Adam