Related
Smh the youtube function hates me... click HERE to watch the video...
Touchscreen not working right as of yet... I strongly suggest a USB mouse and Keyboard for this... Touchscreen is pretty much unusable at this time. I would appreciate any help that can be offered.
First start off downloading THIS. It is the ROOTFS.. first off it needs to have the /etc/fstab edited properly to include / as mmcblk0p11 instead of 13... I know I know... This is a work in progress....
Next download THIS... Contains the ubuntu kernel and boot information.. the boot.img and system.img are for your stock ANDROID rom of choice.. just extract the IMG's out of the roms and place them in the folder..
Download THIS and place it in the directory you extracted the above files to.
ADB does work.. and you can ADB into your tab.. I have not created Windows directions yet.. but you can pretty much run the same commands...
I AM NOT TO BLAME FOR ANYTHING! This REPARTITIONS your device and ERASES EVERYTHING... you must do a FULL ODIN to restore to STOCK.... I am NOT responsible for anything that happens to your device.
remember to chmod +x nvflash and the script...
And wait......... It takes about 20 minutes to flash everything... be patient..
When it is done flashing boot up like you were going to go into CWM recovery... Your recovery is now your linux boot image.. You can use NVFlash to flash back CWM to apply whatever and just flash the linux.img back to partition 8 to get ubuntu back..
Thanks again to LilStevie.. without him this would not be possible...
my github code is availabe here.
If you would like to donate for my work and to the OMFGB/OMGB build box which I own and run click HERE
I'll pretty this up when I have a free minute...
Will this work if one has a locked bootloader?
Nice work, Poitee.
Sent from my Galaxy Tab 10.1 via Tapatalk
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
BlueGoldAce said:
Will this work if one has a locked bootloader?
Click to expand...
Click to collapse
I don't have much experience with the locked bootloader SGT's... Im sorry I can't answer your question...
I'm sure there's tons of interest. These tab 10.1 threads seem so slow at times. a lot different then I'm used to. I'd keep goin with it bro. its gonna be sweet.
poitee said:
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
Click to expand...
Click to collapse
This would derinately be useful to me, even more so if it could be dual booted, although I suspect my locked bootloader could be a stumbling block. Thanks for the effort you've put in so far.
R
rob61280 said:
This would derinately be useful to me, even more so if it could be dual booted, although I suspect my locked bootloader could be a stumbling block. Thanks for the effort you've put in so far.
R
Click to expand...
Click to collapse
It does dual boot... what it does is make your recovery partition your boot partition for ubuntu..
as far as locked bootloader... Im not sure..
poitee said:
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
Click to expand...
Click to collapse
yes please definitely interested in getting a version which fully works with the touch screen , that would be awesome!!
Of course were interested. Stop slacking and get past an alpha stage to a bets stage so we can all play.
Goodwork
This is friken cool man!
Keep on it, i would love to have ubuntu+ touch screen working.
I have a locked bootloader, but I would love to see this dual boot along side of honeycomb.
Sent from my GT-P7510 using XDA Premium App
This is awesome! Great job. I can't wait for a dual boot setup.
This is awesome! Definitely keep up the good work. It should work on a locked tab no problem you'll just need to use Odin instead of nvflash so a bit of modification is needed to wrap those images into md5 files for Odin. If I have some free time I'll try it on my locked tab.
Wow I just saw the video and I'm very impressed, I can see this making my netbook redundant I'll try it out once it becomes odin flashable and I have the time to find out more about how it works.
Thanks again for the effort so far.
R
My GT shows up Wednesday this week. Ill definitely be giving this a go
poitee said:
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
Click to expand...
Click to collapse
Yes, I would love to see some Linux working on a galaxy tab with touch screen functioning at minimum.
I was following viewsonic grab Ubuntu thread since last December but developers never got it working. Also video drivers was generic ones without hardware acceleration, camera and sensors did not work either... but this was less important for me then touch screen functionality.
If you can make it happen then by all means you should continue...
nice...
would any of the existing tegra2 development from motorola help? they got ubuntu running on the atrix device.. maybe something can be used?
im pretty sure it can be distributed onto many devices, as the ventana platform is standard, but drivers for touch, panel etc is missing..
how did you get the boot changed? how is the bootloader able to boot between 2 different kernels? do you have the source for bootloader available?
poitee said:
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
Click to expand...
Click to collapse
Im into it, but not until the touchscreen and the clockwork is fixed
atticusmas said:
Im into it, but not until the touchscreen and the clockwork is fixed
Click to expand...
Click to collapse
+1. I agree, especially about the Touchscreen, not many have the USB adapter to play around with it so that's probably why the reply count is low.
I think once it's usable without a mouse and keyboard you will see an explosion of interest in this. It's really a good idea to... really opens up the power of these things. Android is nice but it's kiddy stuff compared to a full blown Linux distro.
Linux for Tegra should help provide native 3D acceleration and stuff to If I'm not mistaken... I see a bright future for Ubuntu on tablets. (for nerds like us anyways )
Please don't stop development! lol I really look forward to it
CM10.1 UNOFFICIAL (PREVIEW) for Droid Razr HD (XT926) - Consumer and Developer Edition
Well I have been working for a while and decided to release a preview build MEANING IT'S JUST A GLIMPSE OF THINGS TO COME NOT A DAILY DRIVER ....So here it is CM10.1 (4.2.1) for the Droid Razr HD. This will work on both the retail consumer edition with SafeStrap3 and on the developer edition with CWM or TWRP recovery.
Thanks as always to:
Hashcode for always answering my questions
DroidTh3ory for getting me into this
Epinter for helping me get the ball rolling and fixing wifi and other things
Google for the source and awesome android
CM for all the mods and code fixes
Click to expand...
Click to collapse
OK first things first:
SafeStrap Version 3 for Consumer edition can be found here: http://goo.im/devs/H...rap-3.05.17.apk
Follow the install and use instructions here: http://blog.hash-of-...w-to-safestrap/
Onlly install in RomSlot-1 in SafeStrap3
Click to expand...
Click to collapse
Developer Edition:
CWM Recovery: http://goo.im/devs/H...ry-vanquish.img
TWRP Recovery: http://goo.im/devs/H...ry-vanquish.img
Click to expand...
Click to collapse
Working features:
Data: Comes up in 4G
SMS/MMS: You may get random texts from VZWNMN Google for instructions to disable this
WIFI: Working in SafeStrap now as well thanks to some init*rc magic
Bluetooth: Turns on..status untested
12-5 Fix SafeStrap boot
Click to expand...
Click to collapse
What doesn't work (that I know of):
Audio in-call, NFC, Camera, Wifi Hotspot
Click to expand...
Click to collapse
Download link: http://goo.im/devs/Hashcode/vanquish/cm-10.1-20121210-UNOFFICIAL-vanquish-preview.zip
GAPPS: http://goo.im/gapps
All source modifications can be found at: http://github.com/STS-Dev-Team
As always enjoy and have fun!
dhacker29 said:
CM10.1 UNOFFICIAL (PREVIEW) for Droid Razr HD (XT926) - Consumer and Developer Edition
Well I have been working for a while and decided to release a preview build MEANING IT'S JUST A GLIMPSE OF THINGS TO COME NOT A DAILY DRIVER ....So here it is CM10.1 (4.2.1) for the Droid Razr HD. This will work on both the retail consumer edition with SafeStrap3 and on the developer edition with CWM or TWRP recovery.
OK first things first:
Download link: http://goo.im/devs/Hashcode/vanquish/cm-10.1-20121210-UNOFFICIAL-vanquish-preview.zip
GAPPS: http://goo.im/gapps
All source modifications can be found at: http://github.com/STS-Dev-Team
As always enjoy and have fun!
Click to expand...
Click to collapse
This really is an awesome accomplishment. I ran it for awhile but had to switch back. Even so it was smooth as silk. If I had known in call volume was a maybe I would have tested before flashing back. Sorry dh.
Sent from my DROID RAZR HD using Tapatalk 2
donated, thank you so much! will definitely donate again as more progress is made.
Would love to see this on the XT925, I know it's too much to ask lol.
Good job!
Sent from my XT925
so glad to see wifi is working i just flashed this cant wait to see this a daily driver
Royalfox said:
Would love to see this on the XT925, I know it's too much to ask lol.
Good job!
Sent from my XT925
Click to expand...
Click to collapse
I would image it could work on XT925...since his CM10 XT926 boots on even MB886.
Sent from my MB886 using Tapatalk 2
How long before a daily driver edition is out? I'm new to CM so sorry if this is a question I shouldn't be asking
thibaulb said:
How long before a daily driver edition is out? I'm new to CM so sorry if this is a question I shouldn't be asking
Click to expand...
Click to collapse
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
mattlgroff said:
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
Click to expand...
Click to collapse
Ok sweet. sorry if I offended anyone or anything by asking that
mattlgroff said:
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
Click to expand...
Click to collapse
+1
Awesomeness
swboland said:
+1
Click to expand...
Click to collapse
Everything works great, only issue is play store always force closes, but fast as hell cant wait to see the progress
Noob here again
Is there a step by step instructions list for installing this? Also, what is Safestrap?
thibaulb said:
Noob here again
Is there a step by step instructions list for installing this? Also, what is Safestrap?
Click to expand...
Click to collapse
No one is going to help you out much because you didn't even read the first post. There are step by step instructions including the definition and what safe strap is and does. Oh. Welcome to the community.
P.s. their are threads on new users of this type of way of installation. Hope its not coming off harsh.
Sent from my DROID RAZR HD using Tapatalk 2
manuski said:
No one is going to help you out much because you didn't even read the first post. There are step by step instructions including the definition and what safe strap is and does. Oh. Welcome to the community.
P.s. their are threads on new users of this type of way of installation. Hope its not coming off harsh.
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
Sorry for my lazyness. I couldn't view the link about safestrap because I'm at work and the site is blocked. I probably should have mentioned that in my post. I'll just check it when I get home. As far as step by step instructions, I was referring to the whole installation of CM10, rather than just the installation of safestrap
You said "Their are threads on new users of this type of way of installation". I've read over that a few times and don't quite understand what you mean. I haven't dug super super deep into these forums but I didn't see any threads about how to install CM10.
Thanks for the help
What if I:
Nandroid backup via safestrap
Install this on my xt925 to test
Is there a possibility to perma-brick or have a screwed up radio that I wouldn't be able to fix? I want to flash and play with it, but only if I can get back with a nandroid.
Actually can't I flash anything I want on a rom slot with safestrap? Can't I just go back to the stock slot at anytime?
---------- Post added at 07:09 PM ---------- Previous post was at 06:18 PM ----------
Got impatient and tried it on slot 1. Nothing worked as expected, it booted but no radios or anything would respond. I just deleted rom slot 1 and I'm back to stock.
I guess my question is, how much do I have to donate to get a working version of this for the xt925?
seh6183 said:
What if I:
Nandroid backup via safestrap
Install this on my xt925 to test
Is there a possibility to perma-brick or have a screwed up radio that I wouldn't be able to fix? I want to flash and play with it, but only if I can get back with a nandroid.
Actually can't I flash anything I want on a rom slot with safestrap? Can't I just go back to the stock slot at anytime?
---------- Post added at 07:09 PM ---------- Previous post was at 06:18 PM ----------
Got impatient and tried it on slot 1. Nothing worked as expected, it booted but no radios or anything would respond. I just deleted rom slot 1 and I'm back to stock.
I guess my question is, how much do I have to donate to get a working version of this for the xt925?
Click to expand...
Click to collapse
do·na·tion
/dōˈnāSHən/
Noun
Something that is given to a charity, esp. a sum of money.
The action of donating something.
Synonyms
gift - offering - grant - present - donative - endowment
Click to expand...
Click to collapse
Maybe you don't understand what a donation is
Epinter has an XT925 CM10 in this board, check that out.
Dhacker are you the only developer with a droid RAZR HD?
Sent from my DROID RAZR HD using Tapatalk 2
mattlgroff said:
Maybe you don't understand what a donation is
Epinter has an XT925 CM10 in this board, check that out.
Click to expand...
Click to collapse
I don't want to void my warranty just to install cm10. I'm hoping for a safestrap version.
seh6183 said:
I don't want to void my warranty just to install cm10. I'm hoping for a safestrap version.
Click to expand...
Click to collapse
Ah because of the need for an unlocked bootloader?
Sent from my DROID RAZR HD using Tapatalk 2
How's the battery life on this comparatively? Any rough feelings on % improvement?
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
New Unified (moto_msm8960) by @hachamacha
http://forum.xda-developers.com/showthread.php?t=2686374
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Older device specific (mb886)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Thank you sir as always. This time is just a thank you x 1000000= priceless
I can't try until tomorrow at the earliest, but can anyone see if "install zip from sideload" works?
Sent from my MB886 using Tapatalk
B.A. dude. This is hella tight lol @Phil3759 great job!
Sent from my MB886 using XDA Premium 4 mobile app
Great work. Posted link earlier on the other thread, didn't want to start another. Nice to have the actual dev do so.
Thanks!
This is awesome, Thanks!
Anybody flash this and care to report what works and what doesn't. I just now saw this and I'll be flashing when I get home from work in a little while. I'm gonna assume that this works pretty good because there isn't a metric ton of posts about things not working.
The only problem I've noticed is that the CM updater doesn't seem to be passing the path to the update zip properly. I didn't have that problem with cwm recovery. However, I have a strange "/0/" in my internal storage path. Therefore, I can't blame either.
Backups, restores, and flashing seems to be working great! Love the customizable interface.
Sent from my MB886 using xda app-developers app
cbcomputing said:
The only problem I've noticed is that the CM updater doesn't seem to be passing the path to the update zip properly. I didn't have that problem with cwm recovery. However, I have a strange "/0/" in my internal storage path. Therefore, I can't blame either.
Backups, restores, and flashing seems to be working great! Love the customizable interface.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
because stock cwm uses non sense /sdcard/0 in its sources
If you like to use the updater from cm, just set recovery to /data/media
Else, avoid cm updater
I am not going to restore non sense /sdcard/0 things in my sources
Thanks for clearing that up for me. I was wondering what caused that. I've just been flashing the update zips manually.
Thanks for the awesome recovery!
Sent from my MB886 using xda app-developers app
skeevydude said:
Anybody flash this and care to report what works and what doesn't. I just now saw this and I'll be flashing when I get home from work in a little while. I'm gonna assume that this works pretty good because there isn't a metric ton of posts about things not working.
Click to expand...
Click to collapse
Sideload is working and everything else, but the console log is not shown correctly while flashing. After it ends goes back to normal.
m0ndul said:
Sideload is working and everything else, but the console log is not shown correctly while flashing. After it ends goes back to normal.
Click to expand...
Click to collapse
a better description or really a video during this will help me fixing it
Excellent app Phil, thank you
Sent from my MB886 using XDA Premium HD app
Phil3759 said:
a better description or really a video during this will help me fixing it
Click to expand...
Click to collapse
Here´s a video...
Please don't pay attention to my cracked digitizer...
m0ndul said:
Here´s a video...
Please don't pay attention to my cracked digitizer...
Click to expand...
Click to collapse
Many many thanks :good:
This is of real help, except breaking my neck to watch rotated video
I will dig into it as I cannot reproduce it here
Can you upload your settings file?
Code:
/data/philz-touch/philz-touch_6.ini
That way I can try to reproduce it
Phil3759 said:
Can you upload your settings file?
Code:
/data/philz-touch/philz-touch_6.ini
That way I can try to reproduce it
Click to expand...
Click to collapse
Here it is
截屏功能 bug 图像扭曲
The screenshot function bug image warping
That only works for some devices. Read original op linked on first post
m0ndul said:
Here´s a video...
Please don't pay attention to my cracked digitizer...
Click to expand...
Click to collapse
I was turning crazy to reproduce it until I saw you were using sideload
Please, can you confirm that the display bug happens only in sideload mode?
If you flash normally in recovery, the text fits right?
Phil3759 said:
I was turning crazy to reproduce it until I saw you were using sideload
Please, can you confirm that the display bug happens only in sideload mode?
If you flash normally in recovery, the text fits right?
Click to expand...
Click to collapse
That's right, only happens when sideloading. Choosing a ZIP from the internal memory or SDCard for flashing shows a correct command line output.
Introduction:
This is a restore zip for restoring/debricking a molly device (ADT-1).
The contents are as close to stock as possible, and is intended to fix broken otas.
Click to expand...
Click to collapse
File List:
update-molly-Stock-LPV79-1.zip
Click to expand...
Click to collapse
FAQ:
Will this fix my <non molly device>?
No, this rom is only for mollys, it will brick any other device.
Will OTAs work after flashing this?
Yes, that is the purpose of this
Do I need to be on a certain bootloader to use this?
No, it includes the original bootloader.
Do I need a custom recovery to flash this?
Yes, the stock recovery will not accept update zips that are not signed by google
Is this rooted?
No, the stock rom is not rooted, neither is this
My device won't finish booting after flashing.
If you were not originally on the same rom, you may need to do a factory reset to finish the process. Android does not like rom downgrades without a factory reset
Click to expand...
Click to collapse
Changelog:
Nov 3, 2014: Initial Page
Click to expand...
Click to collapse
2char
I made a gallery of it because I felt like it: Update - Imgur
Awesome! Thanks! I needed a way to restore my OTA abilities after rooting and doing some testing for someone. Did you make these yourself? And how? If you don't mind me asking. I didn't think dd would work without root.
death2all110 said:
Awesome! Thanks! I needed a way to restore my OTA abilities after rooting and doing some testing for someone. Did you make these yourself? And how? If you don't mind me asking. I didn't think dd would work without root.
Click to expand...
Click to collapse
All custom recoveries have root by default, my ADT1 isnt rooted, I did all my work though CWM.
TheManii said:
All custom recoveries have root by default, my ADT1 isnt rooted, I did all my work though CWM.
Click to expand...
Click to collapse
Duh. Didn't think of that... Haha. Thanks!
Could someone who has updated to LPX13D please post a system dump? Im needing it for an OUYA port that im working on. Thanks
It's already been posted here:
http://forum.xda-developers.com/showpost.php?p=56186872&postcount=69
death2all110 said:
It's already been posted here:
http://forum.xda-developers.com/showpost.php?p=56186872&postcount=69
Click to expand...
Click to collapse
Thanks, never would have found it there.
TheManii said:
2char
Click to expand...
Click to collapse
Thanks! Do you have to have a USB keyboard in order to move around in CWM on the ADT-1?
ScubaXsays said:
Thanks! Do you have to have a USB keyboard in order to move around in CWM on the ADT-1?
Click to expand...
Click to collapse
Yes a USB keyboard is needed to move around CWM on the ADT-1
death2all110 said:
Yes a USB keyboard is needed to move around CWM on the ADT-1
Click to expand...
Click to collapse
Thanks so much for the quick response, you're the best.
ScubaXsays said:
Thanks so much for the quick response, you're the best.
Click to expand...
Click to collapse
No problem. I had the same problem initially
death2all110 said:
Yes a USB keyboard is needed to move around CWM on the ADT-1
Click to expand...
Click to collapse
ScubaXsays said:
Thanks so much for the quick response, you're the best.
Click to expand...
Click to collapse
Yes you need a usb keyboard to use CWM currently, there may be an update in the future to enable the dev button on the back to select in cwm like it does in fastboot. Until if/when that happens you either need a keyboard or to do everything manually via adb.
I don't have a keyboard however, I did all my work/testing with only adb.
TheManii said:
Yes you need a usb keyboard to use CWM currently, there may be an update in the future to enable the dev button on the back to select in cwm like it does in fastboot. Until if/when that happens you either need a keyboard or to do everything manually via adb.
I don't have a keyboard however, I did all my work/testing with only adb.
Click to expand...
Click to collapse
Thanks for the articulate follow-up. I started to do things manually via ADB. :good:
anyone can post a complete lpx13D CWM backup , stock recovery or at least system.img
I've messed up my ADT1 and it can't seem to take the image I've found yet
@TheManii Are there any custom roms or anything like that for the ADT-1? I just got one in the mail from I assume google. I'm ready to begin , but I don't honestly know what people are interested in seeing on this device I have a madcatz mojo using all the adt-1 binaries except audio running cm-12 and android tv from this device. So if anyone is interested in that let me know please.
Unjustified Dev said:
@TheManii Are there any custom roms or anything like that for the ADT-1? I just got one in the mail from I assume google. I'm ready to begin , but I don't honestly know what people are interested in seeing on this device I have a madcatz mojo using all the adt-1 binaries except audio running cm-12 and android tv from this device. So if anyone is interested in that let me know please.
Click to expand...
Click to collapse
Hello UD,
There isn't any custom roms for the ADT-1 (So yours would be the first)
I for one would love to see a more recent build than the last OTA (LPX13D - OCT 29th) There have been rumors that we'd get the final Android Lollipop but nothing has surfaced.
How much work is involved in rolling an AOSP+ADT-1 Binaries+Android TV dependencies?
Cheers Rob.
halfluck said:
Hello UD,
There isn't any custom roms for the ADT-1 (So yours would be the first)
I for one would love to see a more recent build than the last OTA (LPX13D - OCT 29th) There have been rumors that we'd get the final Android Lollipop but nothing has surfaced.
How much work is involved in rolling an AOSP+ADT-1 Binaries+Android TV dependencies?
Cheers Rob.
Click to expand...
Click to collapse
It's possible https://www.youtube.com/watch?v=Og-GDeRhJno but I could not get all the apps correctly working the main one being playstore , but I will try again look at the android build number and build date. I basically made a google apps package based on the adt-1 this is before I had one so possibly now I can get us an aosp 5.0.2 base working the Mojo in terms of hardware is similar to the adt-1 and for me to boot 5.0 on the mojo I needed adt-1 updated tegra 4 binaries so this shouldn't be hard at all once I work out the playstore issues.
Unjustified Dev said:
It's possible https://www.youtube.com/watch?v=Og-GDeRhJno but I could not get all the apps correctly working the main one being playstore , but I will try again look at the android build number and build date. I basically made a google apps package based on the adt-1 this is before I had one so possibly now I can get us an aosp 5.0.2 base working the Mojo in terms of hardware is similar to the adt-1 and for me to boot 5.0 on the mojo I needed adt-1 updated tegra 4 binaries so this shouldn't be hard at all once I work out the playstore issues.
Click to expand...
Click to collapse
Wow that is really impressive work, The current build on the ADT-1 is flaky at best for me, i'd love to see how a more recent build performs and if it prevents me from having to do a daily reboot.
Cheers Rob.
@Unjustified Dev just got mine on Tuesday. are you thinking releasing sources on your team github. i saw that a device and kernel repository was created but they are empty.
PS: nice to talk to you again been a while.
Welcome to a world of new they called me walker or walkerblue
FLASH AT YOUR OWN RISK!!
Today im bringing you guys a twrp that still in works
If any devs that would like to help to get all working make our Z2 force page grow faster
I'll be making a hangout chat for devs only!
https://hangouts.google.com/group/ksHPFhZPgjPZBd292
TWRP boots so far for T-Mobile ,Sprint
First I want to thank these people for making everything easy and possible for us in XDA
Thanks to @shimp208 for making Minimal ADB tool easy to use and also thanks to TWRP team for making root easy
Okay now to install this recovery
First make sure you all all drives on computers installed
USB Link: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/78830/p/30,2625,665
ADB Link: https://forum.xda-developers.com/showthread.php?t=2317790
Beta recovery Link: https://drive.google.com/open?id=0BxohOX1FGysPaV9ObDVFVjNZWU0
Step Two: Ones you have all your files now you need is the commond to flash this recovery img
So in ADB tools make sure you put the recovery in the folder on where you have it located in your computer
then make sure you hit cmd-here or the icon app that tool left you on your desktop
Then ones that happens make sure you have debugging check on your device
then run this on cmd "adb devies" to make sure your device is listed
then after you have done that make sure you run this commend next "adb reboot bootloader"
ones you do that then your phone should take you too bootloader page then you can flash recovery file
then you will put this commend "fastboot flash boot beta.img""
then ones you do that make sure you use your arrows on your side of your device to get into recovery
Then BOOM your have your twrp flashed
Hit the Big Thumps up for me
Five Star this page
Share Share this page
Sweet bro! I just got this phone. Gonna try it out tomorrow. I was gonna try and build TWRP tomorrow. Thanks for doing the leg work!
Infect_Ed said:
Sweet bro! I just got this phone. Gonna try it out tomorrow. I was gonna try and build TWRP tomorrow. Thanks for doing the leg work!
Click to expand...
Click to collapse
still needs work but if get more people to do it help we can have it done before then and i can start to make a rom for this phone
walkerblue2023 said:
still needs work but if get more people to do it help we can have it done before then and i can start to make a rom for this phone
Click to expand...
Click to collapse
I Dev too. I have built DU, and Candy for the v20. Never released tho. I'm also a part of a new Rom project bring up that's working on Oreo. It's a reincarnation of Desolation ROM. So if you could share a link to your GitHub that would be awesome.
Infect_Ed said:
I Dev too. I have built DU, and Candy for the v20. Never released tho. I'm also a part of a new Rom project bring up that's working on Oreo. It's a reincarnation of Desolation ROM. So if you could share a link to your GitHub that would be awesome.
Click to expand...
Click to collapse
thier is no github for it yet but for some reason i was able to get it too boot kinda weird got the stock recovery and twrp recovery made it into one and thier you go it booted up on the phone but with no root
What tree did you use?
Infect_Ed said:
What tree did you use?
Click to expand...
Click to collapse
mk is only the one that booted it up
Sweet
Sent from my SM-N930F using XDA-Developers Legacy app
All good news!!
walkerblue2023 said:
mk is only the one that booted it up
Click to expand...
Click to collapse
What do you mean mk?
Infect_Ed said:
What do you mean mk?
Click to expand...
Click to collapse
My bad I mean mtk tool
Infect_Ed said:
What do you mean mk?
Click to expand...
Click to collapse
Z2 play what I used
[delete]
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
slaytanic said:
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
Click to expand...
Click to collapse
How if it boots for me I might have uploaded the wrong file
shouldn't it be "fastboot flash recovery beta.img"?
FrankenDroid said:
shouldn't it be "fastboot flash recovery beta.img"?
Click to expand...
Click to collapse
Recovery is in the kernel on this phone.
Sent from my Moto Z (2) using Tapatalk
Ah, interesting. I think it's probably time to get smart on this new partitioning stuff
slaytanic said:
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
Click to expand...
Click to collapse
Worked perfectly on my Sprint Z2 Force. Please don't bash a developer who is starting support for our device. @walkerblue2023 You can add Sprint model is working with this boot image. Thank you for adding your knowledge to our device!
Uzephi said:
Worked perfectly on my Sprint Z2 Force. Please don't bash a developer who is starting support for our device. @walkerblue2023 You can add Sprint model is working with this boot image. Thank you for adding your knowledge to our device!
Click to expand...
Click to collapse
thank you for the information and also cant wait for your kernel