Yesterday, I did unlock the bootloader, however, after that, he just gets on screen "Warning Bootloader Unlocked" and does not care anymore, what can I do?
willmedeiros said:
Yesterday, I did unlock the bootloader, however, after that, he just gets on screen "Warning Bootloader Unlocked" and does not care anymore, what can I do?
Click to expand...
Click to collapse
Sorry not quite sure what you are trying to say or mean do you mean that you unlocked you're phone and the bootloader message says warning unlocked bootloader and now the phone won't start
Sent from my XT890 using xda app-developers app
dog121 said:
Sorry not quite sure what you are trying to say or mean do you mean that you unlocked you're phone and the bootloader message says warning unlocked bootloader and now the phone won't start
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Sorry, I'm from Brazil, but it was just that he no longer starts after doing the unlock.
willmedeiros said:
Sorry, I'm from Brazil, but it was just that he no longer starts after doing the unlock.
Click to expand...
Click to collapse
Was the phone fully charged before you unlocked it can you get in to recovery??
Sent from my XT890 using xda app-developers app
dog121 said:
Was the phone fully charged before you unlocked it can you get in to recovery??
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
He was born when I unlock, now it just flashes the green light, vibrates, beeps and then dies again
willmedeiros said:
He was born when I unlock, now it just flashes the green light, vibrates, beeps and then dies again
Click to expand...
Click to collapse
Sounds to me like you have bricked your phone when you unlocked the bootloader did you use the Motorola website because unlocking the bootloader should not brick you're phone trying to root it can brick it if you're not careful
Sent from my XT890 using xda app-developers app
AW: [Q] Bootloader bricked
For me it sounds more like an JB > ICS RSD-brick. Unlocking or rooting (even with an wrong Kernel) won't destroy your ability to boot into the BL.
Sent from my XT910
dog121 said:
Sounds to me like you have bricked your phone when you unlocked the bootloader did you use the Motorola website because unlocking the bootloader should not brick you're phone trying to root it can brick it if you're not careful
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Apparently, the same happens to me. But, in my case, I was flashing the root files for JB with adb and the power got down in the middle of the process.
Now the phone is freeze in the unlocked bootloader warning and resets after some seconds.. eternal loop.
• If I press Power + Vol Down, the phone resets but don't get in the fastboot menu.
• Adb doesn't recognize the device / not even RSD Lite (All drivers are installed)
Is there any hope?
fgaulke said:
Apparently, the same happens to me. But, in my case, I was flashing the root files for JB with adb and the power got down in the middle of the process.
Now the phone is freeze in the unlocked bootloader warning and resets after some seconds.. eternal loop.
• If I press Power + Vol Down, the phone resets but don't get in the fastboot menu.
• Adb doesn't recognize the device / not even RSD Lite (All drivers are installed)
Is there any hope?
Click to expand...
Click to collapse
Before my stop completely, he was also in that infinite loop, ai tried putting several other bootloader, which gave al problem, I think the only way will be the same assistance.
AW: [Q] Bootloader bricked
To get into the Bootloader on JB you'll need some timing.
Press and hold Power & Vol. down to start the i. As soon as it starts vibrating release Power & hold only Vol. down.
If you guys flash an gpt. bin from an ICS Fastboot over the JB BL you kill your I (as seen above)
Sent from my XT910
HSD-Pilot said:
To get into the Bootloader on JB you'll need some timing.
Press and hold Power & Vol. down to start the i. As soon as it starts vibrating release Power & hold only Vol. down.
If you guys flash an gpt. bin from an ICS Fastboot over the JB BL you kill your I (as seen above)
Sent from my XT910
Click to expand...
Click to collapse
Maybe I've done that without realizing it, to exit without
HSD-Pilot said:
To get into the Bootloader on JB you'll need some timing.
Press and hold Power & Vol. down to start the i. As soon as it starts vibrating release Power & hold only Vol. down.
If you guys flash an gpt. bin from an ICS Fastboot over the JB BL you kill your I (as seen above)
Sent from my XT910
Click to expand...
Click to collapse
I feel stupid... I don't ever thought in release the power.
Now I've get in the bootloader and selected 'power off' to stop the resets and charge the battery.
After that, I will made some tests and post here.
---
Em brasileiro para facilitar as coisas:
Me sinto um idiota... Nem me passou pela cabeça soltar o power.
Agora consegui entrar no bootloader e selecionei 'power off', para desligar ele e parar com os resets para carregar a bateria.
Depois disso, vou fazer uns testes e potar os resultados aqui.
HSD-Pilot said:
For me it sounds more like an JB > ICS RSD-brick. Unlocking or rooting (even with an wrong Kernel) won't destroy your ability to boot into the BL.
Sent from my XT910
Click to expand...
Click to collapse
Deffinatly sounds like that was the way he went rsd flash now bricked difficult when they don't provide all the info and steps they took to get to the situation there in
Sent from my XT890 using xda app-developers app
dog121 said:
Deffinatly sounds like that was the way he went rsd flash now bricked difficult when they don't provide all the info and steps they took to get to the situation there in
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Deleted after I made unlocking the bootloader and have gotten into an infinite loop with the notice of release, after this, I tried to take this warning flasheando other BL, put the unit killed today and sent for technical assistance, I hope he comes back alive
willmedeiros said:
Deleted after I made unlocking the bootloader and have gotten into an infinite loop with the notice of release, after this, I tried to take this warning flasheando other BL, put the unit killed today and sent for technical assistance, I hope he comes back alive
Click to expand...
Click to collapse
Im sure it will good luck I bricked my first one aswell sent it for repair came back alive and well
Sent from my XT890 using xda app-developers app
willmedeiros said:
Deleted after I made unlocking the bootloader and have gotten into an infinite loop with the notice of release, after this, I tried to take this warning flasheando other BL, put the unit killed today and sent for technical assistance, I hope he comes back alive
Click to expand...
Click to collapse
Yesterday, after charge the battery, I uninstalled the drivers and installed them again, and tried to flash the retail room via RSD. It starts, but when the phone shut down to reboot, it died completely.
Now I try to turn it on, but only the led glows and the phone vibrates, nothing more. I tried all the possible combinations for pressing the buttons, but still the same.
Time to technical assistence... rsrs
Related
Urgent problem, try After rooter i my motorola razr in 4.1.2 with bootloader deblocker, the screen gets stuck with a message "WARNING BOOTLOADER UNLOCKER" stops and restarts the sequence I try to Resolve the problem with Pilama 3.0 rom nothing is happen. I'm stuck help me pleas if somebody has a solution.
I think you need to ask in the forum where they speak about fastboot files or how to recover.
Sent from my XT890 using xda app-developers app
Solution....
Reflash ICS's rom....
How?
1 - Hold the power button and the volume -, when vibrate, release the power button but hold the volume.
2 - Now, you're in Fast Boot.
3 - Download RSD Lite and ICS's rom http://sbf.droid-developers.org/smi/list.php
4 - Reflash using RSD Lite.
5 - When done, you need unbrick your device. Use this tuto: http://forum.xda-developers.com/showthread.php?t=2184877
6 - Now, you're in ICS and can upgrade to Jelly Bean =D
CAUTION!!!
PS: Im don't blame them for any damage caused in your device!!
Bricked phone
matheusgallo said:
Reflash ICS's rom....
How?
1 - Hold the power button and the volume -, when vibrate, release the power button but hold the volume.
2 - Now, you're in Fast Boot.
3 - Download RSD Lite and ICS's rom http://sbf.droid-developers.org/smi/list.php
4 - Reflash using RSD Lite.
5 - When done, you need unbrick your device. Use this tuto: http://forum.xda-developers.com/showthread.php?t=2184877
6 - Now, you're in ICS and can upgrade to Jelly Bean =D
CAUTION!!!
PS: Im don't blame them for any damage caused in your device!!
Click to expand...
Click to collapse
Hi, I have same problem from yesterday, but everywhere on forum is writen that downgrade from JB to ICS will brick device or in what is difference?
edit: aah 3. and 4. point bricks the phone and 5. unbricks it
Yees! Step 5 is to unbrick your device!
Sent from my XT890 using xda app-developers app
basko21 said:
Urgent problem, try After rooter i my motorola razr in 4.1.2 with bootloader deblocker, the screen gets stuck with a message "WARNING BOOTLOADER UNLOCKER" stops and restarts the sequence I try to Resolve the problem with Pilama 3.0 rom nothing is happen. I'm stuck help me pleas if somebody has a solution.
Click to expand...
Click to collapse
I have the same problem. However i just cant get in to fastboot mode so there's no way of flashing back any other firmware.
I am trying to go in to fastboot by holding volume up button and power button together but it just bootloops to the WARNING BOOTLOADER UNLOCKED screen over and over again.
I have also tried by holding volume down button and power button together but that just restarts the phone.
All help will be appriciated....
You pushing vol down, then push also power and wait, when green led disappear relase only power button you will get fastboot. You must relase power button as fast as green led disappear!!
Wysyłane z mojego XT890 za pomocą Tapatalk 2
skupi20 said:
You pushing vol down, then push also power and wait, when green led disappear relase only power button you will get fastboot. You must relase power button as fast as green led disappear!!
Wysyłane z mojego XT890 za pomocą Tapatalk 2
Click to expand...
Click to collapse
his thing not working for me ...
asadnow2k said:
his thing not working for me ...
Click to expand...
Click to collapse
for me was working, tahanks man !!
Guys.. since i unlocked the bootloader im no longer able to restart in fastboot mode. I hold the vol- and power but nothing happens. It just show the warning unlocked boot logo and start the phone. I need to restart in recovery mode and restore my phone from a bkp...
Sent from my XT890 using xda app-developers app
When it vibrates as before - quickly release the power button only
Sent from my XT890 using xda app-developers app
I wonder is the OP referring to the changed sequence after the Jelly Bean update?
I have a different 'fastboot not working' problem - many of us have bricked phones saying 'service required, code corrupt'. Everyone with this brick seems to be saying they cannot get the device in fastboot.
Had the same problem, all I had typo do was wait for the screen to flicker and then I let go of both buttons. That'll take you straight to fast boot mode
Sent from my XT890 using xda app-developers app
hi, i have a big problem.
I can enter in the boot selection menu with vol+ and vol- button but when i select ap fastboot, the razr turn off and if i connect to the pc, it doesn't be recognised and i can't reflash the rom.
Any solution? i read a lot of topics but no way to solve until now! :crying:
thanks,
gs
Guys, I have just received a new RazrI from CU web shope. It has already Android 4.1.2 pre-installed. I tried to unlock bootloeader for rooting but I can't go into Fastboot mode. I used Power+Volume down combination (pushed till vibration, pushed till restarting) but it din't go into the mode - just restarted. What is wrong? I had got RazrI before I killed it (Service Required....) I was able to go into the mode on the old one... I can't do it with the new one... it is crazy for me...
thanks in advance...
BeckMSTU said:
Guys, I have just received a new RazrI from CU web shope. It has already Android 4.1.2 pre-installed. I tried to unlock bootloeader for rooting but I can't go into Fastboot mode. I used Power+Volume down combination (pushed till vibration, pushed till restarting) but it din't go into the mode - just restarted. What is wrong? I had got RazrI before I killed it (Service Required....) I was able to go into the mode on the old one... I can't do it with the new one... it is crazy for me...
thanks in advance...
Click to expand...
Click to collapse
I had that problem haha just turn off the phone hold the volume down and hold the power till vibration and release power but not volume down it should boot up correctly for you
Sent from my RAZR I XT890 using XDA premium
Chri$b0b2005 said:
I had that problem haha just turn off the phone hold the volume down and hold the power till vibration and release power but not volume down it should boot up correctly for you
Sent from my RAZR I XT890 using XDA premium
Click to expand...
Click to collapse
Thank you Bro, I'm quite experianced user of RazrI (i have been using the previous one for 6 months befire i kilked him). I tried you way... the same result - just rebooting.... i'm afraid if Moto closed Unlocking option in new supply of RazrI... any new ideas?
BeckMSTU said:
Thank you Bro, I'm quite experianced user of RazrI (i have been using the previous one for 6 months befire i kilked him). I tried you way... the same result - just rebooting.... i'm afraid if Moto closed Unlocking option in new supply of RazrI... any new ideas?
Click to expand...
Click to collapse
Try it with adb...
ICuaI said:
Try it with adb...
Click to expand...
Click to collapse
This is exactly why I'm not a developer... I can't even think of something that simple, I might as well give up now :laugh:
Download adb. You don't need the whole Android SDK, seek for ADB only.
Select debugger mode on phone, click windows + r and then CMD (be administrator)
then went to ADB directory ex:
cd C:\Users\xxx\Desktop\ADB
ADB will start. Then :
adb reboot bootloader (for fastboot) or:
adb reboot recovery (for CWM once instaled or stock recovery).
Guys, thanks.... this is mirracle... I went into Fastboot... I just tried one more time Power+VolDown and I'm in... after two days of trying... Android is living by its own life...
HEllo everyone!!! and @skeevydude
I was trying to install roms with using RSD Lite tool, but i got a message that it is FAILED
So I tried to restart to phone by holding power and volume buttons BUTT NOTHING SHOWS UP ON MY SCREEN!!!
When the phone is connected to the pc and when i do the reset ( pwr+volume buttons) pc sounds the notification sound, i am understanding it somehow turns on but i dont have any display...
I have no idea what to do at this point... does anyone have any suggestionss??
please :crying::crying::crying::crying:
You can't flash custom roms with rsd man. You need an unlocked bootloader and to use a custom recovery to flash. You'll have to flash the stock firmware with rsd and start over.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
You can't flash custom roms with rsd man. You need an unlocked bootloader and to use a custom recovery to flash. You'll have to flash the stock firmware with rsd and start over.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
The problem is i cant see anything on the phone at all!!! I cant see the boot menu (the black screen menu) the bootloader was unlocked at the last time but i cant say anything about it right now...
I all know is the phone power on somehow.. by looking at the device manager i see QHSUSB_DLOAD port is connected and i can see the same thing in RSD Lite too..
So when i try using RSD it says "the phone failed to switch to fastboot mode"
Does anyone have any suggestions?
Once the bootloader is unlocked, it can't be re-locked which is good.
Were you trying to install a custom or stock rom using RSD? What rom were you running?
audit13 said:
Once the bootloader is unlocked, it can't be re-locked which is good.
Were you trying to install a custom or stock rom using RSD? What rom were you running?
Click to expand...
Click to collapse
Holly shh...!!!
I just found out that the ROM i was trying to install, I mistakenly tried to flash a custom ROM for Motorola Razr HD !!! not Atrix AD((( what the f.ck i did !!!!
I downloaded the wrong rom (
The only life sign I am getting is the USB sound and the QHSUSB_DLOAD port in the device manager.
does it help somehow?
Did you try the Myth Tools: http://forum.xda-developers.com/showthread.php?t=2262726
Not sure if it will help but it may be worth a try.
audit13 said:
Did you try the Myth Tools: http://forum.xda-developers.com/showthread.php?t=2262726
Not sure if it will help but it may be worth a try.
Click to expand...
Click to collapse
I did try
no luck.. :crying::crying:
legendnexus said:
Holly shh...!!!
I just found out that the ROM i was trying to install, I mistakenly tried to flash a custom ROM for Motorola Razr HD !!! not Atrix AD((( what the f.ck i did !!!!
I downloaded the wrong rom (
The only life sign I am getting is the USB sound and the QHSUSB_DLOAD port in the device manager.
does it help somehow?
Click to expand...
Click to collapse
You can flash RAZR hd roms to this phone. Just not through rsd as I said before.
Sent from my PACMAN MATRIX HD MAXX
@skeevydude Do the factory cables/ usb jig get our phones into download mode?
I have same problem
How could you resolve it? I have same problem but i was flashing official firmware but flashing filed and phone is in same condition nothing shows on display only when i connect it to computer searching for qhsusb_dload driver
lotkinsk1_legend said:
How could you resolve it? I have same problem but i was flashing official firmware but flashing filed and phone is in same condition nothing shows on display only when i connect it to computer searching for qhsusb_dload driver
Click to expand...
Click to collapse
try instead of using vol + - , power, just use vol - , power, then connect to the pc, and try something easy in the console like "fastboot reboot-fastboot" if it works then just flash normally with myth else i don't know
massterlee said:
try instead of using vol + - , power, just use vol - , power, then connect to the pc, and try something easy in the console like "fastboot reboot-fastboot" if it works then just flash normally with myth else i don't know
Click to expand...
Click to collapse
No reaction with volume - , power button only blink green point when connect to PC or use power, vol+ - buttons , RSD lite shows device connected but "switch to fastboot mode manually"
if someone could please help
I went through the same thing this weekend and probably bricked my phone 6 times and killed one SD card. What eventually worked for me was holding the power button down until the phone vibrates, then quickly holding the power button and both volume keys until the fast boot option came up. It took 45 tries before I got it. From there I was able to boot into my ClockworkMod recovery and flash my new ROM. ProBam Kit Kat. I hope this helps
Sent from my Atrix HD Maxx ProBAM using xda app-developers app
---------- Post added at 08:42 AM ---------- Previous post was at 08:37 AM ----------
Sorry, it took 4-5 tries
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
TheJeremyWhite said:
I went through the same thing this weekend and probably bricked my phone 6 times and killed one SD card. What eventually worked for me was holding the power button down until the phone vibrates, then quickly holding the power button and both volume keys until the fast boot option came up. It took 45 tries before I got it. From there I was able to boot into my ClockworkMod recovery and flash my new ROM. ProBam Kit Kat. I hope this helps
Sent from my Atrix HD Maxx ProBAM using xda app-developers app
---------- Post added at 08:42 AM ---------- Previous post was at 08:37 AM ----------
Sorry, it took 4-5 tries
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
Click to expand...
Click to collapse
I hold the power button down about 2 minutes but no reaction no vibrate need more time?
If it doesn't vibrate afer ~10 seconds release the button and try again. It can take several tries. As stated above, as soon as it vibrates let go and immediately press both volume buttons and the power button; this will get you into fastboot where you can choose to boot into recovery.
joarce said:
If it doesn't vibrate afer ~10 seconds release the button and try again. It can take several tries. As stated above, as soon as it vibrates let go and immediately press both volume buttons and the power button; this will get you into fastboot where you can choose to boot into recovery.
Click to expand...
Click to collapse
no reaction no vibrate only blink when connect to PC and rsd light shows that phone is connected but not flashing failed please switch to fastboot mode now i order factory fastboot cable what do you think may it help in this situation?
What your battery level at the last time you saw it? My difficulties were partly caused by low batt (I believe it doesn't charge in fastboot or recovery) I've had to pull batteries and manually wire them to a charger before.
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
TheJeremyWhite said:
What your battery level at the last time you saw it? My difficulties were partly caused by low batt (I believe it doesn't charge in fastboot or recovery) I've had to pull batteries and manually wire them to a charger before.
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
Click to expand...
Click to collapse
It was about 53% and it was in fastboot mod so it wasn't charging I try to flash it to start phone in normal mode to charge but when it was flashing in 1/23 files it failed and because battery low and then it is like now no reaction only when connect to PC blink green on phone and connected :X
A factory fastboot cable would probably help you in this situation. You can look on youtube on how to make one or you can buy one for about 5 bucks on eBay. It will both power your phone and force fastboot mode when plugged into the computer
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
TheJeremyWhite said:
A factory fastboot cable would probably help you in this situation. You can look on youtube on how to make one or you can buy one for about 5 bucks on eBay. It will both charge your battery when plugged into the computer and force fastboot mode
Sent from my Atrix HD MAXX ProBAM using xda app-developers app
Click to expand...
Click to collapse
Thanks I have ordered it from eBay I hope it will help to me .
thanks
Hi guys! After a failed firmware, my mb886 is bricked. If press the button(Vol+ Vol- Pwr), nothing happens. And RSD doest detect phone.
Fastboot just doest work.
When connected to the pc green LED lights and it shows up as USB Input Device and HID-compliant in device manager. Hardware ID is (USB\VID_05C6&PID_F006&REV_0000).
Under Linux, defined as Qualcomm inc.
Now it's for parts or have a way to recover? Maybe someone has a JTAG pinout for mb886?
And sorry for my english))
Is your bootloader unlocked? What firmware were you originally on and which did you try to flash? Did you try manually or with Myth Tools?
Plug it into your PC so you can see the green light. Hold all 3 buttons until it turns off. Then let go of all of them, then hold the Vol Down and power buttons, and when you see the boot logo (Moto logo) on the screen let go of the power button and continue holding Vol Down until you get a black screen with white text. At this point, you can try flashing a new firmware with Myth Tools. Don't flash a custom ROM, only official firmwares.
If you don't have Moto fastboot you can search around for it.
Sent from my ATRIX HD using Tapatalk
penser said:
Is your bootloader unlocked? What firmware were you originally on and which did you try to flash? Did you try manually or with Myth Tools?
Plug it into your PC so you can see the green light. Hold all 3 buttons until it turns off. Then let go of all of them, then hold the Vol Down and power buttons, and when you see the boot logo (Moto logo) on the screen let go of the power button and continue holding Vol Down until you get a black screen with white text. At this point, you can try flashing a new firmware with Myth Tools. Don't flash a custom ROM, only official firmwares.
If you don't have Moto fastboot you can search around for it.
Sent from my ATRIX HD using Tapatalk
Click to expand...
Click to collapse
I have a link to a thread with the Moto Fastboots (all OS's) in the very last post of my fastboot guide. Gonna eventually upload it to Copy and update my OP with it, but for now the link to the thread with it and some other good Moto information is good enough.
penser said:
Is your bootloader unlocked? What firmware were you originally on and which did you try to flash? Did you try manually or with Myth Tools?
Plug it into your PC so you can see the green light. Hold all 3 buttons until it turns off. Then let go of all of them, then hold the Vol Down and power buttons, and when you see the boot logo (Moto logo) on the screen let go of the power button and continue holding Vol Down until you get a black screen with white text. At this point, you can try flashing a new firmware with Myth Tools. Don't flash a custom ROM, only official firmwares.
If you don't have Moto fastboot you can search around for it.
Sent from my ATRIX HD using Tapatalk
Click to expand...
Click to collapse
@penser
I do not know whether the unlocked bootloader. This phone got to me in this condition ((
The problem is that the phone does not respond to hold buttons.
Apparently fastboot was erased and I need to restore it. Then I'll be able to flash the stock firmware in the RDS
penser said:
Is your bootloader unlocked? What firmware were you originally on and which did you try to flash? Did you try manually or with Myth Tools?
Plug it into your PC so you can see the green light. Hold all 3 buttons until it turns off. Then let go of all of them, then hold the Vol Down and power buttons, and when you see the boot logo (Moto logo) on the screen let go of the power button and continue holding Vol Down until you get a black screen with white text. At this point, you can try flashing a new firmware with Myth Tools. Don't flash a custom ROM, only official firmwares.
If you don't have Moto fastboot you can search around for it.
Sent from my ATRIX HD using Tapatalk
Click to expand...
Click to collapse
Thanks for that reply. Saved me. However I was unable to get myth tools to complete anything.
Finally I found the rsd lite . Then it failed each time. But I figured out there was a problem in flashing the modem.
I fastboot the modem separately , then ran rsd with the stock firmware found in one of these threads and finally got my phone back.
Now, I'm rooted, boot loader unlocked, and have philz recovery on it.
Somehow I'd lost recovery of any kind. And every flash failed, with an error of no block (and I forget the three letter name it had on error).
This is my first Motorola that I've messed with. I've had galaxy's for the most part.
I tried the pa moto ROM. But had no WiFi so I didn't go much further with it. Restored the backup I made with philz.
Going to try some different ROMs tonight.
On flashing back to stock, just keep trying as it seems very touchy.
Also be sure to delete the lines in the XML file in firmware. Everything went a lot more smooth after that!
Thanks!
Sent from my MB886 using xda app-developers app
no me pasa
tengo un problema similar pero cuando lo conecto no me da la luz verde
tork0112 said:
ran rsd with the stock firmware found in one of these threads
Click to expand...
Click to collapse
Can you post where you found the stock firmware please?
dta5003 said:
Can you post where you found the stock firmware please?
Click to expand...
Click to collapse
http://sbf.droid-developers.org
If you know anyone with riff jtag.
you can jtaq device back too life.
bricked my mb886
i have a unlocked boot loader trying update my phone i stock in fastboot loader rsdlit didnit sove that problem. no i m stock in fastboot scren soo is there any way out .... i tryed rsd lit but it doesnot recognize my phone as mb886 .
sabinlald said:
i have a unlocked boot loader trying update my phone i stock in fastboot loader rsdlit didnit sove that problem. no i m stock in fastboot scren soo is there any way out .... i tryed rsd lit but it doesnot recognize my phone as mb886 .
Click to expand...
Click to collapse
What are you trying to update from/to?
Sent from my MB886 using xda app-developers app
[QUOTE="sabinlald, post: 54528404, member: 5835990"]i have a unlocked boot loader trying update my phone i stoc
i tryed to update to kitkai but ............nth worked
help please....
hello some one can help me i got this atrix hd mb886 bricked , i was try to flash with rsd but it send me back an error . failed flashing process 2/25 flash partition gpt main0.bin need help