[Q] Fastboot mode... HELP! - RAZR i Q&A, Help & Troubleshooting

Guys, I have just received a new RazrI from CU web shope. It has already Android 4.1.2 pre-installed. I tried to unlock bootloeader for rooting but I can't go into Fastboot mode. I used Power+Volume down combination (pushed till vibration, pushed till restarting) but it din't go into the mode - just restarted. What is wrong? I had got RazrI before I killed it (Service Required....) I was able to go into the mode on the old one... I can't do it with the new one... it is crazy for me...
thanks in advance...

BeckMSTU said:
Guys, I have just received a new RazrI from CU web shope. It has already Android 4.1.2 pre-installed. I tried to unlock bootloeader for rooting but I can't go into Fastboot mode. I used Power+Volume down combination (pushed till vibration, pushed till restarting) but it din't go into the mode - just restarted. What is wrong? I had got RazrI before I killed it (Service Required....) I was able to go into the mode on the old one... I can't do it with the new one... it is crazy for me...
thanks in advance...
Click to expand...
Click to collapse
I had that problem haha just turn off the phone hold the volume down and hold the power till vibration and release power but not volume down it should boot up correctly for you
Sent from my RAZR I XT890 using XDA premium

Chri$b0b2005 said:
I had that problem haha just turn off the phone hold the volume down and hold the power till vibration and release power but not volume down it should boot up correctly for you
Sent from my RAZR I XT890 using XDA premium
Click to expand...
Click to collapse
Thank you Bro, I'm quite experianced user of RazrI (i have been using the previous one for 6 months befire i kilked him). I tried you way... the same result - just rebooting.... i'm afraid if Moto closed Unlocking option in new supply of RazrI... any new ideas?

BeckMSTU said:
Thank you Bro, I'm quite experianced user of RazrI (i have been using the previous one for 6 months befire i kilked him). I tried you way... the same result - just rebooting.... i'm afraid if Moto closed Unlocking option in new supply of RazrI... any new ideas?
Click to expand...
Click to collapse
Try it with adb...

ICuaI said:
Try it with adb...
Click to expand...
Click to collapse
This is exactly why I'm not a developer... I can't even think of something that simple, I might as well give up now :laugh:

Download adb. You don't need the whole Android SDK, seek for ADB only.
Select debugger mode on phone, click windows + r and then CMD (be administrator)
then went to ADB directory ex:
cd C:\Users\xxx\Desktop\ADB
ADB will start. Then :
adb reboot bootloader (for fastboot) or:
adb reboot recovery (for CWM once instaled or stock recovery).

Guys, thanks.... this is mirracle... I went into Fastboot... I just tried one more time Power+VolDown and I'm in... after two days of trying... Android is living by its own life...

Related

flashed clockwork recovery for Optimus 2x on the Optimus black

I`ve flashed the clockwork mode for the Optimus 2x on the Optimus Black and now the phone is stucked on the LG logo and nothing works (like hard reset - I`ve tried vol down button + power; and vol down button + home + power and nothing happens) any ideas what should I do?
Reflash stock rom when its available.
You really are stupid
Sent from my LG-P990 using XDA App
xmoo said:
You really are stupid
Click to expand...
Click to collapse
This, unfortunately.
You are completely boned until someone finds and hosts a complete stock ROM. In fact, you're probably best off just taking it back and playing dumb.
i`ll try getting it back to provider and complain but if that doesn`t work, how to flash a stock rom (when available) if i can`t enter recovery mode and phone isn`t starting up ...
Smartflash will hopefully be available on the phone (turn it off, pull the battery, hold vol down and plug in the USB cable, if you're lucky it'll say something about software update on the screen)
Rusty! said:
Smartflash will hopefully be available on the phone (turn it off, pull the battery, hold vol down and plug in the USB cable, if you're lucky it'll say something about software update on the screen)
Click to expand...
Click to collapse
I`m not that lucky...i did what you`ve suggested but only the LG Logo appears. thanks for you`r quick response
Same here! Help needed!
I've flashed many ROMs, but today decided to use ROM Manager, it update ClockWorkMod Recovery, but then when I try to go in recovery, only stuck at LG logo!!!
Now, can't get into recovery or boot loader... phone looks bricked!?
Did you find a solution to this problem or returned the phone for servicing???
ccounotte said:
I've flashed many ROMs, but today decided to use ROM Manager, it update ClockWorkMod Recovery, but then when I try to go in recovery, only stuck at LG logo!!!
Now, can't get into recovery or boot loader... phone looks bricked!?
Did you find a solution to this problem or returned the phone for servicing???
Click to expand...
Click to collapse
I`ve returned the phone for servicing...I`m still waiting to get it back. I`m guessing they`ll send me another device...
spyb0y said:
I`ve returned the phone for servicing...I`m still waiting to get it back. I`m guessing they`ll send me another device...
Click to expand...
Click to collapse
Well sorry for you... but in case, I found this link here that explains how to recover using NVflash, if this still works.
You have to press vol up+down while plugging into the USB, then you get dark screen on the phone and a new hardware on Windows! That worked great!
Hope it helps anyone in this bad situation!
ccounotte said:
Well sorry for you... but in case, I found this link here that explains how to recover using NVflash, if this still works.
You have to press vol up+down while plugging into the USB, then you get dark screen on the phone and a new hardware on Windows! That worked great!
Hope it helps anyone in this bad situation!
Click to expand...
Click to collapse
thank you!
anyway...I just find out that i`ll get my phone on wednesday.
Will there be any development on this phone otherwise i wont be buying it
http://forum.xda-developers.com/showthread.php?t=1098083
I'm afraid you need to reflash it using smartflash for p970, you need the .bin file to do that. Someone made it available for p990 so if your lucky someone must have uploaded also for p970.

[Q] I think I bricked my phone :( :( - PLEASE help!

Hi,
I tried the regular fastboot method to load CWM recovery.
Whenever it got to the point of loading the recovering, it would just say "flashing recovery on the device...".
Then, when restarting bootloader and clicking on "recovery", it would just shut down the phone.
I decided to experiment to try fix the issue, and I came across this post:
http://forum.xda-developers.com/showthread.php?t=1928551
I downloaded the ZIP file and I ran the root.bat
It flashed some boot images and now my phone wont start
It is stuck on the "warning bootloader unlocked screen" and will not go any further.
Please help . I'm so scared that I've bricked my phone. Is there ANYTHING I can do?
Thanks in advance for the help!
The methods u used can't brick your phone
Reboot in boot loader by pressing the power button and volume - button at the same time. Just at the moment the phone shuts-down/reboot release the power button. It will boot in boot loader. After this flash cwm or twrp again and with the volume down button go to recovery. Select recovery with the volume up key and u are done. Cwm/twrp is flashed and will boot in the recovery.
In recovery I would install the ROM from Omar. It will restore your system and boot.IMG so it will work. Don't forget to wipe data.
If this doesn't work flash the home made fast boot files somewhere in the development section
Sent from my XT890 using xda app-developers app
Hazou said:
The methods u used can't brick your phone
Reboot in boot loader by pressing the power button and volume - button at the same time. Just at the moment the phone shuts-down/reboot release the power button. It will boot in boot loader.
Click to expand...
Click to collapse
Thanks - I tried that. I do let go of the buttons as soon as it starts to reboot itself, but it doesn't start the bootloader - it still just shows the screen "warning bootloader unlocked". I can not get back into the bootloader
Do u reset the phone with the 4 buttons and just when it resets does your phone reboots immediately?
Sent from my GT-P5110 using XDA Premium HD app
Hazou said:
Do u reset the phone with the 4 buttons and just when it resets does your phone reboots immediately?
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
If I hold all 4 buttons, the screen goes blank, and the green light stays on. My PC then finds hardware called "MEDFIELD" but wont find drivers for it.
Does this help at all?
alkit said:
If I hold all 4 buttons, the screen goes blank, and the green light stays on. My PC then finds hardware called "MEDFIELD" but wont find drivers for it.
Does this help at all?
Click to expand...
Click to collapse
The above applies when connected with usb.
If I press all 4 buttons without USB connected, it just reboots and gets stuck on the "unlocked bootloader" message again
alkit said:
Then, when restarting bootloader and clicking on "recovery", it would just shut down the phone.
Click to expand...
Click to collapse
Just of curiosity - which button you used to select recovery - power button or vol.up button?
alkit said:
I do let go of the buttons as soon as it starts to reboot itself, but it doesn't start the bootloader
Click to expand...
Click to collapse
You should let go only of power button and hold vol.down button (at least for me)
If your PC finds hardware - can you do fastboot devices to check whether it is actually recognized properly?
And last thing - which method you used to load recovery (and were you on ICS\JB)? You were rooted and used automated methods or you unlocked bootloader and wanted to root afterwards (manually through fastboot)?
Divina Angelus said:
Just of curiosity - which button you used to select recovery - power button or vol.up button?
You should let go only of power button and hold vol.down button (at least for me)
If your PC finds hardware - can you do fastboot devices to check whether it is actually recognized properly?
And last thing - which method you used to load recovery (and were you on ICS\JB)? You were rooted and used automated methods or you unlocked bootloader and wanted to root afterwards (manually through fastboot)?
Click to expand...
Click to collapse
You are a GENIUS!!! A LIFE SAVER!!! I can't begin to tell you how grateful I am. BOTH of your points fixed the phone.
I could never get into recovery becuase I was pressing the power button. I could never get into fastboot becuase I was holding both the power and volume down button.
So, for anyone using a RAZR I... please note the following SIMPLE things:
1) In the bootloader menu, the power button does NOT select the option. The VOL UP button selects the option
2) To boot into BOOTLOADER : Hold both power and vol down buttons until the phone restarts, and then RELEASE the power button, while still HOLDING the volume down button! It will then load the bootloader.
Again, THANKS so so much for reviving my phone for me. I was going crazy without a phone!
alkit said:
You are a GENIUS!!! A LIFE SAVER!!! I can't begin to tell you how grateful I am. BOTH of your points fixed the phone.
I could never get into recovery becuase I was pressing the power button. I could never get into fastboot becuase I was holding both the power and volume down button.
So, for anyone using a RAZR I... please note the following SIMPLE things:
1) In the fastboot menu, the power button does NOT select the option. The VOL UP button selects the option
2) To boot into BOOTLOADER : Hold both power and vol down buttons until the phone restarts, and then RELEASE the power button, while still holding the volume down button! It will then load the bootloader.
Again, THANKS so so much for reviving my phone for me. I was going crazy without a phone!
Click to expand...
Click to collapse
I was going through everything you've faced yesterday. So yeah, glad I was of help to someone else as well)
This has never happened to me before but don't stress one bit because nothing ever permanently bad comes from this. You can forget about it being destroyed. These aren't iPhones, haha. You can get it going again pretty easy I hear. Just don't stress because there is no point and you WILL get help. Just listen to what these experienced dudes are saying and you should be back on track. Good luck!
- - - - - - - - - -
UPDATE: Nice! Glad to see you got the help you needed and everything's back on track!
Nice that it is solved. I gave u the solution on my first post, but nice that someone els did a better job in explaining it
There is almost no possibilities to brick your device if u only flash things like the boot, system, recovery or data partition. They can he solved very easy. If u flash the other partitions like the radio u can get a problem.
Sent from my XT890 using xda app-developers app
Hazou said:
Nice that it is solved. I gave u the solution on my first post, but nice that someone els did a better job in explaining it
There is almost no possibilities to brick your device if u only flash things like the boot, system, recovery or data partition. They can he solved very easy. If u flash the other partitions like the radio u can get a problem.
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
You are 100% right. I just re-read your post, and noticed that you did mention those 2 points. I must've just read over them really quickly and didn't pay attention to the details of which buttons to press. :angel:
Thanks a ton for your help! Really appreciate it! :highfive:

[Q] One's touch screen disabled

RESOLVED
Silver HTC One for AT&T; bootloader unlocked, rooted, s-on
I tried to flash a 4.1.2 ROM on the phone earlier today through CWM. No errors were given during the process. After the phone restarted the touch screen is now disabled. All three hardware keys seem to be working fine (power, v-up, v-down). Since the touchscreen is not working I cannot get past the initial lock screen. If I try and restart the phone by holding power it takes a long time >5 minutes of holding down power, "To restart your phone continue to press and hold power for 3, 2, 1, comes up and then stays at 1 for a long time.
If I connect the phone to my mac android file transfer opens up and I can see the files on the phone. However, if I try to find the device using 'adb devices' the list of attached devices is empty.
I would like to put a different ROM on and then flash that but because I am unable to do a power down (only restart after a long time) or use adb to re-boot into fastboot or recovery I am stuck.
Anything you guys could give me to point me in the right direction would be greatly appreciated.
also I installed HTC sync manager and it launches after the device is attached, but does not indicate that my device is attached.
Thanks!
You need a 4.3 based ROM. Push via ADB and install via cwm or adb sideload
sent from my mobile device
SaHiLzZ said:
You need a 4.3 based ROM. Push via ADB and install via cwm or adb sideload
sent from my mobile device
Click to expand...
Click to collapse
But wouldnt I need adb to recognize my device? At the moment I cannot even get it to show up in devices when it is connected.
slapshot123 said:
But wouldnt I need adb to recognize my device? At the moment I cannot even get it to show up in devices when it is connected.
Click to expand...
Click to collapse
Just copy the 4.3 rom via the file manager, then restart with however long it takes. While restarting, keep the vol-down button pressed. You'll reboot to bootloader. From there, go to recovery and select your 4.3 rom.
Sent from my iPod touch using Tapatalk
slapshot123 said:
But wouldnt I need adb to recognize my device? At the moment I cannot even get it to show up in devices when it is connected.
Click to expand...
Click to collapse
Put ur phone on Recovery then try to adb push or Sideload....
OTG cable is also an option!
sent from my mobile device
somesli they
SaHiLzZ said:
OTG cable is also an option!
sent from my mobile device
Click to expand...
Click to collapse
Can you elaborate on the OTG cable? It may be my best option at the moment because I cannot get the phone to reboot at all let alone into recovery. I tried to restart while holding down power and vol-down (like n1234d said) for about 20 minutes and the phone did not restart.
You could use an OTG cable and a USB drive to get the ROM onto the phone inside recovery. Unfortunately, you still need to reboot to recovery. If the phone can't reboot, I'm not sure what to do.
slapshot123 said:
Can you elaborate on the OTG cable? It may be my best option at the moment because I cannot get the phone to reboot at all let alone into recovery. I tried to restart while holding down power and vol-down (like n1234d said) for about 20 minutes and the phone did not restart.
Click to expand...
Click to collapse
Just hold the power button and power it off....
then try to get in recovery from bootloader....
the phone wont get recognized via adb if not in recovery mode cause the USB debugging would be turned off....
the phone WILL power off if you keep the power button pressed for 20-30 seconds and should reboot.
SaHiLzZ said:
the phone WILL power off if you keep the power button pressed for 20-30 seconds and should reboot.
Click to expand...
Click to collapse
Thanks, but for whatever reason it took holding down the power button for 40 minutes.
fenstre said:
You could use an OTG cable and a USB drive to get the ROM onto the phone inside recovery. Unfortunately, you still need to reboot to recovery. If the phone can't reboot, I'm not sure what to do.
Click to expand...
Click to collapse
Thanks for you suggestions, as I mentioned above I got the phone to reboot into recovery after holding down power for an insanely long time. From there I was able to use adb to get everything sorted out.
So my problem is resolved, how do I close/delete this thread? Thanks for all your suggestions.
slapshot123 said:
Thanks, but for whatever reason it took holding down the power button for 40 minutes.
Thanks for you suggestions, as I mentioned above I got the phone to reboot into recovery after holding down power for an insanely long time. From there I was able to use adb to get everything sorted out.
So my problem is resolved, how do I close/delete this thread? Thanks for all your suggestions.
Click to expand...
Click to collapse
Haha 40 minutes, yeah right.
Sent from my HTC One using Tapatalk
xcrazydx said:
Haha 40 minutes, yeah right.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Cool, nice productive comment. I can assure you it was, watched two episodes of workaholics waiting for the damn thing.
slapshot123 said:
Cool, nice productive comment. I can assure you it was, watched two episodes of workaholics waiting for the damn thing.
Click to expand...
Click to collapse
I'm pretty sure you unknowingly kept leaving the power/volume buttons because of which the phone finally rebooted when you got it right
Sent from my HTC One using Tapatalk
n1234d said:
I'm pretty sure you unknowingly kept leaving the power/volume buttons because of which the phone finally rebooted when you got it right
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Is this really necessary?
slapshot123 said:
Thanks, but for whatever reason it took holding down the power button for 40 minutes.
Thanks for you suggestions, as I mentioned above I got the phone to reboot into recovery after holding down power for an insanely long time. From there I was able to use adb to get everything sorted out.
So my problem is resolved, how do I close/delete this thread? Thanks for all your suggestions.
Click to expand...
Click to collapse
Sorry to hear it took a while, thats odd. But you are all done now. Edit your first post and change the subject to [SOLVED] .. thats all

Broken recovery / endless bootloop!

Hello there,
a few days ago i got a lot of problems with my wifi connections, and in a german forum they told me to check if a custom rom could work for me. So i installed the "Minimal ADB and Fastboot" tools to install the cwm and so on. After i flashed the recovery.img, my tablet restarted and now i am stucked in a boot loop.
The big problem is, I am not able to reach the menu for RCK and so on again with VOL- and Power Button. Just restarting and restarting and restarting... i can not connect via adb or fastboot. The only thing i can do is VOL+ and Power, Windows 8 then gives a signal of a connection, but i don't know what to do with this - cause I only have a black screen!
I hope, somebody is able to help me, to solve this issue.
Thanks and Regards
(sry for my bad english)
What version of stock Rom was it on the tablet when you flashed cwm and which version cwm did you flash
We recommended the latest Asus firmware and the latest working recovery is 6.0.4.7
Sent from my Note II using XDA Premium 4 mobile app
---------- Post added at 02:56 PM ---------- Previous post was at 02:52 PM ----------
I also had a bootloop before, I think I hold both volume and power to power down. Then wait 5 minutes then vol - and power to get into fastboot
Sent from my Note II using XDA Premium 4 mobile app
Hey! My version was the official 4.3 Update WW_10_26_1_18.
I wanted to install the Asus Stock Modded Deodexd Rom (10.26.1.18 JB 4.3) for root.
After I used this tutorial droidbasement.com/db-blog/?p=3223 for installing cwm, my device started to begin his loop. I am not able to Use Vol- / power! I also waited for several minutes
What happens if you just keep holding vol- and power without releasing
Sent from my Note II using XDA Premium 4 mobile app
All you have to do is power and vol +/- then flash back the stock recovery via fastboot.
Then wipe. Then boot in as normal (you will have to re-set up). If wipe does not restore you, grab 10.26.1.18 for your SKU from asus , rename the .zip inside to T4_SDUPATE, place on an microsd, pop it in, enter boot loader and enter RCK. Then it will flash it.
You should fastboot boot to ensure you are ok before permanent flashing, when putting a new recovery on.
Your bootloader must be on 10.26.1.18 to use anything on DB.
The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!
Zkaface said:
The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!
Click to expand...
Click to collapse
You have to be fast. When.the screen goes black hold vol +/- (hold them both) and it will enter fastboot when it cycles since I doubt u can fully power off in that state. Leave USB plugged in.
also, reply back with how exactly you flashed recovery (the command). did you do a fastboot flash recovery recovery.img or a fastboot flash boot recovery.img?
pershoot said:
also, reply back with how exactly you flashed recovery (the command). did you do a fastboot flash recovery recovery.img or a fastboot flash boot recovery.img?
Click to expand...
Click to collapse
that's a good question. I mean, i did exactly what is written in that post from droidbasement.
Then you should have no issue as long as you are on the appropriate boot loader. Hundreds if not thousands of users are using it at this point.
Power and hitting both vol + and - at same time should get it back in to fastboot. Please make sure you time it right.
Good luck.
Zkaface said:
The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!
Click to expand...
Click to collapse
Hey Zkaface,
Did you manage to solve your problem or you still have a bootloop with asus logo? I have the similar problem, no fastboot available yet. Also, no any buttons combination. as -&+ & power. helping..
Pls reply if you have any idea / related news how to fix it.
Hello!
I have the same problem. After installing recovery.
When the screen is off transformer is in APX mode.
But as I understand for Tegra 4 still does not work. (((
Dggo said:
Hello!
I have the same problem. After installing recovery.
When the screen is off transformer is in APX mode.
But as I understand for Tegra 4 still does not work. (((
Click to expand...
Click to collapse
Correct. There is no wheelie/nvflash/bricksafe for this tablet.
You need to provide more information how you got into this situation.
Can you boot into fastboot?
berndblb said:
Can you boot into fastboot?
Click to expand...
Click to collapse
No, tried everything (vol-&power...).
berndblb said:
You need to provide more information how you got into this situation.
Click to expand...
Click to collapse
Did unlock, flashed recovery (accordance with the instructions 4pda.ru)
After reboot got android belly up.
And after the second reboot got endless bootloop(((
Exit from it turns out only by pressing vol+
I apologize for Google translator
Asus help is needed
Hello ASUS !!!
You have to HELP us, in order to keep your consumer with you. Other vice people will start to think that your ASUS brand is not a trustful brand anymore. Using such tricks as providing consumer with possibility to open a "Pandora's box" with bootloader unlock, and after you pushing consumer to pay about 300 $ for "motherboard replacing".
Following such kind of policy you will collect some money but definitely you will loose much more.
Sincerely,
Stream1313
PS: I was started to use the "unlock" etc not because I do not have other business t do but because of the serious problem in your DEFAULT STOCK software.
To: Moderator - please do not delete this post, hopefully some ASUS people will read it.
I have the same problem after trying to install OTA from SDcard and then erasing data from power+(vol-)-menu. It's looping all the time and I've tried everything. Only APX works if I use naked drivers (transformer APX-drivers).
krosettli said:
I have the same problem after trying to install OTA from SDcard and then erasing data from power+(vol-)-menu. It's looping all the time and I've tried everything. Only APX works if I use naked drivers (transformer APX-drivers).
Click to expand...
Click to collapse
You cannot get into fastboot?
How about ADB while it is looping?
You will have to provide more info: What do you have installed?
Bootloader version
ROM
Recovery
What exactly did you do?
APX is useless at this point as there is no way use nvflash on the Tegra4 yet.
berndblb said:
You cannot get into fastboot?
How about ADB while it is looping?
You will have to provide more info: What do you have installed?
Bootloader version
ROM
Recovery
What exactly did you do?
APX is useless at this point as there is no way use nvflash on the Tegra4 yet.
Click to expand...
Click to collapse
no, no chance to get into fastboot or using adb. the only thing that works is APX after pressing volume+ for about 10sec.
what did I do: I tried to install clockworkmod recovery and flashed recovery.img from fastboot. Then I restarted my device. I was sure I did every OTA-update because I checked almost every day for new updates. BUT starting up the tablet I saw my bootloader wasn't 10.26.1.18 (required for CWM). So I went to ASUS-website and downloaded WW_epaduser_10_26_1_18_UpdateLauncher and tried to update. But this did not work. So I rebooted pressing power and volume- ... then wiped data or whatever the third option was ... after that my looping started.
I've copied T4_SDUPDATE to my microSD and tried almost everything... charging, apx and looping is the only things that work at this moment
Sorry mate, but you hardbricked your tablet.
You installed a recovery that is incompatible with your bootloader, which is not good but fixable.
Then you used 'Wipe Data' from the bootloader which is pretty much a recipe for disaster with an incompatible recovery installed.
With no fastboot or adb access there is no way to get it back.
[emoji24]
so nothing I could do over APX, microSD and the 3 buttons? no chance, even in future?

I need help with my Xperia TL (SOLVED)

so the other day i decided to root my phone it went all well i also installed CWM it also worked. so i also decided to install a custom rom i cant remember the rom since it was download to my phones memory. either way i delete everything cache dalvek etc.. after it installed through recovery menu it said it needed a reboot so i did, but when i rebooted it came to the sony logo. since then its been stuck in the sony logo until it runs out of battery i can't access anything it wont go pass that not even the recovery menu. i don't know what to do. ALSO MY COMPUTER WILL NOT DETECT WHEN I PLUG MY PHONE IN SO I CAN'T USE PCC, Flash tool or seus... any help?
killmehere said:
so the other day i decided to root my phone it went all well i also installed CWM it also worked. so i also decided to install a custom rom i cant remember the rom since it was download to my phones memory. either way i delete everything cache dalvek etc.. after it installed through recovery menu it said it needed a reboot so i did, but when i rebooted it came to the sony logo. since then its been stuck in the sony logo until it runs out of battery i can't access anything it wont go pass that not even the recovery menu. i don't know what to do. ALSO MY COMPUTER WILL NOT DETECT WHEN I PLUG MY PHONE IN SO I CAN'T USE PCC, Flash tool or seus... any help?
Click to expand...
Click to collapse
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Have you tried flash mode
Sent from my One X using XDA Premium 4 mobile app
it doesnt connect to the pc i cant do anything.
FaiselW said:
Have you tried flash mode
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i let it charge for a little and tried the volume up plus power buttom it vibrated but boot it back to sony screen.
Alex5699 said:
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Click to expand...
Click to collapse
killmehere said:
it doesnt vibrate when it turns on. also tried what you said but didnt work. THIS CASE IS RARE AND MAYBE CAN HAVE A SOLUTION. JUST NEED TO DIG IN.
Click to expand...
Click to collapse
I think what should be focused on first is getting juice back in that battery. Plug it in to the charger and let it sit for a few hours (like, at least 8 hours). It may boot loop but maybe it will still get some juice? (not sure about this..). Then you can try again to get into Flashmode. (Are you experienced in flashing stock FTF's with flashtool?)
no... i let it charge for a little and tried the volume up plus power buttom it vibrated but boot it back to sony screen.
LaZiODROID said:
I think what should be focused on first is getting juice back in that battery. Plug it in to the charger and let it sit for a few hours (like, at least 8 hours). It may boot loop but maybe it will still get some juice? (not sure about this..). Then you can try again to get into Flashmode. (Are you experienced in flashing stock FTF's with flashtool?)
Click to expand...
Click to collapse
By turning it on with VolUp+Power, what were you expecting to happen?
i am not sure. when i tried connecting it. it connects for 5 secs then disconnects.
LaZiODROID said:
By turning it on with VolUp+Power, what were you expecting to happen?
Click to expand...
Click to collapse
Alex5699 said:
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Click to expand...
Click to collapse
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
killmehere said:
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
Click to expand...
Click to collapse
Go to the original post in this thread and click the Edit Post button. Then near the Save button should be a "Go Advanced" button. You can edit the thread title in there. Glad to hear it worked out for you.
killmehere said:
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
Click to expand...
Click to collapse
sure, the very first post u made with your initial question, When you press edit, press on "go advanced and then u can change it up from there :good:

Categories

Resources