Related
Hello,
Im writing here because im a newbie here and i dont have enough posts to be able to post in the actual thread under development lol.
My phone is rooted and bootloader unlocked..
I was on stock Att 4.1.1
So far i tried bootanimations and bootlogos and they are good. The problem is flashing custom rooms from here.
The only ones that worked for me are Liquid JB v2.9 and cm 10.2 from epinter..... im trying with PACrom and both of HoloBlur but no luck with them .... the pacrom stays in the infinite loop of the bootanimation.. the HoloBlur at first was looping in the bootanimation but then i did format sd via CWM and now it goes back and forward from bootanimation to "preparing desktop" and something about ASOP keyboard appears, so it keep doing that loop infinitely. I dont know what else to do.... Im flashing them via CWM
thx
try unmounting the cache in cwm before flash
frog1982 said:
try unmounting the cache in cwm before flash
Click to expand...
Click to collapse
I think is already unmounted because the only option says "mount cache"
Are you formatting the system under the mounts and storage option? You could also try formatting data and cache under that option too.
Another possible solution may be to install a stock rom (see Skeevy's thread on stock roms) before installing a custom rom.
audit13 said:
Are you formatting the system under the mounts and storage option? You could also try formatting data and cache under that option too.
Another possible solution may be to install a stock rom (see Skeevy's thread on stock roms) before installing a custom rom.
Click to expand...
Click to collapse
Yes im formating almost everything i see under mounts and storage .
Trying to install stock roms is the same problem.
Im charging to full the battery to see if that one of the problems cause was less the 50%
Another thing is im not 100% sure how to install stock roms lol
Using just Rsd Lite and thats it ?
Trying Myth Tool maybe?
Or by using CWM like i tried with the Skeevys Mexico retail?
I pretty sure the answer is right here but everything i read is involving fastboot and adb
TheTechnician said:
Yes im formating almost everything i see under mounts and storage .
Trying to install stock roms is the same problem.
Im charging to full the battery to see if that one of the problems cause was less the 50%
Click to expand...
Click to collapse
Are you using rsd or cwm to flash a stock rom? I have had no problem with flashing a Mexican Retail or Bell stock rom from Skeevy's stock rom page via CWM.You could try flashing via rsd or Myth Tools. Do you have a backup of your original rom?
audit13 said:
Are you using rsd or cwm to flash a stock rom? I have had no problem with flashing a Mexican Retail or Bell stock rom from Skeevy's stock rom page via CWM.You could try flashing via rsd or Myth Tools. Do you have a backup of your original rom?
Click to expand...
Click to collapse
Im only using cwm for stock roms, i tried to use rsd to flash mexican retail but it doesnt want to decompress.
the backup i had somehow got corrupted, something about md5 checksum
Also im having a HARD time trying to boot in recovery or in fastboot menu..
TheTechnician said:
Im only using cwm for stock roms, i tried to use rsd to flash mexican retail but it doesnt want to decompress.
the backup i had somehow got corrupted, something about md5 checksum
Click to expand...
Click to collapse
You could skip the checksum verification and just restore.
audit13 said:
You could skip the checksum verification and just restore.
Click to expand...
Click to collapse
I managed to flash the stock stock untouched Mexico rom using RSD Lite modifying the xml.
I will try later some other roms to see which one will work now lol
Thx for the replies ill be bothering later.
I've tried in twrp and cwm/cwm touch - I get a boot loop no matter which rom I flash
I made a backup of my stock 404 on cwm and twerp so It's easily reversible in either.
Similar to this post - http://forum.xda-developers.com/showthread.php?p=45795997#post45795997
It involves flashing Pi-llama 1.4 via adb and then installing the custom rom over the top.
Ran into all sorts of issues, would hang on the third data write, so I cancel it and then it would continue etc... and install
Now I'm up and running I've got half PiLlama and this rom I put on, battery drain is bad and the clock process crashes when I try and set an alarm. Otherwise it's great.
Any ideas? Seems to be the data partition causing the problems.
I'm rooted and unlocked, thought I'd add.
Flacid Monkey said:
I've tried in twrp and cwm/cwm touch - I get a boot loop no matter which rom I flash
I made a backup of my stock 404 on cwm and twerp so It's easily reversible in either.
Similar to this post - http://forum.xda-developers.com/showthread.php?p=45795997#post45795997
It involves flashing Pi-llama 1.4 via adb and then installing the custom rom over the top.
Ran into all sorts of issues, would hang on the third data write, so I cancel it and then it would continue etc... and install
Now I'm up and running I've got half PiLlama and this rom I put on, battery drain is bad and the clock process crashes when I try and set an alarm. Otherwise it's great.
Any ideas? Seems to be the data partition causing the problems.
Click to expand...
Click to collapse
Damn! Please can someone move this to http://forum.xda-developers.com/razr-i/help Posted it in here by accident
I you want to flash a custom rom just don't wipe data and don't do a format /wipe data
The problem with that is it has previous rom stuff still installed.
I like a clean fresh install of a rom, so no contacts, messages, apps etc...
There is no way to do this without a bootloop.
Flacid Monkey said:
The problem with that is it has previous rom stuff still installed.
I like a clean fresh install of a rom, so no contacts, messages, apps etc...
There is no way to do this without a bootloop.
Click to expand...
Click to collapse
flash a stock rom via rsd-lite..this will wipe the data too..then flash a custom rom
antkalaitzakis96 said:
flash a stock rom via rsd-lite..this will wipe the data too..then flash a custom rom
Click to expand...
Click to collapse
Boot loop.
Get to the rom boot animation and it does the updating apps then boot loops back to the moto screen and rom animation then repeats until i power off and restore a backup.
Thank you both for suggestions so far. Getting closer to solving
Sent from my XT890 using XDA Premium 4 mobile app
Flacid Monkey said:
Boot loop.
Get to the rom boot animation and it does the updating apps then boot loops back to the moto screen and rom animation then repeats until i power off and restore a backup.
Thank you both for suggestions so far. Getting closer to solving
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
u using cwm?
before flash a rom -> wipe data /system / cache! / dalvik chache -> then flash!
if this dont help do above + wipe battery stats then flash the rom.
have fun.
regards
pangyaaaaaa said:
u using cwm?
before flash a rom -> wipe data /system / cache! / dalvik chache -> then flash!
if this dont help do above + wipe battery stats then flash the rom.
have fun.
regards
Click to expand...
Click to collapse
Yes, I'm using cwm. Tried touch and twrp.
Tried the above, same bootloop.
Only works if i leave my stock 404, push pillama 1.4 via adb and then flash the custom ROM over that in cwm.
This leaves residue from 404 and pillama on my phone though.
Sent from my XT890 using XDA Premium 4 mobile app
Flacid Monkey said:
Yes, I'm using cwm. Tried touch and twrp.
Tried the above, same bootloop.
Only works if i leave my stock 404, push pillama 1.4 via adb and then flash the custom ROM over that in cwm.
This leaves residue from 404 and pillama on my phone though.
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Does stock 404 mean, you are still on ICS?
If so why don't you flash JB with RSD-Lite and try again installing a custom rom?
Can u make a logcat about it?
ICuaI said:
Does stock 404 mean, you are still on ICS?
If so why don't you flash JB with RSD-Lite and try again installing a custom rom?
Click to expand...
Click to collapse
Trying this now
Hazou said:
Can u make a logcat about it?
Click to expand...
Click to collapse
Will try the above then if it doesn't work I'll log it :good:
So I tried RSD lite with Android 4.1.2 Blur_Version.91.2.26001.XT890.Retail.en.EU
No dice. Failed at 7/16 System_Signed
This royally put me in a bad place. 45 minutes of ADB later, I'm back on my CWM backup of 404.
Gonna clean the logs and start from scratch
Flacid Monkey said:
So I tried RSD lite with Android 4.1.2 Blur_Version.91.2.26001.XT890.Retail.en.EU
No dice. Failed at 7/16 System_Signed
This royally put me in a bad place. 45 minutes of ADB later, I'm back on my CWM backup of 404.
Gonna clean the logs and start from scratch
Click to expand...
Click to collapse
I have the same problem and I am on Stock 4.1.2. I have given up and no longer have a rooted phone with a custom ROM. I would, however, be grateful if someone could find a solution
If you are on 404 and trying to get to 4.1.2 you can root your phone then use the following method to unroot and install 4.1.2. You can then root again if you wish.
http://forum.xda-developers.com/showthread.php?t=2398347
grampsharry said:
I have the same problem and I am on Stock 4.1.2. I have given up and no longer have a rooted phone with a custom ROM. I would, however, be grateful if someone could find a solution
If you are on 404 and trying to get to 4.1.2 you can root your phone then use the following method to unroot and install 4.1.2. You can then root again if you wish.
http://forum.xda-developers.com/showthread.php?t=2398347
Click to expand...
Click to collapse
Thank you will give that a go.
I've got a problem now after trying the official 4.1.2 upgrade which failed miserably, the boot image has changed to the warning unlocked phone bla bla bla
My SMS centre number keeps disappearing stopping texts sending. Receiving and calling work fine. Tried the fixes online but all work for two minutes then it disappears again.
Can't factory reset, just boots back up with everything as it was when it turned off. Can't get into the stock recovery so stuck with CWM or twrp
Any time I flash a rom it boot loops.
Ideas on how I can get a clean official 4.1.2 onto the phone? Re-lock bootloader, remove root and then try?
So locking bootloader and removing root does not work.
I'd advise anyone that doesn't know what they're doing to avoid it.
It pretty much soft bricked my phone.
I've started a new thread in q&a with another issue regarding multi flash in fastboot hanging on the third or fourth download.
Im certain parts of the 4.1 are still there even after formatting everything in cwm and restoring my original backup.
Having network issues, 3g and wifi etc are fine. Sms, calls and anything to do with changing network operator just stops a few minutes after boot. I can still receive fine which is odd.
What's the deal with putting a radio on over an official ROM? Yey or ney
Sent from my XT890 using XDA Premium 4 mobile app
So to set the story i had came home and rooted jb via linux method. Then presumed to use bootstrap as a recovery. I installed it and it said success. Then i presumed to change the bootloader unknowing if it was locked. So i reboot and i am stuck at Encryption unsuccessful screen and the only option is to power off or reset. What do i do ive tried to reset but it doesnt work also i tried to do a hard reset via stock recovery this also didnt work im unsure where to go about this problem now. Please help Im panicing! From what ive researched i think its soft bricked. Also there appears to be a fix on House of Bionic but it isnt clear. Lastly, I believe the problem resides with bootstrap but im unsure its just a hunch. All options will be tried.
CVanB said:
So to set the story i had came home and rooted jb via linux method. Then presumed to use bootstrap as a recovery. I installed it and it said success. Then i presumed to change the bootloader unknowing if it was locked. So i reboot and i am stuck at Encryption unsuccessful screen and the only option is to power off or reset. What do i do ive tried to reset but it doesnt work also i tried to do a hard reset via stock recovery this also didnt work im unsure where to go about this problem now. Please help Im panicing! From what ive researched i think its soft bricked. Also there appears to be a fix on House of Bionic but it isnt clear. Lastly, I believe the problem resides with bootstrap but im unsure its just a hunch. All options will be tried.
Click to expand...
Click to collapse
I had something similar happen when I first rooted my Bionic and all I did was just reflashed my phone back to stock 4.1.2 and started fresh. Not sure about any other options as I needed to get my phone back in a hurry
lancelinksp said:
I had something similar happen when I first rooted my Bionic and all I did was just reflashed my phone back to stock 4.1.2 and started fresh. Not sure about any other options as I needed to get my phone back in a hurry
Click to expand...
Click to collapse
How would i go about doing that. Would i use the stock recovery?
CVanB said:
How would i go about doing that. Would i use the stock recovery?
Click to expand...
Click to collapse
Its been a while since I have had to do it but you should use RSD Lite and a 4.1.2 hsx file for the bionic. If you google the two you should comeup with the files you will need. Sorry I cant be of more help.
EDIT: So I still have the file you need to flash using RSD Lite (Not sure what version you will need). https://dl.dropboxusercontent.com/u/80936776/cdma_targa_9.8.2O-72_VZW-22_cfc.xml.zip This file is 468 MB.
Now you just need to download RSD Lite. It only works with Windows. Windows XP is probably your best bet.
lancelinksp said:
Its been a while since I have had to do it but you should use RSD Lite and a 4.1.2 hsx file for the bionic. If you google the two you should comeup with the files you will need. Sorry I cant be of more help.
EDIT: So I still have the file you need to flash using RSD Lite (Not sure what version you will need). https://dl.dropboxusercontent.com/u/80936776/cdma_targa_9.8.2O-72_VZW-22_cfc.xml.zip This file is 468 MB.
Now you just need to download RSD Lite. It only works with Windows. Windows XP is probably your best bet.
Click to expand...
Click to collapse
Thanks im gonna try it out right now and ill let you know how it goes
CVanB said:
Thanks im gonna try it out right now and ill let you know how it goes
Click to expand...
Click to collapse
Well i tried it and got stuck at step 4
CVanB said:
Well i tried it and got stuck at step 4
Click to expand...
Click to collapse
UPDATE: I went into the xml file and deleted the oem step both clear and set now it is running without error :victory: just gotta wait for it to finish and ill keep updated to the end result
CVanB said:
UPDATE: I went into the xml file and deleted the oem step both clear and set now it is running without error :victory: just gotta wait for it to finish and ill keep updated to the end result
Click to expand...
Click to collapse
Did you use the file I sent a link for or did you download a different one? I could of sworn I modifed the xml and so that it wouldnt error out. Well, did you get it working completely then?
lancelinksp said:
Did you use the file I sent a link for or did you download a different one? I could of sworn I modifed the xml and so that it wouldnt error out. Well, did you get it working completely then?
Click to expand...
Click to collapse
Yes I believe you did edit it out. However I used a different link. I did get it working and rooted with the help of a linux bootable disc. Also I install safestrap correctly. But ran into a problem. I got cocky and didnt read all the instructions on flashing a rom and accidently flashed it over top of the stock rom so when i boot it loops then goes to recovery. Next i did a factory reset and wipe retried but no luck. So i did the only thing i knew to do was to make a second rom slot and install the backup i made of the stock. Which works fine no complaints. But low on storage how would i go about wiping the stock rom with out doing a complete factory reset through rsd lite again. That way i could just flash my backup on top of stock cause it wont flash properly as is. Thanks in advance
CVanB said:
Yes I believe you did edit it out. However I used a different link. I did get it working and rooted with the help of a linux bootable disc. Also I install safestrap correctly. But ran into a problem. I got cocky and didnt read all the instructions on flashing a rom and accidently flashed it over top of the stock rom so when i boot it loops then goes to recovery. Next i did a factory reset and wipe retried but no luck. So i did the only thing i knew to do was to make a second rom slot and install the backup i made of the stock. Which works fine no complaints. But low on storage how would i go about wiping the stock rom with out doing a complete factory reset through rsd lite again. That way i could just flash my backup on top of stock cause it wont flash properly as is. Thanks in advance
Click to expand...
Click to collapse
Activate the stock slot, then go to advanced wipe and select cache, dalvik cache and system. Then after the wipe you should be able to restore your stock backup to the stock slot. Then reboot. If it works you can then safely delete the other slot you created.
Im completely confused by this GT-I9070...
it seems ive tried everything and nothing works...
I wanted to upgrade my friend's GB to MIUI, downloaded the ROM, installed CWM, flashed the ROM
and the phone got stuck in bootloop.
after that i tried a couple of different ways to flash at least the stock GB firmware back,
but it got stuck in setup (Setup.apk and gapps crashing constantly)
then tried a couple of things with odin, and got completely confused and frustrated.
can anyone please help me out here (im kinda noob here in flashing with odin and stuff)
and explain how can i flash a ICS or whatever ROM that will finally work?
a ste by step walktrough would be nice
currently i somehow got back to stock recovery, tried to flash TWRP using odin, and got stuck in bootloop again.
You need to flash official jelly bean firmware first, look on sammobile or samsung-updates. After that you can flash any ROM you want trough CWM recovery :thumbup:
---------- Post added at 12:42 AM ---------- Previous post was at 12:40 AM ----------
Or if you want a little help, check this out! http://forum.xda-developers.com/showthread.php?t=2198341
sent with my S Advance
ok, can i flash it using the ordinary recovery? (stock one)
or do i have to do it via odin?
Berlovich4 said:
ok, can i flash it using the ordinary recovery? (stock one)
or do i have to do it via odin?
Click to expand...
Click to collapse
To flash the stock ROM JB (4.1.2) you need to flash with Odin. Then flash the cocore kernel so that you can get CWM. CWM will later be useful to replace the default recovery easier for you to install a Custom ROM, which you want.
Note: Flash COcore Kernel using Universal Kernel By Frapeti. Download via Playstore.
Requirements: Your device must root first.
Additional info related to how to install the Cocore Kernel, using Universal Kernel by Frapeti. Please see the thread here.
TPD-21 said:
To flash the stock ROM JB (4.1.2) you need to flash with Odin. Then flash the cocore kernel so that you can get CWM. CWM will later be useful to replace the default recovery easier for you to install a Custom ROM, which you want.
Note: Flash COcore Kernel using Universal Kernel By Frapeti. Download via Playstore.
Requirements: Your device must root first.
Additional info related to how to install the Cocore Kernel, using Universal Kernel by Frapeti. Please see the thread here.
Click to expand...
Click to collapse
Why flash root.zip and after that flash cocore kernel? Why not directly flash update.zip (CWM by shaan) after you have flashed stock, than you can install any ROM you want, no need to flash, reboot, flash, reboot.
coffeecore said:
Why flash root.zip and after that flash cocore kernel? Why not directly flash update.zip (CWM by shaan) after you have flashed stock, than you can install any ROM you want, no need to flash, reboot, flash, reboot.
Click to expand...
Click to collapse
Because it is a choice or to me personally as an alternative method that I use. Or may include other users while still using the stock ROM. So there is no harm in using any method, as long as our desired goals are achieved. In this case get a Custom ROM.
I just dont get it..
I've downloaded a stock 4.1.2 firmware, flashed it using odin, everything went ok, got the green pass from odin.
As i have turned the device on, the error on the setup wizard still exist.
It seems like all of the setup wizards on all the stock firmwares i've tried are failing.
Also the device shows gapps crash error.
Any method to root the device while being unable to go to Playstore as suggested above?
or,
any method of knowing if the device is rooted or not?
my friend played a bit with the phone and maybe have rooted it somehow..
anyway, now im kinda with the stock 4.1.2 firmware, the nest step is to root, then flash the cocore kernel, am i right?
Berlovich4 said:
I've downloaded a stock 4.1.2 firmware, flashed it using odin, everything went ok, got the green pass from odin.
As i have turned the device on, the error on the setup wizard still exist.
It seems like all of the setup wizards on all the stock firmwares i've tried are failing.
Also the device shows gapps crash error.
Any method to root the device while being unable to go to Playstore as suggested above?
or,
any method of knowing if the device is rooted or not?
my friend played a bit with the phone and maybe have rooted it somehow..
anyway, now im kinda with the stock 4.1.2 firmware, the nest step is to root, then flash the cocore kernel, am i right?
Click to expand...
Click to collapse
Do factory reset. Yes, now root and install CoCore.
Sent from my GT-I9070 using Tapatalk
I DID IT!
Fianlly, after long hours of frustration its finally done.
Flashed root.zip I found some where, flashed temporary CWM, afterwards flashed HarshJelly,
works fine at last.
Thx for the help guys!
i recieved several times a message saying that i have to install a security update (at&t), after some time i decided to install it but when i try to i get a status 7, another thing what do i need to install a custom rom on my arix hd, it has android 4.1 from at&t, unlocked bootloader, cwm, and carrier unlocked (i dont want to loose this), in my touchpad i just have to download the rom + gapss and install them from a custom recover, so i dont know if this is the same for the atrix hd, thanks in advance.
You need to be running stock recovery and stock ROM to install the update.
The update includes security patches and some modem updates. This update may be necessary for taking the OTA KK update.
audit13 said:
You need to be running stock recovery and stock ROM to install the update.
The update includes security patches and some modem updates. This update may be necessary for taking the OTA KK update.
Click to expand...
Click to collapse
ok thanks for answering, i have stock rom so, but unlocked bootloader can i install it then just by installing the stock recovery?
You may need to be unrooted in addition to having stock recovery.
If you removed too many of the att apps, that may cause the update to fail as well.
audit13 said:
You may need to be unrooted in addition to having stock recovery.
If you removed too many of the att apps, that may cause the update to fail as well.
Click to expand...
Click to collapse
where can i find stock recovery?, because when i turn the phone on it takes about 40 secs to reboot into recovery to update, so i cant do anything with it now :S
maur1c10 said:
where can i find stock recovery?, because when i turn the phone on it takes about 40 secs to reboot into recovery to update, so i cant do anything with it now :S
Click to expand...
Click to collapse
Did you phone take the update or is it automatically booting into recovery?
The best way to get the update is to flash back to stock ATT 4.1.1, take the OTA update, re-install CWM, and carry on using a custom ROM. This is exactly what I did with a Bell Canada Atrix HD.
You can try re-installing stock recovery in fastboot.
audit13 said:
Did you phone take the update or is it automatically booting into recovery?
The best way to get the update is to flash back to stock ATT 4.1.1, take the OTA update, re-install CWM, and carry on using a custom ROM. This is exactly what I did with a Bell Canada Atrix HD.
You can try re-installing stock recovery in fastboot.
Click to expand...
Click to collapse
Yeah. The quickest, sure-fire way to get in a position to take the OTA update is to flash back to stock (stock files available here). You can use RSD or MythTools, whatever works for you. Doing this will also put you back on stock recovery.
I had to do this, too, before I could take the OTA. But in my case I had modified/removed too many AT&T stock apps...
thanks to both of you, yes the phone rebooted itself like about 40 secs from turning on i was able to fix this part by formatting cache from cwm, now im gonna try to flash stock recovery
quasihellfish said:
Yeah. The quickest, sure-fire way to get in a position to take the OTA update is to flash back to stock (stock files available here). You can use RSD or MythTools, whatever works for you. Doing this will also put you back on stock recovery.
I had to do this, too, before I could take the OTA. But in my case I had modified/removed too many AT&T stock apps...
Click to expand...
Click to collapse
so i flashed the stock recovery from the stock rom, but when i go into recovery the android is down with a red exclamation sign and i cant get into the recovery menu :S, did this happen to you by any chance?
maur1c10 said:
so i flashed the stock recovery from the stock rom, but when i go into recovery the android is down with a red exclamation sign and i cant get into the recovery menu :S, did this happen to you by any chance?
Click to expand...
Click to collapse
When the dead Android dude is on the screen, tap the bottom right hand side of screen. Hopefully, a menu will appear.
audit13 said:
When the dead Android dude is on the screen, tap the bottom right hand side of screen. Hopefully, a menu will appear.
Click to expand...
Click to collapse
well i flashed the stock firmware, and the phone works fine but still the same with recovery, nothing happens if i touch on the screen or if i press volume or power button, tried to install the update anyway but it fails, hope i can somehow install KK when it comes
maur1c10 said:
well i flashed the stock firmware, and the phone works fine but still the same with recovery, nothing happens if i touch on the screen or if i press volume or power button, tried to install the update anyway but it fails, hope i can somehow install KK when it comes
Click to expand...
Click to collapse
Which stock ROM did you install? There are 2 versions of 4.1.1.
audit13 said:
Which stock ROM did you install? There are 2 versions of 4.1.1.
Click to expand...
Click to collapse
Blur_Version.98.4.20.MB886.ATT.en.US is the one that my phone already had
I think that is the ROM before the update.
I see another ROM named Blur_Version.98.5.38.MB886.ATT.en.US too.
audit13 said:
I think that is the ROM before the update.
I see another ROM named Blur_Version.98.5.38.MB886.ATT.en.US too.
Click to expand...
Click to collapse
flashed it and works fine except recovery the same issue but its updated so i can go to cwm now, thanks man
maur1c10 said:
flashed it and works fine except recovery the same issue but its updated so i can go to cwm now, thanks man
Click to expand...
Click to collapse
Did you flash 98.4.20 or 98.5.38?
audit13 said:
Did you flash 98.4.20 or 98.5.38?
Click to expand...
Click to collapse
the first time i flashed 98.4.20 the second time 98.5.38 and i have the same problem with recovery in both cases
maur1c10 said:
the first time i flashed 98.4.20 the second time 98.5.38 and i have the same problem with recovery in both cases
Click to expand...
Click to collapse
Strange. Did you flash both ROMs using RSD Lite or Myth? I had to use RSD Lite without Myth to flash 98.4.20.
audit13 said:
Strange. Did you flash both ROMs using RSD Lite or Myth? I had to use RSD Lite without Myth to flash 98.4.20.
Click to expand...
Click to collapse
i used myth (easier to use), could that make any difference?
maur1c10 said:
i used myth (easier to use), could that make any difference?
Click to expand...
Click to collapse
I got a Bell Canada Atrix HD from a co-worker. When I used Myth to flash from stock Bell to stock ATT, it would not work properly. When I used RSD with 98.4.20 without going through Myth, the ATT ROM flashed without any errors. I was able to take the OTA update, flash CWM, and revert to a custom ROM.