Can Not get to work different roms from here - Motorola Atrix HD

Hello,
Im writing here because im a newbie here and i dont have enough posts to be able to post in the actual thread under development lol.
My phone is rooted and bootloader unlocked..
I was on stock Att 4.1.1
So far i tried bootanimations and bootlogos and they are good. The problem is flashing custom rooms from here.
The only ones that worked for me are Liquid JB v2.9 and cm 10.2 from epinter..... im trying with PACrom and both of HoloBlur but no luck with them .... the pacrom stays in the infinite loop of the bootanimation.. the HoloBlur at first was looping in the bootanimation but then i did format sd via CWM and now it goes back and forward from bootanimation to "preparing desktop" and something about ASOP keyboard appears, so it keep doing that loop infinitely. I dont know what else to do.... Im flashing them via CWM
thx

try unmounting the cache in cwm before flash

frog1982 said:
try unmounting the cache in cwm before flash
Click to expand...
Click to collapse
I think is already unmounted because the only option says "mount cache"

Are you formatting the system under the mounts and storage option? You could also try formatting data and cache under that option too.
Another possible solution may be to install a stock rom (see Skeevy's thread on stock roms) before installing a custom rom.

audit13 said:
Are you formatting the system under the mounts and storage option? You could also try formatting data and cache under that option too.
Another possible solution may be to install a stock rom (see Skeevy's thread on stock roms) before installing a custom rom.
Click to expand...
Click to collapse
Yes im formating almost everything i see under mounts and storage .
Trying to install stock roms is the same problem.
Im charging to full the battery to see if that one of the problems cause was less the 50%
Another thing is im not 100% sure how to install stock roms lol
Using just Rsd Lite and thats it ?
Trying Myth Tool maybe?
Or by using CWM like i tried with the Skeevys Mexico retail?
I pretty sure the answer is right here but everything i read is involving fastboot and adb

TheTechnician said:
Yes im formating almost everything i see under mounts and storage .
Trying to install stock roms is the same problem.
Im charging to full the battery to see if that one of the problems cause was less the 50%
Click to expand...
Click to collapse
Are you using rsd or cwm to flash a stock rom? I have had no problem with flashing a Mexican Retail or Bell stock rom from Skeevy's stock rom page via CWM.You could try flashing via rsd or Myth Tools. Do you have a backup of your original rom?

audit13 said:
Are you using rsd or cwm to flash a stock rom? I have had no problem with flashing a Mexican Retail or Bell stock rom from Skeevy's stock rom page via CWM.You could try flashing via rsd or Myth Tools. Do you have a backup of your original rom?
Click to expand...
Click to collapse
Im only using cwm for stock roms, i tried to use rsd to flash mexican retail but it doesnt want to decompress.
the backup i had somehow got corrupted, something about md5 checksum
Also im having a HARD time trying to boot in recovery or in fastboot menu..

TheTechnician said:
Im only using cwm for stock roms, i tried to use rsd to flash mexican retail but it doesnt want to decompress.
the backup i had somehow got corrupted, something about md5 checksum
Click to expand...
Click to collapse
You could skip the checksum verification and just restore.

audit13 said:
You could skip the checksum verification and just restore.
Click to expand...
Click to collapse
I managed to flash the stock stock untouched Mexico rom using RSD Lite modifying the xml.
I will try later some other roms to see which one will work now lol
Thx for the replies ill be bothering later.

Related

Semi Bricked Atrix HD?

I think I bricked it. I have a Safestrapped 3.12 with no custom rom , just the stock and rooted JellyBean rom. I tried to install Awesomebeats and I gave rw permissions to build.prop for the Awesome zip install.btw i installed the Awesome zip through Safestrap. When I rebooted itjust got past the red moto label and it went gray. Doesnt continue booting. So i tried to install both ICS stock and JB stock removing the getvar lines from the xml file. But it only gaveme errors .I suppose its the safestrap not freeing the loader.
Any help?
You can't just downgrade can you? To my knowledge this is still not safe. Also, are you able to enter recovery? More information is needed
Sent from my MB886 using xda app-developers app
codecxbox said:
I think I bricked it. I have a Safestrapped 3.12 with no custom rom , just the stock and rooted JellyBean rom. I tried to install Awesomebeats and I gave rw permissions to build.prop for the Awesome zip install.btw i installed the Awesome zip through Safestrap. When I rebooted itjust got past the red moto label and it went gray. Doesnt continue booting. So i tried to install both ICS stock and JB stock removing the getvar lines from the xml file. But it only gaveme errors .I suppose its the safestrap not freeing the loader.
Any help?
Click to expand...
Click to collapse
If you installed it over stock try factory resetting, if you backed up try restoring, if neither work reflash stock.
or,
Install a custom rom in rom slot 1 such as golden rom: http://forum.xda-developers.com/showthread.php?t=2151398 (made by me)
xXckkillerXx said:
If you installed it over stock try factory resetting, if you backed up try restoring, if neither work reflash stock.
or,
Install a custom rom in rom slot 1 such as golden rom: http://forum.xda-developers.com/showthread.php?t=2151398 (made by me)
Click to expand...
Click to collapse
thats the problem. I cant reflash stock ,it gives me errors in RSDLite. yes, I still have recovery and safestrap. As a emergency i am installing goldenrom right now,but i would like to have the stock romback
codecxbox said:
thats the problem. I cant reflash stock ,it gives me errors in RSDLite. yes, I still have recovery and safestrap. As a emergency i am installing goldenrom right now,but i would like to have the stock romback
Click to expand...
Click to collapse
hmmm, I dont know what to tell you, try calling moto support about rsd lite?

Any custom rom - Boot loop

I've tried in twrp and cwm/cwm touch - I get a boot loop no matter which rom I flash
I made a backup of my stock 404 on cwm and twerp so It's easily reversible in either.
Similar to this post - http://forum.xda-developers.com/showthread.php?p=45795997#post45795997
It involves flashing Pi-llama 1.4 via adb and then installing the custom rom over the top.
Ran into all sorts of issues, would hang on the third data write, so I cancel it and then it would continue etc... and install
Now I'm up and running I've got half PiLlama and this rom I put on, battery drain is bad and the clock process crashes when I try and set an alarm. Otherwise it's great.
Any ideas? Seems to be the data partition causing the problems.
I'm rooted and unlocked, thought I'd add.
Flacid Monkey said:
I've tried in twrp and cwm/cwm touch - I get a boot loop no matter which rom I flash
I made a backup of my stock 404 on cwm and twerp so It's easily reversible in either.
Similar to this post - http://forum.xda-developers.com/showthread.php?p=45795997#post45795997
It involves flashing Pi-llama 1.4 via adb and then installing the custom rom over the top.
Ran into all sorts of issues, would hang on the third data write, so I cancel it and then it would continue etc... and install
Now I'm up and running I've got half PiLlama and this rom I put on, battery drain is bad and the clock process crashes when I try and set an alarm. Otherwise it's great.
Any ideas? Seems to be the data partition causing the problems.
Click to expand...
Click to collapse
Damn! Please can someone move this to http://forum.xda-developers.com/razr-i/help Posted it in here by accident
I you want to flash a custom rom just don't wipe data and don't do a format /wipe data
The problem with that is it has previous rom stuff still installed.
I like a clean fresh install of a rom, so no contacts, messages, apps etc...
There is no way to do this without a bootloop.
Flacid Monkey said:
The problem with that is it has previous rom stuff still installed.
I like a clean fresh install of a rom, so no contacts, messages, apps etc...
There is no way to do this without a bootloop.
Click to expand...
Click to collapse
flash a stock rom via rsd-lite..this will wipe the data too..then flash a custom rom
antkalaitzakis96 said:
flash a stock rom via rsd-lite..this will wipe the data too..then flash a custom rom
Click to expand...
Click to collapse
Boot loop.
Get to the rom boot animation and it does the updating apps then boot loops back to the moto screen and rom animation then repeats until i power off and restore a backup.
Thank you both for suggestions so far. Getting closer to solving
Sent from my XT890 using XDA Premium 4 mobile app
Flacid Monkey said:
Boot loop.
Get to the rom boot animation and it does the updating apps then boot loops back to the moto screen and rom animation then repeats until i power off and restore a backup.
Thank you both for suggestions so far. Getting closer to solving
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
u using cwm?
before flash a rom -> wipe data /system / cache! / dalvik chache -> then flash!
if this dont help do above + wipe battery stats then flash the rom.
have fun.
regards
pangyaaaaaa said:
u using cwm?
before flash a rom -> wipe data /system / cache! / dalvik chache -> then flash!
if this dont help do above + wipe battery stats then flash the rom.
have fun.
regards
Click to expand...
Click to collapse
Yes, I'm using cwm. Tried touch and twrp.
Tried the above, same bootloop.
Only works if i leave my stock 404, push pillama 1.4 via adb and then flash the custom ROM over that in cwm.
This leaves residue from 404 and pillama on my phone though.
Sent from my XT890 using XDA Premium 4 mobile app
Flacid Monkey said:
Yes, I'm using cwm. Tried touch and twrp.
Tried the above, same bootloop.
Only works if i leave my stock 404, push pillama 1.4 via adb and then flash the custom ROM over that in cwm.
This leaves residue from 404 and pillama on my phone though.
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Does stock 404 mean, you are still on ICS?
If so why don't you flash JB with RSD-Lite and try again installing a custom rom?
Can u make a logcat about it?
ICuaI said:
Does stock 404 mean, you are still on ICS?
If so why don't you flash JB with RSD-Lite and try again installing a custom rom?
Click to expand...
Click to collapse
Trying this now
Hazou said:
Can u make a logcat about it?
Click to expand...
Click to collapse
Will try the above then if it doesn't work I'll log it :good:
So I tried RSD lite with Android 4.1.2 Blur_Version.91.2.26001.XT890.Retail.en.EU
No dice. Failed at 7/16 System_Signed
This royally put me in a bad place. 45 minutes of ADB later, I'm back on my CWM backup of 404.
Gonna clean the logs and start from scratch
Flacid Monkey said:
So I tried RSD lite with Android 4.1.2 Blur_Version.91.2.26001.XT890.Retail.en.EU
No dice. Failed at 7/16 System_Signed
This royally put me in a bad place. 45 minutes of ADB later, I'm back on my CWM backup of 404.
Gonna clean the logs and start from scratch
Click to expand...
Click to collapse
I have the same problem and I am on Stock 4.1.2. I have given up and no longer have a rooted phone with a custom ROM. I would, however, be grateful if someone could find a solution
If you are on 404 and trying to get to 4.1.2 you can root your phone then use the following method to unroot and install 4.1.2. You can then root again if you wish.
http://forum.xda-developers.com/showthread.php?t=2398347
grampsharry said:
I have the same problem and I am on Stock 4.1.2. I have given up and no longer have a rooted phone with a custom ROM. I would, however, be grateful if someone could find a solution
If you are on 404 and trying to get to 4.1.2 you can root your phone then use the following method to unroot and install 4.1.2. You can then root again if you wish.
http://forum.xda-developers.com/showthread.php?t=2398347
Click to expand...
Click to collapse
Thank you will give that a go.
I've got a problem now after trying the official 4.1.2 upgrade which failed miserably, the boot image has changed to the warning unlocked phone bla bla bla
My SMS centre number keeps disappearing stopping texts sending. Receiving and calling work fine. Tried the fixes online but all work for two minutes then it disappears again.
Can't factory reset, just boots back up with everything as it was when it turned off. Can't get into the stock recovery so stuck with CWM or twrp
Any time I flash a rom it boot loops.
Ideas on how I can get a clean official 4.1.2 onto the phone? Re-lock bootloader, remove root and then try?
So locking bootloader and removing root does not work.
I'd advise anyone that doesn't know what they're doing to avoid it.
It pretty much soft bricked my phone.
I've started a new thread in q&a with another issue regarding multi flash in fastboot hanging on the third or fourth download.
Im certain parts of the 4.1 are still there even after formatting everything in cwm and restoring my original backup.
Having network issues, 3g and wifi etc are fine. Sms, calls and anything to do with changing network operator just stops a few minutes after boot. I can still receive fine which is odd.
What's the deal with putting a radio on over an official ROM? Yey or ney
Sent from my XT890 using XDA Premium 4 mobile app

cant flash any rom

atrid hd rooted unlocked and custom recovery ,but i still cant falsh anyrom just goes to black screen and if i wait long enough it goes to a green screen, wtf right was running carbon kitkat but bricked on accident and rsd back to stock 4.1.1 and now can flash at all please help...................
So, you are on Stock right now? Did you flashed with RSD? Which recovery are you using?
mauchito said:
So, you are on Stock right now? Did you flashed with RSD? Which recovery are you using?
Click to expand...
Click to collapse
yes i am stock using phil touch recovery and did flash with RSD
Try flashing the bell stock ROM, then Philz, then a custom rom. I assume your phone boots with the stock ROM properly and you receive no errors when flashing a custom ROM.
audit13 said:
Try flashing the bell stock ROM, then Philz, then a custom rom. I assume your phone boots with the stock ROM properly and you receive no errors when flashing a custom ROM.
Click to expand...
Click to collapse
MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml that is the one i used and then rerooted with myth tool and then installed philz from fastboot ...still gett a black screen when i flash new rom , and yes did wipe multiple times factory , cache , and dalvik
Try flashing the Mexico Retail or Bell Retail using RSD Lite instead of Myth.
audit13 said:
Try flashing the Mexico Retail or Bell Retail using RSD Lite instead of Myth.
Click to expand...
Click to collapse
wouldnt happen to have a bell retail link lying around would ya and i did flash with rsd only rooted with myth
Look under the development threads. I believe skeevy posted a link.
audit13 said:
Look under the development threads. I believe skeevy posted a link.
Click to expand...
Click to collapse
found it downloading now thnks ill let u no wht happens
dgross1123 said:
found it downloading now thnks ill let u no wht happens
Click to expand...
Click to collapse
To clear something up -- does your phone boot after flashing a fastboot? If no, you need to format the internal sd and change it's mount point to /data/media (use Philz CWM to do all that) -- that's a common error after downgrading from a 4.2+ rom to a 4.1.2- rom.
skeevydude said:
To clear something up -- does your phone boot after flashing a fastboot? If no, you need to format the internal sd and change it's mount point to /data/media (use Philz CWM to do all that) -- that's a common error after downgrading from a 4.2+ rom to a 4.1.2- rom.
Click to expand...
Click to collapse
ok link is a croupt file i will try the internal thing and is it ok to flash the mexico one even though im in us
dgross1123 said:
ok link is a croupt file i will try the internal thing and is it ok to flash the mexico one even though im in us
Click to expand...
Click to collapse
Just skip the gpt partition and you'll be fine.
skeevydude said:
Just skip the gpt partition and you'll be fine.
Click to expand...
Click to collapse
noob question wht is gtp partition .thts a term i havent heard with android
dgross1123 said:
noob question wht is gtp partition .thts a term i havent heard with android
Click to expand...
Click to collapse
Partition table. Our equivalent to a PC's mbr or gpt (newer more advanced mbr). Its unable to be downgraded.
ok well im now back fully stock, rooted and, runnin philz recovery i couldnt get either bell or mexico one to work should i try to flash now
dgross1123 said:
ok well im now back fully stock, rooted and, runnin philz recovery i couldnt get either bell or mexico one to work should i try to flash now
Click to expand...
Click to collapse
Yep, just boot into recovery and make nandroid backup saved to the external sd before you flash anything (you risk wiping it accidentally if stored to the internal sd). That way if anything goes wrong all you have to do is boot into recovery and restore your backup.
skeevydude said:
Yep, just boot into recovery and make nandroid backup saved to the external sd before you flash anything (you risk wiping it accidentally if stored to the internal sd). That way if anything goes wrong all you have to do is boot into recovery and restore your backup.
Click to expand...
Click to collapse
ok so i still get noting tried to flash cm10 after full wipe and still only get to unlocked bootloader screen then the screen goes black does anyone have the jb ota update that works
dgross1123 said:
ok so i still get noting tried to flash cm10 after full wipe and still only get to unlocked bootloader screen then the screen goes black does anyone have the jb ota update that works
Click to expand...
Click to collapse
Try flashing a CM11 ROM. I use Validus 5.1 on mine and it's great.
audit13 said:
Try flashing a CM11 ROM. I use Validus 5.1 on mine and it's great.
Click to expand...
Click to collapse
ok so valdius worked wtf havent been able to flash for weeks thk u guys
dgross1123 said:
ok so valdius worked wtf havent been able to flash for weeks thk u guys
Click to expand...
Click to collapse
Glad you got it to work. There are other great ROMs out there to use while we wait for the official KK ROM, if it ever comes.

[Q] need urgent help! bricked it

hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk
Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge
Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.

Install JB over KK

Hi, i need instal JB version but i have KK on my Razr i xt890 so somebody make this? have problem? or brick my phone?
fxiketo said:
Hi, i need instal JB version but i have KK on my Razr i xt890 so somebody make this? have problem? or brick my phone?
Click to expand...
Click to collapse
Don't!!! Never flash the JB version over KK if u use RSD-Lite (The phone will be software bricked). Only do it manual by flashing only the system, recovery and boot and erasing the data and cache by using fastboot. Look it up
Hazou said:
Don't!!! Never flash the JB version over KK if u use RSD-Lite (The phone will be software bricked). Only do it manual by flashing only the system, recovery and boot and erasing the data and cache by using fastboot. Look it up
Click to expand...
Click to collapse
Thanks so much Hazou, so i have unlock bootloader in my xt890 and have TWRP i can flash some custom rom like this for example > [ROM] Motorola RAZR i - One V.2.4.0 [JB 4.1.2] ( http://forum.xda-developers.com/showthread.php?t=2517321 ) or another, if i flash and erase all data is work? i need back to JB because have problem with my sin card
Thanks Hazou
I did it i was on cm11, did an mistake and the phone was in bootloop. Every solution didn't work so I've flashed with RSD lite and after finishing I saw it was a jellybean rom but it worked. after the first start my phone said there is an update to kitkat for download. (I have an unlocked bootloader)
Oh wait, ...
We are talking about JB. KK doesnt change anything important. Its safe to flash.
As long as u dont touch a ICS package its all good.
Sry, my bad.
I try install with twrp and cwm but get error to mount sd card, i try a lot and nothing work... finally i install stock rom and work fine... i install JB version... thanks a lot for all posts reply

Categories

Resources