Install JB over KK - RAZR i Q&A, Help & Troubleshooting

Hi, i need instal JB version but i have KK on my Razr i xt890 so somebody make this? have problem? or brick my phone?

fxiketo said:
Hi, i need instal JB version but i have KK on my Razr i xt890 so somebody make this? have problem? or brick my phone?
Click to expand...
Click to collapse
Don't!!! Never flash the JB version over KK if u use RSD-Lite (The phone will be software bricked). Only do it manual by flashing only the system, recovery and boot and erasing the data and cache by using fastboot. Look it up

Hazou said:
Don't!!! Never flash the JB version over KK if u use RSD-Lite (The phone will be software bricked). Only do it manual by flashing only the system, recovery and boot and erasing the data and cache by using fastboot. Look it up
Click to expand...
Click to collapse
Thanks so much Hazou, so i have unlock bootloader in my xt890 and have TWRP i can flash some custom rom like this for example > [ROM] Motorola RAZR i - One V.2.4.0 [JB 4.1.2] ( http://forum.xda-developers.com/showthread.php?t=2517321 ) or another, if i flash and erase all data is work? i need back to JB because have problem with my sin card
Thanks Hazou

I did it i was on cm11, did an mistake and the phone was in bootloop. Every solution didn't work so I've flashed with RSD lite and after finishing I saw it was a jellybean rom but it worked. after the first start my phone said there is an update to kitkat for download. (I have an unlocked bootloader)

Oh wait, ...
We are talking about JB. KK doesnt change anything important. Its safe to flash.
As long as u dont touch a ICS package its all good.
Sry, my bad.

I try install with twrp and cwm but get error to mount sd card, i try a lot and nothing work... finally i install stock rom and work fine... i install JB version... thanks a lot for all posts reply

Related

Bootloop after every rom i flash

I get bootloop after every rom i flash ??
Rooted and Unlocked bootloader, maybe im flashing wrong ?
currently have Pi-Llama 1.4 installed tried flashing 1.5 but get bootloop tried clean install of Omar's rom but still get bootlooop
anyone have any idea whats going on ?
ryanraven said:
I get bootloop after every rom i flash ??
Rooted and Unlocked bootloader, maybe im flashing wrong ?
currently have Pi-Llama 1.4 installed tried flashing 1.5 but get bootloop tried clean install of Omar's rom but still get bootlooop
anyone have any idea whats going on ?
Click to expand...
Click to collapse
Facin the same issue as you. Currently the only sollution i could find is flash Omar's rom over Pi-Llama. With this way you won't have bootloops.
sky0165 said:
Facin the same issue as you. Currently the only sollution i could find is flash Omar's rom over Pi-Llama. With this way you won't have bootloops.
Click to expand...
Click to collapse
when flashing over Pi-Llama do you wipe anything ? tried it before but had force close on GMAIL and CLOCK
ryanraven said:
when flashing over Pi-Llama do you wipe anything ? tried it before but had force close on GMAIL and CLOCK
Click to expand...
Click to collapse
After flashing I do a System/Cache/data/SDCard wipe and reboot. Then I enter Fastboot, connect USB to the phone, open ADB and flash Pi-Llama's system.ext4 and boot.img using a command which I forgot. I reboot again, wait for the system loads everything, reboot to CWM and finally flash Omar's over it.
The pre-install with Pi-llama 1.4 works also for 1.5, but as soon as i wipe data i have bootloop.
We need a "system.img.ext4" like on Pi-llama, than we can use the 1.4 script for install - i think this should work.
FourOne82 said:
The pre-install with Pi-llama 1.4 works also for 1.5, but as soon as i wipe data i have bootloop.
We need a "system.img.ext4" like on Pi-llama, than we can use the 1.4 script for install - i think this should work.
Click to expand...
Click to collapse
yeah would help some developers don't really show clear instructions on how to flash unless they too have know idea lol :') i remember the good olds days where all you needed to wipe was cache :') i miss them days
Asked for an ext4 system image in Omars thread, maybe someone can help.
Maybe its something to do with SD card tries everything possible just doesn't seem to work and developers won't do a clean flash on their own phones to check the problem
Sent from my XT890 using xda app-developers app
FourOne82 said:
Asked for an ext4 system image in Omars thread, maybe someone can help.
Click to expand...
Click to collapse
Managed to get the ROMs booting but with restoring data partition from stock my I backed up, clock force closes on startup though
Sent from my XT890 using xda premium
FourOne82 said:
The pre-install with Pi-llama 1.4 works also for 1.5, but as soon as i wipe data i have bootloop.
We need a "system.img.ext4" like on Pi-llama, than we can use the 1.4 script for install - i think this should work.
Click to expand...
Click to collapse
Hi, i have the some problem, I cant flash any modded rom after a rsd lite flash.
Any ideas, can you fix this problem?
Thanxs

Can Not get to work different roms from here

Hello,
Im writing here because im a newbie here and i dont have enough posts to be able to post in the actual thread under development lol.
My phone is rooted and bootloader unlocked..
I was on stock Att 4.1.1
So far i tried bootanimations and bootlogos and they are good. The problem is flashing custom rooms from here.
The only ones that worked for me are Liquid JB v2.9 and cm 10.2 from epinter..... im trying with PACrom and both of HoloBlur but no luck with them .... the pacrom stays in the infinite loop of the bootanimation.. the HoloBlur at first was looping in the bootanimation but then i did format sd via CWM and now it goes back and forward from bootanimation to "preparing desktop" and something about ASOP keyboard appears, so it keep doing that loop infinitely. I dont know what else to do.... Im flashing them via CWM
thx
try unmounting the cache in cwm before flash
frog1982 said:
try unmounting the cache in cwm before flash
Click to expand...
Click to collapse
I think is already unmounted because the only option says "mount cache"
Are you formatting the system under the mounts and storage option? You could also try formatting data and cache under that option too.
Another possible solution may be to install a stock rom (see Skeevy's thread on stock roms) before installing a custom rom.
audit13 said:
Are you formatting the system under the mounts and storage option? You could also try formatting data and cache under that option too.
Another possible solution may be to install a stock rom (see Skeevy's thread on stock roms) before installing a custom rom.
Click to expand...
Click to collapse
Yes im formating almost everything i see under mounts and storage .
Trying to install stock roms is the same problem.
Im charging to full the battery to see if that one of the problems cause was less the 50%
Another thing is im not 100% sure how to install stock roms lol
Using just Rsd Lite and thats it ?
Trying Myth Tool maybe?
Or by using CWM like i tried with the Skeevys Mexico retail?
I pretty sure the answer is right here but everything i read is involving fastboot and adb
TheTechnician said:
Yes im formating almost everything i see under mounts and storage .
Trying to install stock roms is the same problem.
Im charging to full the battery to see if that one of the problems cause was less the 50%
Click to expand...
Click to collapse
Are you using rsd or cwm to flash a stock rom? I have had no problem with flashing a Mexican Retail or Bell stock rom from Skeevy's stock rom page via CWM.You could try flashing via rsd or Myth Tools. Do you have a backup of your original rom?
audit13 said:
Are you using rsd or cwm to flash a stock rom? I have had no problem with flashing a Mexican Retail or Bell stock rom from Skeevy's stock rom page via CWM.You could try flashing via rsd or Myth Tools. Do you have a backup of your original rom?
Click to expand...
Click to collapse
Im only using cwm for stock roms, i tried to use rsd to flash mexican retail but it doesnt want to decompress.
the backup i had somehow got corrupted, something about md5 checksum
Also im having a HARD time trying to boot in recovery or in fastboot menu..
TheTechnician said:
Im only using cwm for stock roms, i tried to use rsd to flash mexican retail but it doesnt want to decompress.
the backup i had somehow got corrupted, something about md5 checksum
Click to expand...
Click to collapse
You could skip the checksum verification and just restore.
audit13 said:
You could skip the checksum verification and just restore.
Click to expand...
Click to collapse
I managed to flash the stock stock untouched Mexico rom using RSD Lite modifying the xml.
I will try later some other roms to see which one will work now lol
Thx for the replies ill be bothering later.

looking for a stock firmware

Hi,
my phone is currently stuck in logo and i can enter download mode only. running 4.1 jb. tried searching and all the solution given was to flash using stock fw via odin. problem is i got my 4.1.2 thru kies(i9070dxamd1 globe philippines) i tried sammobile but only 1 carrier is provided. anyone got i9070dxamd1 globe philippines there? or any link where i could download it?
thanks =)
tsikoske said:
Hi,
my phone is currently stuck in logo and i can enter download mode only. running 4.1 jb. tried searching and all the solution given was to flash using stock fw via odin. problem is i got my 4.1.2 thru kies(i9070dxamd1 globe philippines) i tried sammobile but only 1 carrier is provided. anyone got i9070dxamd1 globe philippines there? or any link where i could download it?
thanks =)
Click to expand...
Click to collapse
I think that you can flash that Globe version too (just pay attention is it P or not (firmware and your phone), it is just difference in bloatware from that provider.
Try looking on samsung-updates.com too.
shut_down said:
I think that you can flash that Globe version too (just pay attention is it P or not (firmware and your phone), it is just difference in bloatware from that provider.
Try looking on samsung-updates.com too.
Click to expand...
Click to collapse
its i9070 only. i found some fw in officialrom.com i think and it has same build version from live.samsung-updates.com.
the problem with my phone is that i was running twrp and a custom rom tried installing carbon over it. it was a success but then i dont like much the carbon custom rom so i tried to reflash it thru recovery. boot to recovery using quickboot(phone got a busted volume keys) i found out that twrp was replace with cwm so i wipe data/cache/factory and flash it with cocore+twrp then reboot system and it got stock in boot logo. but i can go to download mode volume down+home+power. only problem is volume up isnt working lol. so i order volume keys waiting for it to arrive so that i could install it and try to fix my phone. i still dont know yet if i could go to recovery mode.
thanks =)
tsikoske said:
its i9070 only. i found some fw in officialrom.com i think and it has same build version from live.samsung-updates.com.
the problem with my phone is that i was running twrp and a custom rom tried installing carbon over it. it was a success but then i dont like much the carbon custom rom so i tried to reflash it thru recovery. boot to recovery using quickboot(phone got a busted volume keys) i found out that twrp was replace with cwm so i wipe data/cache/factory and flash it with cocore+twrp then reboot system and it got stock in boot logo. but i can go to download mode volume down+home+power. only problem is volume up isnt working lol. so i order volume keys waiting for it to arrive so that i could install it and try to fix my phone. i still dont know yet if i could go to recovery mode.
thanks =)
Click to expand...
Click to collapse
You should do reboot recovery option in TWRP. But still you can't go back from CM10.2 and CM11 to stock without repartitioning /preload partition. You will get bootloop too... You must flash stock firmware or use this: http://forum.xda-developers.com/showthread.php?t=2612540
shut_down said:
You should do reboot recovery option in TWRP. But still you can't go back from CM10.2 and CM11 to stock without repartitioning /preload partition. You will get bootloop too... You must flash stock firmware or use this: http://forum.xda-developers.com/showthread.php?t=2612540
Click to expand...
Click to collapse
i wasnt planning on going to stock. i was trying to install pure vanilla over carbon
tsikoske said:
i wasnt planning on going to stock. i was trying to install pure vanilla over carbon
Click to expand...
Click to collapse
You was not planning, but you must repartition that preload partition. With that script or with flashing stock firmware.
P.S. If you mean ROM Pure Vanilla - it is based on stock ROM. It is themed stock ROM.
shut_down said:
You was not planning, but you must repartition that preload partition. With that script or with flashing stock firmware.
P.S. If you mean ROM Pure Vanilla - it is based on stock ROM. It is themed stock ROM.
Click to expand...
Click to collapse
oh ok. sorry my phone is fine now btw. flash with odin =)

cant flash any rom

atrid hd rooted unlocked and custom recovery ,but i still cant falsh anyrom just goes to black screen and if i wait long enough it goes to a green screen, wtf right was running carbon kitkat but bricked on accident and rsd back to stock 4.1.1 and now can flash at all please help...................
So, you are on Stock right now? Did you flashed with RSD? Which recovery are you using?
mauchito said:
So, you are on Stock right now? Did you flashed with RSD? Which recovery are you using?
Click to expand...
Click to collapse
yes i am stock using phil touch recovery and did flash with RSD
Try flashing the bell stock ROM, then Philz, then a custom rom. I assume your phone boots with the stock ROM properly and you receive no errors when flashing a custom ROM.
audit13 said:
Try flashing the bell stock ROM, then Philz, then a custom rom. I assume your phone boots with the stock ROM properly and you receive no errors when flashing a custom ROM.
Click to expand...
Click to collapse
MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml that is the one i used and then rerooted with myth tool and then installed philz from fastboot ...still gett a black screen when i flash new rom , and yes did wipe multiple times factory , cache , and dalvik
Try flashing the Mexico Retail or Bell Retail using RSD Lite instead of Myth.
audit13 said:
Try flashing the Mexico Retail or Bell Retail using RSD Lite instead of Myth.
Click to expand...
Click to collapse
wouldnt happen to have a bell retail link lying around would ya and i did flash with rsd only rooted with myth
Look under the development threads. I believe skeevy posted a link.
audit13 said:
Look under the development threads. I believe skeevy posted a link.
Click to expand...
Click to collapse
found it downloading now thnks ill let u no wht happens
dgross1123 said:
found it downloading now thnks ill let u no wht happens
Click to expand...
Click to collapse
To clear something up -- does your phone boot after flashing a fastboot? If no, you need to format the internal sd and change it's mount point to /data/media (use Philz CWM to do all that) -- that's a common error after downgrading from a 4.2+ rom to a 4.1.2- rom.
skeevydude said:
To clear something up -- does your phone boot after flashing a fastboot? If no, you need to format the internal sd and change it's mount point to /data/media (use Philz CWM to do all that) -- that's a common error after downgrading from a 4.2+ rom to a 4.1.2- rom.
Click to expand...
Click to collapse
ok link is a croupt file i will try the internal thing and is it ok to flash the mexico one even though im in us
dgross1123 said:
ok link is a croupt file i will try the internal thing and is it ok to flash the mexico one even though im in us
Click to expand...
Click to collapse
Just skip the gpt partition and you'll be fine.
skeevydude said:
Just skip the gpt partition and you'll be fine.
Click to expand...
Click to collapse
noob question wht is gtp partition .thts a term i havent heard with android
dgross1123 said:
noob question wht is gtp partition .thts a term i havent heard with android
Click to expand...
Click to collapse
Partition table. Our equivalent to a PC's mbr or gpt (newer more advanced mbr). Its unable to be downgraded.
ok well im now back fully stock, rooted and, runnin philz recovery i couldnt get either bell or mexico one to work should i try to flash now
dgross1123 said:
ok well im now back fully stock, rooted and, runnin philz recovery i couldnt get either bell or mexico one to work should i try to flash now
Click to expand...
Click to collapse
Yep, just boot into recovery and make nandroid backup saved to the external sd before you flash anything (you risk wiping it accidentally if stored to the internal sd). That way if anything goes wrong all you have to do is boot into recovery and restore your backup.
skeevydude said:
Yep, just boot into recovery and make nandroid backup saved to the external sd before you flash anything (you risk wiping it accidentally if stored to the internal sd). That way if anything goes wrong all you have to do is boot into recovery and restore your backup.
Click to expand...
Click to collapse
ok so i still get noting tried to flash cm10 after full wipe and still only get to unlocked bootloader screen then the screen goes black does anyone have the jb ota update that works
dgross1123 said:
ok so i still get noting tried to flash cm10 after full wipe and still only get to unlocked bootloader screen then the screen goes black does anyone have the jb ota update that works
Click to expand...
Click to collapse
Try flashing a CM11 ROM. I use Validus 5.1 on mine and it's great.
audit13 said:
Try flashing a CM11 ROM. I use Validus 5.1 on mine and it's great.
Click to expand...
Click to collapse
ok so valdius worked wtf havent been able to flash for weeks thk u guys
dgross1123 said:
ok so valdius worked wtf havent been able to flash for weeks thk u guys
Click to expand...
Click to collapse
Glad you got it to work. There are other great ROMs out there to use while we wait for the official KK ROM, if it ever comes.

[Q] PROBLEM!!! Can't flash anything bellow ics

Hi! I have an lg OB running ics 4.0.4(V30B). The phone it's rooted and I have CWM installed from Rom Manager. I can acces Recovery from Rom Manager and with the phone off ( VOLUME PLUS + G KEY). The problem is that I can't flash any Rom bellow ics (not even with Smart Flash Tools) without getting bootloops. I can flash Roms based on ics and above( IZS,CM10.1,NAMELESS ROM NIGHTLIES 4.4.4).
Could someone help me?
Nobody?
JoKeR[RO-VL] said:
Nobody?
Click to expand...
Click to collapse
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
androcraze said:
I was hoping you fixed the issue. I don't know what to do.
It's a matter of unlocking the boot loader. Once you do that, you can jump back and forth between ICS-based ROMs and everything else.
Gingerbread ROMs include the boot loader (marvel and Huexxx).
Click to expand...
Click to collapse
Man I can flash ICS-based ROMs .JB and KK, I can't flash GB stock or GB-based ROMs, not even with SFT.
I think the bootloader it's unlocked because I can acces CWM from switch off phone(key combo)....I am confused because i read many tutorials but they are contradictory
That happends also with me 2 times.
Just flash CWM recovery again.
ptxpaulo said:
That happends also with me 2 times.
Just flash CWM recovery again.
Click to expand...
Click to collapse
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
JoKeR[RO-VL] said:
Already tried....when i try to flash a GB ROM stock or custom GB-based Rom I get stuck in a bootloop.Same story with Smart Flash Tools...SFT says "succes", I hear the "ta daaa" sound ,phone reboots but stuck in a bootloop.
Click to expand...
Click to collapse
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
ptxpaulo said:
Try toii install a ROM right after rebooting from flash.
What I did is: Install a JB ROM, After, I reinstall CWM with ADB, reboot and then I could install any rom.
Click to expand...
Click to collapse
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
JoKeR[RO-VL] said:
Sorry but how to install CWM with ADB? I've installed CWM(6.0.1.4) only from Rom Manager....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1613183
ptxpaulo said:
http://forum.xda-developers.com/showthread.php?t=1613183
Click to expand...
Click to collapse
Doesn't work and its stuck on lg logo now
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
seby24gl said:
Try to flash first original Froyo 2.2.2 , and then you can upgrade to GB ! Worked for me !
Click to expand...
Click to collapse
Did you unlocked the bootloader first? can you put a link with your froyo and SFT?
I am from Romania so I need an Europe Open
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
Thanks bro! Hope it works.
seby24gl said:
No, I don't tried to unlock bootloader, but like you , I got the bootloops every time I downgrade from ICS, Nameless or cyanogen roms . I use original Froyo - flashed with SFT , then upgrade to GB with Cwm recovery patch- flashed with SFT, then boot to recovery and install Nameless. I will give you the links, once I uploaded to my dropbox.
Here, I hope will help you : https://www.dropbox.com/s/psniks1yvqwymy9/firmware v10a-europe-p970.rar
Click to expand...
Click to collapse
JoKeR[RO-VL] said:
Thanks bro! Hope it works.
Click to expand...
Click to collapse
It's not working. Don't know what to try
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
JoKeR[RO-VL] said:
UP! When I use the bootloader unlocker app the flashing process take about 2-3 seconds and the app closing by itself without any message like "succes". I even tried to flash a u-boot img uploaded by huexxx and at the second reboot the phone stucks on lg logo without flashing leds
Click to expand...
Click to collapse
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
Did you already try the alternative way without the app? Which means load the files to your sdcard and afterwards type the dd if=xxxx of=xxxx? This could show if it works or fails. And did you ever flash the LU5900 port? So the early ICS ROM released by Redy, Gabwerkz and me. Try the manual unlock first.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
JoKeR[RO-VL] said:
NO I did not flash the LU5900 port.Where do I need to type dd if ? I use windows 7 on my laptop.
Click to expand...
Click to collapse
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
N00BY0815 said:
As written in the thread, type it into terminal emulator (an app). Read the thread carefully please.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
OK I have the terminal emulator on my phone.
I've read the thread and it says "Move this two files, bootloader and recovery to the root of memory sdcard;
Enter in the command line
su
dd if=/sdcard/u-boot.img of=/dev/block/mmcblk0p2
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p4
And reboot or reboot recovery."
I have downloaded all on my laptop(bootloader recovery and su) but I am confuse....what's with that "su"?
Do I have to put it on the root of the sdcard too?
Sorry for my noob question

Categories

Resources