Hello,
I just ported cm10 from the razr hd and changed everything to be Atrix HD and AT&T (Dear Bell users, you can still use this rom, it would work just as fine as AT&T )
Disclaimer:
I'm not responsible if this bricks your phone. It was your choice, NOT MINE!!!
Downloads:
CM10.0 1st build: http://d-h.st/FWb
Gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Thanks to the razr qcom dev team!!!
Screenshots:
Coming Soon...
Known bugs:
Camera (of course, because early cm builds usually have camera not working)
Signal bar (data works, just the signal bar doesn't)
Wifi (won't turn on, maybe)
NFC menu (It just needs to be removed, our phones don't have NFC )
Any more just PM me
Installation:
1. Boot into Safestrap Recovery
2. Create rom slot 1 (if you already created it, activate and wipe system and factory reset)
3. Install cm10.0 as first zip and gapps as second zip
The only reason I'm releasing this, is because it will work on a Stock kernel and ramdisk, unlike CM10.1
So basically the only issues are non working camera and WiFi? Any fixes coming?
sent from my JokerMATRIX HD MAXX
deeje00 said:
So basically the only issues are non working camera and WiFi? Any fixes coming?
sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Yeah,
I just want everybody to get a basic idea.
Yeah, done uploading...
tcf38012 said:
Hello,
I just ported cm10 from the razr hd and changed everything to be Atrix HD and AT&T (Dear Bell users, you can still use this rom, it would work just as fine as AT&T )
Disclaimer:
I'm not responsible if this bricks your phone. It was your choice, NOT MINE!!!
Downloads:
CM10.0 1st build: http://d-h.st/FWb
Gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Thanks to the razr qcom dev team!!!
Screenshots:
Coming Soon...
Known bugs:
Camera (of course, because early cm builds usually have camera not working)
Signal bar (data works, just the signal bar doesn't)
Wifi (won't turn on, maybe)
NFC menu (It just needs to be removed, our phones don't have NFC )
Any more just PM me
Installation:
1. Boot into Safestrap Recovery
2. Create rom slot 1 (if you already created it, activate and wipe system and factory reset)
3. Install cm10.0 as first zip and gapps as second zip
The only reason I'm releasing this, is because it will work on a Stock kernel and ramdisk, unlike CM10.1
Click to expand...
Click to collapse
Looking forward to it fellow dev! :good: Any known bugs? REALLY EXCITED!
Niiiiiiiiice!
Appreciate all the work budd, cheers!
Sent from my MB886 using Tapatalk 2
Abu-7abash said:
Niiiiiiiiice!
Appreciate all the work budd, cheers!
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
For real though this rom is buttery!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
So yes or no on fixes coming for camera and WiFi? And it says file not found on gapps
sent from my JokerMATRIX HD MAXX
deeje00 said:
So yes or no on fixes coming for camera and WiFi? And it says file not found on gapps
sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
I almost got wifi fixed.
I fixed Nfc to.
just do this with adb shell:
Code:
mount -o rw,remount /system
rm /system/app/Nfc.apk
I'll add that next release
And I fixed the link.
I love that romming is starting to pick up, and i hope he gets his bounty from that other thread. Now its time to fire up linux and root this sucker! thanks again devs! Liked
tcf38012 said:
I almost got wifi fixed.
I fixed Nfc to.
just do this with adb shell:
Code:
mount -o rw,remount /system
rm /system/app/Nfc.apk
I'll add that next release
And I fixed the link.
Click to expand...
Click to collapse
Other than all that stuff. Only issue was extreme battery drain, I plugged my phone in at 19% and with little use (texting) it went down to 1%. My phone has never ever gotten down further than like 14%.
Thought this phone didn't support NFC?
sent from my JokerMATRIX HD MAXX
deeje00 said:
Thought this phone didn't support NFC?
sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
Thats why I removed it.
A random mystery is...
Most AT&T Phones don't have Nfc
Thought you said you added it my bad Lol.
sent from my JokerMATRIX HD MAXX
Damn, you beat me to posting this! I've been running CM10 as my daily for the past 2 weeks (I fixed the wifi & signal strength issues also).
Everything except camera on mine works like a charm. No battery issues whatsoever either. LMT + NavBar delete = full screen awesomeness.
progrockguy said:
Damn, you beat me to posting this! I've been running CM10 as my daily for the past 2 weeks (I fixed the wifi & signal strength issues also).
Everything except camera on mine works like a charm. No battery issues whatsoever either. LMT + NavBar delete = full screen awesomeness.
Click to expand...
Click to collapse
Sorry, since no one's getting paid, could you PM me your fixes, Thanks!!!
Try using the camera and camera related libs from ICS, should work. If not I'll look for a solution but camera should work with ICS libs. And WiFi fix is easy. There's already a method posted somewhere in our forums
Sent from my MB886 using xda app-developers app
EcHoFiiVe said:
Try using the camera and camera related libs from ICS, should work. If not I'll look for a solution but camera should work with ICS libs. And WiFi fix is easy. There's already a method posted somewhere in our forums
Click to expand...
Click to collapse
If it were that easy the razrHD devs would've had the camera working a long time ago. CM10 handles camera stuff differently than stock.
I talked to a couple of them, and I'm not a noon I know this handles differently than stock.
Sent from my MB886 using xda app-developers app
EcHoFiiVe said:
I talked to a couple of them, and I'm not a noon I know this handles differently than stock.
Click to expand...
Click to collapse
Can you post the exact camera files they told you to swap? And what about the qcom_cameraservice (sp?) file -- should that be modified or left alone? All we need is the camera working on this thing!!
I like it so far, but some of the games are pretty laggy ( like temple run 2 )
Sent from my Atrix HD using xda premium
Related
CM10.1 UNOFFICIAL (PREVIEW) for Droid Razr HD (XT926) - Consumer and Developer Edition
Well I have been working for a while and decided to release a preview build MEANING IT'S JUST A GLIMPSE OF THINGS TO COME NOT A DAILY DRIVER ....So here it is CM10.1 (4.2.1) for the Droid Razr HD. This will work on both the retail consumer edition with SafeStrap3 and on the developer edition with CWM or TWRP recovery.
Thanks as always to:
Hashcode for always answering my questions
DroidTh3ory for getting me into this
Epinter for helping me get the ball rolling and fixing wifi and other things
Google for the source and awesome android
CM for all the mods and code fixes
Click to expand...
Click to collapse
OK first things first:
SafeStrap Version 3 for Consumer edition can be found here: http://goo.im/devs/H...rap-3.05.17.apk
Follow the install and use instructions here: http://blog.hash-of-...w-to-safestrap/
Onlly install in RomSlot-1 in SafeStrap3
Click to expand...
Click to collapse
Developer Edition:
CWM Recovery: http://goo.im/devs/H...ry-vanquish.img
TWRP Recovery: http://goo.im/devs/H...ry-vanquish.img
Click to expand...
Click to collapse
Working features:
Data: Comes up in 4G
SMS/MMS: You may get random texts from VZWNMN Google for instructions to disable this
WIFI: Working in SafeStrap now as well thanks to some init*rc magic
Bluetooth: Turns on..status untested
12-5 Fix SafeStrap boot
Click to expand...
Click to collapse
What doesn't work (that I know of):
Audio in-call, NFC, Camera, Wifi Hotspot
Click to expand...
Click to collapse
Download link: http://goo.im/devs/Hashcode/vanquish/cm-10.1-20121210-UNOFFICIAL-vanquish-preview.zip
GAPPS: http://goo.im/gapps
All source modifications can be found at: http://github.com/STS-Dev-Team
As always enjoy and have fun!
dhacker29 said:
CM10.1 UNOFFICIAL (PREVIEW) for Droid Razr HD (XT926) - Consumer and Developer Edition
Well I have been working for a while and decided to release a preview build MEANING IT'S JUST A GLIMPSE OF THINGS TO COME NOT A DAILY DRIVER ....So here it is CM10.1 (4.2.1) for the Droid Razr HD. This will work on both the retail consumer edition with SafeStrap3 and on the developer edition with CWM or TWRP recovery.
OK first things first:
Download link: http://goo.im/devs/Hashcode/vanquish/cm-10.1-20121210-UNOFFICIAL-vanquish-preview.zip
GAPPS: http://goo.im/gapps
All source modifications can be found at: http://github.com/STS-Dev-Team
As always enjoy and have fun!
Click to expand...
Click to collapse
This really is an awesome accomplishment. I ran it for awhile but had to switch back. Even so it was smooth as silk. If I had known in call volume was a maybe I would have tested before flashing back. Sorry dh.
Sent from my DROID RAZR HD using Tapatalk 2
donated, thank you so much! will definitely donate again as more progress is made.
Would love to see this on the XT925, I know it's too much to ask lol.
Good job!
Sent from my XT925
so glad to see wifi is working i just flashed this cant wait to see this a daily driver
Royalfox said:
Would love to see this on the XT925, I know it's too much to ask lol.
Good job!
Sent from my XT925
Click to expand...
Click to collapse
I would image it could work on XT925...since his CM10 XT926 boots on even MB886.
Sent from my MB886 using Tapatalk 2
How long before a daily driver edition is out? I'm new to CM so sorry if this is a question I shouldn't be asking
thibaulb said:
How long before a daily driver edition is out? I'm new to CM so sorry if this is a question I shouldn't be asking
Click to expand...
Click to collapse
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
mattlgroff said:
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
Click to expand...
Click to collapse
Ok sweet. sorry if I offended anyone or anything by asking that
mattlgroff said:
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
Click to expand...
Click to collapse
+1
Awesomeness
swboland said:
+1
Click to expand...
Click to collapse
Everything works great, only issue is play store always force closes, but fast as hell cant wait to see the progress
Noob here again
Is there a step by step instructions list for installing this? Also, what is Safestrap?
thibaulb said:
Noob here again
Is there a step by step instructions list for installing this? Also, what is Safestrap?
Click to expand...
Click to collapse
No one is going to help you out much because you didn't even read the first post. There are step by step instructions including the definition and what safe strap is and does. Oh. Welcome to the community.
P.s. their are threads on new users of this type of way of installation. Hope its not coming off harsh.
Sent from my DROID RAZR HD using Tapatalk 2
manuski said:
No one is going to help you out much because you didn't even read the first post. There are step by step instructions including the definition and what safe strap is and does. Oh. Welcome to the community.
P.s. their are threads on new users of this type of way of installation. Hope its not coming off harsh.
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
Sorry for my lazyness. I couldn't view the link about safestrap because I'm at work and the site is blocked. I probably should have mentioned that in my post. I'll just check it when I get home. As far as step by step instructions, I was referring to the whole installation of CM10, rather than just the installation of safestrap
You said "Their are threads on new users of this type of way of installation". I've read over that a few times and don't quite understand what you mean. I haven't dug super super deep into these forums but I didn't see any threads about how to install CM10.
Thanks for the help
What if I:
Nandroid backup via safestrap
Install this on my xt925 to test
Is there a possibility to perma-brick or have a screwed up radio that I wouldn't be able to fix? I want to flash and play with it, but only if I can get back with a nandroid.
Actually can't I flash anything I want on a rom slot with safestrap? Can't I just go back to the stock slot at anytime?
---------- Post added at 07:09 PM ---------- Previous post was at 06:18 PM ----------
Got impatient and tried it on slot 1. Nothing worked as expected, it booted but no radios or anything would respond. I just deleted rom slot 1 and I'm back to stock.
I guess my question is, how much do I have to donate to get a working version of this for the xt925?
seh6183 said:
What if I:
Nandroid backup via safestrap
Install this on my xt925 to test
Is there a possibility to perma-brick or have a screwed up radio that I wouldn't be able to fix? I want to flash and play with it, but only if I can get back with a nandroid.
Actually can't I flash anything I want on a rom slot with safestrap? Can't I just go back to the stock slot at anytime?
---------- Post added at 07:09 PM ---------- Previous post was at 06:18 PM ----------
Got impatient and tried it on slot 1. Nothing worked as expected, it booted but no radios or anything would respond. I just deleted rom slot 1 and I'm back to stock.
I guess my question is, how much do I have to donate to get a working version of this for the xt925?
Click to expand...
Click to collapse
do·na·tion
/dōˈnāSHən/
Noun
Something that is given to a charity, esp. a sum of money.
The action of donating something.
Synonyms
gift - offering - grant - present - donative - endowment
Click to expand...
Click to collapse
Maybe you don't understand what a donation is
Epinter has an XT925 CM10 in this board, check that out.
Dhacker are you the only developer with a droid RAZR HD?
Sent from my DROID RAZR HD using Tapatalk 2
mattlgroff said:
Maybe you don't understand what a donation is
Epinter has an XT925 CM10 in this board, check that out.
Click to expand...
Click to collapse
I don't want to void my warranty just to install cm10. I'm hoping for a safestrap version.
seh6183 said:
I don't want to void my warranty just to install cm10. I'm hoping for a safestrap version.
Click to expand...
Click to collapse
Ah because of the need for an unlocked bootloader?
Sent from my DROID RAZR HD using Tapatalk 2
How's the battery life on this comparatively? Any rough feelings on % improvement?
Unlocked Bootloader required. Must flash via CWM or TWRP. Do not use Safestrap.
These ROMs are mostly stable. Expect bugs and occasional instability/crashes. Flash at your own risk.
Instructions
Make a backup beforehand
Wipe Data, Cache, and Format System
Install ROM & GApps
CM10 by Hashcode -- enable USB debugging for MTP
Bugs: lockscreen display artifacting, camera only works in 3MP or 8MP, no BT music
GPS: Settings -> Location Access -> GPS Source -> click Use Internal GPS
ROM: http://d-h.st/RQm
GApps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
OpenPDroid for CM10 -- allows total privacy control over your apps
Patch ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=1891228
PDroid Manager (required): http://forum.xda-developers.com/showthread.php?t=1994860
Undo/Removal ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=1891232
=================================================
Extra: CM10.1 by Hashcode -- no camera; if you want camera, install Epinter's 10.1 for XT926
ROM: http://goo.im/devs/Hashcode/vanquish/cm10.1
GApps: http://goo.im/gapps/gapps-jb-20130301-signed.zip
==================================================
All credit goes to Epinter, Hashcode, dhacker, and especially Dan Rosenberg for the bootloader. Donate to them if you use this!
Dan: http://vulnfactory.org/blog/2013/04/08/motorola-bootloader-unlocking/
Epinter: http://forum.xda-developers.com/donatetome.php?u=3721576
Hashcode, dhacker: http://blog.hash-of-codes.com/
Click "Thanks" for the CM10 upload. You won't find it anywhere else. Enjoy!
Nice, finally development is coming along. Dl now thanks
Sent from my XT926 using Tapatalk 2
do we need to mount system before flashing? also, do we need to wipe system?
forgot to ask in my original post, but do you have the link for gapps?
I flashed the most recent gapps from vitreous. Works fine. The camera is not present for me however :S
Sent from my XT926 using xda app-developers app
sunkim50 said:
forgot to ask in my original post, but do you have the link for gapps?
Click to expand...
Click to collapse
http://goo.im/gapps/
I flashed the cm10 and camera works. The only thing I've found is that when I turn my screen off or lock it, it doesn't really go off. Lines start appearing lightly then they get brighter and brighter... Not sure what's going on. I see cm10.1 was added as a bonus to this post. Does that mean the camera is fixed on cm10.1 also?
Sent from my XT926 using Tapatalk 2
an21281 said:
I flashed the cm10 and camera works. The only thing I've found is that when I turn my screen off or lock it, it doesn't really go off. Lines start appearing lightly then they get brighter and brighter... Not sure what's going on. I see cm10.1 was added as a bonus to this post. Does that mean the camera is fixed on cm10.1 also?
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
I'll let you know when I flash this...like...NOW
an21281 said:
I flashed the cm10 and camera works. The only thing I've found is that when I turn my screen off or lock it, it doesn't really go off. Lines start appearing lightly then they get brighter and brighter... Not sure what's going on. I see cm10.1 was added as a bonus to this post. Does that mean the camera is fixed on cm10.1 also?
Click to expand...
Click to collapse
That is an odd issue. I'm not experiencing that. Did you install any apps or modifications?
As for 10.1, I just found the file from Hashcode and linked it, so I don't know about the camera. I'm only interested in 10 for now as it's more stable. Give it a shot and let us know.
Camera does not work in 10.1, I flashed it earlier. Everything else seems pretty smooth though.
Yea, I am experiencing the same problem as the guy above. Those lines act as its like a screensaver lol idk. when it disappear, it takes awhile me to unlock the phone. Dbl press power to make sure its off then press power multiple times to turn screen back on. Other then this problem its running like a champ!
Cm 10.1- I had problems with WiFi not turning on, it did work then it just stopped
Can't make work cm10 with gsm. It's only lte/cmda. cm10.1 works fine, but constantly process com.android.phone stops...
I'm installing them over modded deodexed 4.0.4.
Should I install those ROMs over stock 4.1.1?
Sent from my DROID RAZR HD using xda app-developers app
anddep said:
Yea, I am experiencing the same problem as the guy above. Those lines act as its like a screensaver lol idk. when it disappear, it takes awhile me to unlock the phone. Dbl press power to make sure its off then press power multiple times to turn screen back on. Other then this problem its running like a champ!
Cm 10.1- I had problems with WiFi not turning on, it did work then it just stopped
Click to expand...
Click to collapse
Same problem with the lock screen here. works great besides that.
Just changed lock screen clock to center and problem disappeared
Nm still there
Sent from my XT926 using Tapatalk 2
progrockguy said:
Unlocked Bootloader required. Must flash via CWM or TWRP. Do not use Safestrap if you want a working camera.
Install ROM and GApps. Wipe Cache & Factory Reset. Then reboot.
All credit goes to Epinter, Hashcode, and especially Dan Rosenberg for the bootloader. Donate to them if you use this!
Dan: http://vulnfactory.org/blog/2013/04/08/motorola-bootloader-unlocking/
Epinter: http://forum.xda-developers.com/donatetome.php?u=3721576
Hashcode: http://blog.hash-of-codes.com/
Click "Thanks" for this upload. Enjoy!
CM10: http://d-h.st/RQm
GApps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
=================================================
BONUS: CM10.1 by Hashcode:
http://goo.im/devs/Hashcode/vanquish/cm10.1/cm-10.1-20130124-UNOFFICIAL-xt926.zip
Click to expand...
Click to collapse
What's the difference between cm10 and the bonus cm10.1? Sorry if that's a bad question..
Sent from my DROID RAZR HD using Tapatalk 2
I think one is ICS & the other is JB if I remember correctly.
Sent from my DROID RAZR HD using Tapatalk 2
Hashcodes' CM 10.1 is running like a champ other than the camera and video not worker. I believe soon that won't be an issue. I'm using it as a daily and loving it. Can't wait top see more Roms like AOKP and PA
---------- Post added at 10:55 AM ---------- Previous post was at 10:54 AM ----------
rebretz000 said:
I think one is ICS & the other is JB if I remember correctly.
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
They both are JB. 10 is 4.1 while 10.1 is 4.2
I can't get Media audio to play via speaker or Bluetooth. anyone else?
Sent from my XT926 using Tapatalk 2
itsdubai said:
What's the difference between cm10 and the bonus cm10.1? Sorry if that's a bad question..
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
CM10 is JB 4.1.2 and CM10.1 is JB 4.2.2
koftheworld said:
Same problem with the lock screen here. works great besides that.
Just changed lock screen clock to center and problem disappeared
Nm still there
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
I just changed the clock and my phone still does the same. The lines start to appear slowly in red and get brighter. It's hard to see it immediately daytime but at night you can see it easily. After a minute it's very bright though. I thought it had to do with the notification light since when you set that and try to test it the same thing happened s with screen off but much faster.
I shut off notification light since then and still there also. Never seen this issue before. Either way getting the camera working is a big step! Thanks again
Sent from my XT926 using Tapatalk 2
Looks like the CM10 download site is blocked at work for me, is there a mirror anywhere? Thanks.
Got it downloaded, working real nice so far, very smooth. I do have the lockscreen issue too. This is amazing, so glad to have CM on this phone. Thanks to all.
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: JB 4.2 will move anything in /sdcard to /sdcard/0 on first boot. If you revert back to JB 4.1 you will have to manually move things back
These are Unofficial CM 10.1 builds for the N8020 Galaxy Note 10.1 LTE.
Hi all,
Sbrissen and Darkman kindly allowed me the use of their hard work to port Sbrissens CM10.1 rom to our N8020.
I also include a zip to enable tablet mode if you want it and another zip to return to normal (thanks to autopatcher by Mateorod here http://forum.xda-developers.com/showthread.php?t=1719408).
Head on over to the original thread to say thanks and/or donate and just hit the button for me as I don't do donations.
http://forum.xda-developers.com/showthread.php?t=2333169
Also, thanks darkman for his install script which I modified the UI messages on and this uses the original optus modem software from my stock tablet rom.
Please remember I am not a dev and have only modified the basic stuff to work on our variation of the note 10.1 and as such will ignore requests. I have a very busy real life and will only keep up with original releases at my own pace.
It is recommended to flashed this in CWM .
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (http://goo.im/gapps)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-May need to get a gps lock on stock before switching to CM in order for gps to work
-BT voice search
-The APN's will need to be manually entered from your stock rom to get internet reception
Downloads:
ROM: http://d-h.st/kdu
Tablet UI: enable: http://d-h.st/dF0
disable: http://d-h.st/sxT
Thank you for your hard work!!
You make many N8020 User happy :victory: :good:
Darkman said:
Thank you for your hard work!!
You make many N8020 User happy :victory: :good:
Click to expand...
Click to collapse
Indeed, he did!
I will check it asap, but it will be tomorrow or on Sunday due to lack of time.
Anyway - many thanks, @smegg!
You're all very welcome...also have a booting cm10.2 android 4.3 but cannot get it to root ATM... Any ideas anyone?
Thanks for your hard working.
Sent from my GT-N8000 using xda app-developers app
anyone tested it?
results?
@netbums
Nice to meet you here
smegg said:
You're all very welcome...also have a booting cm10.2 android 4.3 but cannot get it to root ATM... Any ideas anyone?
Click to expand...
Click to collapse
Have you tried latest SuperSU?? Chainfire is hard working on the Root for 4.3 ... you need the new SuperSU and the neu binary.
Darkman said:
@netbums
Nice to meet you here
Have you tried latest SuperSU?? Chainfire is hard working on the Root for 4.3 ... you need the new SuperSU and the neu binary.
Click to expand...
Click to collapse
Its all good, figured out that u need USB debugging on and enabled by pressing build version 7 times in about menu. Weird way to get root. Lol
New thread up, uploading to dev host be done in half hour or so!
Finally...a CM on my tablet. Excellent work. I am still using cm 7 on my HD2 and this is my first encounter with CM10.1. Am I doing something wrong or pie controls are not working?
Sent from my gt-n8020 using Tapatalk 4 Beta
dusko_m said:
Finally...a CM on my tablet. Excellent work. I am still using cm 7 on my HD2 and this is my first encounter with CM10.1. Am I doing something wrong or pie controls are not working?
Sent from my gt-n8020 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I would ask sbrissen on original thread (this is a direct port) but I certainly haven't got it working yet....doh!
False alarm... Sorry. Need to enable extended desktop on power button long press. Just deinstalled LMT
One more question... Is there a way to add toggles in notification when using tablet UI?
Sent from my gt-n8020 using Tapatalk 4 Beta
Thank you thank you thank you, breathed new life into my aging n8020.
Sent from my gt-n8020 using xda app-developers app
Everything working sweet on this rom, had a few problems with 4.3 keyboard so reverted to this rom.
Big thanks
I have also already tried this ROM, right now it's occupied by my wife playing some games, but seems to work properly, big thanks, @smegg!
Hi, just wanna share that this rom has proven, in 2 days of usage, to be absolutely bug-free and smooth as butter. Not a single reboot or glitch until now. Great job porting this over! And I don't miss the TW enabled s pen apps either, there's replacement apps in the playstore, (ie. Lecturenotes, papyrus, floatnote, GMD spen control etc....)
Going to try the 10.2 Rom again now. Couldn't get the root (despite doing the seven taps thingy) going and had sdcard read/write problems, during my first try.
Sent from my gt-n8020 using xda app-developers app
rickyeo said:
Hi, just wanna share that this rom has proven, in 2 days of usage, to be absolutely bug-free and smooth as butter. Not a single reboot or glitch until now. Great job porting this over! And I don't miss the TW enabled s pen apps either, there's replacement apps in the playstore, (ie. Lecturenotes, papyrus, floatnote, GMD spen control etc....)
Going to try the 10.2 Rom again now. Couldn't get the root (despite doing the seven taps thingy) going and had sdcard read/write problems, during my first try.
Sent from my gt-n8020 using xda app-developers app
Click to expand...
Click to collapse
You're all very welcome, and I must say I found 10.2 a bit buggy too, but use this as my daily driver...thanks to sbrissen!
deleted
I have galaxy note 10.1 lte 4g with the official rom how can I install these one?
Thank you
AF1969 said:
I have galaxy note 10.1 lte 4g with the official rom how can I install these one?
Thank you
Click to expand...
Click to collapse
You need to root and install CWM first, then follow the instructions in the OP
Wich version of CWM
Wich version of CWM I have to install?
Thank you
DISCONTINUED: I discontinue this in favor of my OMNI-Build. CM is too broken at the moment for me (Graphic glitches as well as regular freezes). Also the FXP builds seem start to roll in. OMNI works fine for me and I will put out a new build tomorrow.
Threw a working CyanogenMod 11 build together. As the bundled CWM does not work, I replaced it with TWRP.
TRY AT YOUR OWN RISK!
EDIT: BE WARE, it seems that the GPU driver screws up and the tablet starts to hang under certain circumstances. I am working on it.
EDIT2: Seems it has nothing to do with the GPU drivers. ReInstalled and wiped and it worked fine the last few hours. Maybe its the GApps. Investigation still ongoing.
Working:
- HSDPA+ (I have no LTE capable card, so I cannot test LTE, but HSDPA+ works)
- Bluetooth
- WiFi
- GPS
- Camera
- Video
- Sound
- Hardware Acceleration
- Rotation
Not working:
- CWM (flashes broken) - replaced it with TWRP
- SELinux is set to permissive for now (otherwise data and cache do not mount)
- Nothing else found .. yet
Link:
cm-11-20131115-UNOFFICIAL-pollux
GApps
lowtraxx said:
Threw a working CyanogenMod 11 build together. As the bundled CWM does not work, I replaced it with TWRP.
TRY AT YOUR OWN RISK!
Working:
- HSDPA+ (I have no LTE capable card, so I cannot test LTE, but HSDPA+ works)
- Bluetooth
- WiFi
- GPS
- Camera
- Video
- Sound
- Hardware Acceleration
- Rotation
Not working:
- CWM (flashes broken) - replaced it with TWRP
- SELinux is set to permissive for now (otherwise data and cache do not mount)
- Nothing else found .. yet
Link:
cm-11-20131115-UNOFFICIAL-pollux
GApps
Click to expand...
Click to collapse
Is the UI switchable to Tablet UI?
Hi there,
update from my CM10.2 worked flawlessly.
@lowtraxx
would u mind to share your manifest file, so i can learn compiling my "own" cm and later at meow kernel?
THX
Chaos
It'd be great to have some love for the WiFi variants in these forums. Unfortunately I don't have a computer anymore otherwise I would add the device tree and build it myself.
LTE seems to be working
WythDryden said:
It'd be great to have some love for the WiFi variants in these forums. Unfortunately I don't have a computer anymore otherwise I would add the device tree and build it myself.
Click to expand...
Click to collapse
+1 for a sgp31x version
Inviato dal mio SGP311 con Tapatalk 4
hado a full wiperdwarechaos said:
Hi there,
update from my CM10.2 worked flawlessly.
@lowtraxx
would u mind to share your manifest file, so i can learn compiling my "own" cm and later at meow kernel?
THX
Chaos
Click to expand...
Click to collapse
Did you do a full wipe before update?
Hi
fokus said:
Did you do a full wipe before update?
Click to expand...
Click to collapse
nope. Always trying without wiping first. So far i cannot see any problems.
THX
Chaos
hardwarechaos said:
Hi
nope. Always trying without wiping first. So far i cannot see any problems.
THX
Chaos
Click to expand...
Click to collapse
Your risk - my fun! THX
BTW: Is it possible to OC the CPU?
Hi,
fokus said:
Your risk - my fun! THX
BTW: Is it possible to OC the CPU?
Click to expand...
Click to collapse
do not blame if this does nit work
Max CPU frequency in the settings is 1512MHZ. So i guess no OC.
THX
Chaos
Most tablet z users own the wifi version. I hope someone makes a Rom for the masses soon.
i got status 7 error while flashing rom using cwm 6.0.3.2
I have one with locked bootloader, just rooted, with not Cwm or twrp.
Will I be able to install this ROM if I installed twrp recovery? Or do I also need to unlock bootloader before flashing?
If yes what are the fastest way to do this.
What stock now
Sent from my HTC One using xda app-developers app
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-11
I looked @ the downloadpage, and there is a CM11 pollux_windy file included.
Anyone tested it? :cyclops:
I have installed CM11 on my old Galaxy S, and it runs so smooth, like never before.
zeus2602 said:
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-11
I looked @ the downloadpage, and there is a CM11 pollux_windy file included.
Anyone tested it? :cyclops:
I have installed CM11 on my old Galaxy S, and it runs so smooth, like never before.
Click to expand...
Click to collapse
Nice find man, im gonna give this a try as soon as it downloads been running cm 10.2 since i got my xtz so been looking forward to this!
Edit: so i flashed over my cm10.2 with cm11 and 4.4 gapps at first and then tried a clean flash of the boot img and installing from recovery. so far its not very stable at the moment for me on my pollux_windy, there is no sound but i keep hearing a clicking sound from the tablet, dalvik / art seems to be working but i was having the laggy issues opening the app drawer and unlocking the screen, it looks really nice so far and im enjoying the google launcher experience but i keep getting random hangs and then reboots at the moment. Just done a clean flash and giving art another try.
Edit 2: No such luck still kinda laggy and no sound but with the click noise repeating every few seconds, just flashed back to cm10.2 coz i need sound :s keep up the good work though guys, really looking forward to this rom!
sorry op not trying hijack thread..
here is 11.23 build i made for pollux_windy..but it is a boot image and system image..have to fastboot it.
cm11-pollux_windy-11.23: http://mfi.re/?b4v8r8g
So finally sound works ok?
pangiotis24 said:
So finally sound works ok?
Click to expand...
Click to collapse
yes
Sent from my XT1060 using xda app-developers app
skiwong20 said:
sorry op not trying hijack thread..
here is 11.23 build i made for pollux_windy..but it is a boot image and system image..have to fastboot it.
cm11-pollux_windy-11.23: http://mfi.re/?b4v8r8g
Click to expand...
Click to collapse
Your link doesn't work for me it just takes me to an account upgrade page for mediafire
Sent from my SGP311 using XDA Premium HD app
andymg350 said:
Your link doesn't work for me it just takes me to an account upgrade page for mediafire
Sent from my SGP311 using XDA Premium HD app
Click to expand...
Click to collapse
+1
The below information is obsolete. Please use the official obake version of CM12 for support on 2013 Droid devices.
A small patch I put together to make the new CM11 Ghost builds work (kinda) on the 2013 Droid Ultra series phones (Mini, Ultra, Maxx). It may also work for other Ghost based ROMs, but I haven't tested this.
So far, it's been lightly tested on the Droid Ultra M (Mini), and Droid Ultra Maxx. No guarantees, but it's been working okay so far for me.
Thanks to @an21281 for testing, and @mainbord for the original Droid Mini bins. Thanks also to the CM team for supporting us without even knowing it. =)
YOU ACCEPT RESPONSIBILITY FOR ALL RISKS BY CHOOSING TO USE THIS PATCH
- If it breaks your phone, you get to keep both halves. If it eats your data, not my problem. Etc, etc.
- If you are lazy or like to take shortcuts, definitely don't use this.
Requirements:
- Unlocked bootloader. Phone should be on newest stock bootloader, radio, etc. (4.4.4 currently)
- Philz recovery for ghost: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/ghost/
- CM11 Ghost: CM11 Ghost
- GApps. I use the PA Nano package: PA Gapps
Instructions:
- Boot to recovery, and wipe data and cache.
- Install CM11 Ghost, then GApps, then the patch
Notes:
- This is done in my free time, and isn't something I plan on supporting. If I have time, I may make updates.
- I'm not actually using CM11 on my phone at the moment, so can't test things currently.
- TWRP for ghost doesn't set the right properties. Go bug them.
- The huge "full" GApps packages can fill up /system and break ****.
Changelog:
0.6 - 4.4 bins
0.8 - 4.4.4 bins
** Please search the forum or Google your question before posting. Thanks! **
Thank you so much!!
Man, i kept trying to figure out how to rewrite the build.prop and change the binaries to be able to flash the ones that switched to the ghost source. I really, really, appreciate this patch. Maybe with the present state of BL unlock and the super cheap price on the maxx we will actually (for once) see a large amount of development for the msm8960dt branch and not just be limited to the ghost builds. thank you for this, again.
Thanks for taking the time to make this patch, everything has been working perfectly so far!
kitcostantino said:
Man, i kept trying to figure out how to rewrite the build.prop and change the binaries to be able to flash the ones that switched to the ghost source. I really, really, appreciate this patch. Maybe with the present state of BL unlock and the super cheap price on the maxx we will actually (for once) see a large amount of development for the msm8960dt branch and not just be limited to the ghost builds. thank you for this, again.
Click to expand...
Click to collapse
Glad to hear it's working for you.
At least as far as the Maxx goes, all the heavy lifting was done by the CM11 folks.
The patch for the maxx is one binary file for the button lights, two simple configs, and a few lines in build.prop.
I'll be curious if the patch works for the plain Ultra.
Rottgrub said:
Glad to hear it's working for you.
At least as far as the Maxx goes, all the heavy lifting was done by the CM11 folks.
The patch for the maxx is one binary file for the button lights, two simple configs, and a few lines in build.prop.
I'll be curious if the patch works for the plain Ultra.
Click to expand...
Click to collapse
Droid mini CM, keys and sound works!
This patch is going to be very useful if Lollipop is going to integrate the best of Motorola. This means I'll be able to flash CM ghost and still have native active display or whatever it is called in the Nexus 6. At that point, the customs ROMs will actually be relevant to the Moto X and Droid Maxx.
Sent from my iPad using Tapatalk
mainbord said:
Droid mini CM, keys and sound works!
Click to expand...
Click to collapse
Great! Thanks for getting the ball rolling! Guessing you figured out the camera problem you were having? (I was guessing maybe a gapps issue with the Google Camera?).
Problem with camera was in 19oct nightly, i installed 21 oct build and it works. Sorry for my english.
mainbord said:
Problem with camera was in 19oct nightly, i installed 21 oct build and it works. Sorry for my english.
Click to expand...
Click to collapse
Your English is fine. Thanks for the warning about that build date.
So when CM has a lollipop build (CM12?), we might be able to use this patch and have the Google version of Active (Ambient) Display? The only thing that keeps me from running CM is lack of a smooth working Active Display. This would be great news!
What happened to half of the pages in this thread
Sent from my XT1080 using Tapatalk
nubia11 said:
What happened to half of the pages in this thread
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I asked the mods to clean up the off topic posts. The posts removed were requests for information either already contained in the first post, or easily found with a quick Google search. Unfortunately, these sorts of posts contribute nothing to the discussion, and make it hard for readers to find actual data when/if they have problems.
That said, I'm glad people were able to help you out. Have you had any luck getting it working?
No. I'm not sure if I can use twrp ghost on my XT1080.... If so I will try it and let you / others
Sent from my XT1080 using Tapatalk
---------- Post added at 10:45 AM ---------- Previous post was at 10:44 AM ----------
nubia11 said:
No. I'm not sure if I can use twrp ghost on my XT1080.... If so I will try it and let you / others know
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Sent from my XT1080 using Tapatalk
It isn't working... Here is what I get... "This package is for device xt1056" also... Error executing updater binary in zip/sdcard/cmghost/cm-11 11 20141023-nightly..........and so on. Any ideas?
Sent from my XT1080 using Tapatalk
I'm just wondering if maybe I didn't flash something right. You would think that the patch would go first but I did exactly what was in the op
Sent from my XT1080 using Tapatalk
nubia11 said:
I'm just wondering if maybe I didn't flash something right. You would think that the patch would go first but I did exactly what was in the op
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Install Philz CWM recovery. Boot to recovery, and wipe data and cache.
Install CM11 Ghost, then GApps, and only then the patch.
Thank you
Sent from my XT1080 using Tapatalk
I'm getting flashing error
aneeshmbabu said:
I'm getting flashing error
Click to expand...
Click to collapse
Make sure you're using Philz recovery.
Sent from my XT1060 using Tapatalk
jakereeves31 said:
Make sure you're using Philz recovery.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I'm using twrp , how to flash philz recovery.. I already installed twrp.. Thanks for ur help , step wise help needed for flashing philz recovery.. My model xt1080,droid maxx