[Q] Samsung note N7000 URGENT feedbacks - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Guys I was updating a new update via wifi after which the phone restarted but after that it does not start... only the samsung logo glows and then nothing... From the forum I downloaded the firmware and odin as well.. restarted my phone in download mode but then something happend and i disconnected the phone form the pc... now the phone is not getting connected to the pc... the phone is still behaving the same... it goes into the download mode but then nothing after that,,, pls help

What where you updating? JB? If yes.. Then download philz kernel on pc and transfer it onto external sd. Put it to the phone and boot in to recovery mode. The flash the kernel using apply update. Once done. Boot into recovery again. Now wipe data. If you want to do any backup, do it before data wipe using backup and restore feature.

Related

[Q] [HELP] Bricked my SGS!

Totally bricked it.
- Unable to boot into recovery.
- ODIN doesn't detect my phone. (possible USB brick?)
- Screen stays stuck at SAMSUNG GALAXY S
Was trying to re-flash CM7, wiped data, reboot, doesn't work.
Tried booting back into recovery, no longer works.
Anyone has any idea? Bootable SD card doesn't work too.
I'm totally out of ideas.
mate did u try to go to download mode???
Download mode flash stock rom with pit 512 and repartition ticked ..
No download mode recovery jig of front page .
jje
how do i do it if ODIN doesn't read my phone anymore?
if you don't go into download mode; odin will not recognize your phone. otherwise, if you can't access download mode, you must use a JIG made of resistors. search the forum. or, if odin fails to detect your phone again, you must clean the contacts of the cable and the phone and the pc. again search the forum. if this fails, try a different cable or a different computer. and make sure that you have the necessary usb drivers installed.
Managed to restore my phone! THANKS A LOT!

Downgrade from Cyanogen 9 to Stock ROM.. Flashing Issue!

I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Biboltz said:
I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Click to expand...
Click to collapse
try to download and do not perform a backup
if didn't help try force download by :
pull out the battery
hold the power button+home+vol down
then insert the battery while holding " nedd some one assistance"
Biboltz said:
I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Click to expand...
Click to collapse
Hey
Try removing the battery a couple of minutes, then put it in Download Mode and flash. Run Odin as Administrator.
If it doesn't work, try removing the SIM and SD Card.
If not, try doing it very quickly. I exolain, it seems that if you let the phone connected during a lot of time it won't work with Odin. Put it in Download Mode connect it to the PC and flash.
If it still doesn't work, turn off the Firewall and Antivirus.
Finally, if not, download Odin 4.42:
http://www.mediafire.com/?s5b38cc3qeeaj19
and Odin 4.43:
https://rs305p6.rapidshare.com/files/2608670876/Odin_Multi_Downloader_v4.43.rar
Put the device in Download Mode, and try flashing with Odin 4.42, if it stucks at Setuo connection, close it and open Odin 4.43 and flash.
If not, sorry :
Hit the Thanks button if helped
Sent from my GT-S5830 using xda app-developers app
First u need to enter in recovery menu and wipe data/cache/dalvin
Then flash stock rom
When it's done, MUST enter in recovery menu again and wipe data and cache
Now it's work !
100% :silly:
Only after this flash custom recovery and restore backup !

s5570i won't boot, and can't be restored. not rooted

hello! I am trying to repair my sister's s5570i.
for some reason, it won't boot, and when I try to restore it, it works, but when i reboot it says - can't mount /datarebooting... and still nothing..
i tried to restore the stock rom with odin, but even after installing the drivers odin not recognizing the device in download mod so it's kinda useless...
the device never been rooted btw, so i can't understand why it's happening..
does anyone got any idea?
is it just a break?
thanks!
A
You sure you're in download mode?
Try recovery mode
Download Stock
Flash it via odin
Volume Down+Home+Power to go download mode

Help please My phone is dead

Ok so I was on the Vodafone release of the JB update, the phone became real laggy etc so I decided to see if there were any more releases of the JB update, I found Australia's LT6 so I switched off my phone.
I connected to ODIN on my laptop and put the MD5 file into the PDA and clicked start, It failed, so I tried again from scratch and it failed once more, Since then I have tried flashing A copy of the old Gingerbread stock rom. Still no avail.
I can access Download mode and when I enter recovery mode I get firmware upgrade encountered an issue please select recovery mode in Kies.
Kies does not register the device yet my laptop makes the sound when I connect it.
What do I do to save my phone!
Info; My phone is not rooted or on a custom ROM All stock.
JAG07 said:
Ok so I was on the Vodafone release of the JB update, the phone became real laggy etc so I decided to see if there were any more releases of the JB update, I found Australia's LT6 so I switched off my phone.
I connected to ODIN on my laptop and put the MD5 file into the PDA and clicked start, It failed, so I tried again from scratch and it failed once more, Since then I have tried flashing A copy of the old Gingerbread stock rom. Still no avail.
I can access Download mode and when I enter recovery mode I get firmware upgrade encountered an issue please select recovery mode in Kies.
Kies does not register the device yet my laptop makes the sound when I connect it.
What do I do to save my phone!
Info; My phone is not rooted or on a custom ROM All stock.
Click to expand...
Click to collapse
Flash the CM9 safe kernel in download mode using ODIN PC : here http://www.mediafire.com/?uhiges9y3zhs8oi and here http://forum.xda-developers.com/attachment.php?attachmentid=1068597&d=1337343150
Then, you will be able to boot into recovery by pressing Vol Up + Home + Power.
Recovery will give you access to USB mode, put a stock ROM or Small Pristine XXLT5 on your SD Card (internal or external).
Do a factory reset, wipe /system/, flash the ROM, and you will be good to go ! :good:
GeeckoDev said:
Flash the CM9 safe kernel in download mode using ODIN PC : here http://www.mediafire.com/?uhiges9y3zhs8oi and here http://forum.xda-developers.com/attachment.php?attachmentid=1068597&d=1337343150
Then, you will be able to boot into recovery by pressing Vol Up + Home + Power.
Recovery will give you access to USB mode, put a stock ROM or Small Pristine XXLT5 on your SD Card (internal or external).
Do a factory reset, wipe /system/, flash the ROM, and you will be good to go ! :good:
Click to expand...
Click to collapse
Why do I need to use a CM9 Kernal?
I don't want to have root.
Where do I put the Kernal in Odin?
First of all you should tell as exactly what error you got when installing XXLT5 in PC Odin.
Maybe make a snapshot of PC Odin window with the error.
Not start more actions with other ways to install a Rom before it's clear what happened. If you do not know it might get even uglier.

[Q] s3 mini bricked :(

Hi everybody, I have a problem. _.
I flashed on my s3mini cwm touch.
I wanted to start my phone but the screen is black, it does not indicate charging, my PC recognizes the phone is not the same as Odin.
In the recovery mode I can not, and the download does not mode.
So what can I do? :crying:
Sorry for my bad english , i´m from Germany
Lorick said:
Hi everybody, I have a problem. _.
I flashed on my s3mini cwm touch.
I wanted to start my phone but the screen is black, it does not indicate charging, my PC recognizes the phone is not the same as Odin.
In the recovery mode I can not, and the download does not mode.
So what can I do? :crying:
Sorry for my bad english , i´m from Germany
Click to expand...
Click to collapse
Put un download mode and reflash
ftheriau01 said:
Put un download mode and reflash
Click to expand...
Click to collapse
The 3 button combo does not work because the phone does not start.
That's why I can not get into the download mode
Jit
Search s 3 mini adb recovery.
Sent from my GT-I8190 using xda app-developers app
Which method did you use to flash it?
Is your battery loaded?
First you need to check if your battery is charged. If you have a friend with s3 mini try to charge your battery in his phone.
If the battery is charged, the phone should boot. The recovery doesn't affect the boot partition. If the phone doesn't boot you probably wrote something not ok in the boot partition. In this case only a JTAG can fix your phone.
When you flash the recovery from Odin the file you want to flash should be in the PDA box. If you put the recovery in the bootloader box, the recovery file will overwrite the bootloader and your phone won't boot any more. Odin doesn't test if the file is ok for that partition. This is called a hardbrick.
If you didn't touch the bootloader partition, the phone should boot and you should be able to get it into download mode at least. I don't think there is anything you can put in the PDA box to make your phone not boot.
Try flash the stock rom again, use odin it should work even if you're phone is off, remember you had to previously installed samsung kies on your pc/laptop so you're computer recognized your phone (that's simply basic)... I've seen the tys0n dude knows a lot too he's helped other guys good luck pal.

Categories

Resources