Database Develop

[Q] phone got stuck at galaxy s after update via kies

i updated my phone via kies and it got stuck at the galaxy s boot screen...
im able to enter download mode,but even after flashing the phone with the firmware i get an error in recovery saying 'unable to prepare storage, use ui menu for format and reboot'...
what do i do??? somebody please help

use buttuns Vol UP+Home+Power on/off
join recovery mode
wipe cache
Factory/data reset
. then again into download mode
make sure Kies isnot running / use to pc CTR+ALT+DEL and check about it
before plug in phone
run Odin v X.X loads 3 files from ur rom wanted to flash (becarfur if u wanna go to 2.3.3 and u never been before u must download rom with bootloader , check Ramads Post in General section )
try those and after post again what going on

Ok thanks...I'll try it as soon as possible and give you the feedback
Sent from my GT-I5800 using Tapatalk

if u cant access recovery mode, pull out the battery wait for 1 min or so
than hold the volume up+home button and insert the battery...
than apply Factory/data reset

Iflashed the phone with the 2.1 firmware ddjg4...
The phone worked...
After that I flashed 2.2 rom ddjp6...but when the phone booted all the apps started to force close...what should I do to get 2.2 on my phone?? Have I done anything wrong? Should I use a different firmware?? Pls help
Sent from my GT-I5800 using Tapatalk

Flash with repartition and pit
Sent from Miui powered SGS

i tried flashing with repartition and pit but still all the apps are force closing... by apps i mean the apps which come preloaded on the phone

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.

dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium

RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?

dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.

Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!

bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.

dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).

Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this

Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app

Why will it be hardbricked if the custom roms are based on s5830i stock roms?

But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium

Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .

Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

[Q] Need help with Jelly Bean Rom

Hi,
I have Galaxy Note with 4.0.3 rooted already. I tried to installed the Ultimate JB v5.1 from this thread
http://forum.xda-developers.com/showthread.php?t=1970626
Now I am having a problem. The Philz Touch 3 seems working now, but when I am trying to flash the rom. There is absolutely no progress BAR!
After 5-10 minutes the phone reboot itself. Then the JB rom was not installed. It stuck at a screen displays Installing applications.....
It will be like that forever.
and I can't go back to 4.0.3. I did not backup....
It seems like the OLD ICS is still on my phone but I can not enter the system. It says Installing Applications forever. Then if I connect a usb,
I actually can goto Setting, then I see the phone is still on 4.0.3.
Seems like I only partially wiped out the old ICS? I could not see the internalsd from my PC after connect the USB.
I have also formatted EMMC... am I screwed?
Is there a way to save the phone?
Please help.
Many many thanks
Tony

Are you able to go into download mode? If yes then flash a stock ics through pc odin. This should boot up your phone normally

nokiamodeln91 said:
Are you able to go into download mode? If yes then flash a stock ics through pc odin. This should boot up your phone normally
Click to expand...
Click to collapse
Thanks for replying, I think I am able to Reboot Download from Philz Touch 3. I will certainly try that.
Currently it seems like I still have old system remained in my phone but partially. That might be why I could not boot.
I will try that option.
Thanks
Tony

Yes, there is; your phone boots so all is still well. Download odin, and put your phone into download mode (volume up + home + power; pressed at tge sane time it will automagically reboot and only when you see the galaxy note icon you release these buttons. Now also download a stock pre-rooted GINGERBREAD rom and glash this rom via odin, there will be 3 things to flash; csc, phone and if I remember corrrectly also modem. Now just let it boot and you will be safe again. Now you can experiment again....

hom.hom said:
Yes, there is; your phone boots so all is still well. Download odin, and put your phone into download mode (volume up + home + power; pressed at tge sane time it will automagically reboot and only when you see the galaxy note icon you release these buttons. Now also download a stock pre-rooted GINGERBREAD rom and glash this rom via odin, there will be 3 things to flash; csc, phone and if I remember corrrectly also modem. Now just let it boot and you will be safe again. Now you can experiment again....
Click to expand...
Click to collapse
Thank you so much!. I will try that.:good::good:
Tony

[Q] After rooting phone is not starting, please help...

Hi,
I have Samsung Galaxy S I9000 running Ginger Bread.
I wanted to upgrade my phone to Ice Cream Sandwitch or Jelly Beans. In order to do it, I started with below steps to root my mobile.
1. Installed latest Clockwise Mode application into my phone.
2. Installed Odin3 v1.7 in my laptop.
3. Downloaded CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar on my laptop.
4. Started Odin first.
5. Disconnected mobile and started in download mode with Volume Down + Home Button + Power Key.
5. After starting the download mode, connected mobile to laptop using the USB.
6. Keep all the default values in Odin3 i.e. Re-Partition option unchecked, Auto Reboot and F-Reset Time option enabled. Selected tar file CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar in PDA option.
7. Connected mobile and it detected ID Comm [Highlighted in Yellow].
8. Finally click on Start button.
After starting the process was completed and Yellow color changed to Green one, phone was auto reboot.
But after reboot it is just stuck on start of screen and not going ahead. I wait for 2 hours but still not working.
Could you please help me how I can solve this issue now?

Did you try to pull battery out and restart the phone again?
Do you still can go in CWM with 3 button combo again?
If yes then try to flash a ICS or JB kernel (depending on what ROM you finally want to have on your phone) via CWM and then go in advanced and restart recovery (if available), otherwise just try to flash the rom.zip on top.
If CWM is not possible, the go in download mode an falsh a tar version of kernel via ODIN.
Here are different semaphore kernels for each android version:
http://78.46.194.137/downloads/gt-i9000-ics
http://www.semaphore.gr/downloads/gt-i9000-jb
For ics it should work after 1. flash, but for JB you have to flash it 2 or even 3 times, if after restart phone does not boot. Then battery out again, start in recovery and flash zip again.
Good luck and good success .

I think, at this position, installing a new gingerbread stock ROM will be preferable. Try installing XXJVU. Then root with cwm and install any slim bean version in case you are interested to use jelly bean.
Sent from my GT-I9000 using xda app-developers app

Sure that will be the best way....but my suggestions do not take much time, so why not give them a try .
But if its not going, then a restock is the best you are right:
What I always do for restock is using slappys rescue kit.
Unzip it and flash the Rom via Odin. There is everything, also a txt file with a guide included.
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
If you want to have slim rom then its recommended to flash CM9 first or flash a modem afterwards via cvm, because slim does not have a modem included.
And/Or just follow the installation guides/recommendations from the single ROM Threads.

Thanks Guys for your help.
My issue is resolved with below post.
http://forum.xda-developers.com/showthread.php?t=1809098

phone not starting
guys i cant start my phone....even the three buttons ar not working...it is just loading and loading....help please
model-gt-s5830i

viral1999 said:
guys i cant start my phone....even the three buttons ar not working...it is just loading and loading....help please
model-gt-s5830i
Click to expand...
Click to collapse
You are here in totally wrong section: this is a i9000 help thread section. Hopefully you didn't flash a i9000 rom, otherwise your phone is hard bricked.
tetakpatalked from Nexus 7 flo

Me 2: It was from low battery in my case
I had similar problem when rooting my Samsung Galaxy S5 smartphone with Odin3. After rooting with a success message my phone was showing just the Samsung Logo each time I was trying to turn it on without loading OS. I googled and directed here and connected my phone to the charger as its mentioned in a link you provided which solved your problem. It turned on automatically after a few minutes while of charging and when turned on it was charged approximately 40%.
As I was very afraid my phone got serious harm at first I hope this maybe a sedative probability for duds really worry about what happened to their smartphone.

I rooted my phone le tv without pc bt after rooting it is not starting pls help me how to start my mobile again

Imbhavya said:
I rooted my phone le tv without pc bt after rooting it is not starting pls help me how to start my mobile again
Click to expand...
Click to collapse
What exactly did you do, which phone model and what does it display now?
Sent from my A0001 using Tapatalk

Odin SetupCOnnection problem.

I've Tried to install rom but my phone is stucked at boot scrren. so i've tried to flash frimware with odin but its stuck at setupconnection.
p.s: i'm pretty sure that the phone is on download mode.

hahayouaredead said:
I've Tried to install rom but my phone is stucked at boot scrren. so i've tried to flash frimware with odin but its stuck at setupconnection.
p.s: i'm pretty sure that the phone is on download mode.
Click to expand...
Click to collapse
but did you flash the fw yet?
After flash a stock fw boor into stock recovery and do wipe data/factory reset and wipe cache

Viper The Ripper said:
but did you flash the fw yet?
After flash a stock fw boor into stock recovery and do wipe data/factory reset and wipe cache
Click to expand...
Click to collapse
no i did not flash the fw,actualy i can't. i tried to but odin stuck at SetupConnection, its happens on both pc. and there's one more thing i cant reach to recovery now.
the phone stucks at the opening screen. even doesn't boot.
if you help me about this that would be life saver. thanks for your answer btw. :laugh::good:

hahayouaredead said:
no i did not flash the fw,actualy i can't. i tried to but odin stuck at SetupConnection, its happens on both pc. and there's one more thing i cant reach to recovery now.
the phone stucks at the opening screen. even doesn't boot.
if you help me about this that would be life saver. thanks for your answer btw. :laugh::good:
Click to expand...
Click to collapse
Are you using the correct firmware from Sammobile for your Galaxy Ace GT-S5830?
You can try the following steps:
1. Remove the battery (be sure it is fully charged!!), wait 5 mintes, put it back and retry the flash
2. Try reinstalling drivers, uninstall Kies.
3. Use a different usb port/cable from your firends (If they have a Galaxy Ace)
4. Install drivers and use a different pc.
or Supermini's guide :
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery and connect your galaxy ace to the computer;
Step 3 -- Insert battery holding Volume down + Power + Home
Step 4 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 5 – Click Start button in Odin and wait about 5 min.
Click to expand...
Click to collapse
Good luck mate!

always choose correct rom and the problem might be with your usb cable or usb slot or drivers always install latest drivers
i also had this problem of my phone not being detected in odin but drivers helped so you should try
HIT THANKS COS IT WONT HURT