Related
I installed ICS on my XPERIA X8 and it freezes at boot. And I cannot go to recovery mode, where is my backup. I know I need to use FlashTool but I don't know how to use it, because it says:
03/021/2012 15:21:18 - INFO - <- This level is successfully initialized
03/021/2012 15:21:18 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
03/021/2012 15:21:18 - INFO - You can drag and drop ftf files here to start flashing them
03/021/2012 15:21:26 - INFO - Device disconnected
03/021/2012 15:21:38 - INFO - Device connected with USB debugging off
03/021/2012 15:21:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/021/2012 15:21:49 - INFO - Please connect your device into flashmode.
03/021/2012 15:21:53 - INFO - Device disconnected
And I cannot flash the original image.
Hot to connect the phone?
With " Press and hold back button then plug in the usb cable"?
Now I can flash it but it isn't reboot just say device disconnected, then device connected in flash mode, then device disconnected, then flashing aborted
nearly the same problem here trying to unlock the bootloader on my E15i.
Would appreciate if anyone has a suggestion how to overcome this.Thanks
Try this
kowwi0515 said:
I installed ICS on my XPERIA X8 and it freezes at boot. And I cannot go to recovery mode, where is my backup. I know I need to use FlashTool but I don't know how to use it, because it says:
03/021/2012 15:21:18 - INFO - <- This level is successfully initialized
03/021/2012 15:21:18 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
03/021/2012 15:21:18 - INFO - You can drag and drop ftf files here to start flashing them
03/021/2012 15:21:26 - INFO - Device disconnected
03/021/2012 15:21:38 - INFO - Device connected with USB debugging off
03/021/2012 15:21:38 - INFO - For 2011 devices line, be sure you are not in MTP mode
03/021/2012 15:21:49 - INFO - Please connect your device into flashmode.
03/021/2012 15:21:53 - INFO - Device disconnected
And I cannot flash the original image.
Hot to connect the phone?
With " Press and hold back button then plug in the usb cable"?
Now I can flash it but it isn't reboot just say device disconnected, then device connected in flash mode, then device disconnected, then flashing aborted
Click to expand...
Click to collapse
IF you have stock ROM for X8, you can flash with flash tool..
the first, hold volume down in your phone and plug usb kabel to computer..
see your phone have green light, its flash mode.. )
and then go to flash tool, and all its works..
.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
Dheny Brightside said:
IF you have stock ROM for X8, you can flash with flash tool..
the first, hold volume down in your phone and plug usb kabel to computer..
see your phone have green light, its flash mode.. )
and then go to flash tool, and all its works..
Click to expand...
Click to collapse
What?! First of all - not volume down but BACK button.
In flashtool directory You will have drivers folder. Install those drivers. Then reboot Your PC. Copy Your firmware package into firmwares in flashtool directory (.ftf files). Than run flashtool, click on flash, choose the package, click ok, flashtool will aks You to connect Your phone in flash mode. Plug USB cable into PC. Plug in USB cable into phone and while doing this You must hold back button. And flashtool should recognize Your device and start flashing.
Bolussimo said:
What?! First of all - not volume down but BACK button.
You must hold back button.
Click to expand...
Click to collapse
Thank you! You saved my phone's life!
I'm trying GingerDX now, and I making an ''XPERIA X8 MEGAPACK''
Anyway, I do not know why this is:
When I first installed gingerDX i have installed many apps. And when I'll removed this backup, and I installed this rom again, the phone freezes at the boot screen.
(I know how to do it. I flashed the stock rom from my backup, and It is working. But I cannot make a backup from this rom
Because You should do a full wipe When You install ROM again there are some files from old one. And this may cause boot problem
Hi, I've tried this but it doesn't work. My phone just keeps rebooting itself after SE logo animation is done. What can i do?
maretodoric said:
Hi, I've tried this but it doesn't work. My phone just keeps rebooting itself after SE logo animation is done. What can i do?
Click to expand...
Click to collapse
Boot loop...
Send from Brightside Room
Bolussimo said:
Because You should do a full wipe When You install ROM again there are some files from old one. And this may cause boot problem
Click to expand...
Click to collapse
I tried it but it isn't working =(
Boot prroblem ICS
I've tried ICS for stock kernel, but it isn't boot! But i want to try it!
Dude... just flash a stock SE rom via Flashtool and its done
Sent from my Nexus S using XDA Premium
Generally speaking, bootloops imply you are missing the x15 Baseband required for custom ROMs to work: Follow the mediafire link in B.Jay's profile and find the x15 Baseband corresponding to your X8 version (It's in the sticker under the battery)... Hope this helps.
EDIT: Update your FlashTool Version!!!! http://androxyde.github.com/Flashtool/
Hi guys, i don't know what happened but since the last time i flashed kernel, i can't boot to flashmode anymore.. I'm using nAa ICS 2 kernel and MiniCM9 3.0.1 by nAa.. I want to flash to nAa-ics-3 and then update to 3.0.2 but can't boot my phone to flashmode.. It just doesn't respond while I'm holding the back button.. Tried installing the LATEST version of flashtool, tried removing and reinstalling usb drivers, rebooting pc several times but nothing helps.
Flash tool just says that the phone is connected but usb debugging is off.. But when i boot it back into normal state, debugging is on, kernel and software is recognized and everything is working as it should..
Had the same problem using the latest version of FlashTool!
I then tried v 0.6.9.1 and it worked flawlessly, so try this version!
Still nothing.. Here's the output from the FlashTool
Code:
27/038/2012 13:38:07 - INFO - <- This level is successfully initialized
27/038/2012 13:38:07 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:22:19
27/038/2012 13:38:07 - INFO - You can drag and drop ftf files here to start flashing them
27/038/2012 13:38:12 - INFO - Device connected with USB debugging on
27/038/2012 13:38:12 - INFO - Connected device : E15
27/038/2012 13:38:13 - INFO - Installed version of busybox : BusyBox v1.19.4-cm9 bionic (2012-03-17 17:50 +0100) multi-call binary.
27/038/2012 13:38:13 - INFO - Android version : 4.0.4 / kernel version : 2.6.29.6-nAa-ics-02
27/038/2012 13:38:13 - INFO - Root Access Allowed
27/038/2012 13:38:55 - INFO - Selected E15_nAa-ics-03_2.6.29.6-nAa-ics-03.ftf
27/038/2012 13:38:55 - INFO - Preparing files for flashing
27/038/2012 13:38:55 - INFO - Please connect your device into flashmode.
27/039/2012 13:39:01 - INFO - Device disconnected
27/040/2012 13:40:57 - INFO - Device connected with USB debugging off
27/040/2012 13:40:57 - INFO - For 2011 devices line, be sure you are not in MTP mode
I just can't figure it out.. :/
1 disconnect your device
2 in flashtool click on the flash icon -> flashmode -> select what you want to flash -> click ok
3 flashtool will say you to connect the phone while holding down the back key. do it
you need to connect the phone after flashtool says so, not before (according to the log, you connected the phone and then choosed file to flash)
Put on the stock rom (the one we get from the Sony) or backup u have of your stock rom.. then try to flash it..
You can get stock rom by using PC companion and update o repair or a ftf file from our own XDA...:thumbup:
fifo171 said:
1 disconnect your device
2 in flashtool click on the flash icon -> flashmode -> select what you want to flash -> click ok
3 flashtool will say you to connect the phone while holding down the back key. do it
you need to connect the phone after flashtool says so, not before (according to the log, you connected the phone and then choosed file to flash)
Click to expand...
Click to collapse
Still doesn't work.. I'm holding the back button while the phone is off and while I'm connecting the charger.. And still won't boot to flashmode.. And, as soon as i let go of the back button, the phone starts charging itself..
@sidhart
I'll try that on a weekend.. Now I'm afraid not to brick it xD i need it for work during the week.. If i brick it on a weekend, i will be able to buy a new one on time.. :/
Is your phone recognized by the PCC when you connect it?
Sent from my W8
Same thing happened with me the debugging was not detected when I first tried to unlock bootloader so I went back to the W8 stock rom and then it worked properly...
Try it only when there is no other way out...
Sent from my W8
Use SUES to revert back to stock rom/kernel and reflash from there. Also had this problem a few months back changing kernels.
With nAa and Alfs for cm7 kernels u dont have to hold back button it boots to flash mode automaticly when powered off and u plug the cable.
@sidhart The phone is recognized by PCC but as X10 not X8 xDDD So I'm afaid to revert to stock flash/kernel over PCC..
@Pipi14 I'm using nAa ICS kernel ( 02 ) for CM9, you think it might be the same?
maretodoric said:
@sidhart The phone is recognized by PCC but as X10 not X8 xDDD So I'm afaid to revert to stock flash/kernel over PCC..
@Pipi14 I'm using nAa ICS kernel ( 02 ) for CM9, you think it might be the same?
Click to expand...
Click to collapse
Try reinstaling the rom cm9 using cwm then it might work properly..
Dont forget factory reset and wipe data cache..
Reply me if you try it...
Sent from my W8
Yeah i have used nAa kernel from the beginning and all his kernels automaticly boot in to flashmode when turned off and plugging the cable. I used MiniCm9 3.0.2 for two days reverted back to MiniCm7 2.2.0 cuz Its kinda slow for me still. But maybe next release of MiniCm9 will be my daily rom.
Hit thanx if i helped.
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
maretodoric said:
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
Click to expand...
Click to collapse
Yaaaay
Click THANKS if I helped.
And if your generous donate to me please
Sent from my X8
maretodoric said:
Still doesn't work.. I'm holding the back button while the phone is off and while I'm connecting the charger.. And still won't boot to flashmode.. And, as soon as i let go of the back button, the phone starts charging itself..
:/
Click to expand...
Click to collapse
WORKED For Me in Xperia Pro with Official ICS.
Many Thanks
- Nazmul
pipi14 said:
Yeah i have used nAa kernel from the beginning and all his kernels automaticly boot in to flashmode when turned off and plugging the cable. I used MiniCm9 3.0.2 for two days reverted back to MiniCm7 2.2.0 cuz Its kinda slow for me still. But maybe next release of MiniCm9 will be my daily rom.
Hit thanx if i helped.
Click to expand...
Click to collapse
i have same problem like maretodoric..but my phone still can't boot to flashmode without holding back button or holding back button..any solution
my karnel nAa-ics-02 and my rom miniCM9 3.0.5
here the log flashtool :
Code:
02/022/2013 01:22:56 - INFO - <- This level is successfully initialized
02/022/2013 01:22:56 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
02/022/2013 01:22:56 - INFO - You can drag and drop ftf files here to start flashing them
02/023/2013 01:23:03 - INFO - Device connected with USB debugging on
02/023/2013 01:23:04 - INFO - Connected device : E15
02/023/2013 01:23:04 - INFO - Installed version of busybox : BusyBox v1.20.2-cm9 bionic (2012-07-14 01:52 +0200) multi-call binary.
02/023/2013 01:23:04 - INFO - Android version : 4.0.4 / kernel version : 2.6.29.6-nAa-ics-02 / Build number : IMM76L
02/023/2013 01:23:05 - INFO - Root Access Allowed
02/023/2013 01:23:44 - INFO - Selected E15_2.6.32.60-nAa-03.ftf
02/023/2013 01:23:44 - INFO - Preparing files for flashing
02/023/2013 01:23:45 - INFO - Please connect your device into flashmode.
02/023/2013 01:23:57 - INFO - Device disconnected
02/024/2013 01:24:13 - INFO - Device connected with USB debugging off
02/024/2013 01:24:13 - INFO - For 2011 devices line, be sure you are not in MTP mode
maretodoric said:
OMG i didn't knew this.. It did work I've flashed the new kernel sucessfully Thanks a lot
Click to expand...
Click to collapse
hey maretodoric..tell me how u boot to flash mode pleasee..step by step
Can't you read?
02/024/2013 01:24:13 - INFO - Device connected with USB debugging off
Click to expand...
Click to collapse
I'm not even gonna bother posting any more info as you've now enough ammo to search the forum and find the solution yourself.
Give a man a fish....
I am newbie,but i have decent knowledge
i can follow instructions,i'm not stupid
I have xperia V
i found this here on xda -----> [DEC 06][ROM Z1][UB/LB] ★ Pure-X-Blaster™ - 14.1G.2.257 ★ |> Links Updated <|
when i opened it i came across this
instructions says that this is recomended kernel so i opened it --------> [KERNEL][V] NK for Xperia™ V | 1.4.0 [20 NOV]
then i followed this instructions :
Copy to sdcard
Flash the .zip via any recovery . . . I flashed it via cwm
after instalation i turned off phone and tried to turn it on again and it can't turn on
my phone just vibrate for a moment and that's all,and indicator doesn't blink
I'm really scared that my phone is dead now . . . what it could be ?
sorry for bad english
drn57 said:
I am newbie,but i have decent knowledge
i can follow instructions,i'm not stupid
I have xperia V
i found this here on xda -----> [DEC 06][ROM Z1][UB/LB] ★ Pure-X-Blaster™ - 14.1G.2.257 ★ |> Links Updated <|
when i opened it i came across this
instructions says that this is recomended kernel so i opened it --------> [KERNEL][V] NK for Xperia™ V | 1.4.0 [20 NOV]
then i followed this instructions :
Copy to sdcard
Flash the .zip via any recovery . . . I flashed it via cwm
after instalation i turned off phone and tried to turn it on again and it can't turn on
my phone just vibrate for a moment and that's all,and indicator doesn't blink
I'm really scared that my phone is dead now . . . what it could be ?
sorry for bad english
Click to expand...
Click to collapse
Dont worry, your phone is still alive. Probable reason why your phone is dead now is because you have a lock bootloader. (those custom kernels are for unlock bootloader only). Just download Flashtool and Xperia V Official FTF File then flash it. Please search general section for detailed instruction of recovering dead phone,
I have the same problem, i used the market app for flashing IMG files and guess what after flashing TWP.img for recovery the application prompted me to restart and that was it, phone is not powering on completely, no lights , nothing. when i connect to the computer it is recognized as Zeus device. Flashtool cannot detect it at all
Need serious help
you can flash back stock kernel via flashtool, just press volume up and plug in your usb and you will have a blue light indicating that your phone is connected in flash mode. then select your kernel and flash it.
davidtkf88 said:
you can flash back stock kernel via flashtool, just press volume up and plug in your usb and you will have a blue light indicating that your phone is connected in flash mode. then select your kernel and flash it.
Click to expand...
Click to collapse
when i hold vol up button and plug it via usb i get blue light but it doesn't liight all the time
it turns of by itself after 20 seconds
same thing all the time
17/040/2013 22:40:10 - INFO - Selected Xperia V / 9.1.A.1.140 / 1270-9887_R1I_CE
17/040/2013 22:40:10 - INFO - Preparing files for flashing
and my phone turns of
i mean blue light dissapear
drn57 said:
when i hold vol up button and plug it via usb i get blue light but it doesn't liight all the time
it turns of by itself after 20 seconds
same thing all the time
17/040/2013 22:40:10 - INFO - Selected Xperia V / 9.1.A.1.140 / 1270-9887_R1I_CE
17/040/2013 22:40:10 - INFO - Preparing files for flashing
and my phone turns of
i mean blue light dissapear
Click to expand...
Click to collapse
blue light disappear meaning your phone have disconnect from your computer, do you install your fastboot driver? cause if have, usually the disconnection problem will go away..also pls take note, fastboot and flashmode is 2 different mode..fastboot for flashing kernel, and flashmode for flashing firmware using ftf file. if you cannot flash kernel, then you can flash back stock firmware using flashmode..
davidtkf88 said:
blue light disappear meaning your phone have disconnect from your computer, do you install your fastboot driver? cause if have, usually the disconnection problem will go away..also pls take note, fastboot and flashmode is 2 different mode..fastboot for flashing kernel, and flashmode for flashing firmware using ftf file. if you cannot flash kernel, then you can flash back stock firmware using flashmode..
Click to expand...
Click to collapse
Sorry dude,i meant green light
I have stock firmware in flashtool
and when i click OK it says :
18/002/2013 12:02:10 - INFO - <- This level is successfully initialized
18/002/2013 12:02:10 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
18/002/2013 12:02:15 - INFO - Device disconnected
18/002/2013 12:02:21 - INFO - Selected Xperia V / 9.1.A.1.140 / 1270-9887_R1I_CE
18/002/2013 12:02:21 - INFO - Preparing files for flashing
and when window with guide comes up,when i hold VOL- green light shows but nothing happens,after few seconds the light comes off again
drn57 said:
Sorry dude,i meant green light
I have stock firmware in flashtool
and when i click OK it says :
18/002/2013 12:02:10 - INFO - <- This level is successfully initialized
18/002/2013 12:02:10 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
18/002/2013 12:02:15 - INFO - Device disconnected
18/002/2013 12:02:21 - INFO - Selected Xperia V / 9.1.A.1.140 / 1270-9887_R1I_CE
18/002/2013 12:02:21 - INFO - Preparing files for flashing
and when window with guide comes up,when i hold VOL- green light shows but nothing happens,after few seconds the light comes off again
Click to expand...
Click to collapse
to properly flash back your stock firmware using flashtool and ftf files,
step 1 - you have to take out your battery leave it for few sec, then put back in, and don't turn on your phone,
step 2 - in its off state, press volume down and while still pressing the volume button, you plug in your usb cable, green light will grow meaning your phone connected in flashmode.
step 3 - select your stock ftf firmware then flash it, when the windows with guide comes on, don't do anything, just let it do its job..
usually the phone will disconnect at opening device r/w operation, and the phone will boot it self, don't close flashtool yet, follow step 1-3 again until flashing operating begin..
davidtkf88 said:
to properly flash back your stock firmware using flashtool and ftf files,
step 1 - you have to take out your battery leave it for few sec, then put back in, and don't turn on your phone,
step 2 - in its off state, press volume down and while still pressing the volume button, you plug in your usb cable, green light will grow meaning your phone connected in flashmode.
step 3 - select your stock ftf firmware then flash it, when the windows with guide comes on, don't do anything, just let it do its job..
usually the phone will disconnect at opening device r/w operation, and the phone will boot it self, don't close flashtool yet, follow step 1-3 again until flashing operating begin..
Click to expand...
Click to collapse
I took battery for a few sec and put it back in,
i did it like you said,i held volume down and i plugged usb,green light showed,i selected stock frf and when i clicked on ok again same problem,nothing happens . . . . Here is screenshot ------------> http://pokit.org/get/?979d90600d48befb98f9db9bc3daab60.jpg
and one more thing,when i connect it in flashmode i get this pop up message --------> http://pokit.org/get/?f3b43dbbad0e64f055a18c9d5c4e5eed.jpg
and after few seconds green light turns of until i again hold volume down,and again same pop up mesaage,and again green light turns off. . .
drn57 said:
I took battery for a few sec and put it back in,
i did it like you said,i held volume down and i plugged usb,green light showed,i selected stock frf and when i clicked on ok again same problem,nothing happens . . . . Here is screenshot ------------> http://pokit.org/get/?979d90600d48befb98f9db9bc3daab60.jpg
and one more thing,when i connect it in flashmode i get this pop up message --------> http://pokit.org/get/?f3b43dbbad0e64f055a18c9d5c4e5eed.jpg
and after few seconds green light turns of until i again hold volume down,and again same pop up mesaage,and again green light turns off. . .
Click to expand...
Click to collapse
now i know why your phone always disconnect with your computer, the problem lie with either your usb port on computer, or the cable you use for connection, if your computer cannot identify your phone, then you will have the cannot identify message pop up, and your phone reboot itself..so you have to make sure your computer identify the phone and install the require driver, just then you can start flashing..i recon you try using other computer or original cable from sony..see if that help..
davidtkf88 said:
now i know why your phone always disconnect with your computer, the problem lie with either your usb port on computer, or the cable you use for connection, if your computer cannot identify your phone, then you will have the cannot identify message pop up, and your phone reboot itself..so you have to make sure your computer identify the phone and install the require driver, just then you can start flashing..i recon you try using other computer or original cable from sony..see if that help..
Click to expand...
Click to collapse
I don't understand,i had same problem few weeks ago on windows 8
And i just opened flashtool and flashed tft with vol- and plugging usb
Now on windows 8.1 nothing happens
Can u tell me which drivers are required.?
and i am usin original cable from sony which i got with phone when i bought it
davidtkf88 said:
now i know why your phone always disconnect with your computer, the problem lie with either your usb port on computer, or the cable you use for connection, if your computer cannot identify your phone, then you will have the cannot identify message pop up, and your phone reboot itself..so you have to make sure your computer identify the phone and install the require driver, just then you can start flashing..i recon you try using other computer or original cable from sony..see if that help..
Click to expand...
Click to collapse
I tried on my old pc
Win XP
When window comes up and tells me to hold vol- and plug it,i do it
but i get error in flashtol "Drivers need to be instaled,you can find them in flashtool folder." or something like that
i go to flashtool,instal drivers but again i get same message . . .
On my new pc on Windows 8.1 When windows comes up and tells me to plug it with vol- nothing happens after i plug it . . .
I get green light,but it turns off after 10 seconds or less . . . Windows still showing guide to connect it in flashmode . . .
drn57 said:
I tried on my old pc
Win XP
When window comes up and tells me to hold vol- and plug it,i do it
but i get error in flashtol "Drivers need to be instaled,you can find them in flashtool folder." or something like that
i go to flashtool,instal drivers but again i get same message . . .
On my new pc on Windows 8.1 When windows comes up and tells me to plug it with vol- nothing happens after i plug it . . .
I get green light,but it turns off after 10 seconds or less . . . Windows still showing guide to connect it in flashmode . . .
Click to expand...
Click to collapse
that because on win 8.1 there is a problem with the usb port where microsoft has changed their usb policies, the changes cause our phone unable to connect by fashboot, or flashmode, and that mostly referring to usb 2.0 port..you will not encounter this with win7 or win8, under xp you will need to install your s1 boot driver manually, so best for you to use a win7 or win8..
also, if your win 8.1 have a usb 3.0 port that uses intel, amd, nec, etc, chips, and is running driver provided by vendor, you can try using those usb 3.0 port, as long as you are not running microsoft driver..
davidtkf88 said:
that because on win 8.1 there is a problem with the usb port where microsoft has changed their usb policies, the changes cause our phone unable to connect by fashboot, or flashmode, and that mostly referring to usb 2.0 port..you will not encounter this with win7 or win8, under xp you will need to install your s1 boot driver manually, so best for you to use a win7 or win8..
also, if your win 8.1 have a usb 3.0 port that uses intel, amd, nec, etc, chips, and is running driver provided by vendor, you can try using those usb 3.0 port, as long as you are not running microsoft driver..
Click to expand...
Click to collapse
I tried on winows 8
I installed drivers from flashtool folder on win 8 and when i connect phone with vol- i get green light
guide window dissappears and flashing stops with message in log " Drivers need to be instaled,you can find them in flashtool folder" . . .
On windows XP same,it tells me that drivers need to be installed but I instaled them . . .
davidtkf88 said:
that because on win 8.1 there is a problem with the usb port where microsoft has changed their usb policies, the changes cause our phone unable to connect by fashboot, or flashmode, and that mostly referring to usb 2.0 port..you will not encounter this with win7 or win8, under xp you will need to install your s1 boot driver manually, so best for you to use a win7 or win8..
also, if your win 8.1 have a usb 3.0 port that uses intel, amd, nec, etc, chips, and is running driver provided by vendor, you can try using those usb 3.0 port, as long as you are not running microsoft driver..
Click to expand...
Click to collapse
DUUUUUDE
AFTER 9 DAYS I DID IT FINALLY
I UNBRICKED MY LOVE
Win 8
Win XP
Win 8.1 couldn't recognize my phone in flashtool
My last hope was Windows 7
I tried to flash my stock kernel and i have got error : 22/009/2013 20:09:07 - ERROR - 31: A device connected to the system is not in operation.
22/009/2013 20:09:07 - ERROR - Error flashing. Aborted
Same error few times
I pulled my battery out and i tried again and flashing finished successfully
but I couldn't turn my phone anyways
I plug it in pc and i got red led
after few minutes SONY logo appeared by itself for a few seconds,i didn't do anything . . .
so i thought it's because of low batery
Then i plugged my phone into wall socket and after few minutes phone turned of by itself . . .
Now everything works perfect . . .
Thank you all for your help,and your answers
you guys are my heroes
have fun
drn57 said:
DUUUUUDE
AFTER 9 DAYS I DID IT FINALLY
I UNBRICKED MY LOVE
Win 8
Win XP
Win 8.1 couldn't recognize my phone in flashtool
My last hope was Windows 7
I tried to flash my stock kernel and i have got error : 22/009/2013 20:09:07 - ERROR - 31: A device connected to the system is not in operation.
22/009/2013 20:09:07 - ERROR - Error flashing. Aborted
Same error few times
I pulled my battery out and i tried again and flashing finished successfully
but I couldn't turn my phone anyways
I plug it in pc and i got red led
after few minutes SONY logo appeared by itself for a few seconds,i didn't do anything . . .
so i thought it's because of low batery
Then i plugged my phone into wall socket and after few minutes phone turned of by itself . . .
Now everything works perfect . . .
Thank you all for your help,and your answers
you guys are my heroes
have fun
Click to expand...
Click to collapse
sometime if run on low battery, the flashing will stop at that message (A device connected to the system is not in operation), you are lucky to get it flashing, cause sometime the bootloader will be corrupted if flashing stop suddenly..anyways, happy to get your phone working again have a fine day:victory:
z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?
as I said in the other thread, turn on usb debugging
if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware
NiM72NiK said:
if you cant do anything and powering on or connecting your phone to computer or charging it just makes the red led blink, it means its hard bricked. you may need to use test point
but if you dont have baseband and your device runs, try to flash a new modem(i dont know if its available for z1 or not)
and as i see you were trying to flash a much old ftf ... after 4.3 , flashing older than them will make the modem not work.so if you can get in to flash mode try to flash a newer frameware
Click to expand...
Click to collapse
No i can't go into Flash Mode
srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
unfortunately your phone is hard bricked as its blinking red to everything and must open your phone and hard repair it
follow the instructions on the link below
hope it helps:
http://forum.xda-developers.com/showthread.php?t=2646405
and this is the latest s1 boot .use this one
forum.xda-developers.com/attachment.php?attachmentid=2771435&d=1401467170
ok u give more details for test point and confirm we can try for z1 sir
gregbradley said:
as I said in the other thread, turn on usb debugging
Click to expand...
Click to collapse
no i cant turn usb debugging its full dead ?
srichinu said:
z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply friends?
Is it getting red led when I try to charge it ? I don't understand what went wrong.
I had it for about 24 hours on the charger without any signs of "life" in the "mobile".
Hard reset.
Flash a stock FTF using flashtool.
I went through the process of flashing a FTF with flashtool. and its showing....
27/059/2014 02:59:50 - INFO - Selected Bundle for Sony Xperia Z1 (C6903). FW release : 14.1.G.2.257. Customization : GLOBAL-LTE (1277-1398)
27/059/2014 02:59:50 - INFO - Preparing files for flashing
27/000/2014 03:00:36 - INFO - Please connect your device into flashmode.
27/001/2014 03:01:22 - INFO - Device disconnected
27/001/2014 03:01:26 - INFO - Device connected with USB debugging off
27/001/2014 03:01:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/001/2014 03:01:35 - INFO - Device disconnected
27/001/2014 03:01:39 - INFO - Device connected with USB debugging off
27/001/2014 03:01:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
can anybody come with this solution........?
Click to expand...
Click to collapse
Open Flash Tools, select FTF and wait till it says connect your phone. Now hold down volume and plug in USB to PC
If continued, be happy
If not, unplug fully, and then again hold down volume, and then a bit plug in, like image in the link below
Sorry for bad explanation
I experienced brick about five times, and this my own-made method help me
http://d-h.st/FrT
I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?
srichinu said:
I did has ur instruction red led is lighting continuesly and driver intalling is happening but usb is not recongised and flashing is not done?
Click to expand...
Click to collapse
I think I got what you said
By this method, maybe PC says USB not recognized, but flashing will be done, with no problem
Sent from my C6903 using Tapatalk
MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...
NiM72NiK said:
MR. Saeed, as he says, its hard bricked . no flash mode or anything..fully dead.. so he cant do anything with flashtool.. seams just opening the phone and fix it in emergency mod is the only solution here ...
Click to expand...
Click to collapse
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk
SaeedFazlollahzadeh said:
Sorry, I did not fully read the first post
I think he just should call emergency to move his phone to hospital
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
He has to open it connect the testpoint to GND and conmect the usb cable and repair it in emergency mode...
srichinu said:
No i can't go into Flash Mode
Click to expand...
Click to collapse
Next time do not be so fast and lazy to read instructions provided by developer of the thing you have flashed. Being fast and thinking wrong and fast sometimes produce fatal thing to the your phone. I am sure you will be no lazy next time and I am sure you will be very careful in operations with your next phone
Whats happening when you press and hold for about 5 secconds power + volumeup button? If you see vibration than you are not in hard brick! If there is no vibration but your phone flashing red all time than its hard brick! If not hard brick you can enter into fastboot mode: disconnect usb cable, press and hold power+volume up until you see vibration, than hold volume up button and in same time connect usb cable. After than you must see blue led! If no blue led than probably try to replace usb drivers by installing sony pc companion, reboot computer after that! Allso make sure comuter device manager detect your phone propertly! After that try again all steps. If this not help and you have red light all time than probably your phone is dead! Hope this help.
Hi everyone, i'm newbie here and, for first i'm so sorry formy bad english, but, anyway
My problem is serously hard, someone here having problem like me, for example - click.
Okey, so now my problem: Xperia C5303, i'm don't know which firmware was stay at this XPS until them became bricked, not my phone
Phone isn't boot, don't react to power\+ and - button, when i try to connect it to PC, the phone light up red when attempting to charge, remain solid red for 10 minutes before the LED switches off for around 5-7 minutes.The phone then use to go back to the red LED and the loop would continue. I take a multimeter, plug it at + and - to the batttery, when i connecting USB, RED light up, voltage going to ~3.20V, after RED light switches off and voltage going to ~2.8V and phone again charged to 3.2V and loop, loop, loop. If i disconnect USB cable with 2.9V-3.1V and press PWR button, RED light blinks 3 times, like them discharged. So, i can't put phone to Flashmode\Fastboot mod, for first i think, maybe not enough charging on battery for start flashmode\fastboot, BUT, I was wrong, i charge battery for 4-5Hrs without phone, just use AAA and AA charger laugh,voltage around 3.6V, connected to phone, connect USB and...nothing, just nothing, don't react to anyting, as I understand USB transmits a signal if battery is discharging And, when i connect charged battery and click pwr button, voltage started to fall as if the phone is switched on.
Soooo, in Flashtool, when i connected phone with pressed - button\+ button, PC determine phone like HID device!!!, wooow, how?
I install all drivers that i know, SEUS, PC Compasion, Flastool drivers, drivers from XDA worum for all Sony phones.
Flashtool log:
25/010/2014 15:10:11 - INFO - Device connected with USB debugging off
25/010/2014 15:10:11 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/010/2014 15:10:17 - INFO - Device disconnected
DeviceID in device manager:
USB\VID_0FCE&PID_D17B&REV_0000
USB\VID_0FCE&PID_D17B
So, what to do for debrick this XSP?
Maybe try to install XP? Ah, my OS is Win7 x64
Thanks for all your asweres, best regards, LiquidNettle :3
Stay awesome.
______
I will add, that's what Flashtool showin when pressing Devices - Check drivers:
5/006/2014 16:06:17 - INFO - Device connected with USB debugging off
25/006/2014 16:06:17 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/006/2014 16:06:20 - INFO - List of connected devices (Device Id) :
25/006/2014 16:06:20 - INFO - - USB\VID_0FCE&PID_D17B\5&10EF021E&0&2 Driver installed : true
25/006/2014 16:06:21 - INFO - - HID\VID_0FCE&PID_D17B\6&17F701B0&2&0000 Driver installed : true
25/006/2014 16:06:21 - INFO - List of ADB devices :
25/006/2014 16:06:21 - INFO - - none
25/006/2014 16:06:21 - INFO - List of fastboot devices :
25/006/2014 16:06:21 - INFO - - none
25/006/2014 16:06:22 - INFO - Device disconnected
Flash an FTF file (original firmware) using Flashtool.
They can be found on this forum.
Gamm86 said:
Flash an FTF file (original firmware) using Flashtool.
They can be found on this forum.
Click to expand...
Click to collapse
Thanks for fast answer but how? I can't put phone to flashmode!
Let your phone charge with a wall socket charger (preferably the original one) for atleast 12 hours and then try again.
Done, I will inform you 12 hours pass
@Liquid have this Problem too. Have u found a answer
Gesendet von meinem SGP521 mit Tapatalk 4
arty06 said:
@Liquid have this Problem too. Have u found a answer
Gesendet von meinem SGP521 mit Tapatalk 4
Click to expand...
Click to collapse
Hi arty
No, not found yet :c
Right now, whaiting 12hrs like Gamm say. I installed WinXP and he, too, see the phone as a HID device, WHY? And, if i trying put original, ADB drivers i get an error :c
So, we can't coop with you, arty and try to find how to unbrick our phones
@LiquidNettle
Your phone is indeed hard bricked. Sorry for that. You can try connecting to flashmode by using the technique this guy did: http://forum.xda-developers.com/showpost.php?p=54541794&postcount=1870
[/COLOR]
LiquidNettle said:
Hi arty
No, not found yet :c
Right now, whaiting 12hrs like Gamm say. I installed WinXP and he, too, see the phone as a HID device, WHY? And, if i trying put original, ADB drivers i get an error :c
So, we can't coop with you, arty and try to find how to unbrick our phones
Click to expand...
Click to collapse
Do u have CWM on ur Device? I flash my ROM new with it and it works.:victory:
LiquidNettle said:
Hi everyone, i'm newbie here and, for first i'm so sorry formy bad english, but, anyway
My problem is serously hard, someone here having problem like me, for example - click.
Okey, so now my problem: Xperia C5303, i'm don't know which firmware was stay at this XPS until them became bricked, not my phone
Phone isn't boot, don't react to power\+ and - button, when i try to connect it to PC, the phone light up red when attempting to charge, remain solid red for 10 minutes before the LED switches off for around 5-7 minutes.The phone then use to go back to the red LED and the loop would continue. I take a multimeter, plug it at + and - to the batttery, when i connecting USB, RED light up, voltage going to ~3.20V, after RED light switches off and voltage going to ~2.8V and phone again charged to 3.2V and loop, loop, loop. If i disconnect USB cable with 2.9V-3.1V and press PWR button, RED light blinks 3 times, like them discharged. So, i can't put phone to Flashmode\Fastboot mod, for first i think, maybe not enough charging on battery for start flashmode\fastboot, BUT, I was wrong, i charge battery for 4-5Hrs without phone, just use AAA and AA charger laugh,voltage around 3.6V, connected to phone, connect USB and...nothing, just nothing, don't react to anyting, as I understand USB transmits a signal if battery is discharging And, when i connect charged battery and click pwr button, voltage started to fall as if the phone is switched on.
Soooo, in Flashtool, when i connected phone with pressed - button\+ button, PC determine phone like HID device!!!, wooow, how?
I install all drivers that i know, SEUS, PC Compasion, Flastool drivers, drivers from XDA worum for all Sony phones.
Flashtool log:
25/010/2014 15:10:11 - INFO - Device connected with USB debugging off
25/010/2014 15:10:11 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/010/2014 15:10:17 - INFO - Device disconnected
DeviceID in device manager:
USB\VID_0FCE&PID_D17B&REV_0000
USB\VID_0FCE&PID_D17B
So, what to do for debrick this XSP?
Maybe try to install XP? Ah, my OS is Win7 x64
Thanks for all your asweres, best regards, LiquidNettle :3
Stay awesome.
______
I will add, that's what Flashtool showin when pressing Devices - Check drivers:
5/006/2014 16:06:17 - INFO - Device connected with USB debugging off
25/006/2014 16:06:17 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/006/2014 16:06:20 - INFO - List of connected devices (Device Id) :
25/006/2014 16:06:20 - INFO - - USB\VID_0FCE&PID_D17B\5&10EF021E&0&2 Driver installed : true
25/006/2014 16:06:21 - INFO - - HID\VID_0FCE&PID_D17B\6&17F701B0&2&0000 Driver installed : true
25/006/2014 16:06:21 - INFO - List of ADB devices :
25/006/2014 16:06:21 - INFO - - none
25/006/2014 16:06:21 - INFO - List of fastboot devices :
25/006/2014 16:06:21 - INFO - - none
25/006/2014 16:06:22 - INFO - Device disconnected
Click to expand...
Click to collapse
@Liquid: I am also facing the same problem. My phone is not responding to any hardware activity. Did you tried to connect the phone in flash mode after removing battery.? Tell me if this works.
Hi all guys, thanks for your activity ^)
TechnoSparks said:
@LiquidNettle
Your phone is indeed hard bricked. Sorry for that. You can try connecting to flashmode by using the technique this guy did: http://forum.xda-developers.com/showpost.php?p=54541794&postcount=1870
Click to expand...
Click to collapse
Try this - nothing :c
I think, problem in drivers, beaucase, why PC thinks that the phone is a HID-device?
If you can, please make me something for me, connect your phone to PC and, in device manager find Device ID of your XSP and write it here please. I'll try compare you ID and my, thanks
arty06 said:
[/COLOR]
Do u have CWM on ur Device? I flash my ROM new with it and it works.:victory:
Click to expand...
Click to collapse
I don't know what this phone have or haven't, i doesnt see this phone when them switched on, but congratulations you're lucky
And i can't isntall anything, beaucase i can't enter in fastboot :c
SumitDhingra said:
@Liquid: I am also facing the same problem. My phone is not responding to any hardware activity. Did you tried to connect the phone in flash mode after removing battery.? Tell me if this works.
Click to expand...
Click to collapse
How? Connect USB with pressing - button and remove battery or remove batter and connect USB with minus button?
Oh, somethimes, phone conenctng as QHSUSB_DLOAD what is it?
LiquidNettle said:
Hi all guys, thanks for your activity ^)
Try this - nothing :c
I think, problem in drivers, beaucase, why PC thinks that the phone is a HID-device?
If you can, please make me something for me, connect your phone to PC and, in device manager find Device ID of your XSP and write it here please. I'll try compare you ID and my, thanks
I don't know what this phone have or haven't, i doesnt see this phone when them switched on, but congratulations you're lucky
And i can't isntall anything, beaucase i can't enter in fastboot :c
How? Connect USB with pressing - button and remove battery or remove batter and connect USB with minus button?
Click to expand...
Click to collapse
Remove battery and then connect USB with volume down button pressed.
My friend's Xperia E went into flash mode without battery, so there is a chance that SP will also get into flashmode without battery.
Or else try this if you had screwed your kernel:
Remove your phone's battery and put atleast 30-40% charged battery in it. Your can also charge your phone's battery by connecting it to another Xperia SP. Once you had 30-40% battery, try to boot your phone. It should get into bootloops, then you can connect it in flash mode.
I need to try 2nd method desperately but couldn't find an Xperia sp ...?
SumitDhingra said:
Remove battery and then connect USB with volume down button pressed.
My friend's Xperia E went into flash mode without battery, so there is a chance that SP will also get into flashmode without battery.
Or else try this if you had screwed your kernel:
Remove your phone's battery and put atleast 30-40% charged battery in it. Your can also charge your phone's battery by connecting it to another Xperia SP. Once you had 30-40% battery, try to boot your phone. It should get into bootloops, then you can connect it in flash mode.
I need to try 2nd method desperately but couldn't find an Xperia sp ...?
Click to expand...
Click to collapse
Xperia SP's battery is built-in.
LiquidNettle said:
Hi all guys, thanks for your activity ^)
Try this - nothing :c
I think, problem in drivers, beaucase, why PC thinks that the phone is a HID-device?
If you can, please make me something for me, connect your phone to PC and, in device manager find Device ID of your XSP and write it here please. I'll try compare you ID and my, thanks
Click to expand...
Click to collapse
I can't check it out, but do stay tune as I will post it shortly.
You do not need to think about how was it detected by your computer. You just need to make sure it is connected to Flashtool. Either way, you must retry the method I have linked you to, or try the one in this link: http://forum.xda-developers.com/showpost.php?p=54634835&postcount=35
Does your phone able to connect to your computer by any means? I mean does Windows ever detect any presence of device (noticeably the usual "installing driver" balloon or the "hardware connect" sound)?
SumitDhingra said:
Remove battery and then connect USB with volume down button pressed.
My friend's Xperia E went into flash mode without battery, so there is a chance that SP will also get into flashmode without battery.
Or else try this if you had screwed your kernel:
Remove your phone's battery and put atleast 30-40% charged battery in it. Your can also charge your phone's battery by connecting it to another Xperia SP. Once you had 30-40% battery, try to boot your phone. It should get into bootloops, then you can connect it in flash mode.
I need to try 2nd method desperately but couldn't find an Xperia sp ...?
Click to expand...
Click to collapse
Hi again
I have two batteries, 1 was all time ucharged, beaucase phone can't charge them and 1 full charged. When i connect full battery phone do not respond to ANYTHING!
Connnecting USB - nothing, press PWR button - nothing. That is when the battery is charged to third-party way and connect to phone, usb stops responding. And when connecting USB to phone with fully charged battery begins to run and phone heated on multimetr voltage going from 3.72V to 3.69V and after 1-2H to 2.8V and phone going in this idiotic loops.
TechnoSparks said:
Xperia SP's battery is built-in.
I can't check it out, but do stay tune as I will post it shortly.
You do not need to think about how was it detected by your computer. You just need to make sure it is connected to Flashtool. Either way, you must retry the method I have linked you to, or try the one in this link: http://forum.xda-developers.com/showpost.php?p=54634835&postcount=35
Does your phone able to connect to your computer by any means? I mean does Windows ever detect any presence of device (noticeably the usual "installing driver" balloon or the "hardware connect" sound)?
Click to expand...
Click to collapse
Still nothing
Yeah, its all okey
E=LiquidNettle;55717389]Hi again
I have two batteries, 1 was all time ucharged, beaucase phone can't charge them and 1 full charged. When i connect full battery phone do not respond to ANYTHING!
Connnecting USB - nothing, press PWR button - nothing. That is when the battery is charged to third-party way and connect to phone, usb stops responding. And when connecting USB to phone with fully charged battery begins to run and phone heated on multimetr voltage going from 3.72V to 3.69V and after 1-2H to 2.8V and phone going in this idiotic loops.
Still nothing
Yeah, its all okey[/QUOTE]
Can you tell me how did you bricked your phone?
SumitDhingra said:
E=LiquidNettle;55717389]Hi again
I have two batteries, 1 was all time ucharged, beaucase phone can't charge them and 1 full charged. When i connect full battery phone do not respond to ANYTHING!
Connnecting USB - nothing, press PWR button - nothing. That is when the battery is charged to third-party way and connect to phone, usb stops responding. And when connecting USB to phone with fully charged battery begins to run and phone heated on multimetr voltage going from 3.72V to 3.69V and after 1-2H to 2.8V and phone going in this idiotic loops.
Still nothing
Yeah, its all okey
Click to expand...
Click to collapse
Can you tell me how did you bricked your phone?[/QUOTE]
I can't :laugh:
Its not my phone, I got a freebie. Guy, who gave me this phone say, what his girlfriend dropped and LCD is damaged, that's all.
Phone not powering up
Phone not powering up
My phone Sony Xperia SP went dead after flashing the kernal mentioned in http://forum.xda-developers.com/show...697865&page=36
Not showing any activity.
Now phone is not powering on ..
I was having a unlocked bootloader + root + cm11
I flashed the new kernal using Flash tool.
Can anyone please help me.
This issue is resolved.
Please find the solution here
sanusunnyk said:
Phone not powering up
My phone Sony Xperia SP went dead after flashing the kernal mentioned in http://forum.xda-developers.com/show...697865&page=36
Not showing any activity.
Now phone is not powering on ..
I was having a unlocked bootloader + root + cm11
I flashed the new kernal using Flash tool.
Can anyone please help me.
Click to expand...
Click to collapse
Flash stock ftf via flashtool
rdlegy said:
Flash stock ftf via flashtool
Click to expand...
Click to collapse
His phone has already working normally. He should edit the question when he succeeded with his phone though.