Hello to everyone !!!
This release is rooted, deodexed and also has a new busybox installed !
This Rom should be run on all devices Archos G9 ....but you need to activate SDE menu !
Include :
root access ( added su binary and Superuser application ! ) ;
insecure kernel ( ro.secure = 0 ) ;
USB debugging already enabled ;
replaced stock busybox & installed a new one !
deodexed ( all in system/app/* & system/framework/* )
enabled init.d to run scripts ( all scripts in /system/etc/init.d will be running automatically on every boot ! ) ;
stock bootanimation ;
zipalign on boot for /data/app/*.apk ;
optimize database with sqlite3 ;
Download :
please download from here all necessary files :
archos.ext4.update
zImage
initramfs.cpio.lzo
Archos_Deodex_4.0.28.zip
Mirror :
Archos_Deodex_4.0.28.zip
Archos_Deodex_4.0.28.zip
Installation :
connect USB cable ;
unzip Archos_Deodex_4.0.28.zip into Archos_Deodex_4.0.28 directory
copy archos.ext4.update in your device, or by adb command : > adb push archos.ext4.update /mnt/storage
go to recovery SDE and Remove android kernel if you have already installed any official firmware !
go to Flash kernel & Initramfs and copy here zImage and initramfs.cpio.lzo from ( Archos_Deodex_4.0.28)
Ok ! ... & wait to boot !
Many thanks for freezenook - to puting up all the mirror upload !!!
regards,
Surdu Petru
***reserved***
Hello !
Can somebody confirmed if it boot ?
Thanks ...
surdu_petru said:
Hello !
Can somebody confirmed if it boot ?
Thanks ...
Click to expand...
Click to collapse
Hi surdu_petru,
I confirm, your deodexed firmware boots
Thanks again for your work done :good:
I will test during few days to check the stability.
regards.
thanx surdu_petru
Hey surdru after hard test (benchs,game ,and other app ) your rom work perfectly . Great job , and thank you for your work.
Is possible create overclock kernel for this rom? If you want i test for you.
Score quadrant : 2782 with archos gen9 A101s 8go 1ghz 512 ram
Hi surdu_petru,
I confirm too, your deodexed firmware boots normaly on my Archos G9 101 and everything work fine. :good:
Thanx for your great job.
Good luck in future works
insecure kernel ( ro.secure = 0 ) ;
Click to expand...
Click to collapse
Could you explain what is it and for what purposes it is insecure? Thanks.
theadenter said:
Could you explain what is it and for what purposes it is insecure? Thanks.
Click to expand...
Click to collapse
You can have root access over ADB shell.
Hi !
- for all those who want to improve performance , you can use the same kernel ( zImage ) from this OP !
- also, make sure you copy all scripts from /init.d in this rom !
Good luck !
surdu_petru said:
Hi !
- for all those who want to improve performance , you can use the same kernel ( zImage ) from this OP !
- also, make sure you copy all scripts from /init.d in this rom !
Good luck !
Click to expand...
Click to collapse
Thanks again for your work Surdu.
I'd like to try this firmware but wonder if it'll be an improvement over 407 at all, with all the issues i experienced with 4026.
At the moment i am using your deodexd/rooted 407 version; will it be easy to revert back to that if the problems i was having with 4026 have not been solved in this latest rom after all?
Surdu,
Sorry, newb question... what does the following mean:
"also, make sure you copy all scripts from /init.d in this rom!"
Copy from where and place where?
Thanks,
smithmal
smithmal said:
Surdu,
Sorry, newb question... what does the following mean:
"also, make sure you copy all scripts from /init.d in this rom!"
Copy from where and place where?
Thanks,
smithmal
Click to expand...
Click to collapse
Hi !
I'm sorry if I was a little confused
Ok ...copy from here in currently Archos_Deodex_4.0.28 ! :good:
Overclok dont work with zImage , no boot blocked on splash screen . I try wipe dalvik no work , i try reset android and flash zImage oc , any blocked on splash screen , please surdru enable overclock on 4.0.28 zImage . The other zimage block my touchscren after standby .
muti642 said:
Overclok dont work with zImage , no boot blocked on splash screen . I try wipe dalvik no work , i try reset android and flash zImage oc , any blocked on splash screen , please surdru enable overclock on 4.0.28 zImage . The other zimage block my touchscren after standby .
Click to expand...
Click to collapse
Hi !
Archos do not update kernel source code for this update 4.0.28 ! = no OC kernel yet ! sorry ...
Hi surdu_petru,
I don't know if it is a problem but i have a strange comportment when my tablet boot.
Usually when the tablet boots, you have a first static screen ' ARCHOS Entertainment" and after the boot animation.
With this rom, i have a black screen during the boot and the boot animation during a short time (less than 5s) just before to have the lockscreen.
If someone can tell me if he had the same comportment please ?
Regards.
Yes black screen and boot logo archos 3 sec and loock screen lol new archos bug.
My touchscreen work perfectly with 4.0.28 , astalavista screen blocked after stand by and blocked screen in game .
i just flashed!
the flash has not wiped the previous configuration. my apps and data remains. in the info menu the rom version is 4.0.28.
i can't remeber if the previous update deleted settings or not. i flashed the pad so many times and my memories are a bit confused
anyway, thanks!
Great wok again Surdu, any update on an OC kernal for it?
just original keyboard
Hi Surdu , with this rom I cannot use other keyboard just original. In settings I hawe choose swiftkey butt when I go writing its still original there.
Related
Hi all !
Rom => Archos ICS Firmware 4.0.6 - Root & Busybox - based on Stock Archos ICS Firmware 4.0.6 !
In this Rom original files have not been modified, only was added "su" , "Superuser.apk" & "busybox" !
All improvements to the original Firmware 4.0.6 , you can also find in this Root version .
This Root version works on all tablets gen9, is stable and can be used as a daily ROM !
These are the files you need to install Root Version :
- archos.ext4.update in archive archos.ext4.406.zip =>1° https://hotfile.com/dl/154875410/d03696b/archos.ext4.406.zip.html => 2° http://www.2shared.com/file/80i1MXqz/archosext4406.html
- zImage and initramfs.cpio.lzo in archive archos.406.zip => 1° http://www.4shared.com/zip/VXFNNLpf/archos406.html => 2° http://depositfiles.com/files/3p7cqyeq6 => 3° https://rapidshare.com/files/3553644044/archos.406.zip
Installation :
- copy archos.ext4.update into Internal Storage ( /data/media ; /mnt/storage )
- reboot into SDE menu and under Developer Edition Menu , Flash Kernel and Initramfs : copy zImage and initramfs.cpio.lzo on the new driver that appears on desktop/laptop ;
- ok ! and wait for reboot your devices : after reboot you can see Android update system for a while .....be patient !
In this Rom we do not have custom "bootanimation" , no extra apps added , anything else in addition to original !!!
regards,
surdu_petru
surdu_petru said:
Hi all !
Rom => Archos ICS Firmware 4.0.6 - Root & Busybox - based on Stock Archos ICS Firmware 4.0.6 !
***Update in progress***
regards,
surdu_petru
Click to expand...
Click to collapse
Waiting for root version. thanks
Thanks... Merci
f5 f5 f5 f5 f5 f5 f5 f5 f5 f5
waiting for upload to finish that was very quick work sir!
I'm not sure if I'll update, in "test firmware thread" it was reported that pdf reading still is a problem for the 4.0.6 firmware.
BTW- initramfs are quite universal- ICS init still can boot honeycomb (Multiboot init works fine, Letama's init+cwm works fine but I didn't test CWM yet)
Hi, so this is 4.0.6 rooted based on the new fw that came out just today? NOT the test2 FW, right?
IngoPan said:
Hi, so this is 4.0.6 rooted based on the new fw that came out just today? NOT the test2 FW, right?
Click to expand...
Click to collapse
Hi!
YES ! exactly ...
Thank you surdu_petru!
Do you suggest to wipe after the firmware upgrade from 4.0.5? Thanks.
great job
but i wait [email protected]
hi surdu_petru it may be useful, even if 100% should be a pure case. I have always had less trouble (crashes, reboots) with your "light rom" than other rom (ics blue / rooted rom). On my hot g9 101 the most stable rom is your "ICS Firmware 4.0.5 - Overclock Edition". thank you
hitman72 said:
hi surdu_petru it may be useful, even if 100% should be a pure case. I have always had less trouble (crashes, reboots) with your "light rom" than other rom (ics blue / rooted rom). On my hot g9 101 the most stable rom is your "ICS Firmware 4.0.5 - Overclock Edition". thank you
Click to expand...
Click to collapse
Hi !
Thanks ! ...and you can take a look here => http://forum.xda-developers.com/showthread.php?t=1592535&page=5 #48
mrgimo said:
Thank you surdu_petru!
Do you suggest to wipe after the firmware upgrade from 4.0.5? Thanks.
Click to expand...
Click to collapse
it is not required however if you experience problems it certainly may help
Surdu_petru you are the man!
Thank you very much!
hi, first I updated to standard 4.0.6, all ok. then installed this rom. with standard 4.0.6 wifi works, using rooted version wifi doesn't work. I have always "getting IP" and discnnects. ciao
Thanks!
So just basically, there isn't any way to gat the multiboot to work with both [email protected] and Stock rooted FW with multiboot? I don't really know how to handle your .update files. I currently have Ubuntu and [email protected] v1 in /data/local and modified Multiboot Kernel & initramfs. Could you tell me how to get this Stock rooted with my other images? Thanks
blogmaw said:
Thanks!
So just basically, there isn't any way to gat the multiboot to work with both [email protected] and Stock rooted FW with multiboot? I don't really know how to handle your .update files. I currently have Ubuntu and [email protected] v1 in /data/local and modified Multiboot Kernel & initramfs. Could you tell me how to get this Stock rooted with my other images? Thanks
Click to expand...
Click to collapse
HI!
I think ( I'm not sure ..) ...you need to rename archos.ext4.update -> archos.ext4 for work in multiboot , also you can ask @sirduke989 !
hitman72 said:
hi, first I updated to standard 4.0.6, all ok. then installed this rom. with standard 4.0.6 wifi works, using rooted version wifi doesn't work. I have always "getting IP" and discnnects. ciao
Click to expand...
Click to collapse
Reset you router if you have not. This ROM is the smoothest for me yet
Sent from my GT-P7510 using xda premium
Thank you, surdu_petru!
One thing I wonder about: After installing this updated all my homescreens where reset to factory settings (all homescreens clear, only a few standard apps on homescreen 3).
Every other time I installed one of your modified ROMs or any of the original ROMs my homescreens stayed as I set them up before.
Am I the only one this happened to?
All the other settings where kept, only the homescreens where reset.
Yes me too. I guess the update reinstalls launcher. Try to make a backup for next time
esque said:
Thank you, surdu_petru!
One thing I wonder about: After installing this updated all my homescreens where reset to factory settings (all homescreens clear, only a few standard apps on homescreen 3).
Every other time I installed one of your modified ROMs or any of the original ROMs my homescreens stayed as I set them up before.
Am I the only one this happened to?
All the other settings where kept, only the homescreens where reset.
Click to expand...
Click to collapse
Hi!
Yes, you are right ....all this because launcher2 was reset !
HI ALL !!!
I had updated my Custom Rom [email protected] to V03 !!!
Custom Rom based on firmware version 4.0.7 (4.0.3)!!!
This Rom should work on all devices Gen9 , and you can use as a daily rom !
This latest update adds stability, a more fluid use, and also you can see the disappearance of any errors due to implementation of [email protected] !!!
- Included : Update 19/07/2012
root access ;
su binary updated to last version v3.1.1 ;
Superuser updated to the last version v3.1.3 (46) ;
removed stock busybox ;
new busybux installed proper and updated to the last version v1.20.2 -Stericson ;
possibility to enable the both core to any Governor ;
run scripts to init.d ;
tweak on/off network ;
tweak fix permission :
zipalign all applications in /data/app/
windows animation on - with possibility to turn off ( see Spareparts+);
custom Launcher2.apk with new wallpapers ;
added Apex Launcher ;
added Go Launcher HD ;
new bootanimation ;
more icon replaced ( ~90% changed ! );
removed some stock applications ( ArchosUpdate, FloatingImage2, Daos, OnlineRegistration );
more applications upadetd on system/app ( Gmail, Google+, Maps, MarketPlay, Music2, Street, YouTube ) ;
some new app installed on data/app ( Dolphin browser, Flashplayer, Office, MX player, PassMark, PlayBooks, Root Browser Lite, Root Check Basic, Sopcast, Spare Parts+, Terminal Emulator, Zimly Player );
real possibility to watch TV online ( now only beta test ) ;
Info for hdd users : archos.ext4.update has 450MB !!!
Download link : Update 19-07-2012 :
archos.ext4.update -> in archive : source 1° [email protected] ; source 2° [email protected] ; source 3° [email protected] ; source 4° [email protected]
zImage & Initramfs -> in archive : 1°Kernel_407.zip 2°kernel_407.zip
Install :
- copy archos.ext4.update in /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu -> ( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- after everything was installed - please reboot your device !
To activate the second core, you need the following steps :
- copy /system/S1tweak in /system/etc/init.d/ or ( > adb shell ; # cp /system/S1tweak /system/etc/init.d ; # exit )
- open No-frills CPU Control :
- choose the desired Governor ( but not hotplug ) !
- choose the desired frequency , but not overclocked ! ( when the device will boot - will open with the selected frequency , so please choose max. frequency = your max. stock frequency )
- check "Apply on boot"
- check "Applay"
- check allow if superuser asked permission
- reboot your device !
- Now , both core will be used in any selected Governor ( other than hotplug ! ).
[email protected] in image :
bootanimation:
screenshots:
[URL=http://uploadimage.ro/viewer.php?file=90504585929835812931.png]
[/URL]
Change and sharing the content of this Custom Rom is strictly prohibited ! (You can share this Custom Rom only by indicating the source ! => http://forum.xda-developers.com/showthread.php?t=1717961)
* not available ( available as soon as archos will update kernel source code ! ).
Many Thanks to Mr. Cajl for testing [email protected] on several different devices...!!!
regards,
Surdu Petru
Added S1tweak into init.d Yes or Not ???
We need S1tweak added in /system/etc/init.d for two processors to run proper ?
- I did some tests to find the answer ... look below :
First test - without ../init.d/S1tweak ( settings max. freq 1.2GHz , Governor = performance )
Quadrant ( cpu ) = 2890 / PassMark (cpu) = 2014
Second test - with ../init.d/S1tweak ( need reboot your device ) ( settings max. freq 1.2GHz , Governor = performance )
Quadrant (cpu) = 5742 / PassMark (cpu) = 4173
What makes practically this script :
- running this script on boot the device will run with the same performance for any selected Governor;
- however , the best performance still remains for Governor = hotplug !!!
Please , use this script only if you feel you need !!! ( one case would be if you use another governor than hotplug...and you need at the same time - high performance of the device !!! )
Click to expand...
Click to collapse
I wait
Shano56 said:
I wait
Click to expand...
Click to collapse
Hi!
I'll update later...within 24 hour !!! Thanks & good luck ...
surdu_petru said:
Hi!
I'll update later...within 24 hour !!! Thanks & good luck ...
Click to expand...
Click to collapse
oh 24hr okay i will check back tomorrow! thanks!
cant wait for this!
Hi surdu_petru,
you a right.
Yesterday i tested multiboot with v02 and see that it didn't work.
I think "when he do an update to v03"
and .... this morning i take a look and wtf he do it.
Waiting for your upload.
Style is a little bit near SGS III style isn't it?
Looks very nice.
Bye
Is the difference between this ICSBLUE rom en the custom ics rom from the other thread only cosmetic ?
This rom will be with "Test 3 zImage" from "[ROM] NEW CUSTOM ROM ICS - Update 04/06/2012"?
DragosP2010 said:
This rom will be with "Test 3 zImage" from "[ROM] NEW CUSTOM ROM ICS - Update 04/06/2012"?
Click to expand...
Click to collapse
I think that the last test zImage is 9:
http://forum.xda-developers.com/showpost.php?p=27572240&postcount=371
I know, but I have 4430.
Great i Wait !
Yeah me too, also waiting for my son to be born, wonder which will happen first, my wife has been in labour for the last few hours :-/ thanks surdu for the amazing work you do :-D
Sent from my X10i using M&M's MIUI v2.0 + tapatalk :-D
DragosP2010 said:
This rom will be with "Test 3 zImage" from "[ROM] NEW CUSTOM ROM ICS - Update 04/06/2012"?
Click to expand...
Click to collapse
Hi!
Yes, @samx69 - he is right !!! will be the ultimate test zImage !!!
...also thanks samx69 for your attention !!!
DragosP2010 said:
I know, but I have 4430.
Click to expand...
Click to collapse
On 4430 OC seem to be the same to test3 zImage , may be more quickly !!!
djdoc1975 said:
Yeah me too, also waiting for my son to be born, wonder which will happen first, my wife has been in labour for the last few hours :-/ thanks surdu for the amazing work you do :-D
Sent from my X10i using M&M's MIUI v2.0 + tapatalk :-D
Click to expand...
Click to collapse
Hi!
Congratulations and all the best !!! I'm happy for you ! Good luck ...
cajl said:
Great i Wait !
Click to expand...
Click to collapse
Hi !
OK ....should be ok within 2~3 hours !!!
Number0ne99 said:
Hi surdu_petru,
you a right.
Yesterday i tested multiboot with v02 and see that it didn't work.
I think "when he do an update to v03"
and .... this morning i take a look and wtf he do it.
Waiting for your upload.
Style is a little bit near SGS III style isn't it?
Looks very nice.
Bye
Click to expand...
Click to collapse
Hi!
YES, you are right ....but I changed more icon ( some of them very well hidden in the system !!! )
- I think will not work on multiboot ! ...but you can try !!!
sheriffy77 said:
Is the difference between this ICSBLUE rom en the custom ics rom from the other thread only cosmetic ?
Click to expand...
Click to collapse
Hi!
Based on firmware 4.0.6 with latest kernel update - and will included more stuff like previous versions !
surdu_petru said:
Hi!
Based on firmware 4.0.6 with latest kernel update - and will included more stuff like previous versions !
Click to expand...
Click to collapse
But the other thread with custom ICS is also based on 4.0.6 with kernel update ?
I run the other ICS custom on my archos 80 @ 1Ghz and was wondering if this would bring any advantage ?
keep up the good work !
Hi all !
Rom => The Last Archos ICS Firmware 4.0.7 - Root version - based on Stock Archos ICS Firmware 4.0.7 !
Upadte 16-07-2012 - to fix some touchscreen issue ( not solved - seems to be also in Official Archos Firmware !)
This Rom should be work for all Archos G9 ....but you need activate SDE menu !
In this Rom original files have not been modified, only was added "su" , "Superuser.apk" !
All improvements to the original Firmware 4.0.7 , you can also find in this Root version .
Firmware changes
Version 4.0.7 - June 19th, 2012
Applications: fix no audio when launching video capture impacting applications like Skype
Display: graphics performance enhancements
Hard drive based products: avoid potential loss of hard drive when 3G USB port is switched on with no peripheral attached
Wi-Fi: fix some more disconnect cases happening on some access points
This Root version works on all tablets gen9, is stable and can be used as a daily ROM !
These are the files you need to install Root Version :
- archos.ext4 in archive : archos_407.zip
- zImage and initramfs.cpio.lzo in archive : Kernel_407.zip Mirror : kernel_407.zip - 4.72 MB
Installation :
- copy archos.ext4 into Internal Storage ( /mnt/storage )
[*]- reboot into SDE menu and under Developer Edition Menu ,( remove Android Kernel if available) than Flash Kernel and Initramfs : copy zImage and initramfs.cpio.lzo on the new driver that appears on desktop/laptop ;
[*]- ok ! and wait for reboot your devices : after reboot you can see Android update system for a while .....be patient !
In this Rom we do not have custom "bootanimation" , no extra apps added , anything else in addition to original !!!
For all those who want a proper use (without touchscreen issue) ....please check this thread ! Thanks !
regard,
surdu_petru
Thanks for your work!
Nicee Will download hand try in a few hours
Sent from my HTC One X using xda premium
Downloading now, thanks surdu_petru
Is VPN support present?
zando2712 said:
Is VPN support present?
Click to expand...
Click to collapse
Hi!
You can check lib/modules/ to see if is there tun.ko module !!!
I installed firmware before you responded.
Thank you surdu_petru!
VPN support is in.
Browsing to lib/modules/ I see no tun.ko though.
should not be ....
should not be ....
I continue riding the loop
practice in the installation, the tablet starts but if I turn it off at the next reboot would always live as if part of the new rom (upgrade Android ...)
retraced to 4.06 waiting for better times
thanks
miki8989 said:
should not be ....
I continue riding the loop
practice in the installation, the tablet starts but if I turn it off at the next reboot would always live as if part of the new rom (upgrade Android ...)
retraced to 4.06 waiting for better times
thanks
Click to expand...
Click to collapse
....I'll reupdate now the initramfs !
Thanks !!!
Ok ! Now you can re-download kernel.407.zip and re-flash !!! Good luck ...
tanks
Greetings,
After upgrading to 4.0.7 GMail crashes at startup: "Unfortunately, Gmail has stopped".
Anyone else experience this problem?
4.0.7 installed and working as expected!
abel.e.pereira said:
Greetings,
After upgrading to 4.0.7 GMail crashes at startup: "Unfortunately, Gmail has stopped".
Anyone else experience this problem?
Click to expand...
Click to collapse
Hi!
...do you updated on the market the latest version ?
surdu_petru said:
Hi!
...do you updated on the market the latest version ?
Click to expand...
Click to collapse
Hello,
I missed the GMail upgrade :-|
Working fine after upgrading. You're the man!
Thanks for the tip and the super quick reply.
thanks
works perfectly
resul quadrant
cpu - 6809
mem - 2459
i/o - 1116
2d - 990
3d - 1612
total - 2597
with fly overclocking
you can do nothing for the market that does not load some app (antutu, amazon etc..)
I tried changing the build.prop but even if the device is seen from a google samsung, the app will still not be compatible
grazie
Hi, I need a root rom with a kernel that supports "loop devices". Does this kernel update support "loop device"? Thanks in advance.
Best.
Nice, this firmware worked.
But are you not allowed to factory reset after using this? After factory reset I can't boot anymore.
GPS now working
Thanks for this Surdu. Can confirm that both the Archos stock and this ROM are compatible with GPS now (I get instant locks). I am a happy man.
BTW, is the kernal you included all the G9 to overclock? I have a 4460 and am getting quadrant score of 1781 with a max and min @ 1.2 GHz (Performance Governor).
Thanks,
smithmal
thanks again for your work surdu
is it possible to activate the bootanimation? i remember that it works in earlier firmwares.
just GREAT !
http://www.jbmm.fr/?p=28311
Hi to everyone !!!
I managed to edit a version to fix some touchscreen issue !
This release is Rooted, deodexed and also has a new busybox installed !
This Rom should be work for all Archos G9 ....but you need activate SDE menu !
- Include :
root access
su binary the last updated to v3.1.1
Superuser the last update to v3.1.3
busybox installed & updated to v1.20.2
deodexed ( all on system/app/* & system/framework/* )
enabled init.d to run script
bootanimation
removed Launcher2 , ArchosUpdate & OnlineRegistration !
added some extra app
updated to the last version : Maps, Street, Music2, MarketPlay, Google+, YouTube, Gmail !
added GoLauncherHD !
- Download link :
Update 19/07/2012 ( fix adb -> PC ! )
archos.ext4.update -> in archive : source 1° deodex.407.zip ; source 2° deodex.407.zip
zImage & Initramfs -> in archive : source 1° Kernel_407.zip ; source 2° Kernel_407.zip .
- Install :
- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer !
If bootanimation freezes on your first boot - please just reset device ( press & hold power button ~10sec.)
Stock deodexed Launcher2.apk .
> adb push Launcher2.apk /system/app
regard,
Surdu Petru
Where can I download?
Where can I download?
seno1963 said:
Where can I download?
Click to expand...
Click to collapse
Hi !
I'll upload now !
How do I get back the stock launcher?
baari21 said:
How do I get back the stock launcher?
Click to expand...
Click to collapse
Hi!
I'll upload soon deodexed Launcher2.apk ...you can do :
> adb push Launcher2.apk /system/app
Hi !
Removing stock Launcher ....now my tablet seem to be OK ! ...succeed to unlock from first touch, keyboard not typing only...all seems to be good now ! :good:
surdu_petru said:
Hi !
Removing stock Launcher ....now my tablet seem to be OK ! ...succeed to unlock from first touch, keyboard not typing only...all seems to be good now ! :good:
Click to expand...
Click to collapse
Thats good news Surdu, I think after trying many launchers, your choice of GoLauncherHD is perfect for this rom :good:
mrm1 said:
Thats good news Surdu, I think after trying many launchers, your choice of GoLauncherHD is perfect for this rom :good:
Click to expand...
Click to collapse
Hi!
Thanks & good luck !
Thank you man. Nice work!
Sorry for noob's question: what the stock dedexed laucher2 is for?
Thank you all. Bye!
Sent from my ARCHOS 101G9 using xda premium
berluscraxi said:
Thank you man. Nice work!
Sorry for noob's question: what the stock dedexed laucher2 is for?
Thank you all. Bye!
Sent from my ARCHOS 101G9 using xda premium
Click to expand...
Click to collapse
Hi !
Thanks !...is just for this rom ! ( is original like in firmware 4.0.7..but is deodexed ) .
Tu put in your rom , please first use terminal emulator and :
> su
# rm /bin/sh
# ln -s /system/bin/sh /bin/sh
# exit
> exit
...now connect USB cable on PC and use > adb push Launcher2.apk system/app/
Good luck !
Hat Touchscreen issues you solvd? Unlock Problems, ghost Fingers?
Gesendet von meinem ARCHOS 101G9 mit Tapatalk 2
IngoPan said:
Hat Touchscreen issues you solvd? Unlock Problems, ghost Fingers?
Gesendet von meinem ARCHOS 101G9 mit Tapatalk 2
Click to expand...
Click to collapse
Hi !
Yes, Yes ! you are right ....now seem to be gone ! :good:
By chance is this rom faster than stock? Or is it just a mind trick? thanks for the stock launcher surdu.
baari21 said:
By chance is this rom faster than stock? Or is it just a mind trick? thanks for the stock launcher surdu.
Click to expand...
Click to collapse
Hi !
...seems to be a bit faster ! ...but not too much :good:
surdu_petru said:
Hi !
Yes, Yes ! you are right ....now seem to be gone ! :good:
Click to expand...
Click to collapse
THATS a FANTASTIC news. Let me install your rom immediately.
Hi!
...because adb command not fuction ....I'll update now archos.ext4.update 100% functional !
Thanks ! :good::good:
Can some1 please upload deodex_407.zip to zippyshare.com? Zippy is really one of the world´s fastest and most reliable 1click hoster. Please start prefering to use it.
Hmm now hotfile says file deleted because of copyright blah. Can some1 please upload again to zippyshare - THANKS!
IngoPan said:
Can some1 please upload deodex_407.zip to zippyshare.com? Zippy is really one of the world´s fastest and most reliable 1click hoster. Please start prefering to use it.
Hmm now hotfile says file deleted because of copyright blah. Can some1 please upload again to zippyshare - THANKS!
Click to expand...
Click to collapse
Hi!
Yes ! I deleted the file a few minutes ago !
I'll upoad soon ....now in update ! ...I'll try to upload in several places ! :good:
( zippyshare is not so good ...you can upload max. 200MB on files !!! ) - I have [email protected] with 227MB ...so I can not upload with this zippyshare !
surdu_petru said:
Hi!
Yes ! I deleted the file a few minutes ago !
I'll upoad soon ....now in update ! ...I'll try to upload in several places ! :good:
( zippyshare is not so good ...you can upload max. 200MB on files !!! ) - I have [email protected] with 227MB ...so I can not upload with this zippyshare !
Click to expand...
Click to collapse
Installed, Now lets see if we fixed that Touchscreen mess. Will let u guys know after 2,3 days of usage.
i want to b curious: HOW have you updated the TS driver? War exactly was the Problem?
Gesendet von meinem ARCHOS 101G9 mit Tapatalk 2
Hi to evryone !
The last Archos update for 80/101 Gen9 ( 25/10/2012 ) : Android 4.0.4 Firmware 4.0.25 with Root access !
This Rom is based on unmodified Android system , Archos Firmware 4.0.25 !
This Rom can be installed only if you have already enabled SDE on your tablet .
Change log :
Android: IceCream Sandwich 4.0.4 version
Media Center: network indexing on network shortcut menu (+), network shortcuts creation is proposed on network share directory long press
Media Center: new simplified Movie/TV Shows/All Video views
Media Center Video: new video information view with backdrop display and chooser (click on backdrop to change it)
Media Center Video: poster can be changed by clicking on it in the video Information view
Video Scraper: faster media information retrieval process. Note that in the migration process, all your video scraper information will be lost.
Subtitles: ability to download and save subtitles for network shares
Media Center: add video search
Media Center Music: Album art swipe gesture support
Remote control: control your tablet with your TV remote through HDMI on TV compatible hardware (directional pad, multimedia and color TV remote keys)
Archos Remote: support of remote touch pad
Wi-Fi: new more robust driver
Media Center Video: fix audio desync for some MPEG4/AVI files
Media Center Video: fix MPEG PS/VOB audio track selection
Media Center Video: fix UPNP playback of large files (>4GB)
Media Center Video: fix seeking in some TS files
Media Center Video: fix playing certain MKV files
Media Center Video: fix playing certain H264 files
Media Center Video: improve DVD/VOB playback in case there are IFO files present
Media Center Video: add support for MPL2 subtitle format
Media Center Video: improve playback of H264/AAC TS files
& also ...
increase data I/O
enabled init.d* to run scripts
Download :
please download from here all necessary files :
archos.ext4.update
zImage
initramfs.cpio.lzo
Stock_Root_4.0.25.zip - 206.48 MB
Installation :
connect USB cable ;
unzip Stock_Root_4.0.25.zip into Stock_Root_4.0.25 directory
put archos.ext4.update from (Stock_Root_4.0.25) in your device, or > adb push archos.ext4.update mnt/storage/
go to recovery SDE and Remove android kernel if you have already installed any official firmware !
go to Flash kernel & Initramfs and copy here zImage and initramfs.cpio.lzo from (Stock_Root_4.0.25)
Ok ! ... & wait to boot !
* just put your favorite scripts in init.d directory , and reboot your device !
( no need extra settings ...my Rom takes care of them to make proper settings ! )
( ..also, keep in mind what scripts you use .... the stock busybox has limited applets !!! )
regard,
Surdu Petru
Wanted to be the first to say thanks. Your work is awesome.
PaTr10T said:
Wanted to be the first to say thanks. Your work is awesome.
Click to expand...
Click to collapse
Hi !
Thank you , for your THANKS !
Good luck ! :good:
Want to be the first to say merci
Sent from my ARCHOS 80G9 using xda app-developers app
solrakk6 said:
Want to be the first to say merci
Sent from my ARCHOS 80G9 using xda app-developers app
Click to expand...
Click to collapse
Hi ...
also ...merci beaucoup !
- you can install over 4.0.24, no worries !
& for data backup I'm afraid you need to use a application from PlayStore !
Good luck ! :good:
Why my gmail account dont show my event on calendar?
So at the moment its not possible make a full backup of my rom like with cwm right?!
And what's the best governor for save battery duration??
Sent from my ARCHOS 80G9 using xda app-developers app
Hi Surdu
Installed this rooted version, ran O.K. .I've reverted to Clean-Slim-Fast as I prefer the slimmed down version.
Best regards
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
Hi, plse just confirm i have do the good step (all work fine for me, i just want confirm all)
I have downgrade to 4.0.6, after temp root and install sde, i've install again the 4.0.6. After i installed the 4.0.7 (delete the kernel) with root and 4.0.24 with root too.
And now the 4.0.25
Is that the correct step?!
Facebook Group
Archos 80 G9
JOIN US--REJOIN NOUS--JUNTA-TE A NÓS!!
https://www.facebook.com/groups/110090702484588/
---------- Post added at 09:34 AM ---------- Previous post was at 09:03 AM ----------
muti642 said:
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
Click to expand...
Click to collapse
beter for you make a clean install and reinstall all !!
In your situation i tried uninstall sde,.. format all and install the 4.0.6 official and do all step again (root, sde..)
in other words i tried a clean install!
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
HI
what's the best GOVERNOR for save battery duration??
Decided today to root and install SDE my new Archos g9 8gb and install this rooted rom, unfortunately as I had applied the standard 4.0.25 firmware there was an error when trying to install the SDE.
I tried returning to stock 4.0.7 but that now reports it is too old for my rom.
Looks like Ill be staying on the standard rom for some time yet lol
TrOjAn
****UPDATE****
Reading back I saw muti642 had the same issue, after trying the OLD outdated method I have now been able to install SDE and the latest rom.. thanks all
solrakk6 said:
HI
what's the best GOVERNOR for save battery duration??
Click to expand...
Click to collapse
Hi!
You do the right steps for install the last firmware 4.0.25 !
If you have problem with any app, please uninstall apk and try to reinstal from PlayStore!
Also you need to check what governor is the best on savebattery! , for sure is not hotplug!
Good luck!
TrOjAnUK said:
Decided today to root and install SDE my new Archos g9 8gb and install this rooted rom, unfortunately as I had applied the standard 4.0.25 firmware there was an error when trying to install the SDE.
I tried returning to stock 4.0.7 but that now reports it is too old for my rom.
Looks like Ill be staying on the standard rom for some time yet lol
TrOjAn
****UPDATE****
Reading back I saw muti642 had the same issue, after trying the OLD outdated method I have now been able to install SDE and the latest rom.. thanks all
Click to expand...
Click to collapse
Hi!
What was the problem?
probleme is
surdu_petru said:
Hi!
You do the right steps for install the last firmware 4.0.25 !
If you have problem with any app, please uninstall apk and try to reinstal from PlayStore!
Also you need to check what governor is the best on savebattery! , for sure is not hotplug!
Good luck!
Hi!
What was the problem?
Click to expand...
Click to collapse
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
thought about reinstalling via playstore..
about battery save.. i will try thx again!
muti642 said:
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
Click to expand...
Click to collapse
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
solrakk6 said:
thought about reinstalling via playstore..
about battery save.. i will try thx again!
Click to expand...
Click to collapse
I had similar problems with some applications google owner, and I resolved by reinstalling ! :good:
( also for full compatibility please , first use English to see if is there some issue ! )
The best Governor for our tablet seems to be hotplug, is the only one who knows how to manage both processor cores !
...also you can take a look here ( Android CPU governors explained ! )
surdu_petru said:
Hi!
Hi!
What was the problem?
Click to expand...
Click to collapse
The problem was error 221 or 223 depending on where I was and what I was doing.. basically::
On a NON rooted Archos 8gb 101 I updated to the official 4.0.25 (which worked) and then I wanted to install SDE / Root.
I was unable to do either using the newest ( link here ) method but the OLD method ( link here ) worked, that then allowed me to install SDE and then a custom rom.
On a side note: Can anything be done to improve the audio volume? When I watch a movie I have to use earphones as the speaker volume is too low?
TrOjAn
surdu_petru said:
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
the problem was only after doing the update from 4.0.24 to 4.0.25 installing the SDE was no longer possible error code 221.
to solve it took Roote and install the sde of the old method (with adb), I have the install your room.
Click to expand...
Click to collapse
muti642 said:
surdu_petru said:
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
the problem was only after doing the update from 4.0.24 to 4.0.25 installing the SDE was no longer possible error code 221.
to solve it took Roote and install the sde of the old method (with adb), I have the install your room.
Click to expand...
Click to collapse
Ok !
I understand :good:
...but, I do not understand, why you need to reinstall SDE - as long as SDE does not uninstall single, after you perform a new update ....
Click to expand...
Click to collapse
just litle question.
Imagine now i run 4.0.25 root from surdu ... tomorrow i want restore all to the latest official firmware ..
Just need delete sde menu
format all and put the file to update?! and voila.. It's easy like that?!
I dont want comeback.. i like too much this version and rooted better still !!
just for knowledge
Congatulations for your work surdu without you was impossible have a clean stock rooted rom.