[Q] Xperia X8 is dead.. PLEASE HELP.. :( - XPERIA X8 Q&A, Help & Troubleshooting

My X8 is totally dead after flash Stock 2.1 Firmware, using flashtool.
I couldn't turn it on, and couldn't get into CWM.
PC can't detect it, so I can't use Flashtool to fix it.
It can't be charged, no LED blink, NO RESPONS at all..
It has been successfully unlocked before, and there's no problems arise, flash kernel, flash firmware, it worked fine until I get it back to stock firmware.
Somebody help me please.. :crying:
Any idea to solve it?? beside using jtag..
thank you before..
(sorry for my english)

Charge it.

If you can't repair it with flashtools then I would recommend you to take it to Sony...
Also it may be possible that the battery of your phone is finished so better leave it connected to charger for few minutes and see whether it turns on..

dagger said:
If you can't repair it with flashtools then I would recommend you to take it to Sony...
Also it may be possible that the battery of your phone is finished so better leave it connected to charger for few minutes and see whether it turns on..
Click to expand...
Click to collapse
i had tried to connect it to charger for 4 hours.. but still it didn't turn on.
the battery logo didn't pop up, the LED was not light up..
I had used my friends x8 battery that fully charged, but it had a same reaction, no respons..
what am I supposed to do..?

try some other x8 battery:cyclops:

just take it to sony straightaway...

fotak-x said:
try some other x8 battery:cyclops:
Click to expand...
Click to collapse
I had tried other x8 battery.. but its still dead..

dagger said:
just take it to sony straightaway...
Click to expand...
Click to collapse
hmm..
maybe thats my last hope if all of alternatives can't wake my x8 up..
thank you for advice..

Related

[Q] My X8 bricked?

Maybe someone can help me, I installed a new firmware(MiniCM7 2.1.5) on my X8 in CWM. After the reboot the screen stays permanent on 'Sony Ericsson'. I even can not come in CWM anymore. Can somebody help me with this? Thanks!
edit : I even can not put it off anymore, it stays on the Sony Ericsson screen, the only thing I can do is disconnect the battery
Pierre118 said:
Maybe someone can help me, I installed a new firmware(MiniCM7 2.1.5) on my X8 in CWM. After the reboot the screen stays permanent on 'Sony Ericsson'. I even can not come in CWM anymore. Can somebody help me with this? Thanks!
edit : I even can not put it off anymore, it stays on the Sony Ericsson screen, the only thing I can do is disconnect the battery
Click to expand...
Click to collapse
use SEUS or PCC
and follow simpe steps
i got ur problem just a few minutes ago ...i just remove the battery a few times untill the phone comes alive ( it walks )
tohno said:
i got ur problem just a few minutes ago ...i just remove the battery a few times untill the phone comes alive ( it walks )
Click to expand...
Click to collapse
*surgery room*
HES ALIVEEE!! HES ALIVEEE!
He can finally walk again!
Leave a thanks if I helped!
nelikp said:
use SEUS or PCC
and follow simpe steps
Click to expand...
Click to collapse
Both SEUS and PCC don't work. They don't see the phone when I connect it with the USB. The phone 'hangs' when the 'Sony Ericsson' words appear on the screen after I put on the phone. I don't even can switch it off, only when I get the battery out. Anybody who can help me with this?
edit : After several times it worked! Thanks Nelikp
Use flashtool,it will work.
Sent from my X8 using Tapatalk
Downlaod FlashTool then download 2.1 Rom Stock u have it on forum install Gordon Gate driver from folder of flashtool then turn on phone when u it freeze connect USB a press flash and find ur stock rom .ftf-unplug phone-remove battery wait for 20 sec-put battery -press back button-plug usb
My X8 is fully working again. Thank you all for your help!
Pierre118 said:
My X8 is fully working again. Thank you all for your help!
Click to expand...
Click to collapse
th8 mean u already kill your device and give it live again??
nelikp said:
th8 mean u already kill your device and give it live again??
Click to expand...
Click to collapse
Yes, I did!
for mini cm7 you need nAa kernel
Sent from my E15i using XDA App
happened with me too now, cant turn it on....even battery remove for several times didnt work any other suggestions?
http://forum.xda-developers.com/showthread.php?t=1363573
And use flashtool bro
Sent from my X8 using Tapatalk

Flashed X8 using X10 FTF from flashtool

Hi all!
I did a big mistake some days ago.... I was updating my X8 from GingerDX 28 to 29 and some problem occured that my X8 didn't boot anymore, so I tried to flash with SEUS and PC Companion to get back the original ROM... But they doesn't work either. So I tried to start again, but this time I did some stupid, I used the X10 ftf from Flashtool to flash my X8!!! After that, it doesn't turn on, dont even light the LED when charging or connected using USB to PC. If a press turn on button in the top, it doesn't do anything and doesn't vibrate... Connecting using USB, windows doesn't identify that my X8 is there...
What can a do? Did I kill my X8?!?!?
Sorry my english...
Mauricio
I think you hard bricked your x8, because no response to on button is sign of hard bricking.
mujeeb999 said:
I think you hard bricked your x8, because no response to on button is sign of hard bricking.
Click to expand...
Click to collapse
What I can do now? It means that there's no solution?
You either hard bricked it(I don't think so) or its just out of battery.
Charge it for an hour and flash the x8 ftf this time
stamatis said:
You either hard bricked it(I don't think so) or its just out of battery.
Charge it for an hour and flash the x8 ftf this time
Click to expand...
Click to collapse
I already charge it for 5 hours, and I also changed the battery, but the same thing happens.... I used the battery in another phone and its working...
mauvalente said:
I already charge it for 5 hours, and I also changed the battery, but the same thing happens.... I used the battery in another phone and its working...
Click to expand...
Click to collapse
Did you try to flash a x8 ftf?
mauvalente said:
Hi all!
I did a big mistake some days ago.... I was updating my X8 from GingerDX 28 to 29 and some problem occured that my X8 didn't boot anymore, so I tried to flash with SEUS and PC Companion to get back the original ROM... But they doesn't work either. So I tried to start again, but this time I did some stupid, I used the X10 ftf from Flashtool to flash my X8!!! After that, it doesn't turn on, dont even light the LED when charging or connected using USB to PC. If a press turn on button in the top, it doesn't do anything and doesn't vibrate... Connecting using USB, windows doesn't identify that my X8 is there...
What can a do? Did I kill my X8?!?!?
Sorry my english...
Mauricio
Click to expand...
Click to collapse
You HardBrick your X8. only repairable via JTAG. you can send it to repair shop or on xperia repair
Try flashing x8 ftf file through flashtool
rmgaikwad said:
Try flashing x8 ftf file through flashtool
Click to expand...
Click to collapse
No flash mode-.-
wanna thank xda? here
zenesis said:
You HardBrick your X8. only repairable via JTAG. you can send it to repair shop or on xperia repair
Click to expand...
Click to collapse
Your right. The only way to fix it is using JTAG. I sent to a repair shop, they did the magic! Now it is in the way back from the shop by post mail. When I get it I will tell here if it's ok.
Thank all for the replays!
mauvalente said:
Your right. The only way to fix it is using JTAG. I sent to a repair shop, they did the magic! Now it is in the way back from the shop by post mail. When I get it I will tell here if it's ok.
Thank all for the replays!
Click to expand...
Click to collapse
Yes! Now it's working. Only JTAG could do the magic! Thanks all for help!!!!!!
hI!!!!
got a question
how much did it cost???
imean JTAG
Sent from my X8 using Tapatalk 2
ali avenger said:
hI!!!!
got a question
how much did it cost???
imean JTAG
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
R$ 60,00 -> Brasilian money
Make FTF Dump From X8
Can anyone tell me if there is a way to create a dump from a X8 that is currently in use, with the phones complete data (apps + info + settings )
in effect, a nandroid for use with Flashtool ?
I am thinking of using this method in replacement of nandroids because of the recovery being stored in the system partition and I have had problems with them before - usually MD5 mismatch errors.
you have hard bricked your phone !
goudaniket said:
you have hard bricked your phone !
Click to expand...
Click to collapse
No?
I am looking at flashtool as a replacement to nandroid backup??
You can make flashtool .sin/.ftf files from nandroid backups. But these flashtool packages will work only with unlocked bootloader/patched loader, because you can make the .sin headers but can't reproduce the security signatures, so with locked bootloader better if you forget it...
Sent from my LT18i using xda app-developers app
pilu1978 said:
You can make flashtool .sin/.ftf files from nandroid backups. But these flashtool packages will work only with unlocked bootloader/patched loader, because you can make the .sin headers but can't reproduce the security signatures, so with locked bootloader better if you forget it...
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Thanks pilu1978
I tried unlock bootloader before, using the main guide on here, but it kept bricking ?
The build is lower than the number advised to not use so I don't know what happened. I just had to keep trying, then recovering with SEUS.
Any help mate would be amazing as I am sick of being stuck on Stock 2.1-update1 and stock kernel, it limits the phones abilities so much!! argh!
hey
flash naa kernel for x8
stylo3 said:
flash naa kernel for x8
Click to expand...
Click to collapse
Me?

Stuck on green led (flash mode)

Guys,
I have flashed 2 or 3 times my lt30p with different lt30p official roms but i still cant pass trough the green led (flash mode).
for a minut or 5 i have a red led and than it is going in flash mode.
I have already reset the memory chip and try every thing in the first post from http://forum.xda-developers.com/showthread.php?t=1849170
Can somebody help me to get out of this?
cheers
samm000 said:
Guys,
I have flashed 2 or 3 times my lt30p with different lt30p official roms but i still cant pass trough the green led (flash mode).
for a minut or 5 i have a red led and than it is going in flash mode.
I have already reset the memory chip and try every thing in the first post from http://forum.xda-developers.com/showthread.php?t=1849170
Can somebody help me to get out of this?
cheers
Click to expand...
Click to collapse
so you have tried using flashtool in flashmode to flash a stock ftf file? if so I think its a sony repair my friend.
bruce1x said:
so you have tried using flashtool in flashmode to flash a stock ftf file? if so I think its a sony repair my friend.
Click to expand...
Click to collapse
Not. Exact, first i had problems with the rom i could not use ti without a charger.
Then i wasnt at home zo THE battery was drain to 0% and i could not. start iT up.
Zo i tried other Roms to solve My problem, now im still stuck on THE same problem
THE Phone is stuck in flashmode. Of someone knows à trick to help me pls.
samm000 said:
Not. Exact, first i had problems with the rom i could not use ti without a charger.
Then i wasnt at home zo THE battery was drain to 0% and i could not. start iT up.
Zo i tried other Roms to solve My problem, now im still stuck on THE same problem
THE Phone is stuck in flashmode. Of someone knows à trick to help me pls.
Click to expand...
Click to collapse
so is your battery dead, wont charge at all, will it hard reset.
bruce1x said:
so is your battery dead, wont charge at all, will it hard reset.
Click to expand...
Click to collapse
I have try hard reset but i can only do that when the phone is on charger.
I dont know if that make some difference?
samm000 said:
I have try hard reset but i can only do that when the phone is on charger.
I dont know if that make some difference?
Click to expand...
Click to collapse
I'm not sure about this one but if the phone was mine I would try to flash a stock kernel ftf with flashtool. it might be you flashed something bad and things got corrupted. and if the phone is stuck like this your phone will probably not charge, so the battery is dead. in which case you cannot flash an entire rom. try to flash only the kernel from this using flashtool. .
http://forum.xda-developers.com/showthread.php?t=2647207
if this works then place your phone on charge for a few hours.
then reflash the entire stock ftf.
if none of this works I'm not sure what else you can try. good luck!
bruce1x said:
I'm not sure about this one but if the phone was mine I would try to flash a stock kernel ftf with flashtool. it might be you flashed something bad and things got corrupted. and if the phone is stuck like this your phone will probably not charge, so the battery is dead. in which case you cannot flash an entire rom. try to flash only the kernel from this using flashtool. .
http://forum.xda-developers.com/showthread.php?t=2647207
if this works then place your phone on charge for a few hours.
then reflash the entire stock ftf.
if none of this works I'm not sure what else you can try. good luck!
Click to expand...
Click to collapse
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers
samm000 said:
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers
Click to expand...
Click to collapse
good news, nice to now how to fix this, happy modding my friend.
bruce1x said:
good news, nice to now how to fix this, happy modding my friend.
Click to expand...
Click to collapse
thnx bro
i hope i can help others to solve there problem to
cheers
samm000 said:
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers
Click to expand...
Click to collapse
I have had this exact same problem for months now and thought I tried everything. But I guess not.:good: Just wondering what you did after you completed the wiring on the battery. Did you charge it for a certain amount of time,before turning it on? Did you have to flash a stock rom? Any input would be very helpful. Thanks
WarSupport said:
I have had this exact same problem for months now and thought I tried everything. But I guess not.:good: Just wondering what you did after you completed the wiring on the battery. Did you charge it for a certain amount of time,before turning it on? Did you have to flash a stock rom? Any input would be very helpful. Thanks
Click to expand...
Click to collapse
I have first charge the battery till it wass fullcharged and than i have flashed a new rom

[Q] Completely Dead

Hi
what i did.
I unlocked the Bootloader via Flashtool
Rooted the device
Installed TW Recovery.
Installed iHackers 4.
All was fine until i saw the i wasnt connected to my Network Provider .
AHH i forgot to flash "Xperia Z1 - C6903 - Kernel + Baseband [14.3.A.0.757].ftf"
So i went into flashtool and flashed it, excluding everything execpt Kernel and Baseband.
The flashtool finshed and the device shut down. And thats it. Since then nothing. Not even
the led or something is showing any lifesignal. I tryed every button combi. The red reset button.
Tryed to enter flashmode.. NOTHING!!! What the ?! ANy ideas what i can do?
Last time i checked the accu was @ 93 %. I have it now on the charger dock hoping it is just a battery issue. No combination (pwr+vol+ or pwr+vol- etc.) working so far.
thanx
Thomas
TommyX235 said:
Hi
what i did.
I unlocked the Bootloader via Flashtool
Click to expand...
Click to collapse
What is this?
Did you Backup TA? Did you followed this instructions HERE?
If you did not, then you was asking for troubles.
eclyptos said:
What is this?
Did you Backup TA? Did you followed this instructions HERE?
If you did not, then you was asking for troubles.
Click to expand...
Click to collapse
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
TommyX235 said:
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
Click to expand...
Click to collapse
Yes it is a problem.
Even in this Tutorial is all well explained that you have to use the OFFICIAL Sony way to unlock Bootloader,
http://forum.xda-developers.com/showthread.php?t=2440597
..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right.
Maybe I am wrong but this is how supposed to be to avoid issues.
Then you phone is bricked and you have to follow other instruction to check if still can be resurrected, there is many Threads on XDA about this.
TommyX235 said:
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
Click to expand...
Click to collapse
Well if you want to sell it then I might want it as my screen got cracked
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
Hi
...
thanx
Thomas
Click to expand...
Click to collapse
Leave it on charge for 24 hours and then try turning it on.
Please let us know tomorrow if anything changes
eclyptos said:
Yes it is a problem.
Even in this Tutorial is all well explained that you have to use the OFFICIAL Sony way to unlock Bootloader,
http://forum.xda-developers.com/showthread.php?t=2440597
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
Maybe I am wrong but this is how supposed to be to avoid issues.
Then you phone is bricked and you have to follow other instruction to check if still can be resurrected, there is many Threads on XDA about this.
Click to expand...
Click to collapse
Wow i haven't thought that I get some nagging here instead of constructive suggestions. In any case i will let the phone on the charger for 24 hours and see if it helps. Also I DON'T THINK THIS IS A BOOTLOADER ISSUE!!! All worked fine.. I booted into ihackers 4 multiple times without any problems.. Also the Phone would show ANY signes of life, eg. LED RED or blinking etc..But nothing
ALSO:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
gregbradley said:
Leave it on charge for 24 hours and then try turning it on.
Please let us know tomorrow if anything changes
Click to expand...
Click to collapse
i'll give it a try! Thanx!
TommyX235 said:
Wow i haven't thought that I get some nagging here instead of constructive suggestions. In any case i will let the phone on the charger for 24 hours and see if it helps. Also I DON'T THINK THIS IS A BOOTLOADER ISSUE!!! All worked fine.. I booted into ihackers 4 multiple times without any problems.. Also the Phone would show ANY signes of life, eg. LED RED or blinking etc..But nothing
ALSO:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
Click to expand...
Click to collapse
Let us hear how it goes with it...
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
Click to expand...
Click to collapse
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
eclyptos said:
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
Click to expand...
Click to collapse
I don't understand what went wrong. After flashing the Kernel and Baseband the flashtool said everything went fine eand restarted the device. It turned off and nothing since then. I cant even get into flashboot or flashmode. It feels likt the accu is broken because there is nothing happening whatever i do. I think there is no power. I will not open the device because i still have 2 years of waranty (i hope they repair it as waranty case, if i am lucky) Else I will pay for the repair. We'll see. If this is an accu failure it should be a waranty case.
I had it for about 8 hours on the charger without any signs of "life" in the "machine". Sometimes i feel like trowing it against a wall to see if it reanimates it... But i can keep myself from doing it. =)
We'll see..
probably stupid guess: maybe ur phone just stucked on something and may not be completely switched off??
press vol+ and power button, see if ut vibrates 3 times
if it does, congrats an flash kernel again
TommyX235 said:
Hi
what i did.
I unlocked the Bootloader via Flashtool
Rooted the device
Installed TW Recovery.
Installed iHackers 4.
All was fine until i saw the i wasnt connected to my Network Provider .
AHH i forgot to flash "Xperia Z1 - C6903 - Kernel + Baseband [14.3.A.0.757].ftf"
So i went into flashtool and flashed it, excluding everything execpt Kernel and Baseband.
The flashtool finshed and the device shut down. And thats it. Since then nothing. Not even
the led or something is showing any lifesignal. I tryed every button combi. The red reset button.
Tryed to enter flashmode.. NOTHING!!! What the ?! ANy ideas what i can do?
Last time i checked the accu was @ 93 %. I have it now on the charger dock hoping it is just a battery issue. No combination (pwr+vol+ or pwr+vol- etc.) working so far.
thanx
Thomas
Click to expand...
Click to collapse
Is it getting red led when you try to charge it?
If not then its Sony's problem probably a faulty device. Send warranty and don't mention bootloader, root or ROM.
yup owns Z1 and stuff.
z1 completely dead
my z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply what to do next friends?
Hard reset.
Flash a stock FTF using flashtool.
If that does not work, leave it on charge overnight and try again tomorrow
gregbradley said:
Hard reset.
Flash a stock FTF using flashtool.
If that does not work, leave it on charge overnight and try again tomorrow
Click to expand...
Click to collapse
ok Dude i tried for flashing by pressing volume down button its not working .
while i try plug data cabel it will show blue led for a 2 seconds confirm its charging r i dont know? OK
I will try keeping overnight charge and i will try tomorrow. Thanks
---------- Post added at 09:20 PM ---------- Previous post was at 09:08 PM ----------
eclyptos said:
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
Click to expand...
Click to collapse
how to use Test pins procedure by opening back cover give me the details?
srichinu said:
how to use Test pins procedure by opening back cover give me the details?
Click to expand...
Click to collapse
There is no test point on 2013+ devices
Try again in the morning and let me know how you get on, I will help you then
gregbradley said:
There is no test point on 2013+ devices
Try again in the morning and let me know how you get on, I will help you then
Click to expand...
Click to collapse
Ok sir i kept for charge for more than 6 hours but i think nothing charged i tried by all methods by volume+ and on button,flash mode by connecting data cabel by pressing volume down as a flash but still it is in same condition. please advice me what to do next.
thanks?
Go through the process of flashing a FTF and please post the output of flashtool here.
Sony PC Companion
Have you try Sony PC Companion program?

[Q] XPERIA Z doesn't boot

Hi,
Last week i uncharged my SONY XPERIA Z to a very low battery level. After charging when i turned it on, it showed Sony logo and the led flashed but it didn't boot. I tried connecting it to PC but still nothing happens. Yesterday I was in the service, but the technician said that he cant undertake it and cant do anything with it. I dont know what he did, maybe he changed some of components but its still dead. Please help me guys!
vStr0ng3r said:
Hi,
Last week i uncharged my SONY XPERIA Z to a very low battery level. After charging when i turned it on, it showed Sony logo and the led flashed but it didn't boot. I tried connecting it to PC but still nothing happens. Yesterday I was in the service, but the technician said that he cant undertake it and cant do anything with it. I dont know what he did, maybe he changed some of components but its still dead. Please help me guys!
Click to expand...
Click to collapse
If it stucks on sony logo... U can flash a ftf with flashtool... This might fix the problem
I tried, the flashtool stucks at flashing system.sin
Are there other tools expect Sony PC Companion to flash software into xperias?
vStr0ng3r said:
I tried, the flashtool stucks at flashing system.sin
Are there other tools expect Sony PC Companion to flash software into xperias?
Click to expand...
Click to collapse
You can try -
XperiFirm tool
http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
After many excuses Flashtool 32-bit did it. The strange thing is that its still not booting. ehh, anyone?
Sent from my LG-P990 using XDA Free mobile app
vStr0ng3r said:
After many excuses Flashtool 32-bit did it. The strange thing is that its still not booting. ehh, anyone?
Sent from my LG-P990 using XDA Free mobile app
Click to expand...
Click to collapse
Re flash it with a right . ftf.....

Categories

Resources