Stuck on green led (flash mode) - Sony Xperia T, TL, TX, V

Guys,
I have flashed 2 or 3 times my lt30p with different lt30p official roms but i still cant pass trough the green led (flash mode).
for a minut or 5 i have a red led and than it is going in flash mode.
I have already reset the memory chip and try every thing in the first post from http://forum.xda-developers.com/showthread.php?t=1849170
Can somebody help me to get out of this?
cheers

samm000 said:
Guys,
I have flashed 2 or 3 times my lt30p with different lt30p official roms but i still cant pass trough the green led (flash mode).
for a minut or 5 i have a red led and than it is going in flash mode.
I have already reset the memory chip and try every thing in the first post from http://forum.xda-developers.com/showthread.php?t=1849170
Can somebody help me to get out of this?
cheers
Click to expand...
Click to collapse
so you have tried using flashtool in flashmode to flash a stock ftf file? if so I think its a sony repair my friend.

bruce1x said:
so you have tried using flashtool in flashmode to flash a stock ftf file? if so I think its a sony repair my friend.
Click to expand...
Click to collapse
Not. Exact, first i had problems with the rom i could not use ti without a charger.
Then i wasnt at home zo THE battery was drain to 0% and i could not. start iT up.
Zo i tried other Roms to solve My problem, now im still stuck on THE same problem
THE Phone is stuck in flashmode. Of someone knows à trick to help me pls.

samm000 said:
Not. Exact, first i had problems with the rom i could not use ti without a charger.
Then i wasnt at home zo THE battery was drain to 0% and i could not. start iT up.
Zo i tried other Roms to solve My problem, now im still stuck on THE same problem
THE Phone is stuck in flashmode. Of someone knows à trick to help me pls.
Click to expand...
Click to collapse
so is your battery dead, wont charge at all, will it hard reset.

bruce1x said:
so is your battery dead, wont charge at all, will it hard reset.
Click to expand...
Click to collapse
I have try hard reset but i can only do that when the phone is on charger.
I dont know if that make some difference?

samm000 said:
I have try hard reset but i can only do that when the phone is on charger.
I dont know if that make some difference?
Click to expand...
Click to collapse
I'm not sure about this one but if the phone was mine I would try to flash a stock kernel ftf with flashtool. it might be you flashed something bad and things got corrupted. and if the phone is stuck like this your phone will probably not charge, so the battery is dead. in which case you cannot flash an entire rom. try to flash only the kernel from this using flashtool. .
http://forum.xda-developers.com/showthread.php?t=2647207
if this works then place your phone on charge for a few hours.
then reflash the entire stock ftf.
if none of this works I'm not sure what else you can try. good luck!

bruce1x said:
I'm not sure about this one but if the phone was mine I would try to flash a stock kernel ftf with flashtool. it might be you flashed something bad and things got corrupted. and if the phone is stuck like this your phone will probably not charge, so the battery is dead. in which case you cannot flash an entire rom. try to flash only the kernel from this using flashtool. .
http://forum.xda-developers.com/showthread.php?t=2647207
if this works then place your phone on charge for a few hours.
then reflash the entire stock ftf.
if none of this works I'm not sure what else you can try. good luck!
Click to expand...
Click to collapse
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers

samm000 said:
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers
Click to expand...
Click to collapse
good news, nice to now how to fix this, happy modding my friend.

bruce1x said:
good news, nice to now how to fix this, happy modding my friend.
Click to expand...
Click to collapse
thnx bro
i hope i can help others to solve there problem to
cheers

samm000 said:
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers
Click to expand...
Click to collapse
I have had this exact same problem for months now and thought I tried everything. But I guess not.:good: Just wondering what you did after you completed the wiring on the battery. Did you charge it for a certain amount of time,before turning it on? Did you have to flash a stock rom? Any input would be very helpful. Thanks

WarSupport said:
I have had this exact same problem for months now and thought I tried everything. But I guess not.:good: Just wondering what you did after you completed the wiring on the battery. Did you charge it for a certain amount of time,before turning it on? Did you have to flash a stock rom? Any input would be very helpful. Thanks
Click to expand...
Click to collapse
I have first charge the battery till it wass fullcharged and than i have flashed a new rom

Related

Battery Temperature too low!! Charging problem

Hello people,
I have searched a lot on google en XDA to solve my problem, but i can't find it. The temperature of my Samsung Galaxy s GT-i9000 is to low, to be exact -7° degrees.
The problem is that i can't charge my phone now. The phone says: Charging paused. Battery temperature is too high or too low.
Can anyone help me, is would appreciate it a lot!
That's unusual to be honest ^^ , maybe if you put your phone ( or the battery ) in a worm place this problem will be solved , lol i can't even imagine what you've done to make it -7degrees ..
If the temperature of the phone is nrml and you're getting this msg for no reason u can reset it to factory settings , this will probably fix any software problems.
Good luck
i have reset a lot of times my factory settings. Do you have more solutions? (sorry for my English, i speak dutch) Thanks
did u flash any rom?
How old is your phone(battery)
Try a factory wipe,as suggested in the above post,maybe it's an app that caused the prob
I know for sure it's not my battery because had a other battery in it and it said the same. What i was forgotten to say was that my computer recognize my phone as a samsung galaxy, that is really strange. He doesn't want to charge.
Can you manage to get into recovery mode (by clicking vol up+home+power)? If you can, go to "advanced>wipe battery stats", and see if that fixes the problem.
did u flash any rom(kernel) if not,then I think your battery chipset is broken.
If u did flash any rom try format your system in recovery and flash a new rom first from cwm and if this doesn't fix then format again and flash a rom with Odin
Good luck
Yes i can it didn't work. Could a Kernel help me? Or has anyone have a link to rom which could help me?
Stock rom(jvu) get it from sammobile.com or search for darky's rom and flash this through ODIN.if u never tried odin then search and read how to use it
Thanks i'll try to install the darky rom. I tell you if it helps and when it doesn't i tell is also.
Have you flashed custom rom before? If yes try darky or something. If no is your phone still under warranty? If yes don' t flash anything and take it in. If no flash darky or other rom to see if you can resolve issue.
Sent from my GT-P7500 using Tapatalk 2
Thanx ,cos I never heard of this problem before,so it would be nice with a follow up
Hope u will get fixed.
Good luck m8
Sorry m8 it didn't work. I installed the darky rom and the problem is still there. I installed the Rom by CWM recovery. It couldn't work with odin
Could anyone help me with this problem?
Use darky's 10.2 TAR file this is flashable with Odin or any other .tar file.
@RAMAD rooted roms is tar and only flashed in Odin.search ramad
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
dubbelr said:
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
Click to expand...
Click to collapse
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
svein.berg said:
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
Click to expand...
Click to collapse
I'm having the same issue. It just started yesterday. Even with low use the phone gets hot and it won't let me charge it. I keep getting the battery temperature error. Even when it's powered off. I went into recovery mode as suggested by a previous poster and there is no advanced options that I can see. I'm not rooted and bone stock. Very frustrating. I've also tried another OEM battery to no avail.
HELP! http://forum.xda-developers.com/ima charging paused battery temperature too low
Hello guys, I get that message whenever I charge it or connect it to PC
my phone is galaxy s2 and the ROM is ICS 4.0.4
if anyone can help me. THanks
The problem is in the charge port flex it self. i work for a cell phone repair shop. i fix this issue all the time. its just a trac on the flex that goes bad. easy replacement fix. Here is a link to buy one.
http://www.ebay.com/itm/USB-Charge-...e_Replacement_Parts_Tools&hash=item3a841732e2

[Q]How to unbrick?

OK guys!
yesterday i cooked a ROM with dsixda's Android Kitchen.I also checked the updateR-script file to prevent any damage.
but the problem is :
ROM was flashed successfully and every single function worked. I just turned my phone off and it doesn't boot any more.
Any suggestions?
Is that a BRICK?
Thank you all in advance!:crying:
AriSLaSH said:
OK guys!
yesterday i cooked a ROM with dsixda's Android Kitchen.I also checked the updateR-script file to prevent any damage.
but the problem is :
ROM was flashed successfully and every single function worked. I just turned my phone off and it doesn't boot any more.
Any suggestions?
Is that a BRICK?
Thank you all in advance!:crying:
Click to expand...
Click to collapse
Can you get into Download/Recovery Mode? and what is it doing? Just black or showing the bootanimation? And btw you should have posted that in the q&a thread!
Try connect phone to charger and we will see.
thank you!
first i knew this should have been posted in Q&A but thought you guys can help me more.
my phone is showing a black screen and no response.
I just dont know what the hell has happened to this. It was working fine but ... you know the story!
I dont know if its a hard brick either. cuz nothing (just nothing) happened to the phone. No wrong flashing,ROM manager,...
just wanted to know what the should i do with this thing:crying::crying::crying:
You don't have flashed any kernel that's not for the i9001 right? If you have done that it's hard bricked. if not it's rescue-able
broodplank1337 said:
You don't have flashed any kernel that's not for the i9001 right? If you have done that it's hard bricked. if not it's rescue-able
Click to expand...
Click to collapse
The buttons is glowing when you touch it, while ex. you charge phone?
AriSLaSH said:
thank you!
first i knew this should have been posted in Q&A but thought you guys can help me more.
my phone is showing a black screen and no response.
I just dont know what the hell has happened to this. It was working fine but ... you know the story!
I dont know if its a hard brick either. cuz nothing (just nothing) happened to the phone. No wrong flashing,ROM manager,...
just wanted to know what the should i do with this thing:crying::crying::crying:
Click to expand...
Click to collapse
So, does download mode work or not?
1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it
If you cant boot phone anyway, that's Hard Brick...
AriSLaSH said:
1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it
Click to expand...
Click to collapse
Ans the qn man..there is no point of crying..can u goto diwnliad mode or not..provide useful info so ppl can help u...
Sent from my GT-I9001 using xda app-developers app
BTW - Do you even know, how to enter in download mode?... I know, that's stupid question but I must ask..
yeah I know what the hell is Download mode but if i can't turn this thing up,How can I get it to the download mode!
NO I CANT GET THIS THING IN THE DOWNLOAD MODE!!!!
AriSLaSH said:
yeah I know what the hell is Download mode but if i can't turn this thing up,How can I get it to the download mode!
NO I CANT GET THIS THING IN THE DOWNLOAD MODE!!!!
Click to expand...
Click to collapse
Relax man we are just trying to help
Sent from my GT-I9001 using xda app-developers app
i know that isn't the best thing i've ever said but you're sure that the battery isn't dead ?? it may happens but anyway it's weird ... you could meassure/verify it somehow
AW: [Q]How to unbrick?
Take battery out, wait 30 minutes Start Odin in your pc plug in the USB cable To the phone, press and hold the button Combo for download mode and take in the battery
sometimes this works, our phone is very hard To brick
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
AW: [Q]How to unbrick?
AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
follow My instructions ( post direct above yours) this Method helps many people ! AND STOP WRITING WITH CAPS, ITS LIKE SCREAMING AND NO ONE LIKE IT !
AW: [Q]How to unbrick?
AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
Which value of voltage does the multimeter show
Sent from my GT-I9001 using xda app-developers app
AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
Send my a link to your 'cooked' ROM, let me look at what you flashed... also, stay chill, we are trying to help you here.
Sent from my GT-I9001 using xda app-developers app
AriSLaSH said:
1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it
Click to expand...
Click to collapse
The first advice I can give to you is to take the battery out for overnight then put it back in.

Samsung Galaxy S3 mini is completely dead

Yesterday evening my phone was on the charger then it suddenly stopped and it is completely dead. It isn't showing any signs of life ever since, even if I charge it. It doesn't even show offline charging and I can't send it to Samsung as it's rooted so my warranty it VOID. It seems to me that it has Sudden Death Syndrome because it has been recently been switching off and now it's completely dead. What should I do? I'm pretty much screwed!
KoolKid98189 said:
Yesterday evening my phone was on the charger then it suddenly stopped and it is completely dead. It isn't showing any signs of life ever since, even if I charge it. It doesn't even show offline charging and I can't send it to Samsung as it's rooted so my warranty it VOID. It seems to me that it has Sudden Death Syndrome because it has been recently been switching off and now it's completely dead. What should I do? I'm pretty much screwed!
Click to expand...
Click to collapse
Can you enter download mode?
robintjeuuu said:
Can you enter download mode?
Click to expand...
Click to collapse
Well... I managed to just get it into offline charging. When I boot it up in normal mode it shows Samsung Galaxy S3 mini then after a few seconds the bottom lights flash for half a second and shut down. When I try to boot to recovery, model name then shut down. Yes it can just about make it into download mode.
KoolKid98189 said:
Well... I managed to just get it into offline charging. When I boot it up in normal mode it shows Samsung Galaxy S3 mini then after a few seconds the bottom lights flash for half a second and shut down. When I try to boot to recovery, model name then shut down. Yes it can just about make it into download mode.
Click to expand...
Click to collapse
If you get into download mode, go to sammobile en download the firmware for your phone and flash it with odin. if that worked, open stock recovery and do a fatory reset to make sure everything is back to stock... Then you can just hope it won't happen again.
robintjeuuu said:
If you get into download mode, go to sammobile en download the firmware for your phone and flash it with odin. if that worked, open stock recovery and do a fatory reset to make sure everything is back to stock... Then you can just hope it won't happen again.
Click to expand...
Click to collapse
I tried flashing stock recovery and ROM through Odin, it said pass but nothing actually seemed to fix and it still has the same problem that it shuts down after showing logo and when I boot to recovery it just shows TeamWin for a few seconds and shuts down so looks like I'm screwed and I have to use my BlackBerry :'(
KoolKid98189 said:
I tried flashing stock recovery and ROM through Odin, it said pass but nothing actually seemed to fix and it still has the same problem that it shuts down after showing logo and when I boot to recovery it just shows TeamWin for a few seconds and shuts down so looks like I'm screwed and I have to use my BlackBerry :'(
Click to expand...
Click to collapse
Ok, can't help you, maybe search this forum for unbrick device. I know there are fixes that can be used with some bricks.
robintjeuuu said:
Ok, can't help you, maybe search this forum for unbrick device. I know there are fixes that can be used with some bricks.
Click to expand...
Click to collapse
And I don't think Samsung will repair it as my warranty is void and I doubt if my parents would get me a new phone as this phone is only 3 months as well! And I have seen an unbrick thread and I tried it and it didn't work :'(
Well, I know how you feel. My charging port died once after I changed rom. Samsung asked me 200 for repair. Maybe you can give it a try and send him in... You never know Samsung loves you more than me..
Sent from my GT-I8190 using Tapatalk
robintjeuuu said:
Well, I know how you feel. My charging port died once after I changed rom. Samsung asked me 200 for repair. Maybe you can give it a try and send him in... You never know Samsung loves you more than me..
Sent from my GT-I8190 using Tapatalk
Click to expand...
Click to collapse
My dad took it to the service centre and they said they can't fix it as it's rooted so I'm screwed :'(
sunny296 said:
thanks,this index help me out very much.
Click to expand...
Click to collapse
What do you mean?
Zamoro1 said:
it is not samsung galaxy problem. it was your problem. you must close your downloading and other working while it is on charging.
Click to expand...
Click to collapse
It wasn't downloading anything?
Don't worry everyone I sent it to a repair shop (not Samsung) so I hope they manage to fix it.
Mine also dead
KoolKid98189 said:
Don't worry everyone I sent it to a repair shop (not Samsung) so I hope they manage to fix it.
Click to expand...
Click to collapse
Have you any news about the problem in your phone?
Mine (i8190 with one of the mclaws roms from previous week) also appeared in the morning shut down and there's no way of starting it. It does not even vibrate when power button pressed, as if the battery was completely empty.
Tried with another battery and checked that the original one had charge, but no luck. It does not start (normal, download or recovery, makes no difference).
Any ideas?
PelosBi said:
Have you any news about the problem in your phone?
Mine (i8190 with one of the mclaws roms from previous week) also appeared in the morning shut down and there's no way of starting it. It does not even vibrate when power button pressed, as if the battery was completely empty.
Tried with another battery and checked that the original one had charge, but no luck. It does not start (normal, download or recovery, makes no difference).
Any ideas?
Click to expand...
Click to collapse
Well mine was dead for a day then I plugged it into the charger (this was after a day and I left it on charge all night and it wouldn't start) and I held the power button for 10 seconds while it was on the charger it showed offline charging so I let it charge for a bit and then I powered it on and it seemed to be bricked so I sent it to a phone repair shop (not Samsung as my warranty is void). If it doesn't show any signs of life then it's bricked. If it comes to life then it is also probably bricked. I tried flashing many recoveries, ROMs, kernels and params and nothing happened.
In the S III Mini General forum there are topics about getting your phone back to stock so that it is covered by warranty.
james.faction said:
In the S III Mini General forum there are topics about getting your phone back to stock so that it is covered by warranty.
Click to expand...
Click to collapse
I tried to flash stock ROM and recovery but nothing actually worked!
1. Did you follow the instructions in detail?
2. What does "nothing actually worked!!" mean??
Maybe you need to work out what is the problem and why it is failing. Then you will be able to figure out if it is actually fixable, and if so how to fix it. "Trying everything" doesn't really work unless you make an effort to analyse the results you get every time you try something.
You could try posting in one of the threads about taking the phone back to stock. The people who posted them might be able to help you, they are more experienced at this sort of thing.
james.faction said:
1. Did you follow the instructions in detail?
2. What does "nothing actually worked!!" mean??
Maybe you need to work out what is the problem and why it is failing. Then you will be able to figure out if it is actually fixable, and if so how to fix it. "Trying everything" doesn't really work unless you make an effort to analyse the results you get every time you try something.
You could try posting in one of the threads about taking the phone back to stock. The people who posted them might be able to help you, they are more experienced at this sort of thing.
Click to expand...
Click to collapse
I tried those solutions and they didn't work.
Kid, can you read?
What did you try? What was the result?
"didn't work" isn't a result, it's you giving up. Without even trying to find out why it didn't work.
james.faction said:
Kid, can you read?
What did you try? What was the result?
"didn't work" isn't a result, it's you giving up. Without even trying to find out why it didn't work.
Click to expand...
Click to collapse
I read all instructions, and when I flashed it via Odin, nothing actually changed even with the params!

[Q] Completely Dead

Hi
what i did.
I unlocked the Bootloader via Flashtool
Rooted the device
Installed TW Recovery.
Installed iHackers 4.
All was fine until i saw the i wasnt connected to my Network Provider .
AHH i forgot to flash "Xperia Z1 - C6903 - Kernel + Baseband [14.3.A.0.757].ftf"
So i went into flashtool and flashed it, excluding everything execpt Kernel and Baseband.
The flashtool finshed and the device shut down. And thats it. Since then nothing. Not even
the led or something is showing any lifesignal. I tryed every button combi. The red reset button.
Tryed to enter flashmode.. NOTHING!!! What the ?! ANy ideas what i can do?
Last time i checked the accu was @ 93 %. I have it now on the charger dock hoping it is just a battery issue. No combination (pwr+vol+ or pwr+vol- etc.) working so far.
thanx
Thomas
TommyX235 said:
Hi
what i did.
I unlocked the Bootloader via Flashtool
Click to expand...
Click to collapse
What is this?
Did you Backup TA? Did you followed this instructions HERE?
If you did not, then you was asking for troubles.
eclyptos said:
What is this?
Did you Backup TA? Did you followed this instructions HERE?
If you did not, then you was asking for troubles.
Click to expand...
Click to collapse
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
TommyX235 said:
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
Click to expand...
Click to collapse
Yes it is a problem.
Even in this Tutorial is all well explained that you have to use the OFFICIAL Sony way to unlock Bootloader,
http://forum.xda-developers.com/showthread.php?t=2440597
..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right.
Maybe I am wrong but this is how supposed to be to avoid issues.
Then you phone is bricked and you have to follow other instruction to check if still can be resurrected, there is many Threads on XDA about this.
TommyX235 said:
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
Click to expand...
Click to collapse
Well if you want to sell it then I might want it as my screen got cracked
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
Hi
...
thanx
Thomas
Click to expand...
Click to collapse
Leave it on charge for 24 hours and then try turning it on.
Please let us know tomorrow if anything changes
eclyptos said:
Yes it is a problem.
Even in this Tutorial is all well explained that you have to use the OFFICIAL Sony way to unlock Bootloader,
http://forum.xda-developers.com/showthread.php?t=2440597
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
Maybe I am wrong but this is how supposed to be to avoid issues.
Then you phone is bricked and you have to follow other instruction to check if still can be resurrected, there is many Threads on XDA about this.
Click to expand...
Click to collapse
Wow i haven't thought that I get some nagging here instead of constructive suggestions. In any case i will let the phone on the charger for 24 hours and see if it helps. Also I DON'T THINK THIS IS A BOOTLOADER ISSUE!!! All worked fine.. I booted into ihackers 4 multiple times without any problems.. Also the Phone would show ANY signes of life, eg. LED RED or blinking etc..But nothing
ALSO:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
gregbradley said:
Leave it on charge for 24 hours and then try turning it on.
Please let us know tomorrow if anything changes
Click to expand...
Click to collapse
i'll give it a try! Thanx!
TommyX235 said:
Wow i haven't thought that I get some nagging here instead of constructive suggestions. In any case i will let the phone on the charger for 24 hours and see if it helps. Also I DON'T THINK THIS IS A BOOTLOADER ISSUE!!! All worked fine.. I booted into ihackers 4 multiple times without any problems.. Also the Phone would show ANY signes of life, eg. LED RED or blinking etc..But nothing
ALSO:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
Click to expand...
Click to collapse
Let us hear how it goes with it...
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
Click to expand...
Click to collapse
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
eclyptos said:
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
Click to expand...
Click to collapse
I don't understand what went wrong. After flashing the Kernel and Baseband the flashtool said everything went fine eand restarted the device. It turned off and nothing since then. I cant even get into flashboot or flashmode. It feels likt the accu is broken because there is nothing happening whatever i do. I think there is no power. I will not open the device because i still have 2 years of waranty (i hope they repair it as waranty case, if i am lucky) Else I will pay for the repair. We'll see. If this is an accu failure it should be a waranty case.
I had it for about 8 hours on the charger without any signs of "life" in the "machine". Sometimes i feel like trowing it against a wall to see if it reanimates it... But i can keep myself from doing it. =)
We'll see..
probably stupid guess: maybe ur phone just stucked on something and may not be completely switched off??
press vol+ and power button, see if ut vibrates 3 times
if it does, congrats an flash kernel again
TommyX235 said:
Hi
what i did.
I unlocked the Bootloader via Flashtool
Rooted the device
Installed TW Recovery.
Installed iHackers 4.
All was fine until i saw the i wasnt connected to my Network Provider .
AHH i forgot to flash "Xperia Z1 - C6903 - Kernel + Baseband [14.3.A.0.757].ftf"
So i went into flashtool and flashed it, excluding everything execpt Kernel and Baseband.
The flashtool finshed and the device shut down. And thats it. Since then nothing. Not even
the led or something is showing any lifesignal. I tryed every button combi. The red reset button.
Tryed to enter flashmode.. NOTHING!!! What the ?! ANy ideas what i can do?
Last time i checked the accu was @ 93 %. I have it now on the charger dock hoping it is just a battery issue. No combination (pwr+vol+ or pwr+vol- etc.) working so far.
thanx
Thomas
Click to expand...
Click to collapse
Is it getting red led when you try to charge it?
If not then its Sony's problem probably a faulty device. Send warranty and don't mention bootloader, root or ROM.
yup owns Z1 and stuff.
z1 completely dead
my z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply what to do next friends?
Hard reset.
Flash a stock FTF using flashtool.
If that does not work, leave it on charge overnight and try again tomorrow
gregbradley said:
Hard reset.
Flash a stock FTF using flashtool.
If that does not work, leave it on charge overnight and try again tomorrow
Click to expand...
Click to collapse
ok Dude i tried for flashing by pressing volume down button its not working .
while i try plug data cabel it will show blue led for a 2 seconds confirm its charging r i dont know? OK
I will try keeping overnight charge and i will try tomorrow. Thanks
---------- Post added at 09:20 PM ---------- Previous post was at 09:08 PM ----------
eclyptos said:
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
Click to expand...
Click to collapse
how to use Test pins procedure by opening back cover give me the details?
srichinu said:
how to use Test pins procedure by opening back cover give me the details?
Click to expand...
Click to collapse
There is no test point on 2013+ devices
Try again in the morning and let me know how you get on, I will help you then
gregbradley said:
There is no test point on 2013+ devices
Try again in the morning and let me know how you get on, I will help you then
Click to expand...
Click to collapse
Ok sir i kept for charge for more than 6 hours but i think nothing charged i tried by all methods by volume+ and on button,flash mode by connecting data cabel by pressing volume down as a flash but still it is in same condition. please advice me what to do next.
thanks?
Go through the process of flashing a FTF and please post the output of flashtool here.
Sony PC Companion
Have you try Sony PC Companion program?

Fasching Kernel + Baseband only - Phone dead!

Hi
i had paranoid android installed but the baseband was the wrong one..
(I installed iHackers 4.1 without flashing kernel + baseband because then i landed in a bootloop)
When on ihackers i installed paranoid android 4.4.4 over it and it worked. But also like in ihackers
i could not connect to my network because of the wrong baseband.
So i downloaded C6903_14.4.A.0.108_Generic_DE.ftf and flashed only the baseband without wiping anything..
Restarted .. baseband hasn't changed but the system booted and everything was fine.
Than i flashed only the kernel and the baseband without flashing anything else and wiping anything.
The phone went dead. Really dead. Power + vol+ which allways worked (3xvibrate) not working.
LED not working .. Just dead!!! i have it on the charger because before the last flashing it was @ about 15 - 20 % accu.
But even when i connect the charger .. no led .. nothing .. its playing dead.
Any Idea? (it is .. now that i remember .. not the first time a z1 went that dead on me.. I had a z1 before which did the same. now in retrospective I remember flashing kernel and baseband (ONLY) also on that phone.. and it went dead.
If somebody likes to trash his/her z1 try flashing only baseband and kernel. (I am sure the kernel and the baseband are the correct one for the firmware.)
Any ideas how to reanimate my z1?
vG
Thomas
You have flashed a stock kernel to a custom rom, so of course you will get a bootloop.
Solution, flash a stock FTF, after leaving the phone on charge for a few hours
and post your questions in the Q&A section
Cant get into flashmode or fastboot mode.. it does not react on any button combination
gregbradley said:
You have flashed a stock kernel to a custom rom, so of course you will get a bootloop.
Solution, flash a stock FTF, after leaving the phone on charge for a few hours
and post your questions in the Q&A section
Click to expand...
Click to collapse
Leave it for a few hours....
gregbradley said:
You have flashed a stock kernel to a custom rom, so of course you will get a bootloop.
Solution, flash a stock FTF, after leaving the phone on charge for a few hours
and post your questions in the Q&A section
Click to expand...
Click to collapse
gregbradley said:
Leave it for a few hours....
Click to expand...
Click to collapse
Thank you for your answer. =) I have unlearned to read messages till the end. Sorry =)
Have you tried the red button on the SIM tray slot?
Also refer to this thread:
http://forum.xda-developers.com/showthread.php?t=2574764
Poesini said:
Have you tried the red button on the SIM tray slot?
Also refer to this thread:
http://forum.xda-developers.com/showthread.php?t=2574764
Click to expand...
Click to collapse
yes .. i pushed it several times and also for ab 12 sec. nothing happens.
This happened to me when I first got my Z1. Unfortunately I had to send my phone back to Sony which they ended up replacing the motherboard.
They won't be able to detect any custom firmwares. Waiting time is unfortunately about 14 business days once they receive it...
If you phone is unlocked be sure to let them know so you get an nck unlock code. You will have a new imei.
khhhhris said:
This happened to me when I first got my Z1. Unfortunately I had to send my phone back to Sony which they ended up replacing the motherboard.
They won't be able to detect any custom firmwares. Waiting time is unfortunately about 14 business days once they receive it...
If you phone is unlocked be sure to let them know so you get an nck unlock code. You will have a new imei.
Click to expand...
Click to collapse
This is not a motherboard issue, it just needs charging for a few hours and then reflashing. Also he has lost his warranty due to unlocking so since this happened as a direct result of flashing custom roms he wont e able to claim on warranty
I understand this is not a motherboard issue, however the exact same problem happened to me months ago. Even after waiting overnight and trying to enter flash mode again it would not respond properly.
Sony's solution is to replace the motherboard at the repair facility I'm assuming because it is the easiest method.
I can almost guarantee this is what will happen when you send it in and they won't deny you warranty.
If you cannot get your phone into flash mode after a few hours, try again overnight. If not I would send it in, or get your carrier to replace it.
Repeat this magic phrase: "I updated my phone and it wouldn't turn on"
gregbradley said:
This is not a motherboard issue, it just needs charging for a few hours and then reflashing. Also he has lost his warranty due to unlocking so since this happened as a direct result of flashing custom roms he wont e able to claim on warranty
Click to expand...
Click to collapse
khhhhris said:
it.
Repeat this magic phrase: "I updated my phone and it wouldn't turn on"
Click to expand...
Click to collapse
Please do not condone fraud on XDA
Now you are deviating from the original intention of this thread. This is absolutely not fraud. It is a vague statement at best.
Your "Recognized Contributor" status and high post count does not give you authority to belittle other users.
Just trying to spread community support which is the purpose of xda, is it not?
Unsubscribed.
gregbradley said:
Please do not condone fraud on XDA
Click to expand...
Click to collapse
Well that excalated quickly...
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
yes .. i pushed it several times and also for ab 12 sec. nothing happens.
Click to expand...
Click to collapse
Did you try the guide posted there?
http://forum.xda-developers.com/showthread.php?t=2646405
Well you flashed a stock kernel on a CM based rom and thought it would work?
Don't come for Greg as he's the nicest member on here.
Need help
Hi,
I've run pac-rom on my Z1. Now I want to flash from the current .109 firmware only the base band. In Flash Tool under exclude everything except I labeled baseband. Then the flash process starts without error message. When I start the phone is still the old baseband version. What am I doing wrong?
Thank you
[email protected] said:
Hi,
I've run pac-rom on my Z1. Now I want to flash from the current .109 firmware only the base band. In Flash Tool under exclude everything except I labeled baseband. Then the flash process starts without error message. When I start the phone is still the old baseband version. What am I doing wrong?
Thank you
Click to expand...
Click to collapse
Maybe its the same baseband?
No,
old version is .39, and the new from .108 is .51
Hey thanks for your answers @ all!!
The failure was that i flashed roms / ftf with very low battery. Than i charged for a few hours and flashed again .. and on and on.
At some point the accu seems to got broken.
I send it to a repair facility used by sony and they confirmed that the accu is dead.
It seems that i get a replacement. (on warranty)
Thank you again. ! SO!!! What we learn from this is "Only flash your device when its charged!"

Categories

Resources