Hello people,
I have searched a lot on google en XDA to solve my problem, but i can't find it. The temperature of my Samsung Galaxy s GT-i9000 is to low, to be exact -7° degrees.
The problem is that i can't charge my phone now. The phone says: Charging paused. Battery temperature is too high or too low.
Can anyone help me, is would appreciate it a lot!
That's unusual to be honest ^^ , maybe if you put your phone ( or the battery ) in a worm place this problem will be solved , lol i can't even imagine what you've done to make it -7degrees ..
If the temperature of the phone is nrml and you're getting this msg for no reason u can reset it to factory settings , this will probably fix any software problems.
Good luck
i have reset a lot of times my factory settings. Do you have more solutions? (sorry for my English, i speak dutch) Thanks
did u flash any rom?
How old is your phone(battery)
Try a factory wipe,as suggested in the above post,maybe it's an app that caused the prob
I know for sure it's not my battery because had a other battery in it and it said the same. What i was forgotten to say was that my computer recognize my phone as a samsung galaxy, that is really strange. He doesn't want to charge.
Can you manage to get into recovery mode (by clicking vol up+home+power)? If you can, go to "advanced>wipe battery stats", and see if that fixes the problem.
did u flash any rom(kernel) if not,then I think your battery chipset is broken.
If u did flash any rom try format your system in recovery and flash a new rom first from cwm and if this doesn't fix then format again and flash a rom with Odin
Good luck
Yes i can it didn't work. Could a Kernel help me? Or has anyone have a link to rom which could help me?
Stock rom(jvu) get it from sammobile.com or search for darky's rom and flash this through ODIN.if u never tried odin then search and read how to use it
Thanks i'll try to install the darky rom. I tell you if it helps and when it doesn't i tell is also.
Have you flashed custom rom before? If yes try darky or something. If no is your phone still under warranty? If yes don' t flash anything and take it in. If no flash darky or other rom to see if you can resolve issue.
Sent from my GT-P7500 using Tapatalk 2
Thanx ,cos I never heard of this problem before,so it would be nice with a follow up
Hope u will get fixed.
Good luck m8
Sorry m8 it didn't work. I installed the darky rom and the problem is still there. I installed the Rom by CWM recovery. It couldn't work with odin
Could anyone help me with this problem?
Use darky's 10.2 TAR file this is flashable with Odin or any other .tar file.
@RAMAD rooted roms is tar and only flashed in Odin.search ramad
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
dubbelr said:
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
Click to expand...
Click to collapse
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
svein.berg said:
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
Click to expand...
Click to collapse
I'm having the same issue. It just started yesterday. Even with low use the phone gets hot and it won't let me charge it. I keep getting the battery temperature error. Even when it's powered off. I went into recovery mode as suggested by a previous poster and there is no advanced options that I can see. I'm not rooted and bone stock. Very frustrating. I've also tried another OEM battery to no avail.
HELP! http://forum.xda-developers.com/ima charging paused battery temperature too low
Hello guys, I get that message whenever I charge it or connect it to PC
my phone is galaxy s2 and the ROM is ICS 4.0.4
if anyone can help me. THanks
The problem is in the charge port flex it self. i work for a cell phone repair shop. i fix this issue all the time. its just a trac on the flex that goes bad. easy replacement fix. Here is a link to buy one.
http://www.ebay.com/itm/USB-Charge-...e_Replacement_Parts_Tools&hash=item3a841732e2
Related
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
First i would liik to charge phone for 24 hours and also check with another battery .
jje
JJEgan said:
First i would liik to charge phone for 24 hours and also check with another battery .
jje
Click to expand...
Click to collapse
The battery don't seem to be defected. Once the phone is booted with a cable connected, it goes without problems. It just will not boot without a charging signal.
Bump - Still actual
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
JJEgan said:
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
Click to expand...
Click to collapse
That happened to me a while back and I couldn't find a fix for it. Ended up doing the above and it resolved it.
Z3icon said:
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
Click to expand...
Click to collapse
i agree wiv the suggetions frnds given.galaxy is hard to brick.i did all sort of unusual things an even uptodate lol.don worri m8 jus flash to older stock and hard reset.check the connectivity pins,to b clean even the battri pins.somtimes its best u format ur eternal xd on pc an format.and giving another hard rest makes things better.i had once formated my int sd on pc and the phone had emptied,then i flashed and things worked fine.personally sticking to stock rom is better if u dont wan troubles,cause every custom rom has som drawback an needs a lil knownledge to tweak it up.check kies if ur on it,i recomend download the recovery driver in it.hope u get some help.cheeeerzzzz
Same here...
Hello everyone,
I too have the same issue as stated in the first post.
I even had issue sometimes that when boot up.
The USB notification icon wouldnt turn off even if i wasn't connected.
Some threads suggested that I clean the USB port, which i did and nothing changed, even if it looked a little bit dirty in there (Hard to say since it is really small).
Now the USB port looks just as new but same issue: I cant power on the unit witout having it connected with a power cord.
Also, when offline in download mode, Odin detect the unit and I can flash my device (Which I did yesterday by flashing UGJH2 re-partition and UGJL2 not re-partition) but when boot up, I can't make it to sync up with the computer. No sync possible (Also now I'm not rooted anymore).
The unit is under warranty but since it is unlocked with a tool that needed rooting to lock back, abviously I would need to be rooted again but to do it, I need to be able to sync it with my PC (No cant do here).
I have some engineer at work that offered me to check it out for me, they think it is related with the USB port, but I'm worried about the warranty seal. I found how to disasemble it but does anybody knows where it could be located on the I9000M from bell (Vibrant)? Does it have one?
Anybody have any better suggestion or a second opinion, please?
Its my 3rd Galaxy S from Bell and Samsung is now the last company I would think when buying a new mobile.
EDIT: Did the Block 2 Method and now it doesnt even want to boot at all (Did the JPY_JPY_JPY.tar part), now it shows the loading sign even faster and the battery doesnt even show it self at all.
Hello again people!
Got my friend engineers to open the phone and they didnt find anything that would cause my issue (Also no warranty label...).
Does anybody knows how to root a Galaxy S with Froyo without a PC?
I want to return my phone to Bell Canada under warranty but my phone is unlocked and I want to lock it back before sending it back and I need to be rooted to do so...
Thanks for your help!
I got the same problem here. Could someone tell me more on this. What is this Block 2 ODIN method?
this problem can be caused by water or sweat that got inside the case of your sgs.
the biggest hole in the case is micro-usb port) i think condensation accumulated there and locked some contacts.
try to disassemble the phone and carefully clean and dry it.
this helped me.
So the other day i was on my captivate and i had just factory reset it to original eclair. so i tried updating it with kies but it kept failing. So i then tried using Odin and accidently checked bootloader and now my phone turned off and wont show any signs of life. PLEASE IM ASKING YOU PLEASE HELP! What do I do?
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
4-2ndtwin said:
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
Click to expand...
Click to collapse
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Theboss14 said:
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Click to expand...
Click to collapse
It doesn't format the bootloaders per say, it you flash a stock ROM with Odin that has bootloaders and if it gets interrupted while it's replacing them, your phone will be bricked as it doesn't have a way to boot (hence the name bootloaders).
The JTAG service basically pushes the bootloaders into the phone. It's something we can't do on our own unless we have the right equipment (riftbox).
Like 4-2ndtwin mentioned, try to get some response from your phone, anything that would show life. That means you can recover on your phone. From there, you'd have to be able to get in download mode and flash Odin KK4 without ANY interruption.
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Theboss14 said:
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Click to expand...
Click to collapse
Try the button combo to get in download mode (could even try a jig). If that fails too, you'll have to get jtag service.
Sent from my SGH-I747 using xda app-developers app
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Theboss14 said:
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Click to expand...
Click to collapse
The only alternative I can suggest you is to find that service around your place, hopefully for cheaper.
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Theboss14 said:
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Click to expand...
Click to collapse
Kinda hard to know. look at the seller's rep Imo.
Samsung Captivate is dead, unable to go in download mode....
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Jtag. The only possible way out.
Sent from my GT-S5282 using xda premium
vishu_10d said:
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Click to expand...
Click to collapse
From what I've read in your thread, you had the i9000 image working, correct? If so, why not just roll with it?
All Captivate/i9000 rom works with the i9000 bootloader. Captivate GB Rom will need to get the 2.3.5 i9000 Music Player APK, but aside from that, it all works. AOSP roms like Cyanogenmod and Slimbean will work out of the box if you get the captivate version. To install them, you'll need a slight workaround though:
Flash a kernel with CWM.
From there, flash the Captivate Glitch Kernel V13. It only comes in .ZIP format, which is why you need a CWM kernel before hand
Flash CM7 to convert the partition table(IMPORTANT. Rom will not boot if you skip this step.)
Flash anything from here on. If it throw a status 7 about device not being SGH-i896/SGH-i897, etc..., flash the Glitch Kernel before attempting to flash the ROM. You do not need to flash CM7 again.
(I know other ROM should have converted the partition table, but in reality it doesn't. Since you're flashing from Glitch, a CM7/MIUI kernel, they assumes you already have the MTD partition layout, and only resize it instead of doing a full conversion. CM7 check the partition table regardless of which kernel you're flashing it from.)
As a plus, Deep Idle works only with the i9000 bootloader. You'll get sleep of death otherwise. If you want your ATT World Phone image back, you can flash the custom param.lfs and change it manually. This can only be done from Touchwiz ROM though.
After being careful on flashing ROM based on our valued friends instruction, my Note got bricked somehow.
Rom installed: Slim Beans 4.3 build 2 with Raw kernel R4.
Everything works fine and smooth until on time, when i was using the phone with 19% batt while charging the phone hang. It was not responding at all so i pressed and hold the power button until it power off. Then i removed the charge and change the battery from a spare fully charged batt. Now the phone won't turn on.
Note won't go to recovery nor download mode. Does not show that its charging as no charging icon show up. I have an external battery charge though so i'm sure that my spare battery is fully charged. I tried to blindly perform the download mode and connect to PC with Odin and its not recognized. Even tried the one-click unbrick but would not recognize the phone. Any idea what else i can try beside using USB Jig or JTAG?
I’ve read about sudden death issues or reserve battery being depleted but non of the solution worked.
Anything else i might have failed to try? Any advice is greatly appreciated.
No GT-N7000 screen also?
nokiamodeln91 said:
No GT-N7000 screen also?
Click to expand...
Click to collapse
Yes, nothing at all. it just died on me all of the sudden. I've never experienced even boot loop since flashing almost all sorts of ROM & kernel since CM 9 days, even jumping between TW/ASOP/CM/Miui roms. I've always been very careful in following the instructions reading since rooting my n7000.
now this happened. :crying:
Edit: And now i've read that they are about to release a Kitkat Omni ROM..
If there is no response from the phone at all.. then there could be board issues.. Try with a jig if possible. may be that can force the phone into download mode.. else repair center..
nokiamodeln91 said:
If there is no response from the phone at all.. then there could be board issues.. Try with a jig if possible. may be that can force the phone into download mode.. else repair center..
Click to expand...
Click to collapse
Yeah, that's my last resort. No choice then but have the board replaced.
Kitkat Omni ROM out!! I guess my flashing days are over.... for now... :crying:
Tonyboy09 said:
Yeah, that's my last resort. No choice then but have the board replaced.
Kitkat Omni ROM out!! I guess my flashing days are over.... for now... :crying:
Click to expand...
Click to collapse
Hmm.. I was looking to flash the same kernel with the new tech. Maybe look for help from the developer? On his topic was a guy who had the similar situation.
Looking to hear more from you on this.
ps. flashed the kernel once (r4) and the backlights were turning on and off (in settings were turned off), so i figured the kernel isn't supported. Slim Rc2
Well, i finally got a usb jig today and tried it on my n7000, it didnt work. Still no download mode for me, nothing. As i suspect this is already super bricked due to damaged mainboard.
The screen won't light up at all? When you are in a dark room, the screen isn't completely black, and that is the sign you need. It could be messed up partitions. Have you used pit file before?
drulo222 said:
The screen won't light up at all? When you are in a dark room, the screen isn't completely black, and that is the sign you need. It could be messed up partitions. Have you used pit file before?
Click to expand...
Click to collapse
Yes, won't light up at all not even in a dark room. I have not tried using a pit file before but would love to try it. The problem is i can't get it to download mode, not even with a jig. Tried connecting PC with Odin running thinking that i can do it blindly even without anything showing on the screen. The problem is that Odin can't recognize it.
Having trawled the net for a solution to this, i am interested to see if you have any luck with this, as my note did exactly the same yesterday, although mine is stock.
Completely gutted:crying:
Hello Community,
I'm new here and hope you can help me even if it is only a little bit
So I have a Samsung Galaxy S I9000 with stock rom 2.3.6, root rights and cwm flashed.
Before I did this I had some problems with my phone, e.g. if I hit (gently) the back side the phone turns off =/
My new at the moment real problem is that I cannot turn my phone on if I only use the battery. (onlly the Samsung logo appears for a short time)
I can only boot it if the phone is pluged into my computer. When it runs and the display turns off, the phone will go off also. (not instantly but atfter 2-5 minutes)
Does anyone knows something about such a problem?
Thanks for your help.
graphik_
p.s.: I am sorry for bad english =/
graphik_ said:
Hello Community,
I'm new here and hope you can help me even if it is only a little bit
So I have a Samsung Galaxy S I9000 with stock rom 2.3.6, root rights and cwm flashed.
Before I did this I had some problems with my phone, e.g. if I hit (gently) the back side the phone turns off =/
My new at the moment real problem is that I cannot turn my phone on if I only use the battery. (onlly the Samsung logo appears for a short time)
I can only boot it if the phone is pluged into my computer. When it runs and the display turns off, the phone will go off also. (not instantly but atfter 2-5 minutes)
Does anyone knows something about such a problem?
Thanks for your help.
graphik_
p.s.: I am sorry for bad english =/
Click to expand...
Click to collapse
Weird try a flashing a custom ROM while plugged into the computer maybe it will help.
Sent from my GT-I9000 using Tapatalk 2
Seems to me like a hardware problem.I guess battery is going to die soon.Try with another battery.
TheImpossibleEnemy said:
Seems to me like a hardware problem.I guess battery is going to die soon.Try with another battery.
Click to expand...
Click to collapse
I can exclude the battery. I have tested two of them and I can be sure that both are well because they work in another Galaxy S I9000 without problem.
To flash a custom rom with plugged phone into computer will be tested tomorrow.
graphik_ said:
I can exclude the battery. I have tested two of them and I can be sure that both are well because they work in another Galaxy S I9000 without problem.
To flash a custom rom with plugged phone into computer will be tested tomorrow.
Click to expand...
Click to collapse
Good luck:good:But I would suggest to flash stock gb rom first just to make sure its not a software problem.
I remember @xsenman has mentioned a solution for this problem about two months ago..... I am sure he will write you soon here.
I had the same problem with my phone, it would reboot if i tapped the back of it, i found out it was a dodgy app i installed so i uninstalled a couple of apps i recently installed and it solve the problem.
So know I have tryed to flash with connected phone. I do not know whether it works because the phone won't boot the system, only recovery and bootloader.
In cause of this I have reflashed with Odin again. Now I get at reboot this screen:
image: s29.postimg.org/bu61r7md3/PZv_PCPk_Txs5a_Xl_G_z1a22_Odgumodl7_HN6v_Ksy3_Q5_MNPm_s.jpg
sry but i cannot post direct links =/
I understand what there is written but I don't know why, the only sdcard is my internal there is no external connected.
So there is a new problem and I would be glad about new ideas =\
(I tryed: reboot, wipes and reboot, wipes and new flashing (same problem))
@tetakpatak if my system boots again I would search for his post thank you
Guys,
I have flashed 2 or 3 times my lt30p with different lt30p official roms but i still cant pass trough the green led (flash mode).
for a minut or 5 i have a red led and than it is going in flash mode.
I have already reset the memory chip and try every thing in the first post from http://forum.xda-developers.com/showthread.php?t=1849170
Can somebody help me to get out of this?
cheers
samm000 said:
Guys,
I have flashed 2 or 3 times my lt30p with different lt30p official roms but i still cant pass trough the green led (flash mode).
for a minut or 5 i have a red led and than it is going in flash mode.
I have already reset the memory chip and try every thing in the first post from http://forum.xda-developers.com/showthread.php?t=1849170
Can somebody help me to get out of this?
cheers
Click to expand...
Click to collapse
so you have tried using flashtool in flashmode to flash a stock ftf file? if so I think its a sony repair my friend.
bruce1x said:
so you have tried using flashtool in flashmode to flash a stock ftf file? if so I think its a sony repair my friend.
Click to expand...
Click to collapse
Not. Exact, first i had problems with the rom i could not use ti without a charger.
Then i wasnt at home zo THE battery was drain to 0% and i could not. start iT up.
Zo i tried other Roms to solve My problem, now im still stuck on THE same problem
THE Phone is stuck in flashmode. Of someone knows à trick to help me pls.
samm000 said:
Not. Exact, first i had problems with the rom i could not use ti without a charger.
Then i wasnt at home zo THE battery was drain to 0% and i could not. start iT up.
Zo i tried other Roms to solve My problem, now im still stuck on THE same problem
THE Phone is stuck in flashmode. Of someone knows à trick to help me pls.
Click to expand...
Click to collapse
so is your battery dead, wont charge at all, will it hard reset.
bruce1x said:
so is your battery dead, wont charge at all, will it hard reset.
Click to expand...
Click to collapse
I have try hard reset but i can only do that when the phone is on charger.
I dont know if that make some difference?
samm000 said:
I have try hard reset but i can only do that when the phone is on charger.
I dont know if that make some difference?
Click to expand...
Click to collapse
I'm not sure about this one but if the phone was mine I would try to flash a stock kernel ftf with flashtool. it might be you flashed something bad and things got corrupted. and if the phone is stuck like this your phone will probably not charge, so the battery is dead. in which case you cannot flash an entire rom. try to flash only the kernel from this using flashtool. .
http://forum.xda-developers.com/showthread.php?t=2647207
if this works then place your phone on charge for a few hours.
then reflash the entire stock ftf.
if none of this works I'm not sure what else you can try. good luck!
bruce1x said:
I'm not sure about this one but if the phone was mine I would try to flash a stock kernel ftf with flashtool. it might be you flashed something bad and things got corrupted. and if the phone is stuck like this your phone will probably not charge, so the battery is dead. in which case you cannot flash an entire rom. try to flash only the kernel from this using flashtool. .
http://forum.xda-developers.com/showthread.php?t=2647207
if this works then place your phone on charge for a few hours.
then reflash the entire stock ftf.
if none of this works I'm not sure what else you can try. good luck!
Click to expand...
Click to collapse
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers
samm000 said:
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers
Click to expand...
Click to collapse
good news, nice to now how to fix this, happy modding my friend.
bruce1x said:
good news, nice to now how to fix this, happy modding my friend.
Click to expand...
Click to collapse
thnx bro
i hope i can help others to solve there problem to
cheers
samm000 said:
thnx i already have try that, it didnt help me out.
But i have solved my problem now with bypassing the protection in the circuit of the battery link
problem solved phone is working and battery too
cheers
Click to expand...
Click to collapse
I have had this exact same problem for months now and thought I tried everything. But I guess not.:good: Just wondering what you did after you completed the wiring on the battery. Did you charge it for a certain amount of time,before turning it on? Did you have to flash a stock rom? Any input would be very helpful. Thanks
WarSupport said:
I have had this exact same problem for months now and thought I tried everything. But I guess not.:good: Just wondering what you did after you completed the wiring on the battery. Did you charge it for a certain amount of time,before turning it on? Did you have to flash a stock rom? Any input would be very helpful. Thanks
Click to expand...
Click to collapse
I have first charge the battery till it wass fullcharged and than i have flashed a new rom