I got unlock key from my operator and instructions to put in another operator's SIM. I should be asked for unlock key when I turn it on.
But nothing happens when I do that. I guess it is because I don't have original ROM.
I have MiniCM7-2.2.0 and nAa-11 kernel.
Any way to do this without going back to original ROM?
If I have to go backe do I need to revert back ROM and kernel or just one of those?
thank you!
If you try to return, you should flash both stock ROM and kernel (because the stock ROM doesn't work on custom kernel).
go to CWM make backup,on your pc repair phone with PCC than you should be able to unlock your phone.if you successed flash nAa kernel again,go to CWM and restore your backup
Related
I had stock kernel and 2.3.5 gingerdx, i unlocked my bootloader with seetoolsmc because i had my phone unlocked by se tool box and flashed kernel v003 and my phone didint want to start after gingerdx logo. Ok with PCC i restored to stock and my network was locekd again and my wi fi did not respond, i tried 100 ways and now when i start my phone without SIM card it's working, but when i put the SIM card in i enter my SIM pin and then the phone wont load anythinig, just the up tab and a blue theme Help?! I flashed stock kernel, 2.1 E15i_X8i_2.1.1.A.0.6_Baseband_015.7z and software but nothing
1. Flash stock kernel
2. Use SEUS to load stock rom
3. boot phone and wait
Then ur ready to go again:
1. root
2. flash new kernel
3. flash new rom
Read about GDX - it have some wifi issues..
I have FXP kernel+rom and no troubles.
I want to install CyanogenMod 7.1 on my X8 but am a little unsure. I have some questions...
i) Do I have to unlock the bootloader?
ii) Which CyanogenMod firmware is the best/most popular (pls give link)?
iii) In order to install the CM firmware are these the only steps I need to follow...
"1. Be sure to backup all your current data such as apps, contacts, messages etc before installing a custom ROM.
2. Transfer all the zip files needed to make the ROM work and the ROM itself on your SD card. We do this now because stock ROM won't boot up with a custom kernel.
3. Choose your kernel, download it and put the .ftf file in the "Firmwares" folder of Flashtool.
4. Open Flashtool.
5. Press the flash button. Make sure "flash mode" is selected and press OK.
6. Select the kernel you want to install and press OK.
7. Shut down your phone While holding the back button. Insert the USB cable.
8. Wait till the process has finished and remove the USB cable.
9. Boot up your phone and as soon as the kernel logo appears, start pressing the back button continuously multiple times till you get to CWM recovery. Now its time to flash the ROM.
10. Follow the instructions on the ROM's thread on how to install it.
11. Enjoy!"
Thank-You.
:
Unlocking bootloader only needed if you want to change the stock kernel to custom kernel, just remember that your phone should be rooted before have CWM or xRecovery..
I think GingerDx or GingerXperia is better just googling to find the rom.
MiniCm7 2.2.0 and GingerDx v026 r the best roms for me. I use MiniCm7 2.2.0 cuz it runs on nAa-11 or Alfs-Cm7 v8a and my phones WiFi works best with those kernels...
MiniCM7 2.2.0: http://forum.xda-developers.com/showthread.php?t=1362585
Its all there how to flash that rom...
most popular now are DX and PrimeHD.
I prefer the second because for me its FASTER and today PrimeHD v9 released!!! for all kernels CM 7.2 | Stock / nAa / Alfs
here is the link:
http://forum.xda-developers.com/showthread.php?t=1480404
You should considered GingerZakari too.Some experiance members report its a very fast rom
lets get Ice cream sandwich
Thanks for the reply everyone. I attempted to install GingerDX but failed big time! I didn't unlock the bootloader, I dont think I had to. I tried installing it by following the instructions, but I don't know what I did wrong, I failed at everything flashing/installing/wiping memory etc... I (nearly) killed my X8-it would show the Sony Ericsson boot image but not boot up. Luckily I restored the stock 2.1 Android by Sony Update Service.
I really am pissed off from this custom ROM cr*p and have given up .
But thx for helping me anyway.
maybe you cant try some ROMs like miniCM7 or GingerZaraki(use alfs)
after you unlock bootloader, you can flash the kernel to upgrade your phone.
so you must unlock BL to do everything
if you're not unlock BL you may brick your phone
After I failed I tried again , I done more research and found out about GingerDX, it didn't need unlocked bootloader and it worked on the stock kernal while providing GB. I got all the tools I needed and gave it a go; and after a few attempts I got it to work and now I am using it and it runs superbly, much better than (stupid) stock Eclair!
Thanks for the advice, I figured out that to run CM I need unlocked bootloader-I cannot unlock mine because it it network locked and there is no info on unlocking bootloader in service menu. But I am very happy with GingerDX!
ShinOrochiX said:
After I failed I tried again , I done more research and found out about GingerDX, it didn't need unlocked bootloader and it worked on the stock kernal while providing GB. I got all the tools I needed and gave it a go; and after a few attempts I got it to work and now I am using it and it runs superbly, much better than (stupid) stock Eclair!
Thanks for the advice, I figured out that to run CM I need unlocked bootloader-I cannot unlock mine because it it network locked and there is no info on unlocking bootloader in service menu. But I am very happy with GingerDX!
Click to expand...
Click to collapse
maybe if you still confuse with unlock your bootloader, try S1 tool man
read this. .
hope it can help solve your prob!
Hi,
I have some experience with ROMing but I really do only basic staff. First of all, info:
Device is SGS1, with an Israeli operator stock ROM (2.2), not rooted, not SIM free.
Never messed with an SGS before, only Atrix and used to doing everything easily with ROM Manager but on SGS I'm reading about Udin, flash stock before custom ROMs etc and decided to stop and ask...
Is it possible to simply, root, install ROM Manager, flash CWM recovery and get going (nandroid and full wipe before installation of course)? This is what I did on the Atrix (with the addition of unlocking the BL which I understood is not needed here)
Again, I just want basic ROM flashing the way I am used to with the Atrix
Thanks!
You can enter the recovery with the stock ROM. Power off your phone,then when its completely off,hold volume up+home key+power button then wait for the recovery to show up.
Not following you.
The device doesn't even have root. Is the BL really unlocked from stock? Is it ok to do everything with ROM Manager all the time as long as I do a full wipe?
mickeycohen said:
Not following you.
The device doesn't even have root. Is the BL really unlocked from stock? Is it ok to do everything with ROM Manager all the time as long as I do a full wipe?
Click to expand...
Click to collapse
The easiest way would be flashing a Gringerbred Firmeware that is alerady rooted.
Try and follow these instructions: http://www.darkyrom.com/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
After installing that Rom, your Phone will have unlocked BL, Root-rights and other Stuff You'll need for flashing.
Just give it a try you can use Rom Manager as well after following and flashing that Rom
Edit: If you flashed that custom Rom you are abel to flash all other Roms like these Stock Roms: http://forum.xda-developers.com/showthread.php?t=948790
Just read a while and don't forget to make Backups of your User Data and your EFS-Folder!!
Hi all
I have CM 10.2 and CWM recovery installed on my Z. Now I'm going to sell it and would like to "revert" to the stock ROM.
I realized that the Flash Tool by Bin4ry and Androxyde only works with stock, locked bootloaders so I cannot install original ROMs the "normal" way.
I assume I need to find a stock ROM image zipped in a format that is compatible with CWM recovery, and flash from there?
Thanks for all help
nope it should work with any Rom just download the ftf you want and flash it it would work with any Sony Device either Locked or Unlocked
Hi! Some months ago I flashed a kernel from here in XDA. The kernel was from Doomlord, to install CWM Recovery. But the device came into infinite boot. Then to solve it I flashed a stock rom (12.0.A.2.254) to see if the problem was solved..
Solved problem, the device came to normal (at least the infinite loop was solved).
But after flashing the Doomlord kernel, even flashing a stock rom, when I receive a message and visualize it, the LED stays turned on, and off only when rebooting. When I reboot the device, date/time are lost. The date in the top bar is updated only if I turn off the screen and then turn on again.
I tried reblock bootloader and repair from PC Companion. I tried flash the stock 4.3. I tried flash only the stock kernel. But nothing solves the problem.
Someone can help me?
Sorry for my english, I'm brazilian
You CANNOT relock bootloader while in custom kernel.
Unlock bootloader again, go in flashtool and flash the stock ftf, doom kernel isn't stable yet, use only stock or try another kernel...
lucasgta95 said:
You CANNOT relock bootloader while in custom kernel.
Unlock bootloader again, go in flashtool and flash the stock ftf, doom kernel isn't stable yet, use only stock or try another kernel...
Click to expand...
Click to collapse
Do you have the link to some kernel .elf that I can try to flash? If I unlock BL again and flash some stock .elf the problem could be solved?
Yes, but I recommend to flash a whole stock rom ftf after unlocking bl...
I passed through this situation too
lucasgta95 said:
Yes, but I recommend to flash a whole stock rom ftf after unlocking bl...
I passed through this situation too
Click to expand...
Click to collapse
I unlocked BL and flashed a stock (12.1.A.1.207). The problem continues. I tried too flash a stock 12.0.A.2.254 after unlock BL. In 4.1 the only problem is the date that is lost when rebooting. But flashing 4.3 stock all the previous problems continues. After receive messages, even if I read it, LED still on until I reboot the device. Date is lost after reboot, bla bla..
Maybe the problem is not the kernel that I flashed some months ago. What do you think? Some idea?
Guy, try this rom, and say if the problem continues
http://forum.xda-developers.com/xpe...nality-update-xperia-performance-max-t2895506
Unlock bootloader to use this rom
It is a great rom
If you don't like custom roms you can try the stock I'm using
http://forum.xda-developers.com/xperia-sp/general/ftf-12-1-1-207-generic-au-xperia-sp-t2856432