[Q] CPU frequency on Zeus 7.06 - LG Optimus Black

Hi guys
I recently flashed zeus v7.06 (coming from official ICS, I did all the 3 wipes but NO factory reset). The only change I made in 'zeus tweaker' was that I set min frequency to 200MHz and max Frequency to 800MHz. I monitor cpu stats via BetterBatteryStats app.
Now the only problem is that when the screen is on and I do regular stuff like writing a text message..., most of the time CPU works at the maximum frequency which is 800MHz causing battery drain very fast. I tried every governer in zeus tweaker but the same thing happens. I did no other change, no voltage tweaks, ram tweaks or I/O schedule.
Is it normal or there's sth wrong? Because I remember from older versions of zeus roms that when I set min freq to 200, then most of the time CPU used to work at min freq but now it works vice versa.
Thank you very much.

Related

[Q] The best setting for my phone

I just installed EliteV9.1 Beta ROM with Devil2_0.64 kernel and I9020a KF1 Radio for my SGS.
Now, what is the best setting for my phone to get greater autonomy of battery?
P.S. I didn't configure anything, I only installed!
can anyone help me
setting
1}flash KB3 modem.
2}install NS TOOLS.
3}then go to ns tools and in tweak set IO SCHEDULER TO sio AND ALSO SET STATUS off
4}now go in cpu setting n set Governor to smartassV2.
5}now set MIN CPU FREQ TO 2OO AND MAX CPU FREQ TO 1300.
6}for better battery install DX BATTERY BOOST AND SET MODE: LONG AND check on SMART.

Incredicontrol

We finally have root permissions, so i decided to try incredicontrol... anyone has already tried it?
I lowered the max freq up to 640MHz, and lowered the minimum freq up to the minimum (51MHz). The phone remains agile, no lags.
I noticed an improvement of the battery life, and the phone doesn't overheat like before.
The system uses more cores, not just one as with the base frequency.
I verified with the options "show cpu usage" in the hidden menù.
I suggest to use the interactive governor, because other governors don't use the shadow core.
We still cannot undervolt because there isn't a kernel that supports undervolt...
ps sorry for my bad english, but i'm italian
this app is simple, but unfortunaly it crashed for me to often, i use cpu master, set max speed to 1000 and min speed to 51mhz,
i think these tools are not full tegra3 rdy right now
fire3d said:
this app is simple, but unfortunaly it crashed for me to often, i use cpu master, set max speed to 1000 and min speed to 51mhz,
i think these tools are not full tegra3 rdy right now
Click to expand...
Click to collapse
mmm maybe.... maybe we have to wait new versions....... but on mine incredicontrol does not crash
CPU master
My CPU master doesn't (never) crash(ed) when i set max min CPU. Perhaps your app is buggy?

Optimus Black and overclocking

Ok guys I have installed Zeus v7 ROM and you all know there is application called ZeusTweaker which allow me to change CPU frequency. So my question for you is: on which frequency did you set your max and min value, when did you set that frequency and are there any significant improvement that you noticed? Did you noticed any problems? And finally and most important.. is it worth it?
hi, frequency min 300 - max 1300 , undervolted -3, bench OB with antutu before overclock and after for see score.
if you don't play , maybe overclock is not necessary, battery eats more when OB is overclocked

Kernel stock And Min free CPU with setcpu (rooted)

Hi
My s5 default frequency CPU are 300 Min And 2400 max.
I have root. stock rom And kernel. I have Read about clocking And if i increase CPU sped in its Min values The CPU should be more reactive. (i have stock kernel for mantain knox To 0x0 And i don.'t need a overclock up 2400 because 2400 is enought i think..) So, if i have 300 Min And 2400 max which Min value Can i set without problems? 400?652?728?or 883?
Now i have 883.. It' ok for CPU or i should have problems ? I Can set more than 883?if yes what CPU Min frequency could i set?
I have set when The Phone is charging or screen is off or calling The CPU turns To normal values (300 Min 2400 max).
The governor i use is stock interactive scheduler row.
I dov'è care about battery. If The change drop fastly is Not a problem for me. I want The Phone more reactive And responsi possible without problems on the CPU ecc..
Shouldn't have any problems, you might experience a bit more battery drain, that's about it. Sometimes when my screen is on, my phone automatically adjusts to 1190 as min, so I don't think you need to do anything.
Stock kernel, rooted
883 is too Hight or i Can set more? Like 960 or 1036 or 1190?i think more that 1190 is excessive.
In My experience when you open setcpu And do Nothing normally The CPU is 300.when you simply touch The screen it increase To 1190 so The 1190 i think is the minimal value of CPU when you use The Phone for operations. So maybe i think i could be ok if i set 1190.
Upp

Overclocking htc one m7

dear modders
i just want to say i overclocked my htc one m7 cpu from 1.7ghz to 2.1 GHZ
with a custom kernel called ElementalX-m7-22.3-Sense
is this save can the phone run this without any stability issue's or shall i downclock it to 1.9
i use M7_Sense7_artmod_10.0 rom Lolipop 5.0.2 with sense 7 cause this is the only one without any bugs like no sound when you got called or sms sound's no boot sounds
i fixed my boot sound anyway on this rom
so my question is wont my phone be fried by this overclock cause i saw in the aroma installer that it can be overclock till 3 GHZ
greets Rubenownz
Overclocking the CPU in any system usually results in 2 main things:
a. Significantly shorter battery life.
b. heating issues.
sometimes (less frequently) you might experience a crash and fc here and there.
So yeah, it won't be all rainbows and butterflies.
PS: you probably won't reap the benefits of your now overclocked CPU without an app like no frills CPU or kernel Aduitor. Your device's performance isn't just about its CPU frequency, there's the min Max frequency your system is allowed to utilize, the CPU governor, and the I/o scheduler..
and
PPS: don't and I repeat DO NOT go anywhere near 3 GHz.
good luck.
I'm runnimg 2.1 Ghz OC for over 2 years without any issues. I would like to note that 2.1 Ghz on Elemental was not too stable for me, so I ran that on 2.0 Ghz. Anyway - i don't have any issues with my kernel, no overheating, battery lasts 100% same as stock frequency, no reboots, everything works as it's ment to work. If you really want to run on that frequency, make sure you set your voltage table to match your CPU clocks. Undervolting is not a good idea on such high clocks, so you might want to raise your voltages for higher frequencies a bit
monrokhoury said:
Overclocking the CPU in any system usually results in 2 main things:
a. Significantly shorter battery life.
b. heating issues.
sometimes (less frequently) you might experience a crash and fc here and there.
So yeah, it won't be all rainbows and butterflies.
PS: you probably won't reap the benefits of your now overclocked CPU without an app like no frills CPU or kernel Aduitor. Your device's performance isn't just about its CPU frequency, there's the min Max frequency your system is allowed to utilize, the CPU governor, and the I/o scheduler..
and
PPS: don't and I repeat DO NOT go anywhere near 3 GHz.
good luck.
Click to expand...
Click to collapse
ok mate
yeah i could raise also min clocks might turn that a noch up
just was wondering if it was possible without any harms
there are now on 384mhz 1 core is always active and 3 others are sleeping aid64 tells me
the temps are now 29 celcuis for 2.1 ghz
donkeykong1 said:
I'm runnimg 2.1 Ghz OC for over 2 years without any issues. I would like to note that 2.1 Ghz on Elemental was not too stable for me, so I ran that on 2.0 Ghz. Anyway - i don't have any issues with my kernel, no overheating, battery lasts 100% same as stock frequency, no reboots, everything works as it's ment to work. If you really want to run on that frequency, make sure you set your voltage table to match your CPU clocks. Undervolting is not a good idea on such high clocks, so you might want to raise your voltages for higher frequencies a bit
Click to expand...
Click to collapse
yeaah the kernel has those options in aroma installer it set it safe i ques
ill post later some picture's of what ive been doing
good nites
here are some pictures of my sense 7 5.0.2 android system dump of htc one m9 for htc one m7 xD overclocked
some temps and cpu tweaks and ofc of the system (dont mind about the girl on the screenshot its my girlfriend not me iam a boy
btw i removed phone number on call menu cause it's private
Greets Rubenownz

Categories

Resources