[Q] The best setting for my phone - Galaxy S I9000 Q&A, Help & Troubleshooting

I just installed EliteV9.1 Beta ROM with Devil2_0.64 kernel and I9020a KF1 Radio for my SGS.
Now, what is the best setting for my phone to get greater autonomy of battery?
P.S. I didn't configure anything, I only installed!

can anyone help me

setting
1}flash KB3 modem.
2}install NS TOOLS.
3}then go to ns tools and in tweak set IO SCHEDULER TO sio AND ALSO SET STATUS off
4}now go in cpu setting n set Governor to smartassV2.
5}now set MIN CPU FREQ TO 2OO AND MAX CPU FREQ TO 1300.
6}for better battery install DX BATTERY BOOST AND SET MODE: LONG AND check on SMART.

Related

Best settings/frequencies for OC/UV Beater?

Hi there,
I'd like to overclock my IncS to 1,3 Ghz...
But I don't know the right settings.
Can you please tell me the right setting for best performance (e.g. oc to 1,3ghz) and best battery life?
thanks
does anybody know?
Set max to your desired, min to the lowest it will go and scaling to smartass.
I'm OCd to over 1.4 and no issues... UCd to 192 with smartassv2 governor
Sent from my Incredible S using XDA App
the best performance I have experienced in my INC is when I put oc / uv beater to the following:
wake gov: ondemand
wake mins: 245000
wake max: 1228800
Sleep gov: Conservative
my sleep: 245000
Sleep max: 691200
when I take a test in antutu nenchmark for I the following result.
score: 2729
If I clocked lower or higher, the result is lower
Overclocking depends entirely on your chip.
You should use whatever governor suits your needs.
I personally use ondemandx which speeds up on demand (as the name implies), conservative tries to keep the frequency as low as possible, interactive uses max frequency if min isn't enough, smartass is an improvement of interactive that keeps performance high while improving battery life (meaning there's little reason to use interactive).
You can find it in more detail here.
So basically, smartass if you want performance, conservative if you want battery life, ondemand if you want something in between. In reality though, I don't think you'll see much difference between them and I've seen no difference in idle power draws, so if you don't use your phone all that much, they won't be that different.
Once you've picked a governor, you should set min speed to 122000 (no reason to use any higher) and max to whatever you want. Your phone will probably crash or suffer from bad performance if you go over 1.5 GHz, but it varies a lot. Might happen even earlier.
Once you've found your desired performance level, you should start tweaking your voltages. You can do that under the UV profile. In there, you can adjust voltages at different speeds and the phone will automatically use them at whatever speed it's at. You should undervolt to increase battery life, so start by reducing all by 25 or 50 and then temp apply. Use it like that for a couple of hours and if it doesn't freeze, you're probably stable. You can either stop here or spend many hours tweaking it further, but that'll take many hours to get right.
This is my setting
Sent from my HTC Incredible S using xda premium
Which would be the best O/C program out there ?! I have SetCPU, Daemon but I'm sure there is better in the market...... just need to know the name so I can get it Thanks!
I'm currently 230MIN/1150MAX
Me4oKyX said:
Which would be the best O/C program out there ?! I have SetCPU, Daemon but I'm sure there is better in the market...... just need to know the name so I can get it Thanks!
I'm currently 230MIN/1150MAX
Click to expand...
Click to collapse
In my opinion, and I'm sure many others', Virtuous daemon is the best by far.
It comes standard in a lot of roms, and using the OC/UV beater
http://forum.xda-developers.com/showthread.php?t=1207546
it would have the best performance. I've set mine similar to yours and with this method, you can set the phone to underclock when battery reaches a low level

Abyssnote 3.2 and tegrak overclock ultimate

I am really confused about how this tegrak overclock app works. As suggested by angelom i gave up setcpu for tegrak but i can't seem to figure out a couple of things.
I am trying to get 100-1400 mhz with undervolting. So i chose the voltages i wanted, then chose max cpu frequency as 1.4 ghz.
Now heres the problem. In the optimization menu i now see cpu level 0 as 1400mhz as well as cpu level 3 as 1400mhz. Level 1 and 2 are still 1664 and 1600. Also the voltages for level 0 are the ones for 1704mhz.
Is tegrak setting my voltages for 1400mhz correctly? Because my phone seems to be running fine however low i set my lvl 3 1400mhz voltage. I even set it to 900mv and quadrant still ran. (Trying to alter voltages over level 3 causes the app to force close after i set max cpu freq to 1.4)
Either tegrak automatically reverts back to the original voltage when the system is unstable (in which case.. How would i know when this happens?) or something isn't working right.
I am on a stock kk3 rom.
Sent from my GT-N7000 using XDA App

Incredicontrol

We finally have root permissions, so i decided to try incredicontrol... anyone has already tried it?
I lowered the max freq up to 640MHz, and lowered the minimum freq up to the minimum (51MHz). The phone remains agile, no lags.
I noticed an improvement of the battery life, and the phone doesn't overheat like before.
The system uses more cores, not just one as with the base frequency.
I verified with the options "show cpu usage" in the hidden menĂ¹.
I suggest to use the interactive governor, because other governors don't use the shadow core.
We still cannot undervolt because there isn't a kernel that supports undervolt...
ps sorry for my bad english, but i'm italian
this app is simple, but unfortunaly it crashed for me to often, i use cpu master, set max speed to 1000 and min speed to 51mhz,
i think these tools are not full tegra3 rdy right now
fire3d said:
this app is simple, but unfortunaly it crashed for me to often, i use cpu master, set max speed to 1000 and min speed to 51mhz,
i think these tools are not full tegra3 rdy right now
Click to expand...
Click to collapse
mmm maybe.... maybe we have to wait new versions....... but on mine incredicontrol does not crash
CPU master
My CPU master doesn't (never) crash(ed) when i set max min CPU. Perhaps your app is buggy?

[Q] CPU frequency on Zeus 7.06

Hi guys
I recently flashed zeus v7.06 (coming from official ICS, I did all the 3 wipes but NO factory reset). The only change I made in 'zeus tweaker' was that I set min frequency to 200MHz and max Frequency to 800MHz. I monitor cpu stats via BetterBatteryStats app.
Now the only problem is that when the screen is on and I do regular stuff like writing a text message..., most of the time CPU works at the maximum frequency which is 800MHz causing battery drain very fast. I tried every governer in zeus tweaker but the same thing happens. I did no other change, no voltage tweaks, ram tweaks or I/O schedule.
Is it normal or there's sth wrong? Because I remember from older versions of zeus roms that when I set min freq to 200, then most of the time CPU used to work at min freq but now it works vice versa.
Thank you very much.

[Q] Good performance settings for P880 running CM 11?

Ive recently clean installed CM 11 and i expereince lag spikes once in a while.So i decided to change the performance settings of my phone. Could you reccommend a good max cpu speed/min cpu speed/CPU governor/I/o for speed and also battery saving .
Im curretly using ONDEMAND with max cpu speed at 1500hz ( the max value i have). Also will this affect my phone life and damage my phone by any way?
daksithj said:
Ive recently clean installed CM 11 and i expereince lag spikes once in a while.So i decided to change the performance settings of my phone. Could you reccommend a good max cpu speed/min cpu speed/CPU governor/I/o for speed and also battery saving .
Im curretly using ONDEMAND with max cpu speed at 1500hz ( the max value i have). Also will this affect my phone life and damage my phone by any way?
Click to expand...
Click to collapse
Stock kernels that come with custom ROMs are usually built for stability and some for battery life aswell so you can't really expect good performance from them.
Check mourta kernel out (the one I have link to in my signature).Flash it, I personally prefer to use 51 mhz min, 1.5 ghz max, ondemand governor, deadline i/o scheduler and I've set cpuquiet to userspace and hotplug is turned on.
Using this kernel with those settings, you'll get the best performance you can get out of your phone while keeping a good battery life.Since most kernels are slow to turn frequencies down or they do it in a way that causes lags.
You won't be able to change cpuquiet, hotplug settings until you get trickstermod.
We've got a 3.4 kernel made by mourta but it's vanilla (doesn't have some important patches etc.) but it should be complete in a few weeks.Better stick to 3.1.10 for the while
I recommend you to try mahdi rom, it's more stable than Cyanogenmod and iodak kernel is built-in.. http://forum.xda-developers.com/optimus-4x-hd/development/rom-mahdi-rom-2-7-unofficial-beta-t2867590
First you could flash the iodak kernel. Then you can overclock to 1700mhz. And use "performance" and "deadline" for the maximum.
Hope I helped you.

Categories

Resources