Database Develop

[Fastboot] Droid Razr M Xt907 Ice Cream Sandwich

DROID RAZR M XT907 Ice Cream Sandwich software update availability​
The following table is for reference only.
Country|Carrier Name|Android|System version
US|Verizon|4.0.4|Blur_Version.77.111.10.XT907.Verizon.en.US
BUILT PROPERTIES
build.id=7.7.1Q-144_SMQ_S136-10
build.version.release=4.0.4
build.date=Mon Aug 27 06:18:07 CDT 2012
Blur_Version.77.111.10.XT907.Verizon.en.US
Click to expand...
Click to collapse
Click to expand...
Click to collapse
1. 7.7.1Q-144_SMQ_S136-10 - Verizon
Source: http://www.droidevelopers.com/showt...e-Cream-Sandwich-software-update-amp-download

mine tried to update today, it wouldn't go through. Also when I try to reboot into recovery I'm having issues there, just doesn't want to do it... anyone know why?

Are you pressing all physical buttons then scroll with v down select with v up then press both v buttons at red android screen then select file from SD and apply
https://www.youtube.com/watch?v=6efI1iGAgsU&feature=youtube_gdata_player
Video link to most of process from my YouTube
Sent from my XT907 using xda app-developers app

I missed the step about both v keys at the M, I'm getting it to work now, except I can't find the file. I know its there, can go look at it in the file explorer, but can't find it in recovery.

Did you move it to your SD card it goes to your internal first not external which is where it has to be also did you rename to update.zip?
Sent from my XT907 using xda app-developers app

I apologize if this is something obvious, but when I try and run this through rsdlite (5.7 and 5.9) on my retail M running the JB leak, it immediately fails and says "Failed flashing process. Unknown fastboot command. (getvar)".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Got it, didn't know it wasn't downloaded to my external memory. Its all good now, thanks!

Got it to work by removing the getvar line in the xml (per mattlgroff, no way I would've tried that myself) - works perfectly from the JB leak, thanks again for this!

Just to be clear, is the the stock ROM that came with the RAZR M? That way people could try out the JB leak, and then use this to revert back. Since there isn't a way to install CWM and do a backup.

FAUguy said:
Just to be clear, is the the stock ROM that came with the RAZR M? That way people could try out the JB leak, and then use this to revert back. Since there isn't a way to install CWM and do a backup.
Click to expand...
Click to collapse
Correct, on the current leak anyway. Obviously if you have to do this your data will be wiped as well.

jntdroid said:
Correct, on the current leak anyway. Obviously if you have to do this your data will be wiped as well.
Click to expand...
Click to collapse
But the only way you could get it to work was by removing the getvar line in the XML?

FAUguy said:
But the only way you could get it to work was by removing the getvar line in the XML?
Click to expand...
Click to collapse
That's the only way mine would work - rsdlite wouldn't go past that.

Use RSD Lite 6.1.4

When using RSD Light, does the phone have to be in normal "power on" mode, or in a special "download" mode for RSD to install the files?

FAUguy said:
When using RSD Light, does the phone have to be in normal "power on" mode, or in a special "download" mode for RSD to install the files?
Click to expand...
Click to collapse
AP Fastboot - from powered off, hold down volume-up AND volume-down, then while holding those, press and hold the power button until you see a menu pop-up that's simply white text on a black background. Once that comes up, use volume-down to move down to AP Fastboot, and volume-up to select it. Then plug it into your computer, fire up rsdlite (6.1.4! ), open the file linked in the OP, and go!
Sent from my XT907 using Tapatalk 2

Ok, thanks.
I've posted the files and instruction here:
http://www.phonearena.com/news/How-to-restore-your-Motorola-DROID-RAZR-M-back-to-stock_id35580
If anything needs editing, let me know.

FAUguy said:
Ok, thanks.
I've posted the files and instruction here:
http://www.phonearena.com/news/How-to-restore-your-Motorola-DROID-RAZR-M-back-to-stock_id35580
If anything needs editing, let me know.
Click to expand...
Click to collapse
Credits Firmware Team?
Enviado desde mi HTC Sensation XE with Beats Audio Z715e usando Tapatalk 2

help im stuck
ok so i messed with the build.prop and cant get the original one in through adb, i tried flashingjust system img thru fastboot but the file is too big just error after error with cmd prompt...
so i downloaded stock firmware per phonearena link, and i have rsdlite 6.1.4 installed as well as all the latest drivers, it fails on step 1 "gpt_main0.bin" so i removed that line from xml and tried again, it got further but failed at fsg.mbn
i dont know what to do, i figure if all i need is a good build.prop i should have rsd flash just the system.img but that doesnt work either...
i don't know what to do? any suggestions, or ideas?
---------- Post added at 08:11 PM ---------- Previous post was at 07:30 PM ----------
ok i solved it, nevermind

tadgerloks said:
ok so i messed with the build.prop and cant get the original one in through adb, i tried flashingjust system img thru fastboot but the file is too big just error after error with cmd prompt...
so i downloaded stock firmware per phonearena link, and i have rsdlite 6.1.4 installed as well as all the latest drivers, it fails on step 1 "gpt_main0.bin" so i removed that line from xml and tried again, it got further but failed at fsg.mbn
i dont know what to do, i figure if all i need is a good build.prop i should have rsd flash just the system.img but that doesnt work either...
i don't know what to do? any suggestions, or ideas?
---------- Post added at 08:11 PM ---------- Previous post was at 07:30 PM ----------
ok i solved it, nevermind
Click to expand...
Click to collapse
PLEASE post what you did to fix this issue as it may creep up again for someone else. These posts I run into every so often on google asking a problem and then all I see is "fixed it" no solutions posted. =) thanks!

I deleted the bad build.prop from the system, and The recovery-from-boot.p file or something similar in name, they're the only 2 files in /system that aren't folders, after I rebooted into AP Fast boot and through cmd.exe on win7 and typed in "fastboot -w"
Then "fastboot reboot"
Back too fastboot mode, start RSDLite 6.1.4 w/admin privileges, extracted firmware manually, edited XML too remove any line wit "var" or "OEM" in them, as well as the line with "gpt-main0.bin" I pointed RSD too the XML and it flashed flawlessly
Now I'm back on JB Leak and rooted

KFHD System.img Recovery Tool

THIS IS NOT A CUSTOM RECOVERY!!!
KINDLE FIRE HD 8.9 ONLY!!! USE AT YOUR OWN RISK!!
This is an update to the KFHD_SRTool, now for use with the Kindle Fire HD 8.9
This is ONLY for use with 8.9" models, not for use with 7" unless you replace system.img with your own backup.
A factory cable is not needed to enable fastboot on this model. Even if the device is in a loop and ADB can not recognize it. I have personally put my device in a loop to confirm it works. To enable fastboot use option 1 from the tool
Instructions:
1. Download and unzip the tool of your choice from the link below (I have confirmed you can downgrade from 8.1.4 to 8.1.3)
2. Run SR Tool
That's it, wait for the tool to finish. Be patient this can take a few minutes. To exit fastboot use option 6 or hold down the power button for 10-20 seconds. When you reboot the first time it may seem to loop once but this is normal and will boot up. Once again be patient, especially if you chose to erase cache and userdata. The system needs to rebuild those partitions. Hope this helps some of you in the community. Again sorry for the size of the download, this is why I made this a separate tool instead of combining it with the HD7 version.
Downloads:
KFHD_SRTv2.1- 8.1.4
KFHD_SRTv2.0- 8.1.3
KFHD_SRTv1.3- 8.1.2
UPDATES:
12-24-12
System v8.1.4
12-12-12:
System backup from v8.1.3 KFHD_SRTool_v2.0
Option menu has changed
New options: Install of GoogleServicesFramework.apk, enable fastboot with device powered on or off.
Option 4 removed due to new option of enable fastboot
DOWNGRADE:
I no longer own this device so I cannot make backups of newer system versions, for the time being here are instructions for downgrading to 8.1.4:
1.) Download boot and recovery imgs(these are backups from 8.1.4) from this LINK and place in the folder where you have access to fastboot or inside the KFHD_SRTool_v2.1 folder
2.) Use KFHD_SRTool_v2.1 to flash system.img.
3.) Erase userdata and cache
4.) Open a cmd prompt from the folder where you placed the previously downloaded .img's.
Use these cmds:
Code:
fastboot -i 0x1949 flash boot boot.img
fastboot -i 0x1949 flash recovery recovery.img
5- Reboot.
Thanks to mdblaze for bringing to my attention that a factory cable is not needed with this device
Again Thanks to kinfauns for the how to on backing up and restoring system software.

Thank you for adding the 8.9 to your tool onemeila. I appreciate the work you've done.
I can confirm this does work to fix an hd stuck on the kindle fire logo. Thanks again.

I can't download it :/
When I click "download anyway" it just refreshes the page.

FroyoShark said:
I can't download it :/
When I click "download anyway" it just refreshes the page.
Click to expand...
Click to collapse
Don't know what is going on there. I just went to the link and had no problem. Try again and let me know. If it doesn't work pm me and I'll send you another link.

onemeila said:
Don't know what is going on there. I just went to the link and had no problem. Try again and let me know. If it doesn't work pm me and I'll send you another link.
Click to expand...
Click to collapse
Hmm, it lets me download it on my desktop, but no matter what browser I try to download it on with my laptop it does the same thing. Weird.
---------- Post added at 05:11 PM ---------- Previous post was at 04:39 PM ----------
I got it working, but how do I get Apex launcher working again after the update?

FroyoShark said:
Hmm, it lets me download it on my desktop, but no matter what browser I try to download it on with my laptop it does the same thing. Weird.
---------- Post added at 05:11 PM ---------- Previous post was at 04:39 PM ----------
I got it working, but how do I get Apex launcher working again after the update?
Click to expand...
Click to collapse
Yeah sorry I made those backups before the update. Download from the play store, go into your file manager and move it from /data/app/ folder to /system/app/ folder then reboot.
Did you have to re-root.

onemeila said:
Yeah sorry I made those backups before the update. Download from the play store, go into your file manager and move it from /data/app/ folder to /system/app/ folder then reboot.
Did you have to re-root.
Click to expand...
Click to collapse
That worked, thanks. I did have to re-root. Maybe make it so it installs the OTA Rootkeeper as well?

FroyoShark said:
That worked, thanks. I did have to re-root. Maybe make it so it installs the OTA Rootkeeper as well?
Click to expand...
Click to collapse
OTA Rootkeeper does not work. There are a couple system apps that can be altered to stop updates, I can't think of them but they are in another thread. Now that you have your device working I would recommend making a backup of your own of all the partitions. If you mess something else up outside the system partition this restore tool won't fix it. Very easy to do check out this thread:
http://forum.xda-developers.com/showthread.php?t=1930656

Firstly, good work. Play store wouldn't open for me, so I ended up needing to manually copy all files from gapps onto the device. It seems that you might be missing the gapps framework permission files. It's painfully slow however, and apps are constantly closing. I full wiped using fastboot.

synergye said:
Firstly, good work. Play store wouldn't open for me, so I ended up needing to manually copy all files from gapps onto the device. It seems that you might be missing the gapps framework permission files. It's painfully slow however, and apps are constantly closing. I full wiped using fastboot.
Click to expand...
Click to collapse
Yeah the google framework was installed as user app on those backups. I don't like installing things as system apks if its not necessary, just more chances of problems. I'm in the process of adding an option to install that separately, via adb. At first I was just trying to keep everything as close to out of the box as possible so people would just have a clean slate, but its nice to have the options of add-ons in one shot if they are wanted.
I was in a hurry when I made the mods to this version for the 8.9 and just haven't had the time to look back over it. So I apologize if something is off. Please let me know if you or anyone catches something. Was it slow after the the restore?

Is this one version 8.1.2 or 8.1.3?
Need a rootable.

timnan said:
Is this one version 8.1.2 or 8.1.3?
Need a rootable.
Click to expand...
Click to collapse
The backup was done right out of the box after root, so it would be as close to factory as possible. It should be 8.1.2, but 8.1.3 is rootable also. I lost root after the update and was still able to root.

Bricked over a dpi change!
onemeila said:
THIS IS NOT A CUSTOM RECOVERY!!!
KINDLE FIRE HD 8.9 ONLY!!! USE AT YOUR OWN RISK!!
About an hour ago I ran a tool to change dpi on my Kindle 8.9 and was greeted with the unpleasant notice that my 8.9 could not boot. System goes to the screen that asks if I want to do a factory restore. That of course fails. Downloading your recovery prog, will try it in the morning, anything need to do other than follow your bouncing ball?
Thanks
[email protected]@dog
---------- Post added at 02:45 AM ---------- Previous post was at 02:36 AM ----------
onemeila said:
THIS IS NOT A CUSTOM RECOVERY!!!
KINDLE FIRE HD 8.9 ONLY!!! USE AT YOUR OWN RISK!!
To come in next version:
Install of GoogleServicesFramework.apk after erase of cache and userdata, thought about adding this after writing this post.
If anyone wants see other options included let me know.
.
Click to expand...
Click to collapse
Have you added Install of GoogleServicesFramework.apk yet?
Click to expand...
Click to collapse

[QUOTE/]
Have you added Install of GoogleServicesFramework.apk yet?[/QUOTE]
Posting link now

Works as Advertised Thank you Onemeila!
onemeila said:
[QUOTE/]
Have you added Install of GoogleServicesFramework.apk yet?
Click to expand...
Click to collapse
Posting link now[/QUOTE]
Started to use KFHD_SRT v 1.3 When I woke up this morning, had to look for GSFa before starting, then spotted your answer to me, still on my laptop! Sooo I went with KFHD_SRT v2.0 instead. Didn't even finish my first cup of coffee and you had me back up. Needless to say, I think I will stay away from the dpi tool that caused this to begin with. One question, (not sure if I ever used option 5). is it included in Option 3??
I think I owe you something, will take care of it before the weekend.

[email protected]@dog said:
Posting link now
Click to expand...
Click to collapse
One question, (not sure if I ever used option 5). is it included in Option 3?? [/QUOTE]
No it is not. I prefer not to install apps as system apps unless it is necessary. There is no sense in potentially causing more problems. Also the more you install as system, the more you will lose and have to redo if you get an update.

I bricked this device playing with permissions to get app store installed. This tool really saved me.
I used option 4 then 3 and all is well.
Installed Google resources manually as the tool lost the device. Every thing except Gmail that I have in the screenshot works.
Thanks a bunch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my KFJWI using Tapatalk 2

Is it work with 8.1.4?
Hi,
I trying root my kindle 8.9, but is not working, my system version is 8.1.4 is this the problem? I follow steps, but SR Tool, is not detecting my kindle it just stay on <waiting for device>. I tried option 1, to start adb and i got message that adb is outdated, after that i tried option 3 and stay on waiting for device.
I now my kindle show up in adb devices list, after install right drivers, but recovery continue waiting for device.
edited 1: any help very appreciated.
edited 2: finaly all works fine.
thanks.

drr00t said:
Hi,
I trying root my kindle 8.9, but is not working, my system version is 8.1.4 is this the problem? I follow steps, but SR Tool, is not detecting my kindle it just stay on <waiting for device>. I tried option 1, to start adb and i got message that adb is outdated, after that i tried option 3 and stay on waiting for device.
I now my kindle show up in adb devices list, after install right drivers, but recovery continue waiting for device.
edited 1: any help very appreciated.
edited 2: finaly all works fine.
thanks.
Click to expand...
Click to collapse
Thats good you got it to work but if you were just trying to root this was not the tool to use. This tool is used to unbrick your device. It will give you root access but at the moment it is for v8.1.3. So as soon as you have wifi connected it is going to upgrade again to 8.1.4 and you will lose root.

Confirmed- downgrading from 8.1.4 to 8.1.3 is possible with this tool without having to flash other partitions.

[Q] Wiped my phone in TWRP, Now ADB does not work, and I'm stuck.

My computer says "error: device not found" when trying to execute any ADB command.
Fastboot Devices = Detection, but I cannot do anything because ADB does not work.
I also cannot flash any recoveries, and doing so results in a boot loop.
I currently have NO rom running. I've been stuck for now, 4-5 hours.
Thanks.
When my recovery DID work, I could not flash through OTG USB because nothing was detected, and TWRP sideload was also broken.
After that, my recovery mysteriously stopped working, and I can't re-flash any recoveries because ADB fails to find any devices. I've repeatedly attempted to uninstall, and install drivers, but nothing seems to work.
RUU's also fail because they are out of date, and an updated one does not exist. (To fix this problem i need S-OFF which i need ADB function to do... #sadlyfe)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^ Ran the RUU again, same error, and it's about the bootloader.

Just RUU and start over. When I installed the newest twrp yesterday I wiped everything including internal storage and I was planning on side loading a rom but I couldn't get adb to recognize the phone so I was stuck also. I just ran the RUU and started over. I think the newest twrp has issues when trying to use adb or something.

Lancerz said:
Just RUU and start over. When I installed the newest twrp yesterday I wiped everything including internal storage and I was planning on side loading a rom but I couldn't get adb to recognize the phone so I was stuck also. I just ran the RUU and started over. I think the newest twrp has issues when trying to use adb or something.
Click to expand...
Click to collapse
When trying to RUU i run into an error, and i'm guessing that's from being on 4.3 firmware or something that i don't know

Oh yeah I'm S-off so I had no problems. So I guess you are S-on then? I was on the 4.3 firmware also.

Lancerz said:
Oh yeah I'm S-off so I had no problems. So I guess you are S-on then? I was on the 4.3 firmware also.
Click to expand...
Click to collapse
Yep, S-ON
Because I am S-ON, I can't change the fact that it says TAMPERED and RELOCKED SECURITY WARNING, which is probably preventing from the RUU from running.

There is a post somewhere that will show you how to get s-off from where you're at. I'll see if I can find it

Google universal naked HTC one drivers,make sure HTC sync is uninstalled and disable any antivirus and firewalls, including Windows firewall.
Sent from my HTCONE using xda app-developers app

Konfuzion said:
Google universal naked HTC one drivers,make sure HTC sync is uninstalled and disable any antivirus and firewalls, including Windows firewall.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'm going to try that right now.
Still nothing
EDIT: Restarted computer, no detection.

Anyone have any clue?

dmarkmd5 said:
Anyone have any clue?
Click to expand...
Click to collapse
Long shot, try a different usb port? And don't plug the phone in until you are booted into fastboot. Also make sure your android sdk is up to date, I have heard it wasn't working for some people with 4.3 until they updated it.
Also maybe try this with phone connected in fastboot
1. Download the Universal Naked Drivers
2. Unzip to any location you want. Just remember where you put them.
3. Plug in your phone to your USB cable.
4. Open your Device Manager (Windows Key + X and select Device manager) and locate HTC under Other Devices and right click on it and select Update Driver Software
5. Select "Browse my computer for driver software"
6. Click Browse and then select the folder you unzipped with the drivers in it then click next.
7. It should now install your drivers and then in your device manager it will now show up "My HTC" under Android USB Devices.
Sent from my HTCONE using xda app-developers app

im in the same boat

Konfuzion said:
Long shot, try a different usb port? And don't plug the phone in until you are booted into fastboot. Also make sure your android sdk is up to date, I have heard it wasn't working for some people with 4.3 until they updated it.
Also maybe try this with phone connected in fastboot
1. Download the Universal Naked Drivers
2. Unzip to any location you want. Just remember where you put them.
3. Plug in your phone to your USB cable.
4. Open your Device Manager (Windows Key + X and select Device manager) and locate HTC under Other Devices and right click on it and select Update Driver Software
5. Select "Browse my computer for driver software"
6. Click Browse and then select the folder you unzipped with the drivers in it then click next.
7. It should now install your drivers and then in your device manager it will now show up "My HTC" under Android USB Devices.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
This is what my Android SDK looks like
and yeah, i uninstalled the drivers, restarted, installed naked htc one drivers, restarted, and still nothing from adb device.

Surprise I GOT SOMETHING!
http://i.imgur.com/U9LfolR.png

Surprise I GOT SOMETHING!
http://i.imgur.com/U9LfolR.png

now you can help me

The solution to this problem was beyond simple, and just plain stupid....
the solution was to flash Installing PhilZ Touch[CWM Advanced Edition]
by sending this command while on fastboot usb fastboot flash recovery philz_touch_5.11.2-m7spr.img
That's all it took, then i go into recovery, activate ADB sideload, it accepts it, goes to 100%, wait for the flash, reboot and bam i'm working again.

..... be iight back
---------- Post added at 04:30 AM ---------- Previous post was at 04:19 AM ----------
flashed phiz touch stl get device not found

lburner said:
..... be iight back
---------- Post added at 04:30 AM ---------- Previous post was at 04:19 AM ----------
flashed phiz touch stl get device not found
Click to expand...
Click to collapse
Did you go into the phillZ adb sideload mode?

dmarkmd5 said:
Did you go into the phillZ adb sideload mode?
Click to expand...
Click to collapse
yup
---------- Post added at 05:09 AM ---------- Previous post was at 05:01 AM ----------
Thankz man i got it, needed the Universal_Naked_Driver_0.73 too ****ing windows 8 will make your kill yoursf

Relocked bootloader isn't the problem. I had an unlocked bootloader and use used the fastboot oem lock command to relock it, then used the RUU to flash back to 1.29
http://forum.xda-developers.com/showthread.php?p=42407269
That is what I use.

[Moto Maxx] Remove unlocked bootloader Warning

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For those who unlocked your bootloaders and now have that annoying "Unlocked bootloader" warning, just download attached file, unzip and flash like this:
fastboot flash logo logo_nounlocked.bin
As always, I'm not responsible for any damage this may cause to your device. Do at your own risk.
Edit: Thanks to @Helvio88 for the help

Very grateful to your collaborations :fingers-crossed:, works perfect !!

Worked like a charm!! Thanks man

Fantastic. Worked great last week. Just now posting, but I hit the thanks button days ago.

Is there any Motorola logo in black background?
It would be great!
Enviado desde mi XT1225 mediante Tapatalk

Excellent!
respider said:
For those who unlocked your bootloaders and now have that annoying "Unlocked bootloader" warning, just download attached file, unzip and flash like this:
fastboot flash logo logo_nounlocked.bin
As always, I'm not responsible for any damage this may cause to your device. Do at your own risk.
Edit: Thanks to @Helvio88 for the help
Click to expand...
Click to collapse
Excellent!, works great! many many thanks!
Wilhelm

Weird startup now
For me, instead of the warning, I get a weird image during boot (looks like just garbage is being shown as the boot image), followed by the "Moto World" animation.
Anyone else getting this?

Excellent work.
Thank you!

tinsukE said:
For me, instead of the warning, I get a weird image during boot (looks like just garbage is being shown as the boot image), followed by the "Moto World" animation.
Anyone else getting this?
Click to expand...
Click to collapse
I'm getting the same thing.

dreyln said:
I'm getting the same thing.
Click to expand...
Click to collapse
You are seeing this "garbage" image instead of the warning, before or after you flash the new file?

ChazzMatt said:
You are seeing this "garbage" image instead of the warning, before or after you flash the new file?
Click to expand...
Click to collapse
Followed the OP's instructions and now, instead of seeing the unlocked bootloader warning when my phone boots up, there is some distorted image that is mostly teal, with some white static and smashed text near the bottom.
I was actually trying to download your PR factory image so I could extract the logo and try flashing it, but there seems to be an issue with One Drive because I can't get the download to start.
---------- Post added at 09:24 AM ---------- Previous post was at 08:38 AM ----------
Doh! I'm an idiot. I flashed the zip instead of unzipping it and flashing the bin file.
Turns out, if you actually follow the instructions, it works
---------- Post added at 09:28 AM ---------- Previous post was at 09:24 AM ----------
tinsukE said:
For me, instead of the warning, I get a weird image during boot (looks like just garbage is being shown as the boot image), followed by the "Moto World" animation.
Anyone else getting this?
Click to expand...
Click to collapse
You may have flashed the file posted by respider without unzipping it first.

dreyln said:
Followed the OP's instructions and now, instead of seeing the unlocked bootloader warning when my phone boots up, there is some distorted image that is mostly teal, with some white static and smashed text near the bottom.
I was actually trying to download your PR factory image so I could extract the logo and try flashing it, but there seems to be an issue with One Drive because I can't get the download to start.
---------- Post added at 09:24 AM ---------- Previous post was at 08:38 AM ----------
Doh! I'm an idiot. I flashed the zip instead of unzipping it and flashing the bin file.
Turns out, if you actually follow the instructions, it works
---------- Post added at 09:28 AM ---------- Previous post was at 09:24 AM ----------
You may have flashed the file posted by respider without unzipping it first.
Click to expand...
Click to collapse
You are right, I had flashed the zip, not the unzipped bin file

Worked great, thank you very much.

Is there a way I can go back to stock?

mathab said:
Is there a way I can go back to stock?
Click to expand...
Click to collapse
You can lock the bootloader back.

mathab said:
Is there a way I can go back to stock?
Click to expand...
Click to collapse
on fastboot write:
Code:
fastboot erase clogo
and you will have the warning back

Will this boot logo work on moto maxx on lollipop?

prking07 said:
Will this boot logo work on moto maxx on lollipop?
Click to expand...
Click to collapse
yes it does.

Jaocagomez said:
on fastboot write:
Code:
fastboot erase clogo
and you will have the warning back
Click to expand...
Click to collapse
But not sure why you want the warning back.

Jaocagomez said:
on fastboot write:
Code:
fastboot erase clogo
and you will have the warning back
Click to expand...
Click to collapse
If i do this command will remove unlocked logo?

[How to backup IMEI] P8 Lite Honor 4X/C

So I was browsing trough the phone and I noticed that we had IMEI stored in a folder called /mnvm2:0/SC/Pers/
NEED ROOT? sadly yes.
Where our IMEI is stored. I'm going to give you a tiny script that backup these files.
Notice that this won't take long and you're not going to mess something up
http://cloud.tapatalk.com/s/57ed06355b267/Imeipull.txt
Download this file and rename it from. Txt to. Sh
Then simply execute the script as root (I prefer root browser.)
But if u wanna backup all the 3 nvm folders feel free to do so.
This is how it'll look like if u remove thus files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ALE-L21 using Tapatalk

Thanks.
Sorry for my bad English.来自华为荣耀畅玩4C-天生急性子 欢迎关注华为Y220T10吧。

zhaozihanzzh said:
Thanks.
Sorry for my bad English.来自华为荣耀畅玩4C-天生急性子 欢迎关注华为Y220T10吧。
Click to expand...
Click to collapse
No problem ill see what partition this is stored in if I can
Sent from my ALE-L21 using Tapatalk

Reload Script
U can reload the script please? The link dont work for me, thanks!

w98787 said:
U can reload the script please? The link dont work for me, thanks!
Click to expand...
Click to collapse
Check in any folder in / with name mnvm2
In sub folder there should be 4 files for imei
Sent from my FRD-L09 using Tapatalk

erase mnvm folder
i erase all mnvm folder , the phone don't start , no force update , i wipe all ( data, dalvik , cache , system) but phone don't start, force update stop on 20% and restart in twrp. Any solution?

Ciava88 said:
i erase all mnvm folder , the phone don't start , no force update , i wipe all ( data, dalvik , cache , system) but don't start, force update stop on 20% and restart in twrp. Any solution?
Click to expand...
Click to collapse
Install latest TWRP , wipe everything and flash emui zip file through TWRP

salembream said:
Install latest TWRP , wipe everything and flash emui zip file through TWRP
Click to expand...
Click to collapse
I resolved ; Wipe all , put dload folder in extsdcard , press vol+ vol- power run force update but at 28% restart in twrp ,
press vol- power to enter in fastbootmode , run pc , flash stock recovery , press vol+ vol- power run force update and another restart but the force update start again and finished. Now don't have a imei and the network lock is on !
If i flash your zip file can i resolve?
Sorry for my bad English

Ciava88 said:
I resolved ; Wipe all , put dload folder in extsdcard , press vol+ vol- power run force update but at 28% restart in twrp ,
press vol- power to enter in fastbootmode , run pc , flash stock recovery , press vol+ vol- power run force update and another restart but the force update start again and finished. Now don't have a imei and the network lock is on !
If i flash your zip file can i resolve?
Sorry for my bad English
Click to expand...
Click to collapse
IDK actually, but when I did it I had no issues,
If u want another way, use unbrick method "you can find it somewhere in this forum"
Then flash latest emui you want

salembream said:
IDK actually, but when I did it I had no issues,
If u want another way, use unbrick method "you can find it somewhere in this forum"
Then flash latest emui you want
Click to expand...
Click to collapse
the phone now run without problem , the signal network is blocked now try the dc-unlocker for 4€ If I fix it well, otherwise I only spent 4 euros, what do you think?

Ciava88 said:
the phone now run without problem , the signal network is blocked now try the dc-unlocker for 4€ If I fix it well, otherwise I only spent 4 euros, what do you think?
Click to expand...
Click to collapse
The problem mostly happened cause of wrong flashing
Using unbrick method is more recommended in my opinion.
---------- Post added at 02:33 PM ---------- Previous post was at 02:30 PM ----------
salembream said:
The problem mostly happened cause of wrong flashing
Using unbrick method is more recommended in my opinion.
Click to expand...
Click to collapse
Aah wait ..
did u try to search for OTA updates??
If the phone can find update it may solve the IMEI issue

salembream said:
The problem mostly happened cause of wrong flashing
Using unbrick method is more recommended in my opinion.
---------- Post added at 02:33 PM ---------- Previous post was at 02:30 PM ----------
Aah wait ..
did u try to search for OTA updates??
If the phone can find update it may solve the IMEI issue
Click to expand...
Click to collapse
my current version is ale-l21c432b565 , try to search ota update, ota serach but nothing " no update".
*#06# no number, info status imei unknown, The phone does not connect to the network since before but IMEI was visible, I unblocked the bootloader with that IMEI

no possible put my number IMEI manualy ? root and find folder IMEI ? my imei is 0000000000

where are folder imei informations in huawei´s ??

My imei huawei mate 9 is 00000000000000
How Fix it please