Database Develop

[Q] Please help savage my Z1

So the other day I confirmed for an OTA update for my Z1. Little did I know, 3 seconds and an auto shut down later, I would end up with my Z1 being stuck in a bootloop with no access to recovery mode.
I really need help on getting my Z1's internal memory (photos, notes, contacts) extracted. I tried a few of the local repair shops and they said that the data inside is corrupted.
I've try ADB but it says "permission denied" whenever I try getting in the storage>sdcard. Probably due to me putting a swipe pattern lock screen on it.
So if there's any hope at all, I'm willing to even disassemble it if that could even help.
I've not rooted it but I do believe the bootloader is unlocked.
- I should also mention I'm a real amateur at this stuff so please be very patient and specific with the instructions. Thanks!

Try using this guide: http://www.ibtimes.co.uk/how-instal...z3-z2-devices-via-xperifirm-flashtool-1492498
it's for updating your os with flash tool just use an ftf file for z1. And in the final stage of the update untick the 3 wipe options and this should save your data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i'm not totally sure this will work, depends on how much your memory is ruined. If it was just an installation of your os error this should reinstall an updated os without erasing data. first try other methods for saving your data and if you won't find any, try this one

btw, in the picture i posted i didnt untick those 3 wipe options, don't forget to untick them else you'll wipe your memory!!!

silentmax24 said:
Try using this guide: http://www.ibtimes.co.uk/how-instal...z3-z2-devices-via-xperifirm-flashtool-1492498
it's for updating your os with flash tool just use an ftf file for z1. And in the final stage of the update untick the 3 wipe options and this should save your data.
i'm not totally sure this will work, depends on how much your memory is ruined. If it was just an installation of your os error this should reinstall an updated os without erasing data. first try other methods for saving your data and if you won't find any, try this one
Click to expand...
Click to collapse
I tried with all 3 available firmware (SG) but still not able to boot up the phone normally, nor was I able to access the memory through adb. Any other thoughts on that?

qazamy said:
I tried with all 3 available firmware (SG) but still not able to boot up the phone normally, nor was I able to access the memory through adb. Any other thoughts on that?
Click to expand...
Click to collapse
give it a try..since ur bootloader was already unlock flash kernel and boot into twrp, then connect ur phone, now in ur computer u can now see the storage of ur mobile, look for the pics u've been talking about, in DCIM folder, for the notes i dont know the path..hehe

mizukage said:
give it a try..since ur bootloader was already unlock flash kernel and boot into twrp, then connect ur phone, now in ur computer u can now see the storage of ur mobile, look for the pics u've been talking about, in DCIM folder, for the notes i dont know the path..hehe
Click to expand...
Click to collapse
Do you have like a more specific step-by-step guide of what you're talking about?

qazamy said:
Do you have like a more specific step-by-step guide of what you're talking about?
Click to expand...
Click to collapse
1. dl kernel for lolli if ur on lolli and vice versa
2. unpack/ectract it and lookg for boot.img
3. run flashtool and select fastboot mode look for the boot.img [dont flash it yet]
4. device is turned off, connect it into fastboot mode and flash.
5. click reboot into system and keep pressing vol down until u go into recovery
connect ur device and u will see ur mobile into ur computer that it was detected, now browse for the pics that u wanted to back up

qazamy said:
So the other day I confirmed for an OTA update for my Z1. Little did I know, 3 seconds and an auto shut down later, I would end up with my Z1 being stuck in a bootloop with no access to recovery mode.
I really need help on getting my Z1's internal memory (photos, notes, contacts) extracted. I tried a few of the local repair shops and they said that the data inside is corrupted.
I've try ADB but it says "permission denied" whenever I try getting in the storage>sdcard. Probably due to me putting a swipe pattern lock screen on it.
So if there's any hope at all, I'm willing to even disassemble it if that could even help.
I've not rooted it but I do believe the bootloader is unlocked.
- I should also mention I'm a real amateur at this stuff so please be very patient and specific with the instructions. Thanks!
Click to expand...
Click to collapse
1. try flash ftf again, unstick applog and data, stick on cache ( wipe cache). try several times maybe it will bootup.
2. you sure your bootloader is unlocked ?
use flashtool to check your bootloader status, if it really unlocked just flash a custom kernel have build in recovery to save your data.
if it is locked bootloader, you can unlock via flashtool, it wont wipe you data like fastboot unlock, and flash kernel but you will lose your sony function forever if you dont have any TA backup before. you should consider to choose your data or sony function.

Are you sure your bootloader is unlocked?
Dude, Are you sure that your bootloader is unlocked?
1st confirm that and accordingly there are ways by which you can recover your data.
Guys here have already recommended methods by which you can get your data back. I suggest read through general an Q&A forums. Read thread for soft bricking. Do not panic and carefully follow the instructions. You should get your data back.
similar case has happened with me few times and I was sucessfully able to get my data back.. so dont worry..

[ROOT][P9 Lite] Root, Recovery & Bootloader Unlock by HassanMirza01

DESCRIPTION:
Today i found the Root & Installing Custom Recovery(TWRP) in P9 Lite surely...
DISCLAIMER:
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISTES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Go to this site Unlocking Code website or use this if above have some problem or not working, then Use this Website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BOX OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "HUAWEI VNS-L21" or "HUAWEI VNS-L31"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
If your product id is incorrect as website says, then Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
After receiving the unlock code, write down the code;
Now go in your P9Lite's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install TWRP recovery in Marshmallow.... Download the Root and TWRP recovery File from here...
This File Also contain Stock Recovery of P9 Lite
P9 Lite Root, TWRP and Stock Recovery by HassanMirza01
After this, unzip it and better come again in Fastboot Mode like above as explained,
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in cmd to install the Custom Recovery(TWRP) in your phone.
fastboot flash recovery twrp.img
Then
fastboot reboot
This will reboot your phone and TWRP installed.
Gonna Done Root now... READ CAREFULLY..
Now there is zip file named Root-SuperSU-v2.65, Open TWRP recovery by long pressing Power up and Home button when switched off, after that, swipe for modifications, change the language to english as recovery is in Chinese, go in 6th menu, one above from last and select english...
install this zip file with TWRP and reboot, if supersu appear on 2nd page of your home screen, it is done, if not, do it again and this time it will surely done....
Then reboot your phone and then supersu will be stable,,,
Now you have Successfully Rooted P9 Lite
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
XDA: DevDB Information:
[ROOT][P9 Lite] Root, Recovery & Bootloader Unlock by HassanMirza01
Contributors:
@HassanMirza01
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-09-08
Last Updated on: 2016-09-08

reserved

That Recovery,do the backup normally? or throw the error 255 when you do it?

@andrexp31 i saw your error somewhere, wait the link is still updating, dont download it now,,,
and i tried backup wid it, and it does like a charm,,, if you got error in data backup, backup it alone, just backup data it will be done widout any error...
hit thanks if it helped!!
@HassanMirza01

but in how many time it will be uploaded bro ?
Need it quickly... and any other way u know to unlock BL ?

@BlackHawk03 6min left for it, i have a bit slow connection. and you can unlock Bootloader in other way too if your phone is already rooted but in our case, it can't and MM cant be rooted directly.
Hope it helped!!
@HassanMirza01

Link Updated!!
@HassanMirza01

thanks bro

BlackHawk03 said:
but in how many time it will be uploaded bro ?
Need it quickly... and any other way u know to unlock BL ?
Click to expand...
Click to collapse
With this...you can unlock the bootloader easily... And root it... and TWRP Recovery...but the recovery doesnt work well. Its tested by me...
http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873

Bro its same recovery nd i tried first then write it.... Its working well... I can send you screenshot of all backup i done with it!!

Thank you bro HassanMirza01
great work
It's succeeded

@ashrafkhalaf no problem man..... This all for you..... :
Hit thanks if it helped

HassanMirza01 said:
Bro its same recovery nd i tried first then write it.... Its working well... I can send you screenshot of all backup i done with it!!
Click to expand...
Click to collapse
I dont know man... i have that,but with me a total backup is imposible... send me a "Tarfork"error on data or something like that.. 255 is his number...
I dont know... Anyway... I REALLY WANT CM13 on my P9 Lite.

Bro dont do full backup... Just tick data nd backup it.... It done backup of just data nicely.... No error i got there.... We also want CM13 on p9 lite but no dev ready to do it

HassanMirza01 said:
Bro dont do full backup... Just tick data nd backup it.... It done backup of just data nicely.... No error i got there.... We also want CM13 on p9 lite but no dev ready to do it
Click to expand...
Click to collapse
Tale a look at this thread about CM 13.
http://forum.xda-developers.com/huawei-p9lite/help/how-device-developer-t3455331

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look man... This time,the only thing that i try to back...was the data folder.
Sent from my HUAWEI VNS-L31 using XDA-Developers mobile app

Bro try to backup it in internal memory.... Coz i have no sd card yet.....
Sent from my HUAWEI VNS-L21 using XDA-Developers mobile app

Latest OTA broke this method
I can't reflash TWRP/Root since my phone got the latest OTA firmware update.
It seems to flash the recovery correctly, but when I want to boot into it, I just get the EMUI recovery.
I tried several times.
My phone is a VNS-31 version VNS-L31C432B150 with EMUI 4.1.1.

Send the screenshot of cmd commands when you flash it.....

And one more thing, you need to check your bootloader again,,, i heard that it got relock again on firmware upgrade... Check that too,,, at last, see in usb debugging options that oem enabled or not!!

[GUIDE] Unbrick your Nokia 5

If your phone got stuck in 900E mode
-Hold Vol Up + Power for a few times to boot the phone to recovery mode
-Flash the ORIGINAL boot, system partitions and detele the data and cache partitions (choose flash image in TWRP for img files) (I used this yadi.sk/d/rcNFNnPp3MhtMe )
-Flash SuperSU in the recovery to patch the boot partition then reboot
If your phone got bootloop-ed
-Hold Vol Up + Power until the screen turns off then release
-Open OnlineUpdateTool (patched) and load your firmware in nb0 format
-Plug in your phone, it'll reboot to download mode
-Proceed to reflash the firmware
If your phone got stuck in 9008 mode
-Use @heineken78 's nb0 tools ( drive.google.com/file/d/0B3Wy4Ok3qGszaXhzM29YOEhrMW8 ) to extract the nb0 firmware
-Take the rawprogram, patch0 and firehose file with images in the rawprogram (search with the keyword filename) and put it inside a folder, rename according to the xml
-Load rawprogram, patch0 and firehose in QFIL, one by one to boot the phone
-You can use the firmware above for QFIL
Credits
@hikari_calyx for the method
@Quixote78 for OST and patch
These methods should also work on Nokia 2, 6, 7 (Although firmware isn't available for Nokia 7) and 8 in theory.
And, you can use EDL cable to force enter Qualcomm 9008, which doesn't work on Nokia 8. (Nokia 7 may not work either)
Click to expand...
Click to collapse

These methods should also work on Nokia 2, 6, 7 (Although firmware isn't available for Nokia 7) and 8 in theory.
And, you can use EDL cable to force enter Qualcomm 9008, which doesn't work on Nokia 8. (Nokia 7 may not work either)
Nokia 3? It has a MT6737M processor.

Hi, I'm now using Mac, where can I find the onlineUpdateTool? I have googled for quite some time.
Thanks
---------- Post added at 07:54 AM ---------- Previous post was at 07:46 AM ----------
Hi, I've found your onlineUpdateTool.zip, however, it requires password, could you please provide me? Tks

Hi, actually, my case is not bootlooped, it stucks on the recovery mode screen when I turn my phone on.
Please assist.

mrsilver256 said:
Hi, actually, my case is not bootlooped, it stucks on the recovery mode screen when I turn my phone on.
Please assist.
Click to expand...
Click to collapse
Password is 123
For stock recovery, power off the phone and plug in with OnlineUpdateTool open (rom loaded) and proceed to reflash
For TWRP, flash boot and system, delete data and cache then SuperSU root it

wolfyapl said:
Password is 123
For stock recovery, power off the phone and plug in with OnlineUpdateTool open (rom loaded) and proceed to reflash
For TWRP, flash boot and system, delete data and cache then SuperSU root it
Click to expand...
Click to collapse
Hi,
Is the stock rom is in here (nokia 5 included in name)
//mega.nz/#F!1ENgnThL!FyL9uYCC3Dq-16elThKAPg,
do I need to extract it to get nbo file?
Thank you

Hi,
I've run onlineUpdateTool.zip on windows 10 and it stops working all the time.

mrsilver256 said:
Hi,
I've run onlineUpdateTool.zip on windows 10 and it stops working all the time.
Click to expand...
Click to collapse
Have you installed it?

I don't really understand the thread
Help me. I don't think mine is bootloop because once it shows the Powered by android logo, after a few seconds it shut itself down. I've tried multiple methods like wipe data factory reset and installing OTA zips in the recovery mode but no luck at all. Is there any way to solve this problem?
I would really appreciate all the help.

mizuke said:
Help me. I don't think mine is bootloop because once it shows the Powered by android logo, after a few seconds it shut itself down. I've tried multiple methods like wipe data factory reset and installing OTA zips in the recovery mode but no luck at all. Is there any way to solve this problem?
I would really appreciate all the help.
Click to expand...
Click to collapse
If you use TWRP, reflash the ORIGINAL system.img and boot.img. Otherwise, reboot to bootloader

mrsilver256 said:
Hi,
I've run onlineUpdateTool.zip on windows 10 and it stops working all the time.
Click to expand...
Click to collapse
I'm running windows 7 and it's doing the same. :crying::crying:

mizuke said:
I'm running windows 7 and it's doing the same. :crying::crying:
Click to expand...
Click to collapse
Guys, install OST, patch it, and run from the installation folder after deleting config file

mrsilver256 said:
Hi,
I've run onlineUpdateTool.zip on windows 10 and it stops working all the time.
Click to expand...
Click to collapse
mizuke said:
I'm running windows 7 and it's doing the same. :crying::crying:
Click to expand...
Click to collapse
Try delete file: OnlineUpdateTool.exe.config in installation folder and start program again buddy.

thank you for this great post, i have nokia 5 ta-1024 and its dead, please provide me link of nokia ta-1024 firmware.

My nokia got bootlooped?Help please!!
I have powered android logo,(i was at twrp screen and i tried to set english theme i put file ui.zip to the sd card twrp/theme/ ticked first ZIP box at the first section and slided and then my phone nokia 5(TA-1053 ) rebooted and then i cant get to twrp again :\

Hi all, I have try to install this firmware ND1-3700-0-00WW-B03.nb0 on my Nokia 5 but when this phone restarts, I receive this message on Online Update Tool..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

roxy94 said:
Hi all, I have try to install this firmware ND1-3700-0-00WW-B03.nb0 on my Nokia 5 but when this phone restarts, I receive this message on Online Update Tool..
Click to expand...
Click to collapse
Same problem here...

SimGa said:
Same problem here...
Click to expand...
Click to collapse
Same on my ta1024 ...omg dead phone without system... what to do?
Is this tool error or wrong firmware / nbo file maybe? its like a adb error ...
Now im using my lumia 950 ...

dex87xda said:
Same on my ta1024 ...omg dead phone without system... what to do?
Is this tool error or wrong firmware / nbo file maybe? its like a adb error ...
Now im using my lumia 950 ...
Click to expand...
Click to collapse
You need to flash any security OTA for 7.1 and then you can flash any firmware with OST

Hi,
I need help. I tried to flash Android 8 and it only says No command and I can't enter into the OS
Any help?
Thanks

Unbrick P9 Eva-L19 or where to get logic board

Hi guys
I've mistakenly (I guess) placed an update.zip in dload folder from the internal memory.
When I booted it with key combo to force update from there, it reaches 5% and then I get an error regarding it does not correspond with original version
When I boot it I have 2 options
- Huawei erecovery, where I get it failed through WiFi
- Wipe data or factory reset, which cannot be done
After this I tried getting original ROMs, placed them in dload folder from sdcard, and I get same error as before. So I think it is not taking into consideration the files from there and I think it is still trying to update from internal memory
It had version B605C135
Then it went to b605c135custD003 or 007 and the problems started from there
My questions would be
Is there any procedure to unbrick and make it work again? ... or...
I was told in repair stores to replace the logic main board, but I cannot find a place to buy it. Does anyone know where I could find this spare part?
Thanks a lot in advance [emoji847]
Enviado desde mi ONE A2005 mediante Tapatalk

kabeza said:
Hi guys
I've mistakenly (I guess) placed an update.zip in dload folder from the internal memory.
When I booted it with key combo to force update from there, it reaches 5% and then I get an error regarding it does not correspond with original version
When I boot it I have 2 options
- Huawei erecovery, where I get it failed through WiFi
- Wipe data or factory reset, which cannot be done
After this I tried getting original ROMs, placed them in dload folder from sdcard, and I get same error as before. So I think it is not taking into consideration the files from there and I think it is still trying to update from internal memory
It had version B605C135
Then it went to b605c135custD003 or 007 and the problems started from there
My questions would be
Is there any procedure to unbrick and make it work again? ... or...
I was told in repair stores to replace the logic main board, but I cannot find a place to buy it. Does anyone know where I could find this spare part?
Thanks a lot in advance [emoji847]
Enviado desde mi ONE A2005 mediante Tapatalk
Click to expand...
Click to collapse
Try doing what I did when I was having issues installing the stock rom. https://forum.xda-developers.com/showpost.php?p=75788148&postcount=13

thedarkinvader said:
Try doing what I did when I was having issues installing the stock rom. https://forum.xda-developers.com/showpost.php?p=75788148&postcount=13
Click to expand...
Click to collapse
How could I Flash (as you quote)
I flashed BOOT.img, SYSTEM.img, RECOVERY.img, and RECOVERY2.img from the stock B381
Click to expand...
Click to collapse
..Without having usb debugging on?
I mean, phone does not have USB debugging on and I guess I won't be able to do anything without it, right?
Any clues about how to enable it from recovery or anywhere? Thanks again
Some images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Try to recover with dload folder with UPDATE.APP (in update.zip from differrent FULLOTA versions) insided, by press and hold: Vol Up + Vol Down + Power buttons.
I have an EVA-L19C636 and it's worked and recovered with B320 version only.

Oh I see. The bootloader's locked. Just curious though, why is wiping and restoring to factory data not working?

thedarkinvader said:
Oh I see. The bootloader's locked. Just curious though, why is wiping and restoring to factory data not working?
Click to expand...
Click to collapse
I guess because I didn't put the right version in the dload folder :crying:

kabeza said:
I guess because I didn't put the right version in the dload folder :crying:
Click to expand...
Click to collapse
I'm not sure what that means, but can you post screenshots of your recovery? You should be able to access that by pressing Vol+ and Power at the same time.
At this point, I think what you should see are options to wipe and all. Can you also post pictures on what happens when you select either? And have you tried unlocking the bootloader through ADB?
The goal I have in mind at this point is for the device to be able to boot so that you can access the Settings app

I've finally paid DC Phoenix flash software license
Tried EVA-L19_C432B360_Firmware_Austria_Poland_Hungary_Bulgaria_Czech_Republic_Nonspecific.APP
And voila, it unlocked bootloader, unlocked frp, did everything and unbricked the phone
Now have to test network bands, etc.
But this is an advance

[GUIDE] Unbrick your device or recover from bootloop

Assalamu alaikum people,
Those on the telegram group know that I bugged you a lot about needing data partition. Because of my experience with unbricking and recovering the device, I can tell you a sureshot method that works to restore the device. Do not use this method if your device already works. There seems to be a lot of files inside the data partition which are necessary for the stock ROM to work. This method asks you to wipe data partition and so system update will not work. This should be a last resort. .
Many people seem to have come to the situation where they are in fastboot, and it says frp locked, so they cannot flash new twrp. And the system seems to be in bootloop and it does not work. What to do from there?
1. Download this file ->https://www.androidfilehost.com/?fid=673956719939832337.
2. In your SDCard, create a folder called TWRP and inside it, create a folder called BACKUPS (all in capitals). Inside this, create a folder called 7xtwrpbackup (small letters) and paste the contents of the zip that you have downloaded into this.
3. Boot to twrp in your device and go to restore. There you should see a folder 7xtwrpbackup. If you select it, you will get a checkbox below with recovery_ramdisk like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Select Yes and after restore complete, go back and select reboot and reboot to recovery.
5. Now, the new twrp will boot. In the new twrp, I want you to first go to wipe -> advanced wipe -> select dalvik/art cache, cache, data, internal storage and system.
6. Come back once again and select wipe, and this time, select format data. It will ask you to type yes. After that is done, come back once again.
7. Now select install and in that, install the openkirin RR image from telegram group or here -> https://forum.xda-developers.com/honor-view-10/development/rom-t3753555 (This step is optional because openkirin RR has a greater chance of booting than stock ROM. You can skip this step and directly boot stock)
8. Your system must boot now. If it boots, then all partitions are good. You can boot stock.
9. You can now can download stock from my post here and repeat from step 5-> https://forum.xda-developers.com/9-lite/development/stock-img-unlock-indian-version-t3767569
If this does not work, then look at the second method in the next post

Second method
If your first method does not work, then you can try this second method. Make sure you have enough data left in your internet connection (1.8 GB ish) before starting the process. Please note that this method will lock your bootloader, install stock recovery, flash the stock system and boot your phone. Of course, even if it relocks the bootloader, you can still unlock it using your code.
1. Download the zip
https://www.androidfilehost.com/?fid=746010030569970895
2. Extract it into sdcard directly (i.e. extract it to the root folder of your sdcard)
3. Make sure you have enough battery left (atleast 15%). Power off your phone. Now, press and hold vol up + Vol down + power buttons until the honor logo comes. Then, you can release all the keys. The system will go into emui recovery and restore your phone.
You will have stock phone at the end of the process.
Note:-If you still have bootloop at Honor logo, then power off the phone. Hold vol up + power button until the honor logo comes. It will boot into stock recovery. From there, you can do a factory reset and erase cache partition. Then the phone will definitely boot up.

Bricked my device Twrp doesn't work
Hello, I have bricked my honor 9 lite AL10(Indian Version). I have formatted my vender directory through Twrp by mistake now my device shows erecovery and reboots. Fastboot is working fine and FRP and Devices both shows unlocked means I can flash through fastboot. I don't want to lose my internal memory data.
Help me to unbrick my device !! :crying:

Oushal kDee said:
Hello, I have bricked my honor 9 lite AL10(Indian Version). I have formatted my vender directory through Twrp by mistake now my device shows erecovery and reboots. Fastboot is working fine and FRP and Devices both shows unlocked means I can flash through fastboot. I don't want to lose my internal memory data.
Help me to unbrick my device !! :crying:
Click to expand...
Click to collapse
Download vendor partition from here https://forum.xda-developers.com/9-lite/development/stock-img-unlock-indian-version-t3767569

Hello i am siddharth, i have relocked my oem by fastboot oem relock -------- after that yes/no option came i click on yes. It starts factory formatting after completion of formatting when the phone starts its showing your device has failed verification and got stuck in it. When i press reboot option it will directly comes to erecovery mode wher the option came to download new recovery when i connect my phone with wifi it starts searching for some time after that system update failed.
When i starts mobile directly to fastboot mode by pressing volume down button and power button the white screen with android comes appear i.e fastboot mode screen. In that screen in green colour i found that
Phone Relock
FRP lock
When ever i m trying to find the device in fastboot mode by typing fastboot devices my device showing there but no other command is working such as fastboot oem unlock -------, fastboot flash system system.img, all the time it comes Failed.
I have downloaded many UPDATE.APP and tried to load that by dload method but every time after 5% it come Failed to install.
I have downloaded UPDATE.APP form ur given link also. This is only the image in which my phone comes upto 23% install after dat failed.
Nothing working for me. Kindly help me.
Mail me if there is any solution @
[email protected]

i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help

None of the method worked for me my device still bootloops no matter what system.img or rom zip file i flash. The emui recovery method didn't work for me as it loaded up to 5% and then failed instantly. Please help me unbrick my 9 lite bro. Could you provide me the boot.img? i think my phone got bricked because i tried to i install magisk on treble rom (i guess?). But anyway PLEASE HELP ME (

Try extracting kernel.img from an update and flash that. It fixed it for me.

hi twrp is bootlooping as well
cant access
---------- Post added at 07:15 PM ---------- Previous post was at 06:52 PM ----------
hey i used the twrp from the link made a backup restored it now a get bootloop cant get into twrp it goes in ti it then it fcs then am back to bootloader unlocked warning

hi anyone got custom.img and userdata.img from this LLDL31C432B130 800130 a need to restore my device

Same Problem
[email protected] said:
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
Click to expand...
Click to collapse
Even I'm facing the same problem, if anyone has solution plz help.
---------- Post added at 10:15 AM ---------- Previous post was at 10:10 AM ----------
[email protected] said:
i have tried first method it failed and says 'no partition selected for restore'
and their is no option to select partition what should i do plz help
Click to expand...
Click to collapse
Even I'm facing the same problem.

mine goes to 5% doesnt do anything and then it fails

aveemashfaq said:
If your first method does not work, then you can try this second method. Make sure you have enough data left in your internet connection (1.8 GB ish) before starting the process. Please note that this method will lock your bootloader, install stock recovery, flash the stock system and boot your phone. Of course, even if it relocks the bootloader, you can still unlock it using your code.
1. Download the zip
https://www.androidfilehost.com/?fid=746010030569970895
2. Extract it into sdcard directly (i.e. extract it to the root folder of your sdcard)
3. Make sure you have enough battery left (atleast 15%). Power off your phone. Now, press and hold vol up + Vol down + power buttons until the honor logo comes. Then, you can release all the keys. The system will go into emui recovery and restore your phone.
You will have stock phone at the end of the process.
Note:-If you still have bootloop at Honor logo, then power off the phone. Hold vol up + power button until the honor logo comes. It will boot into stock recovery. From there, you can do a factory reset and erase cache partition. Then the phone will definitely boot up.
Click to expand...
Click to collapse
But this is for L31
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
My phone's frp and bootloader locked,and phone is booting to erecovery,what to do

need help with LLD-AL10C675 indian version
I have flashed a cutom treble rom phh-treble to be specific,used it for couple of days and then tried instaling the magisk from magiskmanager and after its done when i reboot it shows error mode with message Func no:10(boot img ) and func no:2 , i can boot into fastboot mode both frp and phone unlocked ,can some please help me to get back my phone into a usable condition thank you

sunny_deed said:
I have flashed a cutom treble rom phh-treble to be specific,used it for couple of days and then tried instaling the magisk from magiskmanager and after its done when i reboot it shows error mode with message Func no:10(boot img ) and func no:2 , i can boot into fastboot mode both frp and phone unlocked ,can some please help me to get back my phone into a usable condition thank you
Click to expand...
Click to collapse
To help you a full firmware is required and that's not available for (India c675) yet!
Before any modification to system you should have a full firmware in hand.

BS4388 said:
To help you a full firmware is required and that's not available for (India c675) yet!
Before any modification to system you should have a full firmware in hand.
Click to expand...
Click to collapse
yea that was a pretty big mistake i made without looking for it, i have been told by someone that we can pull out all the require d imgs from a phone in good working condition, i asked in the hopes that someone would be generous enough to do that for me , thank you ,and also does anyone have any idea about when the full firmware will be released

sunny_deed said:
yea that was a pretty big mistake i made without looking for it, i have been told by someone that we can pull out all the require d imgs from a phone in good working condition, i asked in the hopes that someone would be generous enough to do that for me , thank you ,and also does anyone have any idea about when the full firmware will be released
Click to expand...
Click to collapse
What's wrong with the version (675) from here :-
https://www.mobileheadlines.net/download-huawei-honor-9-lite-firmware-files/

Sparkrite said:
What's wrong with the version (675) from here :-
https://www.mobileheadlines.net/download-huawei-honor-9-lite-firmware-files/
Click to expand...
Click to collapse
there is no Fullota version in there

sunny_deed said:
there is no Fullota version in there
Click to expand...
Click to collapse
Go:
https://forum.xda-developers.com/9-lite/development/stock-rom-indian-firmware-c675-t3813875

sunny_deed said:
there is no Fullota version in there
Click to expand...
Click to collapse
My bad, I was only trying to help.............
Anyway you have it now (post above) thanks to @BS4388 and @VigneshS007 .