I have the GT-i9000M
I did not put Cyanogen 9 on myself, the phone was given to me with it on it. I wanted to upgrade to cyanogen 10 so I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=1778526 .
"- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon"
Did my nandroid backup obviously, wiped everything, then I went to "install zip from sdcard" picked "cm-10-20120726-UNOFFICIAL-galaxysmtd.zip" then my phone went into a reboot loop of just failing. So I went back into recover with 3 button combo and wiped everything again and restored from my nandroid backup, then when I booted back up I had no lockscreen and my phone and camera apps were gone.
What did I do wrong and how do I get those back and/or upgrade to cyanogen 10 properly?
Keep in mind this is my first time doing anything like this to my android, I was given it with cyanogen 9 on it.
Edit: Now when I try restoring from my nandroid backup and reboot all I see the is the cyanogen (mod) 9 animation boot screen forever, it never boots.
fastfreddy101 said:
Edit: Now when I try restoring from my nandroid backup and reboot all I see the is the cyanogen (mod) 9 animation boot screen forever, it never boots.
Click to expand...
Click to collapse
First i9000M is not same as I9000 http://forum.xda-developers.com/showthread.php?t=886158
so you need to check for compatibility problems
This procedure is for i9000
1. Using CWM, make sure to wipe data/factory reset, then wipe cache, and then go into advanced, and wipe the Dalvik cache too.
2. From there, flash the ROM
3. Afterwards, repeat the wipe step (step #1).
4. Continuing on, go into advanced and fix permissions.
5. Finally, reboot the device.
Thanks for the reply!
I finally got it by wiping everything and the dalvik cache, and reinstalling the zip from the SD card, got everything working now.
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (success install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
EDIT1: Ok, i just flashed a stock rom and it worked... now i'm on stock gingerbread 2.3.4, any tutorial to install cm10?
Thanks a lot... i just tought i bricked my phone
Javiern said:
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (sucess install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
Thanks
Click to expand...
Click to collapse
Wipe system also then try.
Sent from my LG-P999
how?
cricketAC said:
Wipe system also then try.
Sent from my LG-P999
Click to expand...
Click to collapse
How i do that? i don't see that option on cwm recovery
"
-reboot system now
-apply update from sdcard
-wipe data/factory reset (that's the one i used)
-wipe cache partition
-install zip from sdcard
-backup and restore
-mounts and storage
-advanced
-power off
-go back
"
EDIT1: I tried to format /system but it says "unable to mount"... mount doesn't work either
EDIT2: Backup file it isn't working... totally f***** up
1: wipe data/factory reset
2: wipe cache
3: advanced>wipe dalvik cache
4: mounts n storage>format data, format cache n format system
this is what is meant by full wipe
5: install CM10
6: install latest gapps package for jb
7: reboot system
this should work
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
zxr72 said:
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I just did almost the same thing, just didn't flash cm7
working now... CM10 is soooo smooth
any bug? i don't get the vibration bug, clock FC or the non see External SD
all is working great... wow
Thanks for the help
What am I doing wrong?
Hi!
I never used CM7 or any custom rom.
I had 20s flashed via kdz.
I'm root. I installed ClockWorkMod recovery 4.0.0.5 and made clean cache, wipe dalvik etc.
I installed CM10 from zip (it only took a few seconds!) and rebooted. It showed two LG logos and never passed that.
I kept reading and saw this thread so I used smartflash to go back to FROYO, rooted, installed CWM and installed the last CM7 nightly (only a few seconds!) and rebooted.
All I get is a static LG logo and nothing else. I don't know what to do!
Thanks and sorry about my english!
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
ardiade said:
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
How do I install Nvflash? I have found tutorials for it but they are for the g2x. Will it still work?
I bought an o2x to replace my sgs1 which is great with cm10.
My story:
Phone was used and bone stock with froyo and 725bb
Rooted
Installed rom manager then flashed cwm 6.0.1.5 from rom manager
wiped everything
installed latest CM7
usb mass storage stopped working (was working with stock froyo)
copied latest cm10 nightly and gapps to an sdcard
wiped again
flashed cm10 and gapps
now I'M stuck on cyanogenmod logo and the lower buttons are lightning
repeated the process few times and still stucked at cm logo
Any ideas? Thanks!
*Update* Removed the battery and restarted the phone and now it seems to be working!
Hi Gurus,
I am getting crazy and desperate after this problem: Samsung Ace GT-S5830, rooted, installed recovery clockwork 5.0.2.6, installed CM10.1 Cooper (tried various RC2, RC6, Nightly..) . The result I always get: as soon as I reboot, after the samsung logo it apperas a white screen for two seconds and then turns all black. I waited some time, 15-20 min, but the phone does not boot!!! This happens with several custom ROM.
When I use ODIN to get to stock firmware is OK, but I am not able to boot with CM10.1.. Please any help!!!
Thanks!
How did you flash it? What options did you pick in recovery? Can you name every option you picked as well?
Sent from my GT-S5830 using xda app-developers app
jumper62 said:
How did you flash it? What options did you pick in recovery? Can you name every option you picked as well?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
These were my actions:
-rooted
-installed recovery clockwork 5.0.2.6
-downloaded and copied on the SD card the file "cm-10.1.0-RC6-GT-S5830-cooper"
-boot to get CWM recovery clockwork
- wipe data/factory reset
- wipe cache
- wipe Dalvik cache
- format system
- installed .zip file from SD card "cm-10.1.0-RC6-GT-S5830-cooper"
-reboot
-whote screen (2 seconds) than stucks with black screen
- tried to reboot many times again wiping data, and cache
Note: the same happens with other CM ROMs, cooper or nightly
Note: using ODIN I am able to restore a stock firmware, but I would like to use CM10.1
It is one week behind this and I am getting crazy here! ;-(
Thanks!!
@lz0 said:
Thanks for your reply.
These were my actions:
-rooted
-installed recovery clockwork 5.0.2.6
-downloaded and copied on the SD card the file "cm-10.1.0-RC6-GT-S5830-cooper"
-boot to get CWM recovery clockwork
- wipe data/factory reset
- wipe cache
- wipe Dalvik cache
- format system
- installed .zip file from SD card "cm-10.1.0-RC6-GT-S5830-cooper"
-reboot
-whote screen (2 seconds) than stucks with black screen
- tried to reboot many times again wiping data, and cache
Note: the same happens with other CM ROMs, cooper or nightly
Note: using ODIN I am able to restore a stock firmware, but I would like to use CM10.1
It is one week behind this and I am getting crazy here! ;-(
Thanks!!
Click to expand...
Click to collapse
After installing the zip file, try doing the below steps
- wipe data/factory reset
- wipe cache
- wipe Dalvik cache
and then reboot to see if the problem has vanished.
macumbe intersects
keylocker said:
After installing the zip file, try doing the below steps
- wipe data/factory reset
- wipe cache
- wipe Dalvik cache
and then reboot to see if the problem has vanished.
Click to expand...
Click to collapse
thanks for suggestions but still the same. It does not boot. It stucks on a black screen.
Any other suggestion?
@lz0 said:
thanks for suggestions but still the same. It does not boot. It stucks on a black screen.
Any other suggestion?
Click to expand...
Click to collapse
Check if you're using compatible root. Try using another zip file to root your phone. That could also be the problem.
I will send you the file which worked for me if you want
any ryingeg
keylocker said:
Check if you're using compatible root. Try using another zip file to root your phone. That could also be the problem.
I will send you the file which worked for me if you want
Click to expand...
Click to collapse
Yes, please, if you can send me your files because I have tried many different zip files and it fails with all of them.
Do I need to root it again after I reinstalled the stock firmware (e.g. Android 2.3.6)?
@lz0 said:
Yes, please, if you can send me your files because I have tried many different zip files and it fails with all of them.
Do I need to root it again after I reinstalled the stock firmware (e.g. Android 2.3.6)?
Click to expand...
Click to collapse
Have attached the file. Check it out, though its the same file you used earlier. Use Odin to install Stock Firmware. I was on Gingerbread v2.3.6 when rooted using the attached file. Though you know the steps, let me put it on here.
-Use Odin to install Stock Firmware(You know how to connect the device & work on)
-Once the Stock Firmware is flashed successfully, check if your phone is good to go. Check if everything is working
-Now root your phone using the attached file.
for takelby
keylocker said:
Have attached the file. Check it out, though its the same file you used earlier. Use Odin to install Stock Firmware. I was on Gingerbread v2.3.6 when rooted using the attached file. Though you know the steps, let me put it on here.
-Use Odin to install Stock Firmware(You know how to connect the device & work on)
-Once the Stock Firmware is flashed successfully, check if your phone is good to go. Check if everything is working
-Now root your phone using the attached file.
Click to expand...
Click to collapse
Hi,
thanks for the file.
However It fails on installing update.zip with error code 7, do you know the reason??
thanks!
@lz0 said:
Hi,
thanks for the file.
However It fails on installing update.zip with error code 7, do you know the reason??
thanks!
Click to expand...
Click to collapse
Check this file & let me know. Maybe, the file should be renamed as in the attachment.
Post flashing, if you again face problems then try the below links for a solution
http://forum.xda-developers.com/showthread.php?t=1034145
http://forum.xda-developers.com/showthread.php?t=1282011
http://forum.xda-developers.com/showthread.php?t=1832415
keylocker said:
Check this file & let me know. Maybe, the file should be renamed as in the attachment.
Post flashing, if you again face problems then try the below links for a solution
http://forum.xda-developers.com/showthread.php?t=1034145
http://forum.xda-developers.com/showthread.php?t=1282011
http://forum.xda-developers.com/showthread.php?t=1832415
Click to expand...
Click to collapse
Thanks, after at least 10 attepmts of rooting and reflashing with ODIN I managed to root the phone (confirmed by Root Checker).
(Each root file update.zip, upd_1.zip, root.zip only works with some specific stock firmware, so I managed to finally find the right one for root file update.zip).
NOW: I am trying to install CM10.1 with the following steps:
- Boot into CWM Recovery
- Wipe data/factory reset
- Format /System
- Install zip from SD card / choose ROM zip from SD card
but the boot fails (white screen for 2 seconds than black screen!!!)
I have already tried the following ROMs without success:
cm-10.1-20130503-NIGHTLY-cooper
cm-10.1.0-RC6-GT-S5830-cooper
cm-10.1.0-GT-S5830-cooper++
cooper_PAC_jb-13Dec
My baseband version is Android 2.3.6 with baseband: S5830XWKT7
Do you know which CM10.1 ROMs works well with this baseband???
THANKS!!!!
-
@lz0 said:
Thanks, after at least 10 attepmts of rooting and reflashing with ODIN I managed to root the phone (confirmed by Root Checker).
(Each root file update.zip, upd_1.zip, root.zip only works with some specific stock firmware, so I managed to finally find the right one for root file update.zip).
NOW: I am trying to install CM10.1 with the following steps:
- Boot into CWM Recovery
- Wipe data/factory reset
- Format /System
- Install zip from SD card / choose ROM zip from SD card
but the boot fails (white screen for 2 seconds than black screen!!!)
I have already tried the following ROMs without success:
cm-10.1-20130503-NIGHTLY-cooper
cm-10.1.0-RC6-GT-S5830-cooper
cm-10.1.0-GT-S5830-cooper++
cooper_PAC_jb-13Dec
My baseband version is Android 2.3.6 with baseband: S5830XWKT7
Do you know which CM10.1 ROMs works well with this baseband???
THANKS!!!!
-
Click to expand...
Click to collapse
When you try to flash a new ROM, always perform these steps
-Wipe data/factory reset
-Wipe cache partition
-Go to Advanced & Wipe Dalvik Cache
-Go to Mounts & Storage, format Data, format System
-Install ROM
-Wipe data/factory reset
-Wipe cache partition
-Go to Advanced & Wipe Dalvik Cache
-Reboot the Phone and wait for 15 Mins Max to see if your Phone succeeded in flashing a new ROM
For CM10.1, you can try Mardon's, Maclaw's & many more.
Below is the link to Mardon's Work & Maclaw's.
http://forum.xda-developers.com/showthread.php?t=2212438
http://maclaw.pl/
keylocker said:
When you try to flash a new ROM, always perform these steps
-Wipe data/factory reset
-Wipe cache partition
-Go to Advanced & Wipe Dalvik Cache
-Go to Mounts & Storage, format Data, format System
-Install ROM
-Wipe data/factory reset
-Wipe cache partition
-Go to Advanced & Wipe Dalvik Cache
-Reboot the Phone and wait for 15 Mins Max to see if your Phone succeeded in flashing a new ROM
For CM10.1, you can try Mardon's, Maclaw's & many more.
Below is the link to Mardon's Work & Maclaw's.
http://forum.xda-developers.com/showthread.php?t=2212438
http://maclaw.pl/
Click to expand...
Click to collapse
no way..for every ROM I try I get the same behaviour: during reboot white screen 2 secs then black screen..
I have tried flashing at least 10 ROMs.. is there any chance to take some logs and see the reason.. ??? Any help???
@lz0 said:
no way..for every ROM I try I get the same behaviour: during reboot white screen 2 secs then black screen..
I have tried flashing at least 10 ROMs.. is there any chance to take some logs and see the reason.. ??? Any help???
Click to expand...
Click to collapse
Try the below link on How To Logcat? Sure, this will help you.
http://forum.xda-developers.com/showthread.php?t=1761295
keylocker said:
Try the below link on How To Logcat? Sure, this will help you.
http://forum.xda-developers.com/showthread.php?t=1761295
Click to expand...
Click to collapse
I have the same problem with cm 10.1.what can I do?
mikeydima said:
I have the same problem with cm 10.1.what can I do?
Click to expand...
Click to collapse
what's wrong¿?
Did you download the rom file correctly¿? Is the download file corrupted¿?
Is your sdcard corrupted¿? Did you try to format it in fat32 format?¿
Check it and then flash the rom again, CM roms work with whatever baseband you have, only with (2.3.x as base) and you need CWM5.x to flash this roms
IMPORTANT!! 5830I , 5830C and 5830M models aren't suppot!!!
help..
keylocker said:
After installing the zip file, try doing the below steps
- wipe data/factory reset
- wipe cache
- wipe Dalvik cache
and then reboot to see if the problem has vanished.
Click to expand...
Click to collapse
while in that black screen,how can i get into the recovery mode.......... help
wrabeeng said:
while in that black screen,how can i get into the recovery mode.......... help
Click to expand...
Click to collapse
Press and hold HOME + POWER BUTTON at the same time to start the recovery mode
Change your recovery and switch to CF-Root Kernel
I have a rooted samsung galaxy ace.I trasfered gaps and cm 10.1 on my sd card.I hit home and power button and i got into a recovery mode with only some basic options. Reboot now-Install update from sd card-Wipe data factory reset-wipe cache and something i dont really remember but i dont think its really important. I selected install update from sd card clicked on my zip file and reboot now and now my phone wont open. Its stuck on a screen saying samsung galaxy ace and some other info. Can u explain how can i fix that. I am a complete newbie so be gentle :silly:
Problem with flashing a rom
Kmatzaris said:
I have a rooted samsung galaxy ace.I trasfered gaps and cm 10.1 on my sd card.I hit home and power button and i got into a recovery mode with only some basic options. Reboot now-Install update from sd card-Wipe data factory reset-wipe cache and something i dont really remember but i dont think its really important. I selected install update from sd card clicked on my zip file and reboot now and now my phone wont open. Its stuck on a screen saying samsung galaxy ace and some other info. Can u explain how can i fix that. I am a complete newbie so be gentle :silly:
Click to expand...
Click to collapse
Hi,
1) to fix the problem, get the recovery mode and wipe the cache partition and maybe you need to do a factory reset (it will erase your configuration);
2) to installa a custom rom you need first to root the smartphone and second install CWM recoverty 5.x that override stock recovery;
3) boot in cwm recovery and install CM 10.1 (install zip from sd-card).
daniga74
daniga74 said:
Hi,
1) to fix the problem, get the recovery mode and wipe the cache partition and maybe you need to do a factory reset (it will erase your configuration);
2) to installa a custom rom you need first to root the smartphone and second install CWM recoverty 5.x that override stock recovery;
3) boot in cwm recovery and install CM 10.1 (install zip from sd-card).
daniga74
Click to expand...
Click to collapse
As i said my phone is rooted.I cant acces my phone so how will i install cwm recovery?
Problem with flashing a rom
Kmatzaris said:
As i said my phone is rooted.I cant acces my phone so how will i install cwm recovery?
Click to expand...
Click to collapse
yes but to install CWM you need to access in recovery mode;
if it's not possible, you need to use ODIN and flash first stock rom.
daniga74