Database Develop

[information] GB is released for p920

Link to thread http://forum.xda-developers.com/showthread.php?goto=newpost&t=1355879

Already installed and its working for the thrill

josuelopezv said:
Already installed and its working for the thrill
Click to expand...
Click to collapse
A bit more specific...
Sent from my LG-P925 using XDA App

I downloaded the file from Lg Server
Followed the guide on how to install a KDZ files (link posted above) thanks to adixtra
When the phone rebooted it when into a bootloop so i removed the battery put it back on and went into recovery (volume down + 3D button + power button) wipe data and factory restore
reboot the phone and now I have gingerbread
did a superoneclick root access to gain root
installed CWM again
added the APN's and did a titaniumBackup batch restore and now everything its working and with the nice features
working on a rom for the thrill to add windows FX and other things

Are you able to go back to stock froyo afterwards? All features work? 4G, gps, mms, etc. Also, will there be a need to go to stock and grab the OTA gingerbread update for the thrill when it is released? Thanks in advance.
Sent from my LG-P925 using xda premium

Mart1an said:
Are you able to go back to stock froyo afterwards? All features work? 4G, gps, mms, etc. Also, will there be a need to go to stock and grab the OTA gingerbread update for the thrill when it is released? Thanks in advance.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Yes you can go back to froyo just by doing the exact method but selecting the KDZ file for froyo.
ALL the features works (this is the live official update LG is pushing to european handsets) i have tried everything on my thrill and its working. (As I said before I can't test 4g so you can go ahead and try) obviosly have to set the APN lists manually because you are flashing a debranded (optimus 3d) firmware instead of the AT&T
I suppose that AT&T will release the Official Thrill firmware in the first week of december but unitl then you can install this update risk free and have the advantage of running the new gingerbread roms without going into the hassle of flashing the baseband alone with an XP machine and all that hard work.
Anyone else has installed this on there Thrill besides me? someone in the US so can test the 4G?

I am thinking about doing it. But don't wanna get stuck because I am new to android and I am going to be getting a new phone thru warranty. I figured its perfect to try since i will be replacing this phone anyway, just wanted to make sure I could go back to stock first. Maybe I will try it tonight. I am currently running "Thrill Seeker" custom rom. Do I need to go to stock before doing this?
Edit: also, sorry if this is a stupid question, but does this come with 3D converter?
Sent from my LG-P925 using xda premium

Still can't connect at even 3g at home with the new 920 update. So I doubt 4g will even work

Mart1an said:
Do I need to go to stock before doing this?
Edit: also, sorry if this is a stupid question, but does this come with 3D converter?
Click to expand...
Click to collapse
Yes it comes with 3D converter, flash in the 3D camara, camara button remapped, etc ..
jznomoney said:
Still can't connect at even 3g at home with the new 920 update. So I doubt 4g will even work
Click to expand...
Click to collapse
Did you add the APN's ??

I'm not gonna bother with it then. I do need to try a different rom tho. Using Thrill Seeker and I like it but the DPI setting is too small for me.
Sent from my LG-P925 using xda premium

On my version of gb with 4g... bugs are have to use 3rd party dialer and the 4g works but not the signal bars just as others have reported. ill try to upload next day or two. You still have to flash kdz or baseband befire installing gb roms
Sent from my LG-P925 using XDA App

You can use dpi changer for that.
Sent from my LG-P925 using XDA App

I can confirm this is working on my ATT branded LG thrill.
Once i loaded the ROM it automatically restart the phone but stayed lg screen for long time,.I had to power+vol down+3d button to go to recovery mode and did factory reset ..working like charm.

adixtra said:
Link to thread http://forum.xda-developers.com/showthread.php?goto=newpost&t=1355879
Click to expand...
Click to collapse
Dear friends,
I tried to install by this method but did not continue the installation. There was a message "there is sufficient charge in the battery, recharge the device to continue", the battery has 80% load, it is normal that message appear?
This rom is for the LG Optimus 3D P-920. She will work on AT & T P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, etc.)

I was at 72 when I started. Went fine.
Sent from my LG-P920 using Tapatalk

Well, after flashing last night and spending some time using it, and getting some calls, so far so good.
Everything seems smoother overall, with less freezes. App compatibility seems better, and there is a definite difference in battery life.
Call quality and signal strength seem overall about the same, bit I thought it was pretty good before. Not quite as strong as my Atrix in bad areas, but not enough to bother me.
The only thing I haven't tried yet is 3g, or fauxG if you want to call it that. We have edge only at home. When I go back to work Monday I will be able to test that.
Sent from my LG-P920 using Tapatalk

This rom is for the LG Optimus 3D P-920. She will work on AT&T 4G thrill LG P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, Clockwork recovery, etc.)

stonyperson2 said:
This rom is for the LG Optimus 3D P-920. She will work on AT&T 4G thrill LG P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, Clockwork recovery, etc.)
Click to expand...
Click to collapse
There is no need to install anything beforehand the KDZ file has everything needed although it is recommended that after flashing to do a factory reset through recovery. It is in deed for the p920 but it works as well for the p925 although some users report the signal drops a little for the 4g although it works. Everything else function pretty well and most important battery life is longer.
---------- Post added at 10:34 AM ---------- Previous post was at 10:33 AM ----------
stonyperson2 said:
Dear friends,
I tried to install by this method but did not continue the installation. There was a message "there is sufficient charge in the battery, recharge the device to continue", the battery has 80% load, it is normal that message appear?
This rom is for the LG Optimus 3D P-920. She will work on AT & T P-925?
There is no risk of brick the device?
I need install something before? (baseband, kernel, etc.)
Click to expand...
Click to collapse
If you have CWM you can try this:
-Charge the battery to 100%
-reboot to recovery
-wipe battery stats
-retry to apply the KDZ file

josuelopezv said:
There is no need to install anything beforehand the KDZ file has everything needed although it is recommended that after flashing to do a factory reset through recovery. It is in deed for the p920 but it works as well for the p925 although some users report the signal drops a little for the 4g although it works. Everything else function pretty well and most important battery life is longer.
---------- Post added at 10:34 AM ---------- Previous post was at 10:33 AM ----------
If you have CWM you can try this:
-Charge the battery to 100%
-reboot to recovery
-wipe battery stats
-retry to apply the KDZ file
Click to expand...
Click to collapse
thanks to two. Although I have not CWM, because my device does not install it by any method posted here on xda. (Rom manager, ADB, nothing).
Edit.
Thank you guys,
gingerbread successfully installed.
Now, CWR.
(???)

i flash my 925 with the kzd rom for 920,and my device's name change from 925 to 920 .at first ,seem all right ,and smooth,but today ,found bluetooth wrong ,can't open ,enles reboot,wifi have the same problem too.sorry for my english

please help. bricked my droid 4

help i bricked my d4. i was running ics leak .215. i was trying to get gsm to work but i couldnt figure it out. so i figured if i put it back to gingerbread and applied the patch it might work. i downloaded a safestrop gingerbread rom and flashed it in bootstrap over my ics rom after wiping all data. now all i see is a black screen after the dual core screen. i just want it to work now on any rom ics or not. i dont care about gsm at this point. ive tried everything i could think of. ive tried reflashing ics in stock recovery but i get status 7 every time. ive also tried rsd lite with and without the replaced boot.img but it gave an error at 6/18. i will try any suggestions at this point.
p.s. i bought the phone off of craigslist so playing dumb to verizon is not an option.

I think using the D4 Utility ICS Only tool should get you back to a working .215.
Sent from my Droid 4

kwyrt said:
I think using the D4 Utility ICS Only tool should get you back to a working .215.
Sent from my Droid 4
Click to expand...
Click to collapse
i dont think will work because there is no usb debugging because i there is no android installed

daggggy said:
i dont think will work because there is no usb debugging because i there is no android installed
Click to expand...
Click to collapse
scratch that. i tried it and it worked but i then got a black screen. i reinstalled ics throught the stock recovery and the it booted up perfectly. thanks so much. i even managed to get gsm to work.

daggggy said:
scratch that. i tried it and it worked but i then got a black screen. i reinstalled ics throught the stock recovery and the it booted up perfectly. thanks so much. i even managed to get gsm to work.
Click to expand...
Click to collapse
Awesome! Glad it worked out!

I thought you could not revert back to GB once ICS was installed? But Im glad you were able to get past the brick

what was the fix?

Epinter's CM10 on ICS + JB (Lateral Flash from RAZRHD ROM)

I was simply curious and discovered that this RAZR HD ROM works (almost perfectly!) on my AHD running ICS. I assume this should fully work for JB, because it's made for that kernel. So if you're on JB, please try it and let us know.
>> Use Safestrap SLOT-1 to flash Epinter's rom: http://www.linuxmobile.org/razrhd/cm10
If your WIFI won't turn on, replace the drivers with the correct files from here: http://forum.xda-developers.com/showthread.php?t=2107662
Developers/Coders: How do we get the sensors working on ICS?? I've tried like mad to replace with stock-ics drivers, but I really don't know what I'm doing
Enjoy the pull-down toggles & customizable soft-keys!!
[edit: attached my screenshots; everything seems to work on ICS except the sensors & gps]

no go on JB 4.1.1, stuck in boot animation for 10mins twice.

progrockguy said:
I was simply curious and discovered that this RAZR HD ROM works (almost perfectly!) on my AHD running ICS. I assume this should fully work for JB, because it's made for that kernel. So if you're on JB, please try it and let us know.
Click to expand...
Click to collapse
What do you mean by almost perfectly... what was and was not working? Im still running on ICS and would love to get cm10 on my device.

JB 4.1.1 it boots for me but I get Encryption Unsuccessful. No go.
Sent from my MB886 using xda app-developers app

I can get the JB rom to boot, but i get a message about phone not successfully encrypted and requires a reset, wiping data now to see if it will work.
(installing to rom slot using safestrap)

coldfear00 said:
no go on JB 4.1.1, stuck in boot animation for 10mins twice.
Click to expand...
Click to collapse
Can you try deleting slot1 from Boot Options and creating a new one from scratch, wipe, then re-flash (and cross your fingers).

EcHoFiiVe said:
JB 4.1.1 it boots for me but I get Encryption Unsuccessful. No go.
Click to expand...
Click to collapse
Oneofonex1 said:
I can get the JB rom to boot, but i get a message about phone not successfully encrypted and requires a reset, wiping data now to see if it will work.
Click to expand...
Click to collapse
Is this the error message you guys are talking about? Also are you flashing to a freshly wiped (cache, dalvik, sys, factory data) slot or over an existing rom (i.e. dirty and not recommended)?
forum.xda-developers.com/showthread.php?t=1580902
If that's the bug then there is a fix for it, but I didn't encounter that at all on ics.

Clean flash. I have already seen that guide but we don't have partitioning in SS.
Sent from my MB886 using xda app-developers app

Damn this encryption bug. I did not see that coming due to simply being on JB.
I saw another thread say that removing the microsd and rebooting a couple of times might get you past the error message. This isn't ideal and reinserting would probably bring it back, but if it works we could then determine if all the sensors work on JB.

Nothing works on my side either I tried reboots w/o SD and tried booting off another ROM and then installing no-go
Sent from my MB886 using xda app-developers app

progrockguy said:
Is this the error message you guys are talking about? Also are you flashing to a freshly wiped (cache, dalvik, sys, factory data) slot or over an existing rom (i.e. dirty and not recommended)?
forum.xda-developers.com/showthread.php?t=1580902
If that's the bug then there is a fix for it, but I didn't encounter that at all on ics.
Click to expand...
Click to collapse
yes, exact error message but, will the fix from work on our phones (i'm a bit skeptical and cant be the 1st to jump and find out).

Oneofonex1 said:
yes, exact error message but, will the fix from work on our phones (i'm a bit skeptical and cant be the 1st to jump and find out).
Click to expand...
Click to collapse
Yeah that solution seems impractical. I think a simpler solution would be to work around the internal "sdcard." I'd remove anything that involves mounting/reading that area (/data/media) and see if it boots up then. I took a look at Batakang's init files and I noticed that his omit the /storage lines that this CM10 includes.
But my first priorities are these two cpa exams on the 14th and 28th. I've been wasting too much time on this new phone :/

progrockguy said:
Yeah that solution seems impractical. I think a simpler solution would be to work around the internal "sdcard." I'd remove anything that involves mounting/reading that area (/data/media) and see if it boots up then. I took a look at Batakang's init files and I noticed that his omit the /storage lines that this CM10 includes.
But my first priorities are these two cpa exams on the 14th and 28th. I've been wasting too much time on this new phone :/
Click to expand...
Click to collapse
tried removing everything (except twrp folder and safestrap) from external sd, still get encryption error. I appreciate your time, i hope your exams go well. good luck

Just a question how is everything going so far guys? Keep up the good work
ATRIX HD running BATAKANG 1.10

This ROM won't boot because were using SS and not CWM or TWRP
Sent from my MB886 using xda app-developers app

What if we use whirley eyes bootmanager like the atrix 2
Sent from my MB886 using xda app-developers app

EcHoFiiVe said:
This ROM won't boot because were using SS and not CWM or TWRP
Click to expand...
Click to collapse
This boots up just fine. The ROM creator himself says it can be flashed with Safestrap: http://forum.xda-developers.com/showthread.php?t=1993888
The issue is getting past the "Encryption Unsuccessful" message for those on JB. From what I've read it's because the internal sdcard cannot fully read. (Maybe a factory reset & SD wipe via stock would help by erasing any encrypted data?)

progrockguy said:
This boots up just fine. The ROM creator himself says it can be flashed with Safestrap: http://forum.xda-developers.com/showthread.php?t=1993888
The issue is getting past the "Encryption Unsuccessful" message for those on JB. From what I've read it's because the internal sdcard cannot fully read. (Maybe a factory reset & SD wipe via stock would help by erasing any encrypted data?)
Click to expand...
Click to collapse
No. Its because we use a bootstrap recovery. I don't think its SS compatible because the Encryption Unsuccessful error only happens because of the incompatibility.
Sent from my MB886 using xda app-developers app

LG P990 creating problems after ics update

2-3 weeks ago i updated my lg p990 to ics v30a using smart flash. and soon after upgrading i fond that ics is creating problems.
it crashes and phones reboots and dis happens all the time. sometimes it reboots when i am entering my sim pin. sometimes when am working on net and someone calls i pick up the phone reboots. i was so fu**ed up that i decided to root it bt that too didnt work.
What i used :-
1--> superoneclick --- it didnt work.
2--> root unlocker-- didnt work
3--> android root -- didnt work
4-->z4root -- didnt work
5--> even tried that bin4ry stuff that too didnt work. asks for restore i press restore and the shell runs forever.
6--> tried AIO toolkit.
rooted the custom rom. bt wtf problem still persists i seriously want to just root my phone please please just help me.. nothing seems to work exept the frequent rebooting of my phone.
7--> unlock root didnt work.

install a custom recovery with AIO, then install a stock based rom. I'm on djangomanoucheX, which is like stock, but fast and all. no lags, no reboots, everything works great.
Sent from my LG-P990 using xda premium

you mean to say installing the zip rom using CWM recovery??
if thats what u mean. then ive done that it fails. i think i might be using the wrong zip.
also tried to install kdz doesnt work says device not responding something.
i did that using the start upgrade ****. the window for selecting language never opens. only thing opens is the lg mobile support tool. and again when i click on upgrade start it shows message that lg support tool is already running.
the only thing working is the smartflash that i used to install that buggy ics rom.
i think flashing gingerbread using smartflash might work. bt i upgraded to ics coz of that buggy gingerbread.
i just want to ask why the hell my phone keeps on rebooting ???? (i cant even chat on whatsapp for more than 15 mins it reboots )
also sometimes when i put my phone on charging.
and do u thing gingerbread will root without that many problems??

shashank926 said:
you mean to say installing the zip rom using CWM recovery??
if thats what u mean. then ive done that it fails. i think i might be using the wrong zip.
also tried to install kdz doesnt work says device not responding something.
i did that using the start upgrade ****. the window for selecting language never opens. only thing opens is the lg mobile support tool. and again when i click on upgrade start it shows message that lg support tool is already running.
the only thing working is the smartflash that i used to install that buggy ics rom.
i think flashing gingerbread using smartflash might work. bt i upgraded to ics coz of that buggy gingerbread.
i just want to ask why the hell my phone keeps on rebooting ???? (i cant even chat on whatsapp for more than 15 mins it reboots )
also sometimes when i put my phone on charging.
and do u thing gingerbread will root without that many problems??
Click to expand...
Click to collapse
make a complete wipeor factory reset....use the ALL IN ONE TOOL KIT by Spyrosk....check for the thread in development section....and start from the scratch....will be good.DONT FORGET TO BACK UP YOUR DATA IF ANY
for GB, it was easy....for ICS it is not too difficult either

Or you could use Progmaq to restore your device to a clean cm7 build. This will wipe all your data. It wipes everything in your device, all partitions. A full guide can be found on xda here.
Sent from my LG-P990 using xda app-developers app

my device is fine now i just installed gingerbread cwm recovery via aio kit. then flashed cm 10.1 . everything is fine and stable now no more reboots.. thankyu all for ur help.

shashank926 said:
my device is fine now i just installed gingerbread cwm recovery via aio kit. then flashed cm 10.1 . everything is fine and stable now no more reboots.. thankyu all for ur help.
Click to expand...
Click to collapse
Am also having the same problem,
can you help me with a comprehensive step by step guide and files to use, (perhaps u can upload them to google drive and share with me.)
Am bored over. the phone keeps restarting and wifi does not even work.

saviour123 said:
Am also having the same problem,
can you help me with a comprehensive step by step guide and files to use, (perhaps u can upload them to google drive and share with me.)
Am bored over. the phone keeps restarting and wifi does not even work.
Click to expand...
Click to collapse
If you can't root your phone, that's mean that you don't have APX drivers. You can download them manually or you can just simply download AIO Tool kit and in main menu press letter ''I''. Before installing APX drivers you must have LG drivers for your phone.
When you're done with that, for rooting press 3, or for flashing stock rom press 7.
If you press 7, new window will pop up. It's smartflash tool which allows you to flash stock rom. You just need to find and download stock rom which one you would like to flash.
Hope it helps

[Q] Anyone succesfully reverted back to 4.2.2?

http://forum.xda-developers.com/showthread.php?t=2644083
according to that, you can revert to stock. im assuming 4.2.2? i want to go back to use the app that gives you recovery. (which is not yet available for kitkat) to use cm11
so question is, can i use that method to go back to 4.2.2? or would it take me to 4.4.4? my phone is not bricked. just stock 4.4.2
helppp. thankssss.

As long as you download the correct TOT file, that is the correct procedure that I have used on my at&t d950.
Sent from my LG-D950 using XDA Premium 4 mobile app

Remember to do a full wipe, because the applications from 4.4.2 to 4.2.2 they will not be worked and the phone will have a bootloop

Will this work if I'm on stock 4.4.2 and want to downgrade to 4.2.2?
Forgot to add I'm not rooted sorry

Cant get into Download Mode
I rooted my G-Flex and then took the update by unintentionally, the phone started freezing so i did a factory reset. Now i have no mobile data. So im trying to downgrade but i cant get into Download mode using the Volume up plug in method, any help?

I've used the d959 kdz and this method. Its a *****. Too me whole weekend to get it to work.
Sent from my LG-D959 using Tapatalk

mattwheat said:
I've used the d959 kdz and this method. Its a *****. Too me whole weekend to get it to work.
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
Damn I wanted to try the MIUI Rom but don't want the hassle. I'm guess this is the only way?

I don't think he has a d959 version of the miui yet. They are so close to getting cm11 ready for a beta. Radio is now working just gotta get the kernel to run stable. But as fast as they are coming along I wouldn't be surprised if its ready by the weekend.

mattwheat said:
I don't think he has a d959 version of the miui yet. They are so close to getting cm11 ready for a beta. Radio is now working just gotta get the kernel to run stable. But as fast as they are coming along I wouldn't be surprised if its ready by the weekend.
Click to expand...
Click to collapse
Gerett needs the 4.2 files and MIUI should work for the d959. I'm following the two Rom threads by the min. lol

sweets55 said:
Gerett needs the 4.2 files and MIUI should work for the d959. I'm following the two Rom threads by the min. lol
Click to expand...
Click to collapse
That's my fault. He asked for them a couple weeks ago and I got sidetracked with my son and work has been hell. But thanks for reminding me. I just sent him what he needed.

Tested the first d959 miui. No go as of right now. Boots but no screen. Just black screen. Still a little more work but I'm sure soon.

haven't had MIUI on any phone since I had my Note 2, and kinda miss it!
Gerret had a sweet miui rom on that phone, so I know how great it would be if it works out the Flex..

I was having the same issue and i read a post in another forum here on xda (can't remember which one or i would link you to it) that used QPST force the phone into download mode. I also was unable to get it into download mode using adb. At any rate, it was fairly simple to do and i have done it multiple times since then. Just Google a working download of QPST, install it, and then follow the instructions below.
1) make sure that you're port settings I the hidden menu on your phone are set too diag mode. Data can be enabled for them as well, but diag is a must.
2) set the dmapp usage setting to ON in the hidden menu as well. The hidden menu is accessed by dialing 3845#*XXX# in the dialer where XXX is replaced by the three digits of your model number e.g. for a T-Mobile G Flex (D959) it would be 3845#*959#.
3) connect the phone to the computer you installed QPST on and wait for the proper drives to install.
4) open QPST configuration and click "add new port". Select the lg diagnostics port and then click the start services menu tab.
5) start the Software Download service and then make sure that you're phone was properly recognized by the service.
6) click the multi-image tab and set your window to look as the photo below.
7) once the window looks like the photo, click the start button and then hit the abort button as soon as possible so as to not actually do anything other than just reset the phone.
8) if all goes as it's supposed to, your phone should have been reset into download mode. I hope this helped.
Sent from my LG-D959 using XDA Free mobile app