[Q] Xperia z installed CWM 6.0.2.8 Now BootLoop - Xperia Z Q&A, Help & Troubleshooting

Hi All,
Please help, I installed CWM 6.0.2.8 from Krabappel's zip. it has sent my phone into a continuous bootloop and won't boot out of recovery? can anyone help me to solve this please.
I have tried to restore backup but fails, what do I need to do to fix this..
Thanks all for any help you can offer...

PixelHated64 said:
Hi All,
Please help, I installed CWM 6.0.2.8 from Krabappel's zip. it has sent my phone into a continuous bootloop and won't boot out of recovery? can anyone help me to solve this please.
I have tried to restore backup but fails, what do I need to do to fix this..
Thanks all for any help you can offer...
Click to expand...
Click to collapse
it gets worse, it will not turn on now either........... HELLLLLLP

Probably just discarged. Charge it from a wallcharger for 24h. And I mean wallcharger, not usb port.
Then, tomorrow reflash using flashtool, sus or pc companion.

schaggo said:
Probably just discarged. Charge it from a wallcharger for 24h. And I mean wallcharger, not usb port.
Then, tomorrow reflash using flashtool, sus or pc companion.
Click to expand...
Click to collapse
Thanks buddy, I will get it on mains charge and try to flash stock firmware this evening. I will let you know the outcome...

Related

after naa14 kernel accidently restore bootloader lock

Now the phone can't turn on. I can't do just identify. Sorry if there is other thread like that, i just can't find. Thank you for helping me
wolf6621 said:
Now the phone can't turn on. I can't do just identify. Sorry if there is other thread like that, i just can't find. Thank you for helping me
Click to expand...
Click to collapse
Pull out the battery then replace it, try to connect it flash mode, if the led light doesn't turn on so you got hard brick.(try charging phone it might ran out of battery)
Have to repair in sony service center.
Sent via Ultimate GB
you can fix it with pcc.
so dont worry to much.cheers
minimum edition
i can turn on the flash mode and identify with s1tool, but i can't unlock with msm7227_semc script, because the cooked rom, and recovery can't boot up. The sony companion just waiting for turn it on...
wolf6621 said:
i can turn on the flash mode and identify with s1tool, but i can't unlock with msm7227_semc script, because the cooked rom, and recovery can't boot up. The sony companion just waiting for turn it on...
Click to expand...
Click to collapse
So it's fine:thumbup:
Reinstall drivers using Gordon's gate
Then download & flash stock 2,1,1 frimware.(or repair using pcc)
#unlock using flashtools is highly recommended
Sent via Ultimate GB
thank for help. Sorry for long thread. PCC repair worked fine thanks a lot
wolf6621 said:
thank for help. Sorry for long thread. PCC repair worked fine thanks a lot
Click to expand...
Click to collapse
if any problem with your phone when soft brick, please back to stock 2.1.1. version and stock kernel. you can try different methods as one told you in the above post.
if i am not wrong...if u lock bootloader with a custom kernel it gets hard bricked...so you are out of luck...

[Q] Sony Ericsson text won't disappear

hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
repair it with PCC
Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool
BlackRabbit1703 said:
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool
Click to expand...
Click to collapse
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8
Xaverek said:
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8
Click to expand...
Click to collapse
download
driver x8
gordon gates
install driver from C:\Flashtool\Driver
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
It's just soft brick so you should have flashtool and some ftf files for your device maybe stock firmware and baseband update so you can unbrick your soft bricked device for any time. Just enter the flash mode and flash it! That's it! Just some advice for you
PS. Don't say thanks. Click "Thanks"
Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
well done dude! :good:

[Q] Bricked Xperia X8 (E15i) HELP!!! May be hard brick

Okay please help. I have an unlocked bootloader (or had an unlocked bootloader) on my X8, it was rooted as well. I decided I'd like to get a custom Rom so I attempted to install GingerDX. I installed Clockwork Recover mod and tested it out to see if it was working. It was so I decided to back the phone up. The back up worked fine and I moved the backup to my computer. Then I restarted the phone to install the GingerDX rom. I cleared all the user data and I then went to install a zip file then chose the zip file. The installation completed so I pressed the back button and it said something about it being unsafe and that I will have no backup but I thought it was going to be fine as I had a backup of the kernel and the system on my computer.
I decided to ignore the warning as the installation said it was completed as well. But when I rebooted using Clockwork recovery mod the phone was stuck on the Sony Ericsson loading screen and was for around 10 minutes before I turned it off by removing the battery. I tried to enter the flash mode and reinstall the kernel on to the phone through flashtool but this failed and after that I can't seem to enter flash mode at all.
Please, is there any way for this to work? I'm guessing it's a hard brick but is there anything that I could try to fix it considering I have a system backup and the stock kernel backup as well? Anything will be greatly appreciated and rewarded.
it looks like you're on stock kernel. custom kernels do not show the se logo (haven't encountered one that does and i've tried quite a lot). are you sure you unlocked your bootloader? if you did, you haven't flashed a custom kernel yet.
don't worry it's only a soft brick. try using seus, pcc, or flashtool to recover it and go back stock rom. flash the rom, not the kernel.
did you download the stock kernel version of gdx? if not, that's probably why you encountered a bootloop.
edit: you also need to wipe dalvik cache and do a full wipe before flashing a rom
Just because i don't doesn't mean i can't.
cascabel said:
it looks like you're on stock kernel. custom kernels do not show the se logo (haven't encountered one that does and i've tried quite a lot). are you sure you unlocked your bootloader? if you did, you haven't flashed a custom kernel yet.
don't worry it's only a soft brick. try using seus, pcc, or flashtool to recover it and go back stock rom. flash the rom, not the kernel.
did you download the stock kernel version of gdx? if not, that's probably why you encountered a bootloop.
edit: you also need to wipe dalvik cache and do a full wipe before flashing a rom
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
Thanks a lot for the suggestion and I'm pretty sure I got the stock kernel version. Just in case I didn't can you send me a link if possible? Also I am on the stock kernel, I unlocked the bootloader but didn't bother flashing the kernel.
I've already tried PC Companion but I don't understand how to use it considering the phone actually cannot boot so I can't choose to connect the phone etc. Also I can't enter the clock work recovery mod anymore or the flash mode.
J_T_ said:
Thanks a lot for the suggestion and I'm pretty sure I got the stock kernel version. Just in case I didn't can you send me a link if possible? Also I am on the stock kernel, I unlocked the bootloader but didn't bother flashing the kernel.
I've already tried PC Companion but I don't understand how to use it considering the phone actually cannot boot so I can't choose to connect the phone etc. Also I can't enter the clock work recovery mod anymore or the flash mode.
Click to expand...
Click to collapse
just download the stock rom for x8 and flash it using flashtool. you do need pcc installed for that anyway.
well, i believe you when you say you have gdx's stock kernel version. maybe it's just that you didn't wipe cache, dalvik cache, and full wipe before flashing it?
just a Q though. why not flash a custom kernel? it makes a huge difference.
btw here's the link for stock: http://goo.im/devs/TeamFun/GingerDX/GingerDX-v031b-shakira-stock.zip
edit: you need to flash the stock se rom first to get out of the bootloop. then reroot you phone, install cwm, reboot to recovery and wipe, flash the rom. :thumbup:
Just because i don't doesn't mean i can't.
cascabel said:
just download the stock rom for x8 and flash it using flashtool. you do need pcc installed for that anyway.
well, i believe you when you say you have gdx's stock kernel version. maybe it's just that you didn't wipe cache, dalvik cache, and full wipe before flashing it?
just a Q though. why not flash a custom kernel? it makes a huge difference.
btw here's the link for stock: http://goo.im/devs/TeamFun/GingerDX/GingerDX-v031b-shakira-stock.zip
edit: you need to flash the stock se rom first to get out of the bootloop. then reroot you phone, install cwm, reboot to recovery and wipe, flash the rom. :thumbup:
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
:facepalm:
I've been such an idiot. After a couple of tries it seems that I can actually boot to flash mode so it was just as simple as using Sony Update Service and repairing the phone. I feel like a bit of a tard. Anyway, this thread is resolved. Thanks for all your help and I've :thumbup: but just as a last note what kernel will go well with the GingerDX Rom?
And again thanks for all the quick help man. greatly appreciated.
J_T_ said:
:facepalm:
I've been such an idiot. After a couple of tries it seems that I can actually boot to flash mode so it was just as simple as using Sony Update Service and repairing the phone. I feel like a bit of a tard. Anyway, this thread is resolved. Thanks for all your help and I've :thumbup: but just as a last note what kernel will go well with the GingerDX Rom?
And again thanks for all the quick help man. greatly appreciated.
Click to expand...
Click to collapse
lol. no worries. believe me, i've been there too.
glad you found the solution. :thumbup:
Just because i don't doesn't mean i can't.
I got hard brick too
please help me! My X8 cannot boot and green led is off!
longlnn said:
please help me! My X8 cannot boot and green led is off!
Click to expand...
Click to collapse
what did you do? what happens when you try to power it on?
Just because i don't doesn't mean i can't.
cascabel said:
what did you do? what happens when you try to power it on?
Click to expand...
Click to collapse
i try power it on but don't have any sign life.
no led, no boot, no vibrate
longlnn said:
i try power it on but don't have any sign life.
no led, no boot, no vibrate
Click to expand...
Click to collapse
try charging it fir a few minutes and try again. if not, you'll have to send it to sony.
did you try unlocking your bootloader?
Just because i don't doesn't mean i can't.
Completely dead?
cascabel said:
try charging it fir a few minutes and try again. if not, you'll have to send it to sony.
did you try unlocking your bootloader?
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
I tried unlocking my bootloader. The phone turned off an since then no sign of life...
No charging, no led flashing, doesn't turn on, won't go in flash mode.
SEUS, PCC and Flashtool doesn't recognise it.
Is it hardbicked? Is anything that can be done?
Waranty expired too!
Spinalonga said:
I tried unlocking my bootloader. The phone turned off an since then no sign of life...
No charging, no led flashing, doesn't turn on, won't go in flash mode.
SEUS, PCC and Flashtool doesn't recognise it.
Is it hardbicked? Is anything that can be done?
Waranty expired too!
Click to expand...
Click to collapse
what date does it have on the back of the phonen 11w29+? looks like it's a hard brick though.. those tools Can't revive it. you'll have to send it to sony to get it repaired..
Just because i don't doesn't mean i can't.
cascabel said:
what date does it have on the back of the phonen 11w29+? looks like it's a hard brick though.. those tools Can't revive it. you'll have to send it to sony to get it repaired..
Just because i don't doesn't mean i can't.
Click to expand...
Click to collapse
11W43
Does anybody happen to know if there's any chance that my hometown Sony service can handle that, or they will gonna send it at a central somewhere else?
Spinalonga said:
11W43
Does anybody happen to know if there's any chance that my hometown Sony service can handle that, or they will gonna send it at a central somewhere else?
Click to expand...
Click to collapse
send it to a nearby Sony service center because your manufacturing date isn't safe to perform the unlocking of the bootloader, and yes, it is indeed a hard brick
I have same problem, sony service center solved my problem with any cost, free for me.
Sent from my AD683G using xda app-developers app
I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!
mytch420 said:
I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!
Click to expand...
Click to collapse
try charging it first my friend. leave it for about 20mins, check if it has life or if Flashtool would recognize it
mytch420 said:
I've had the same problem aswell, but my battery says 10W47?!
No Green LED, no nothing when I try to turn it on.
Help1?!
Click to expand...
Click to collapse
the date on the battery is irrelevant. what's the date at the back of your phone?
Just because i don't doesn't mean i can't.
I have left it charging over night, Im getting no signs of life from this in anyway.
The back of my phone says 10W51?
I cant get into flash mode
Also: I have an old Vivaz here and the X8, The vivaz was missing a battery and It turns out it uses the same battery as the x8, Ive tried using this battery in the vivaz but it wont turn on or charge, Is the battery gone?
mytch420 said:
I have left it charging over night, Im getting no signs of life from this in anyway.
The back of my phone says 10W51?
I cant get into flash mode
Also: I have an old Vivaz here and the X8, The vivaz was missing a battery and It turns out it uses the same battery as the x8, Ive tried using this battery in the vivaz but it wont turn on or charge, Is the battery gone?
Click to expand...
Click to collapse
looks like the battery may be the issue. can the battery of the vivaz (if it's charged) power on your x8?
Just because i don't doesn't mean i can't.

[Q] Xperia z not booting after flashing kernel ;(

I am extremely new to root n stuff, i successfully rooted using happy, doomlord binary and was preety happy . flashed few patchs and was happy.
Finally thought i flashing Pure X audio for xperia z and my mistake i saved DoomLord kernal on the same place. i mis selected Doomslord kernel instaed of PureXaudio ;( and finnally when i try hit reboot - it is not booting up
PLZ help !!! what do i need to do to get in to recovery tried power volume up and down , it vibrate but screen doesn't turn on or no progress ;(
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
doing it
Bairei said:
Is flash or fast boot mode working properly?
Try to flash kernel again, or flash stock rom thru flashtool
Click to expand...
Click to collapse
IT is not at all switching on , blank screen ;(
i tried to enter TWRP recovery , holding power on and tapping voume up - no go ;(
is there any other way to get in to revcovery ? i am preety new .. yes i am installing flashtool now and should i try tft ROM or can i flash by back up ?? i am not sure
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Trying it .. small query , pl help
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Thanks a lot, i am doing it right now, downloading kernel
But my doubt is phone seem completely dead - when i hold power button it vibrates and red LED blinks, is this normal behavior ??.
no loader found for this device ;(
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Now i am stuck at teh screen where it says 'no loader found for this device flashtool' can't go any further.
My bootloader is locked, should it be unlocked to get this done
please help !!
No you don't need to unlock the boot loader to flash via flash tool'you need the drivers
http://developer.sonymobile.com/services/flash-tool/
you will need to unlock if you want to flash a custom kernel ..
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Sent from my Nexus 7 using Tapatalk 2
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
vodanhdaisu said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2229250
Sent from my C6603 using xda premium
fish droid said:
Try using Sony update service sus to repair your phone
http://www.sonymobile.com/gb/tools/update-service/
Click to expand...
Click to collapse
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Xperia z bricked after doom Lord kernel! Help pls
QualQuek said:
You can't use SUS if you have already flashed your phone with a custom kernel, you can only use flashtool.
Just take a look to the link of gm007.
Click to expand...
Click to collapse
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
hOtsacE22 said:
Flash via flashtool bro.and dont use custom kernel ,use the stock kernel of doormlord one if ur locked bootloader.
Sent from my C6603
Click to expand...
Click to collapse
You can't flash unsigned kernels on locked bootloaders!! Just stock kernel.sin from identical FW!
Sent from my C6603 using XDA Premium 4 mobile app
PLEASE HELP i flash DooMKernel via cwm after reboot mobile not turn on push power button, the phone vibrates but does not awake
then i flash ftf via flashtool its turn on but again cant use any of the kenerl ..i have unlocked boot loader i tried to clean cash dalvik etc but always get soft bricked >PLEASE HELP
---------- Post added at 04:04 PM ---------- Previous post was at 03:06 PM ----------
Ronco87 said:
I am having the same problem. I have tried everything I know of including fastboot, flash mode, sus, pc companion, and so on. Still my phone won't even blink anymore. It doesn't seem to charge either. I don't know what to do. Someone please help! I was running creskole romantic and goo manager recommended the install of the doom Lord kernel v.18. Sadly, my phone never rebooted. Complete black screen.
Click to expand...
Click to collapse
same with me .........i try to flash it via cwm but after reboot mobile not turn on then i flash its original stock 2.67 kernel via flashtool my mobile turn on but wifi didnt works ..
then i flash
eXistenZ v4.3.5 ultra edition wifi now working but again : but cant install any of the kernels from doom kernel and others please help
my xperia Z cant turn on
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
raveldom said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
will it boot if i flash once again the latest firmware
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
kingvortex said:
Is your bootloader unlocked? If not, you cannot run a custom kernel.
Flashing just the stock kernel for your firmware with Flashtool should fix your problem.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
yes it is unlocked,i try to look everywhere on the internet and finally resolved d issues with d phone
problem!!
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
salujapulkit said:
kernel not getting flashed through cwm and xperia z is rebooting again and again.what to do ?
Click to expand...
Click to collapse
Flash the img file from fastboot
Xperia Z not booting up after flashing
Hello guys, I badly need help in fixing my Xperia z c6603 device. I flashed the device using the ftf file from xperifirm and now my device does not boot up and stuck in blank screen.
Kindly assist.

[Q] xperia sp stuck on boot animation after restarting again and again

hi i am new here. yesterday i flashed existenz 2.0 rom on sony xperia sp. All went right. then i flashed boot animation on it . then i restarted but it stucks on animation. now nothing is happening i have tried charging it but i think it doesnot do charging in switch off mode, so it starts again and does some charging then on animation it stucks and charging stopps and then after some time it drains the battery and gets swiched off. Then again this process continues. it is not going into recovery mode, flash mode , fastboot mode.
so if you can help me in this situation. pleeassssse
Sounds like a pretty bad bootloop does your PC recognise anything when you connect it? You need to go back to stock or at least to a working ROM. The long and short of it is to fix it you are going to need adb, recovery (if you have a nandroid backup) or flash mode. If you can't get any of them I think its bricked
Sent from my C5303 using xda app-developers app
i had similair problem to this no fastboot because of rebooting problem i had to take back off phone press and hold hard reset button with a pen and connect usb while pressing up all at the same bloody time not that easy but it did go to fastboot after a few attempts (might not work first time keep trying took me about 5 attemps)good luck
Are your Xperia Bootloader is unlocked? To install the custom ROM, you need to unlock the bootloader.
http://forum.xda-developers.com/showthread.php?t=2354721
pc is not recognising..
Captain Sweatpants said:
Sounds like a pretty bad bootloop does your PC recognise anything when you connect it? You need to go back to stock or at least to a working ROM. The long and short of it is to fix it you are going to need adb, recovery (if you have a nandroid backup) or flash mode. If you can't get any of them I think its bricked
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
my pc starts to recognise but then it gets switched off.
my fastbooot not connecting.
ireaper4592 said:
i had similair problem to this no fastboot because of rebooting problem i had to take back off phone press and hold hard reset button with a pen and connect usb while pressing up all at the same bloody time not that easy but it did go to fastboot after a few attempts (might not work first time keep trying took me about 5 attemps)good luck
Click to expand...
Click to collapse
for connecting to fastboot mode my phone should be charged about 20% but the problem is its not charging.
Rupant said:
for connecting to fastboot mode my phone should be charged about 20% but the problem is its not charging.
Click to expand...
Click to collapse
Any idea how much charge is in the phone? I think you will have to keep trying to get into fastboot or recovery try power and then vol up/down or camera depending on what your recovery is I can send you a full nandroid backup of stock if you need one. You need to break into the boot cycle get into recovery (i am assuming you have installed a recovery on this device) timing will probably have a lot to do with it.
Programming is a race between engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
make sure to use the stock sony usb cable as i think flashmode doesnt work well with other usb cables. also try the other usb ports on your computer. technically,you should still be able to enter flashmode and recovery.
no idea about charge?
Captain Sweatpants said:
Any idea how much charge is in the phone? I think you will have to keep trying to get into fastboot or recovery try power and then vol up/down or camera depending on what your recovery is I can send you a full nandroid backup of stock if you need one. You need to break into the boot cycle get into recovery (i am assuming you have installed a recovery on this device) timing will probably have a lot to do with it.
Programming is a race between engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
Click to expand...
Click to collapse
no idea abouut charge. its has connected in fastboot mode but for very few secs till the charge is there.recovry is not working which is the main problem.
original cable
XPERIAAplooper said:
make sure to use the stock sony usb cable as i think flashmode doesnt work well with other usb cables. also try the other usb ports on your computer. technically,you should still be able to enter flashmode and recovery.
Click to expand...
Click to collapse
i am using the same usb cable that came with the phone.
Smankusors said:
Are your Xperia Bootloader is unlocked? To install the custom ROM, you need to unlock the bootloader.
http://forum.xda-developers.com/showthread.php?t=2354721
Click to expand...
Click to collapse
did you read my message?
locked bootloader
Smankusors said:
did you read my message?
Click to expand...
Click to collapse
rom which i installed can be also on locked bootloader.:good:
Rupant said:
rom which i installed can be also on locked bootloader.:good:
Click to expand...
Click to collapse
how about the latest version of eXistenZ?
You are flashing the 2.0 but the latest version is eXistenZ Ultra 2.1.5
http://forum.xda-developers.com/showthread.php?t=2478019
2.1.5 is ota update
Smankusors said:
how about the latest version of eXistenZ?
You are flashing the 2.0 but the latest version is eXistenZ Ultra 2.1.5
http://forum.xda-developers.com/showthread.php?t=2478019
Click to expand...
Click to collapse
2.1.5 is a ota update which i had updated to.
Rupant said:
2.1.5 is a ota update which i had updated to.
Click to expand...
Click to collapse
how about clearing data, dalvik, cache?
No need to worry I had given my mobile to service center now it's up and running. Thanks everyone for their suggestions.
Sent from my C5302 using XDA Premium 4 mobile app
mine too same problem
Rupant said:
No need to worry I had given my mobile to service center now it's up and running. Thanks everyone for their suggestions.
Sent from my C5302 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
dude wat to do....?? how much it costs in the service centre.....??
xperia277 said:
dude wat to do....?? how much it costs in the service centre.....??
Click to expand...
Click to collapse
what is the problem u are facing? give details
Rupant said:
what is the problem u are facing? give details
Click to expand...
Click to collapse
my xperia sp 5302 rooted wasnt starting, thank god for this awesome forum i got the solution.
Actually my phone was in a bad bootloop, so what i did was repaired the software using sony pc companion...thanks anyways dude

Categories

Resources