Phone: Samsung Captivate I-896, with AT&T stock Android 2.2 flashed to it. Rooted and unlocked.
Action: Deleted some *.odex files from Root/Data/App, following a guide to get around the "out of space" message while trying to install software. Cleared Delviks cache directory.
Problem: First restart after above actions(which didn't resolve the out of space message issue), phone shows start-up animations, gets stuck with black screen. Left like this overnight, nothing happens. Vibrates every 50 seconds or so. Respons to hardware Vol+ press with the home/back/menu backlight. Otherwise, no response to anything, black screen(backlight on). Does not receive phone calls. I do not know for sure if the action listed above is the one that caused this situation, but I assume so since it was the last action taken before the issue appeared.
Solutions attempted: Tried every possible permutation/combination of buttons/usb cable/etc/ restarts etc. listed here: http://forum.xda-developers.com/showthread.php?t=858765&page=1, except Jig. The phone would not go into recovery or DL mode.
Question.
Am I correct in assuming that forcing the phone into recovery mode and reflashing a new system(or reflashing the old one) is the only way to get the phone to work again?
There is no way to "soft-reset" the phone, with all settings reverted back to stock, if it does not boot up completely?
Titerepayaso said:
Phone: Samsung Captivate I-896, with AT&T stock Android 2.2 flashed to it. Rooted and unlocked.
Action: Deleted some *.odex files from Root/Data/App, following a guide to get around the "out of space" message while trying to install software. Cleared Delviks cache directory.
Problem: First restart after above actions(which didn't resolve the out of space message issue), phone shows start-up animations, gets stuck with black screen. Left like this overnight, nothing happens. Vibrates every 50 seconds or so. Respons to hardware Vol+ press with the home/back/menu backlight. Otherwise, no response to anything, black screen(backlight on). Does not receive phone calls. I do not know for sure if the action listed above is the one that caused this situation, but I assume so since it was the last action taken before the issue appeared.
Solutions attempted: Tried every possible permutation/combination of buttons/usb cable/etc/ restarts etc. listed here: http://forum.xda-developers.com/showthread.php?t=858765&page=1, except Jig. The phone would not go into recovery or DL mode.
Question.
Am I correct in assuming that forcing the phone into recovery mode and reflashing a new system(or reflashing the old one) is the only way to get the phone to work again?
There is no way to "soft-reset" the phone, with all settings reverted back to stock, if it does not boot up completely?
Click to expand...
Click to collapse
Sounds pretty accurate. You'll have to get a jig to get in download mode, flash stock Odin KK4 to fix w/e happened during your testing.
Thanks Bwolf. I just tried ADB console on a different computer and it connects to the device just fine in spite of black screen. I guess I had one thing right, USB DEBUGGING enabled before this whole deal.
Question: is there any way I can restore the phone using the console without wiping everything?
Titerepayaso said:
Thanks Bwolf. I just tried ADB console on a different computer and it connects to the device just fine in spite of black screen. I guess I had one thing right, USB DEBUGGING enabled before this whole deal.
Question: is there any way I can restore the phone using the console without wiping everything?
Click to expand...
Click to collapse
Make a backup with ADB.
Once that's done, push download mode with it and get Odin KK4 (without bootloaders). You'll have to start from there to fix w/e went wrong.
You don't have to wipe your sd doing so but you will lose your apps and such. If you backed up your phone with your Play Store account, it will re-download your apps as you're done booting up.
To get back up where you were, grab Corn Kernel, flash it with Odin 1.87 and then follow the full instructions of the ROM you wanna use.
Related
Hi,
I want to say that everyone is very helpful in this forum and you all rock. I'm having some problems with my rooted samsung captivate. I installed the I9000 Full rom, and it was running fine for a few days then I notice it was very sluggish, so I did a factory restore, but data and apps didn't delete. So I then when in to recovery (R2) and deleted cache and all user data files, then it did a factory restore, and it went in boot up pass the att and samsung S i9000 screen and when to the lock screen, but once I unlock the phone, its just in the black screen, when I click and hold on to the home button it goes to recent, no recnet application and under Task Manager, I have 0 active applications. It won't load any programs or apps. I tried restoring the phone by holding the down volume key and power on button, it goes to R2 recovery and then reinstall package, but it can't find the package. I have it on the memory card, but I guess I deleted it from the internal memory when I did a factory restore. Am I screw, or can someone guide me through this and fix my fone. Thanks in advance. XDA Rules.
Odin one click back to stock, assuming you can get into download mode. Also do a master clear just to be sure. A fresh start might be just what your Captivate needs.
Sent from my SAMSUNG-SGH-I897 using XDA App
The same thing happened to me yesterday. Phone was on, battery fully charged. I got on my flight and left it on (forgot I guess) and when I got off the flight, the screen was black. I'll also add, that over the past 3 days the phone was starting to get extremely sluggish (for no reason that I can think of). But back to the rest of the story...
I couldn't get it to turn on, so I pulled the battery and tried again. This time I got the AT&T logo and the Samsung animation. Once the animation was completed the screen goes black.
The phone is still on. How do I know? If I touch any of the bottom buttons they light up.... and stay lit up until I do a battery pull.
Deleted/cleared everything, same behaviour.
I tried reflashing JI6, it works but fails to reinstall the packages, otherwise same behaviour.
I tried reflashing JF6, same behaviour.
The flashes always succeed, but always end up in failure.
Now for the interesting part. I went into recovery mode on JI6. I try to format the internal /sdcard, I get a message that it cannot mount /sdcard /dev... not found.
So to recap, phone not working, recovery mode available, download mode available. adb doesn't seem to be working, but if someone can tell me how to access the phone with "adb shell" while in recovery mode, I might be able to diagnose why /dev... is not mounting... Or at least how I could fix it using adb.
Any help would be appreciated. I'm traveling and needless to say, this is a huge inconvenience, I'm lucky I had my backup phone to at least be able to get online and be able to make calls.
HI,
thanks for quick response. I can get to the recovery mode, where the android holding the shovel. But when I load Odin one click, it don't seem to detect and do anything. o success 0 failed. I installed the samsung captivate windows 7 drivers, the funny thing is when I plug my brink phone in the usb port, it say unrecongize usb. Any other suggestions. Thanks
hksmr2 said:
HI,
thanks for quick response. I can get to the recovery mode, where the android holding the shovel. But when I load Odin one click, it don't seem to detect and do anything. o success 0 failed. I installed the samsung captivate windows 7 drivers, the funny thing is when I plug my brink phone in the usb port, it say unrecongize usb. Any other suggestions. Thanks
Click to expand...
Click to collapse
the shovel is NOT recovery mode, it is download mode.
have ODIN running BEFORE you get your phone in download mode
OK guys I really badly need some help. My phone is in a non-workable state and I am starting to run out of options.
I did some mistakes but I will try to take out the details to list mostly the fact, hoping someone will take the time to give me directions.
- I have a galaxy s I9000 (switzerland/orange)
- I had upgraded to 2.2 via Kies.
- I got tired of the phone becoming increasingly slow. I found out about voodoo lag fix. I read 3000 forum posts, documentation and stuff, and when everything seemd easy enough, I installed voodoo via Odin.
- Here problems started. After installing voodoo, the phone booted, but the robot voice said "convert data partition. Not enough space on partition". Then again. And again. It was stuck in a boot loop. This problem doesn't seem to be documented anywhere i could find. The only instructions I could find on how to disable voodoo were to create some files on the disk, not very helpful when you can't boot the phone.
- I found a couple of threads with people who had the same message, and the advice their were given was to flash another rom.
- So I went to samfirmware.com and downloaded 2.2.1 for I9000 (JS8). I installed it through Odin. The phone booted, showed me the Galaxy S screen, then went black. Then it would vibrate every 20 seconds or so. Once, then 3 times in a row. I waited 30 minutes because in some places it said that may take long, but the situation didn't change. I rebooted, tried again after taking about the battery, wiped data, reset factory settings etc. The phone state wouldn't change, and I started to get a little desperate, because this was a stock rom, and if that didn't work...
- I read 3000 more threads, and phone a guy who had been in this situation, and got out of it by first installing "Eugene's JK2 froyo that never bricks" and then after wards reinstalling the stock rom.
- So I installed Eugene's rom. I knew it was trouble that it was a vibrant's rom, but I figured, I had read everywhere that as long as your phone supported download mode you could still always re-flash a new rom, so I decided give it a try.
- And the phone booted. Asked my pin, loaded stock android and all. I was happy at first, but then new trouble came. Now, whenever I plug in the USB, the phone's screen goes black after 4-5 seconds. When I unplug it, phone reboots. No charging battery appears when I plug the turned off phone on the charger.
- And worst of all, the buttons got mixed up. Vol up is vol down now. But more of a problem, 3 button recovery and 3 button download mode don't work anymore. I couldn't find a way to get them back. So I can't flash a new rom with Odin :-/.
- My latest was to install rom manager since I can access the market. I downloaded the tedgy rom. Installed the "clockwork recovery mode" from Rom Manager. It asked me if I had I9000 or vibrant, wasn't sure what it expected since I have now a vibrant rom on an I9000, but I put in I9000. Then I reboot telling rom manager to install Tedgy. I get a recovery mode screen which offers to reboot/reinstall packages/wipe data, then does a couple of operations, and finally gets stuck on :
can't open /cache/update.zip
(bad)
installation aborted
So there I go, with a vibrant rom on my I9000 (rooted, at least), a phone that can boot a half-functionnal android, but with a useless cable plug, an unchargeable battery, and a download mode I couldn't find... And waiting for my wife to get back with her phone so I can charge my battery again...
Any help or lead to help me get another rom installed on this phone again would be *greatly* appreciated. What other ways do I have to access download mode ? Or is there a way to get to it despite my buttons being messed up ? Maybe the rom manager issue can be fixed ?
OK well I got out of it somehow.
In case someone else had this same issue, here's how I got out of it :
1) Install ADB.
2) launch Odin
3) go to adb folder in command line and type "adb reboot download" but no enter just yet.
4) plug the usb cable on the phone.
5) type enter in the adb shell in the small window of opportunity you have before the screen goes blank. This reboots the download mode and allows new flashing via odin.
Any answer for this thread?
Did you fix the problem?
I'm stuck with the same case...
I tried a flash and think i messed my tab...now its just a black screen with a faint light in the background like its on but its no images.......my battery icon pops up then distorts away and thats it ....can get into download mode but not recovery.....tried holding all 3 buttons got this lil android dude in the corner with a sign sayin something about power reset but cant select nothing......help me please......
Put it in d/l mode and flash one of the stock roms with Heimdall.
D
i tried a stock flash with heimdall it flashed successfully but i still get the SAMSUNG logo that flashes and go away,buttons light up at the bottom,can go in download mode but not reboot mode,phone stay on with a faint light ,so i assume that its on somehow.....help
Did you follow this exactly?
http://forum.xda-developers.com/showthread.php?t=967175
One thing I missed here before was to wipe data and cache. Otherwise I go into boot loop.
how to get recovery mode
i cant wipe nothing because i cant get to recovery,just download mode
done it step by step
i followed evrything it flashed successfully but when it rebooted i turned off.and tried recovery but nothing......
chubbyflood said:
i followed evrything it flashed successfully but when it rebooted i turned off.and tried recovery but nothing......
Click to expand...
Click to collapse
Use UnBrickable Mod
http://forum.xda-developers.com/showthread.php?t=1341753
Although you get a black screen on boot, it might still be working....
Chubbyflood,
If you are in the same situation as I am then the tab is still working, you are just getting black screen on boot up. It played tricks on me for ages when I was first rooting by tablet; but it turned out it is just the boot up screen that isn't showing.
This is my situation:
-Press and hold Power button to turn on.
-I see the Galaxy Tab / Samsung initial boot image for about 1 second, and also hear the "boot chime"
-Then the screen goes completely blank (but you can tell it is still on with a little light showing.
-The four "hard button" lights will light up briefly a couple times
-Wait approximately 30 seconds to a minute (to be safe and give the tablet time to boot up - it is actually booting up)
-Tab the Power button once, to turn the tablet off (now the screen is clearly off)
-Tab the Power button again, and the tablet will be up and running as normal.
I am guessing the boot animation / images are failing in some way, but the tablet is booting up as normal.
I've just learned to live with it, because I haven't had a chance to figure out what's going on, but it honestly took me a good hour or so, and a few (unnecessary) flashes, before I realized the thing was up and running fine, it just need to have the button pressed on and off.
One final thing to mention; don't have the tablet plugged into anything. I seem to remember leaving it plugged into the PC didn't help (I think).
Hope that makes sense.
Cheers
Ed.
Has your situation been resolved?
I am in the same boat. What I have done to temporarily fix this was to Flash a ROM that uses Hemdall and it will boot as flukebu stated but only with the Galaxy Cubed ROM.
I cannot get the factory files to boot as you have stated.
I have continually tried to return to stock using the files provided on this forum and all "unbrick" posts.
While flashing the stock images everything completes and works well. The device reboots and the Samsung Splash screen appears. Once it appears it disappears and scrambles the screen. I believe it then goes into a bootloop which easily enough I could access factory recovery to correct but when I do attempt to access factory recovery the screen is as posted above (black but illuminated).
Once I flashed Galaxy Cubed ROM and it booted I hit the power button and the locksreen appeared. I can tell you I was excited but there are some issues with that ROM I have not tried to correct yet because my main goal is to return to stock.
Even with this ROM working correctly I have attempted to access CWM once installed to complete a Data Wipe and that does not show up either.
I would really like to find a solution to this I want to return to stock and not have this custom ROM running.
Juiced_RL said:
Has your situation been resolved?
I am in the same boat. What I have done to temporarily fix this was to Flash a ROM that uses Hemdall and it will boot as flukebu stated but only with the Galaxy Cubed ROM.
I cannot get the factory files to boot as you have stated.
I have continually tried to return to stock using the files provided on this forum and all "unbrick" posts.
While flashing the stock images everything completes and works well. The device reboots and the Samsung Splash screen appears. Once it appears it disappears and scrambles the screen. I believe it then goes into a bootloop which easily enough I could access factory recovery to correct but when I do attempt to access factory recovery the screen is as posted above (black but illuminated).
Once I flashed Galaxy Cubed ROM and it booted I hit the power button and the locksreen appeared. I can tell you I was excited but there are some issues with that ROM I have not tried to correct yet because my main goal is to return to stock.
Even with this ROM working correctly I have attempted to access CWM once installed to complete a Data Wipe and that does not show up either.
I would really like to find a solution to this I want to return to stock and not have this custom ROM running.
Click to expand...
Click to collapse
Have you found a resolution to this? Mine tab is doing the exact same thing as yours after the cubed rom.
Running a Captivate that I rooted and upgraded to 2.3 over a year ago. All was working well. This week it began freezing after it fully loaded after a reboot or power-on. It will go through the ATT, the Corn logo, and the S animation. It will scan the USB storage devides (internal and external) and then quietly freeze. It will sit there with the wallpaper moving around, but the first key stroke done after all has been loaded up will cause everything to freeze.
While it is starting up, I can enter my passcode, use all of the menu buttons and get to applications or settings. However, once the scanning is done, wherever I am will freeze. I can get all the way through the perform a factory reset procedure before the scanning is done, but it I will run out of time before the phone can start the reset.
Seems like something in 2.3 got corrupted and I need to reload the software without going through the boot-up (I went through Kies, but once the phone booted up, it disappeared from Kies and it told me the phone was disconnected).
Any step by step to either repair 2.3 or to install another droid system prior to the phone booting up? I'd appreciate the help.
ktvanhorne said:
Running a Captivate that I rooted and upgraded to 2.3 over a year ago. All was working well. This week it began freezing after it fully loaded after a reboot or power-on. It will go through the ATT, the Corn logo, and the S animation. It will scan the USB storage devides (internal and external) and then quietly freeze. It will sit there with the wallpaper moving around, but the first key stroke done after all has been loaded up will cause everything to freeze.
While it is starting up, I can enter my passcode, use all of the menu buttons and get to applications or settings. However, once the scanning is done, wherever I am will freeze. I can get all the way through the perform a factory reset procedure before the scanning is done, but it I will run out of time before the phone can start the reset.
Seems like something in 2.3 got corrupted and I need to reload the software without going through the boot-up (I went through Kies, but once the phone booted up, it disappeared from Kies and it told me the phone was disconnected).
Any step by step to either repair 2.3 or to install another droid system prior to the phone booting up? I'd appreciate the help.
Click to expand...
Click to collapse
You could grab Odin KK4 without bootloaders and flash it in download mode.
From there, use Odin 1.87 to flash Corn kernel if you wanna be rooted and have a custom recovery again.
Then it's your choice whether you wanna stay on 2.3 or look into 4.2 ROMs.
BWolf56 said:
You could grab Odin KK4 without bootloaders and flash it in download mode.
From there, use Odin 1.87 to flash Corn kernel if you wanna be rooted and have a custom recovery again.
Then it's your choice whether you wanna stay on 2.3 or look into 4.2 ROMs.
Click to expand...
Click to collapse
So, do you agree with me that it seems to be a software issue? Or is this something to try and see if all goes well with the new install? I have no problem if this is something to try since nothing else is working, but I am just curious if my diagnosis is correct.
Thanks for the quick respond.
KT
ktvanhorne said:
So, do you agree with me that it seems to be a software issue? Or is this something to try and see if all goes well with the new install? I have no problem if this is something to try since nothing else is working, but I am just curious if my diagnosis is correct.
Thanks for the quick respond.
KT
Click to expand...
Click to collapse
My guess is that something got corrupted, so yes, software issue. Find the required Odin and 2.3 kernel for the I9000 and flash them in download mode. It should run fine after that.
Got things resolved
Thanks for the help. I tried to follow your steps, but I could never get the phone connected to the PC. It would charge, but not connect to let Odin in. (It will connect to another PC without issues. I uninstalled and reinstalled the drivers, but no dice). However, in the process of putting the phone into download mode and rebooting it back somehow got me into the recovery screen. I did a factory reset through there and it worked.
Thanks for the help of all the contributers to the site.
K
Hello,
I've been rooted for a few months now and have never had any problems. I wanted to use that Milk Music app from Samsung so I followed the instructions and was able to get it working on my phone and have been for awhile. I recently decided it would be a good idea to change the build.prop file back to its original state, so I copied and pasted it in using Root Browser. (I had made a backup file stored elsewhere). Once I did that I rebooted my phone for the changes to take effect. After I did that I cannot get my phone to turn back on. It displays the LG animated logo screen and then goes completely black. The light on top of the phone radiates blue/green. I've read through several forums about this issue and have tried everything in order to get it to work and for some reason, using my computer and ADB always gives me an error: device not found. I have installed the drivers and everything. Anyone else run in to this problem before? I would really appreciate it.
If you are on stock rom, just rooted. I would think you should be able to factory reset through stock recovery.
Confirm the process but i think you power completely off. Then hold volume down and power at the same time when you see the lg logo release both buttons then press both buttons and hold them.
Should take you to factory reset.
Not 100% certain but this will probably be your next step if you can't get a computer to see it.
Good luck
2111
The factory data reset didn't really change anything. For some reason I cannot boot into recovery mode either. I can put it in download mode though, but my computer still has a problem recognizing it.
brody_low said:
The factory data reset didn't really change anything. For some reason I cannot boot into recovery mode either. I can put it in download mode though, but my computer still has a problem recognizing it.
Click to expand...
Click to collapse
If you can get into dl mode then you should be able to return it to stock which should reset everything. Returning to stock has its own downside but at least you'll be up and running again.