Database Develop

Paragon RC5.0 issues

Just installed Paragon RC5.0 on my capitivate. Install went smooth, everything is pretty and the backups restored. Im only running into one issue. I cannot get the screen to turn to the side when holding it horizontally.
I was having this problem last night when i was having issues with my backups. I did something to where i could get it it to turn and thought all was well. I reinstalled the ROM because titanium backup over wrote a few programs that were on the ROM and was more careful about the next restore. No matter what i do i cannot get the screen to move to any other position now.
Tried reading through the 200 page super thread on the ROM, but was unsuccessful at finding any information.

Running same rom not having that issue.
Maybe try reinstalling rom then are if it works before youdo anything with titanium

try to do a master clear first.

Did the Master clear with odin following instructions: http://forum.xda-developers.com/showthread.php?t=731989
Rerooted, re installed paragon. Tilting works now, havent touched titanium backup yet. Lets see how restoring things affects it

Tilt was working. Used titanium backup to manually select a few things to restore, like contacts and a few other things. Then used batch to restore all missing programs, I made sure to go down the list and only select specific programs i wanted back. Rebooted my phone and now tilting doesnt work anymore.....

Was frustrated with Paragon so I master cleared again and installed Serendipity 5.3. Everything working fine and well, tilting worked. I click 2 apps on the phone(market and maps :/) and tilt hast worked after that. Is this a comon problem with ROMs?

So you are saying that your auto rotate after you opened maps and or the market?
No that is not normal

After installing the Rom i let it sit for 5 minutes, opened messaging and rotated it and it worked, opened a new message and went to the keyboard and it worked. I open up the camera, and then tried to put in my market info and the screen wouldnt rotate, along with everything else now. No backups or anything this time. 2nd ROM in a row to do this for no reason. I'm thinking about going back to stock lol

I do not use my auto rotate but I have not heard a problem like yours before. Sorry, I got nothing

Apparently Serendipity 5.3 and paragon has an icon on the pull down menu i mistook for the sync icon thats on the stock ROM( i think thats what it is, i always had it off and it never affected anything). An infuriating little feature when not understood.

Facepalm
So you are cursing at your phone and you had turned the feature off? Live and learn

Yea, when i finally figured it out i felt really dumb. Although, in the frustration caused by this stupid mistake I can now master clear, root, and flash my phone in my sleep haha

Problems with Paragon RC5 ROM
After i flashed the rom, my captivate went to the first boot image and got stuck. My phone has been like that for a couple of hours. is there a way i can flash back to the stock rom or fix this problem? I have tried to reboot into recovery but my phone wont get past the first boot image. PLZ HELP!!!! P.S. I forgot to master clear before flashing rom and I used rom manager to flash the rom. I was running darky's rom b4 trying to flash this one.

bindratn said:
After i flashed the rom, my captivate went to the first boot image and got stuck. My phone has been like that for a couple of hours. is there a way i can flash back to the stock rom or fix this problem? I have tried to reboot into recovery but my phone wont get past the first boot image. PLZ HELP!!!! P.S. I forgot to master clear before flashing rom and I used rom manager to flash the rom. I was running darky's rom b4 trying to flash this one.
Click to expand...
Click to collapse
Can you get into download mode?

how would I do that?

Turn phone off
Take out sim, ext sd, battery
Have usb hooked to pc but not phone
Put battery back in
Hold volume up and down while plugging in usb
Phone should go to a screen with an android with a shovel
If you can do this and have a windows pc I can get you back up and running pretty easy

ok i did that and it went into download mode

Do you have a windows pc?
Have you installed the usb drivers for this phone?
What is your build number of your phone, located under battery something like 1008?

yes i have a windows pc and the drivers and my build number is 0168 i guess

No that its not your build
You do have a captivate right?
Under battery anything from 1006-1012

USB/Charger reboot the phone, download mode lost, vibrant rom on i9000

OK guys I really badly need some help. My phone is in a non-workable state and I am starting to run out of options.
I did some mistakes but I will try to take out the details to list mostly the fact, hoping someone will take the time to give me directions.
- I have a galaxy s I9000 (switzerland/orange)
- I had upgraded to 2.2 via Kies.
- I got tired of the phone becoming increasingly slow. I found out about voodoo lag fix. I read 3000 forum posts, documentation and stuff, and when everything seemd easy enough, I installed voodoo via Odin.
- Here problems started. After installing voodoo, the phone booted, but the robot voice said "convert data partition. Not enough space on partition". Then again. And again. It was stuck in a boot loop. This problem doesn't seem to be documented anywhere i could find. The only instructions I could find on how to disable voodoo were to create some files on the disk, not very helpful when you can't boot the phone.
- I found a couple of threads with people who had the same message, and the advice their were given was to flash another rom.
- So I went to samfirmware.com and downloaded 2.2.1 for I9000 (JS8). I installed it through Odin. The phone booted, showed me the Galaxy S screen, then went black. Then it would vibrate every 20 seconds or so. Once, then 3 times in a row. I waited 30 minutes because in some places it said that may take long, but the situation didn't change. I rebooted, tried again after taking about the battery, wiped data, reset factory settings etc. The phone state wouldn't change, and I started to get a little desperate, because this was a stock rom, and if that didn't work...
- I read 3000 more threads, and phone a guy who had been in this situation, and got out of it by first installing "Eugene's JK2 froyo that never bricks" and then after wards reinstalling the stock rom.
- So I installed Eugene's rom. I knew it was trouble that it was a vibrant's rom, but I figured, I had read everywhere that as long as your phone supported download mode you could still always re-flash a new rom, so I decided give it a try.
- And the phone booted. Asked my pin, loaded stock android and all. I was happy at first, but then new trouble came. Now, whenever I plug in the USB, the phone's screen goes black after 4-5 seconds. When I unplug it, phone reboots. No charging battery appears when I plug the turned off phone on the charger.
- And worst of all, the buttons got mixed up. Vol up is vol down now. But more of a problem, 3 button recovery and 3 button download mode don't work anymore. I couldn't find a way to get them back. So I can't flash a new rom with Odin :-/.
- My latest was to install rom manager since I can access the market. I downloaded the tedgy rom. Installed the "clockwork recovery mode" from Rom Manager. It asked me if I had I9000 or vibrant, wasn't sure what it expected since I have now a vibrant rom on an I9000, but I put in I9000. Then I reboot telling rom manager to install Tedgy. I get a recovery mode screen which offers to reboot/reinstall packages/wipe data, then does a couple of operations, and finally gets stuck on :
can't open /cache/update.zip
(bad)
installation aborted
So there I go, with a vibrant rom on my I9000 (rooted, at least), a phone that can boot a half-functionnal android, but with a useless cable plug, an unchargeable battery, and a download mode I couldn't find... And waiting for my wife to get back with her phone so I can charge my battery again...
Any help or lead to help me get another rom installed on this phone again would be *greatly* appreciated. What other ways do I have to access download mode ? Or is there a way to get to it despite my buttons being messed up ? Maybe the rom manager issue can be fixed ?

OK well I got out of it somehow.
In case someone else had this same issue, here's how I got out of it :
1) Install ADB.
2) launch Odin
3) go to adb folder in command line and type "adb reboot download" but no enter just yet.
4) plug the usb cable on the phone.
5) type enter in the adb shell in the small window of opportunity you have before the screen goes blank. This reboots the download mode and allows new flashing via odin.

Any answer for this thread?
Did you fix the problem?
I'm stuck with the same case...

[Q] Help! bricked + corrupt system?

I've been looking all over this site but I can't find anything. I suppose that it's partly because I'm not sure about the problem myself.
A couple of months back (maybe more) I upgraded to the ICS infinitum rom (blue version) with midnight kernel. It was great - the phone worked fine. Well I'm exaggerating, it ****ed up every once in a while. Programs would automatically shut down and it would get really slow after a while. But all in all it wasn't bad, and it was stable enough for me most of the time....
Then, last Thursday everything seemed to go apart, every program on the phone was shutting down. So I thought I'll just restart and it will be fine. When I did, the phone did not come back on. the kernel would load and then it was stuck on the start-up animation in infinite loops.
Now, to be frank, this isn't the first time this has happened. So I didn't panic. Last time I just used the CMW recovery to re-install the kernel and the rom (I keep the files on the sd card). But this time, I wanted to try to avoid the factory wipe for as long as I could, and try finding a different option, knowing that if all else fails, I have something to revert back to.
Then I did the mistake of deleting the init.d file without re-installing anything. I wanted to, but accidentally clicked on the 'reboot now' option. And then all went to ****. The kernel didn't load. I went to recovery and it couldn't mount the sd card so I couldn't re-install it.
I tried flashing a new kernel using odin, and it did get me a bit better: my CWM recovery can read the sd. However, I still can't mount the system. Even worse, when I get to the infinitum zip roms and re-installing it brings up the status 7 error (which, after searching, seems to come up for different reasons for each person)
Despite installing a new kernel, when I reboot the phone now it doesn't load the kernel anymore, it just stays stuck on the welcome screen. I tried using the recovery to re-install a different kernel, it worked, but the phone still won't start - it now automatically skips to the recovery mode. I don't know if I should try flashing a rom through odin, and I'm too afraid to try anything at all now...
Can anyone help me? Is there any way to restore the init.d file or maybe that has nothing to do with my problem?

uvii said:
I've been looking all over this site but I can't find anything. I suppose that it's partly because I'm not sure about the problem myself.
A couple of months back (maybe more) I upgraded to the ICS infinitum rom (blue version) with midnight kernel. It was great - the phone worked fine. Well I'm exaggerating, it ****ed up every once in a while. Programs would automatically shut down and it would get really slow after a while. But all in all it wasn't bad, and it was stable enough for me most of the time....
Then, last Thursday everything seemed to go apart, every program on the phone was shutting down. So I thought I'll just restart and it will be fine. When I did, the phone did not come back on. the kernel would load and then it was stuck on the start-up animation in infinite loops.
Now, to be frank, this isn't the first time this has happened. So I didn't panic. Last time I just used the CMW recovery to re-install the kernel and the rom (I keep the files on the sd card). But this time, I wanted to try to avoid the factory wipe for as long as I could, and try finding a different option, knowing that if all else fails, I have something to revert back to.
Then I did the mistake of deleting the init.d file without re-installing anything. I wanted to, but accidentally clicked on the 'reboot now' option. And then all went to ****. The kernel didn't load. I went to recovery and it couldn't mount the sd card so I couldn't re-install it.
I tried flashing a new kernel using odin, and it did get me a bit better: my CWM recovery can read the sd. However, I still can't mount the system. Even worse, when I get to the infinitum zip roms and re-installing it brings up the status 7 error (which, after searching, seems to come up for different reasons for each person)
Despite installing a new kernel, when I reboot the phone now it doesn't load the kernel anymore, it just stays stuck on the welcome screen. I tried using the recovery to re-install a different kernel, it worked, but the phone still won't start - it now automatically skips to the recovery mode. I don't know if I should try flashing a rom through odin, and I'm too afraid to try anything at all now...
Can anyone help me? Is there any way to restore the init.d file or maybe that has nothing to do with my problem?
Click to expand...
Click to collapse
I suggest flash 3-file GB rom via odin with ticked re-partirion and phone bootloaderupdate.

First of all init.d has nothing to do with the boot of kernel and ROM itself. It's just like autostart in Windows, so if it's missing it shouldn't cause problems.
My solution is to flash a complete stock Gingerbread ROM using Odin. You can get them at sammobile.com. Then afterwards flash a custom kernel and then whatever you like.
If you need help,feel free to ask me
Sent from my Gameboy Color

Yes! Thank you! That worked!!

It happened again! just 10 days later.
Is the Infinidtum rom ****ed up in any way?
it's stuck on the loading part of the rom

Captivate gets stuck with black screen after booting. No response to anything

Phone: Samsung Captivate I-896, with AT&T stock Android 2.2 flashed to it. Rooted and unlocked.
Action: Deleted some *.odex files from Root/Data/App, following a guide to get around the "out of space" message while trying to install software. Cleared Delviks cache directory.
Problem: First restart after above actions(which didn't resolve the out of space message issue), phone shows start-up animations, gets stuck with black screen. Left like this overnight, nothing happens. Vibrates every 50 seconds or so. Respons to hardware Vol+ press with the home/back/menu backlight. Otherwise, no response to anything, black screen(backlight on). Does not receive phone calls. I do not know for sure if the action listed above is the one that caused this situation, but I assume so since it was the last action taken before the issue appeared.
Solutions attempted: Tried every possible permutation/combination of buttons/usb cable/etc/ restarts etc. listed here: http://forum.xda-developers.com/showthread.php?t=858765&page=1, except Jig. The phone would not go into recovery or DL mode.
Question.
Am I correct in assuming that forcing the phone into recovery mode and reflashing a new system(or reflashing the old one) is the only way to get the phone to work again?
There is no way to "soft-reset" the phone, with all settings reverted back to stock, if it does not boot up completely?

Titerepayaso said:
Phone: Samsung Captivate I-896, with AT&T stock Android 2.2 flashed to it. Rooted and unlocked.
Action: Deleted some *.odex files from Root/Data/App, following a guide to get around the "out of space" message while trying to install software. Cleared Delviks cache directory.
Problem: First restart after above actions(which didn't resolve the out of space message issue), phone shows start-up animations, gets stuck with black screen. Left like this overnight, nothing happens. Vibrates every 50 seconds or so. Respons to hardware Vol+ press with the home/back/menu backlight. Otherwise, no response to anything, black screen(backlight on). Does not receive phone calls. I do not know for sure if the action listed above is the one that caused this situation, but I assume so since it was the last action taken before the issue appeared.
Solutions attempted: Tried every possible permutation/combination of buttons/usb cable/etc/ restarts etc. listed here: http://forum.xda-developers.com/showthread.php?t=858765&page=1, except Jig. The phone would not go into recovery or DL mode.
Question.
Am I correct in assuming that forcing the phone into recovery mode and reflashing a new system(or reflashing the old one) is the only way to get the phone to work again?
There is no way to "soft-reset" the phone, with all settings reverted back to stock, if it does not boot up completely?
Click to expand...
Click to collapse
Sounds pretty accurate. You'll have to get a jig to get in download mode, flash stock Odin KK4 to fix w/e happened during your testing.

Thanks Bwolf. I just tried ADB console on a different computer and it connects to the device just fine in spite of black screen. I guess I had one thing right, USB DEBUGGING enabled before this whole deal.
Question: is there any way I can restore the phone using the console without wiping everything?

Titerepayaso said:
Thanks Bwolf. I just tried ADB console on a different computer and it connects to the device just fine in spite of black screen. I guess I had one thing right, USB DEBUGGING enabled before this whole deal.
Question: is there any way I can restore the phone using the console without wiping everything?
Click to expand...
Click to collapse
Make a backup with ADB.
Once that's done, push download mode with it and get Odin KK4 (without bootloaders). You'll have to start from there to fix w/e went wrong.
You don't have to wipe your sd doing so but you will lose your apps and such. If you backed up your phone with your Play Store account, it will re-download your apps as you're done booting up.
To get back up where you were, grab Corn Kernel, flash it with Odin 1.87 and then follow the full instructions of the ROM you wanna use.

[Q] Boot lopp w/ AP, Plz help.

Droid 4 running Stock Jb 4.1.2, Safestrap 3.11, Liquid smooth 2.9, CM (last stable)
Everything working fine for a number of months, installed Liquid smooth via -> delete romslot 3, create romslot 3, install Liquid 2.8.
It ran for a number of days no problems. Restarted fine, all features worked great, even the annoying random restart from 2.4 went away.
6 - 10 days in, im surfin' the news sites at work, put it down, screen goes black, i pick it up. Hit the power button cause i realize its off and it just boot loops... so bad i had to vol-/+ pwr, go to flash mode and THEN turn it off b/c it just kept trying to restart, hang on logo.
I got home and decided to AP flash the latest:
9.8.2O-72_VZW-18-2
Blur_Version.98.72.182.XT894.Verizon.en.US for the maserati.
Boot looped a few times, i was able to get it to go into recovery mode, after that it loaded up the stock JB system. First boot it crashed and restarted, second boot it loaded but only the keyboard worked, not the touch screen. Went to the in OS option of factory reset mode + delete storage.
Rebooted, worked. Checked it a few boots, everything is fine. I use Druid 4 Utility Xt894 JB version and apply the root. Works great. Install safestrap, Create new partition, install liquid smooth 2.9. Works for an afternoon... at work today the touch screen stops responding, i restart it a few times. I try to enter recovery mode. Now im in boot loop again...
I've tried re flashing it again, a few times. I tried even going down to the previous release of JB for the phone. STILL 4.1.2!!!! But nothing.... it just boot loops... what did i do wrong? It was running great. No tweaks or anything done to it prior to it having its melt down.
Help please.. ive provided as much information as possible and though i only joined XDA now to post for help, i have read it for a long time as my main source for my phone and have donated to both CM and Liquidsmooth teams previously..
help!!!

I can't see where you are doing anything wrong. You have obviously done your research and have a good idea of what you are doing. I see, after you fastbooted, you went back to Liquid. I think I would try running CM10.1 or even stock for a few days and see if you have the issue there as well. If you do than it sounds to me like it might be a hardware issue. If not, maybe try re-downloading Liquid. Perhaps your zip got corrupted somehow.

I would love too. In fact i would be willing to run it on the stock crappy 4.1.2 if i could get it out of boot loop this time...
It just keeps boot looping on the logo. AP Fashboot flash and BP flash work but recovery and normal boot/reboot mode just goes into M logo boot loop.
I've re downloaded the 4.1.2 jb SBFs from 2 different sources to ensure its not a corrupt file, tried 18_1 and 18_2 software versions...
Is there a way to use the abd shell to get into the filesystem and check whats going on? Is the SBF the last call? or is there another route to see whats going on or just flash EVERYTHING? Like completely back to stock?
I can find my way around a PC file system but im not familiar with linux. Please help me understand, Is it like having CMOS and BIOS settings or equivalent to damaged CMOS firmware? What am i not replacing/reverting by SBF and HOW can i replace/revert BEYOND the basic sbf...
If ya point me in a direction or to someone who can help me out i can do all the foot work just point me in the right direction?

Is this applicable? I found a site talking about using CWM in a ADB shell file push to possibly get access to more features?
The article also goes into reading the busybox / ADB command screen? (sorry for not proper jargin) and see what its doing during the boot loop before it restarts?
Id add the link but i need more posts....

Update: Flashed 18_2 again with a "factory cable" i made, let it boot loop a series of times before it started up into the stock system again.
At first, again the touch screen wouldn't work, random lockups and restarts, etc. Since i just got it into the main system again and i had to leave for the weekend for a trip(no wifi or network), i couldn't mess with it all weekend but i left it on the whole time and kept checking its functionality... gradually its come back to full function. Touch screen works and is accurate, no more lockups, no more restarting, even stopped boot looping when i restart and enter recovery..
Im not sure and i couldn't find any forum converstations or write ups to support to idea but i think after a major crash and you flash new or reflash your SBF, it seems the phone needs time to recalibrate and index? Not sure, but just an FYI. Gonna try loading SS and liquid again.