Hi !
Here's an application to install and uninstall TWRP 2.4.3.0 recovery on locked bootloaders Xperia Z. It's stable on my Xperia Z, but i highly suspect some partition (system) problems with Xperia ZL phones.
This application will install TWRP recovery ramdisk to system as "recovery.tar", but you can provide your own recovery (ramdisk) by placing it to "/sdcard/XZRecovery.tar". This way this application could be compatible with other recovery or devices.
TWRP recovery ported to Xperia Z by krabappel2548 !
If you don't know which file to use, download XZRecovery-1.0.apk, install it and run it.
The recovery will get lost each time you flash a rom or wipe system partition.
XZRecovery.apk
Install, uninstall and reboot to recovery from your Android device
twrp-2.4.3.0-xz-locked.zip
Install recovery from windows (ADB)
twrp-2.4.3.0-xz-locked-recovery.zip
Install recovery from recovery
Cpasjuste said:
Hi !
Here's twrp recovery for locked bootloaders. It's working in the same way as cwm for locked bootloaders if you tried it.
See krabappel2548 thread for installation and such: http://forum.xda-developers.com/showthread.php?t=2187363
Thanks for reading
Click to expand...
Click to collapse
Great work, hope it works fine, i will give it a try
Re: [RECOVERY] TWRP 2.4.3.0 for lockled bootloaders
zakwak said:
Great work, hope it works fine, i will give it a try
Click to expand...
Click to collapse
At least it work fine here
Sent from my C6603 using xda app-developers app
Here, too, if you make a full recovery before flashing erasing lost?
Ok , boot into recovery with no problems !!! Thank's !
Great!!!
Does backup & recovery works? I hope it's not as slow as CWM for locked bl. WIll play around with it later.
Re: [RECOVERY] TWRP 2.4.3.0 for lockled bootloaders
barbik said:
Here, too, if you make a full recovery before flashing erasing lost?
Click to expand...
Click to collapse
Yes, but I may do something to prevent that if I find the time.
Sent from my Nexus 7 using xda app-developers app
Re: [RECOVERY] TWRP 2.4.3.0 for lockled bootloaders
zanndoth said:
Great!!!
Does backup & recovery works? I hope it's not as slow as CWM for locked bl. WIll play around with it later.
Click to expand...
Click to collapse
Didn't try a backup but zip flash, mount and utility are. let me know
Sent from my Nexus 7 using xda app-developers app
Backup worked: 558 seconds.
Hi,
i did update the first post with a recovery zip that can be installed from recovery. So you should be able to flash any (stock based) rom from recovery, including wiping system, then install this file to get recovery back (well before exiting recovery of course or you'll loose it).
Re: [RECOVERY] TWRP 2.4.3.0 for lockled bootloaders
Cpasjuste said:
Hi,
i did update the first post with a recovery zip that can be installed from recovery. So you should be able to flash any (stock based) rom from recovery, including wiping system, then install this file to get recovery back (well before exiting recovery of course or you'll loose it).
Click to expand...
Click to collapse
Good work, I suppose you used my TWRP recovery?
Sent from my MT15i using xda app-developers app
krabappel2548 said:
Good work, I suppose you used my TWRP recovery?
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
I used stock doomlord recovery fs Edit: Hum i'm saying crap, it's for cwm, so yes it use your rootfs! By the way, did you compile it yourslef? if so i could directly add chargemon flashing in the recovery sources each time a wipe is done on system. Else i will not bother downloading sources and configuring all that
In fact, like i first thought, we should be able to use any initramfs.
So and for your phone, any news ?!
simply, working perfect... thanks, i prefer TWRP to CWM
Untill now, i havent find any king of problems
Thanks a lot
Cpasjuste said:
I used stock doomlord recovery fs Edit: Hum i'm saying crap, it's for cwm, so yes it use your rootfs! By the way, did you compile it yourslef? if so i could directly add chargemon flashing in the recovery sources each time a wipe is done on system. Else i will not bother downloading sources and configuring all that
In fact, like i first thought, we should be able to use any initramfs.
So and for your phone, any news ?!
Click to expand...
Click to collapse
I compiled TWRP completely myself yes my patched sources for XZ are on github as wel as the modified device configuration files.
I need ti sent my phone back to the online store on monday, then I'll normally get a replacement for free
krabappel2548 said:
I need ti sent my phone back to the online store on monday, then I'll normally get a replacement for free
Click to expand...
Click to collapse
Wow, good News, im happy for you
Sorry krabappel2548
I not clear to me the story of warranty ..
if you have unlocked the bootloader you sent to Sony your IMEI, you should not have lost the Warranty in this way? I do not understand this
Do you lose the warranty or not sending them the IMEI?
Can you help me understand?
Thanks
i might of missed but was the keyboard toggle (letters/numbers) fixed because i still cant toggle
reboots when using root explorer
after installing cwm, phone reboots everytime when i access root explorer or any program that can edit/explore system files. Any fix?
Re: [RECOVERY] TWRP 2.4.3.0 for lockled bootloaders
Do you have an xperia ZL ?
Sent from my Nexus 7 using xda app-developers app
Guys, Please, im new of Sony device, i come from so many Samsung device, I'd like to Enjoy my device, root and flash cooked rom, but i need before to know this:
I not clear to me the story of warranty ..
if i have unlocked the bootloader i sent to Sony my IMEI, i should not have lost the Warranty in this way? I do not understand this
I lose forever the warranty or not sending them the IMEI?
Can someone help me understand?
Please, Thanks
finoqq84 said:
after installing cwm, phone reboots everytime when i access root explorer or any program that can edit/explore system files. Any fix?
Click to expand...
Click to collapse
same here
Related
Starting from Varun kernel, ThynderZap 4.1, thanks for Varun , wich recovery is the best for our phones?
And, WHY?
PS:I have read some topics from Nexus, but we must have our thread for many newbie users.
R_a_z_v_a_n said:
Starting from Varun kernel, ThynderZap 4.1, thanks for Varun , wich recovery is the best for our phones?
And, WHY?
PS:I'm read some topics from Nexsus, but we must have our the\read for many newbie users.
Click to expand...
Click to collapse
In our case, TWRP have support for internal and external SD. Touch support. I think it backed up faster, CWM around 10 min, TWRP 6-7.
Is the CWM permanent?
Sent from my GT-I9070 using xda app-developers app
GaYoung28 said:
Is the CWM permanent?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Both are. Just it comes embended in kernel. No other way to use permanent, because they are on the same partition (kernel and recovery) on our phone.
If i flash my original FW, will the CWM is missing?
Sent from my GT-I9070 using xda app-developers app
Twrp is best
NOTHING TO SEE HERE
GaYoung28 said:
If i flash my original FW, will the CWM is missing?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Yes, you will have stock kernel then, and all stock in its partition includin recovery.
i dont know if twrp has the same possibilities to flash zip files. i personally prefer cwm, who cares about 3 min time to create a backup and about touch support, its a recovery and not a launcher
m4kl4 said:
i dont know if twrp has the same possibilities to flash zip files. i personally prefer cwm, who cares about 3 min time to create a backup and about touch support, its a recovery and not a launcher
Click to expand...
Click to collapse
Yes TWRP can flash zip, even use internal(varun modifications) and external storage. Both arey quite good, but I like that touch control more
m4kl4 said:
i dont know if twrp has the same possibilities to flash zip files. i personally prefer cwm, who cares about 3 min time to create a backup and about touch support, its a recovery and not a launcher
Click to expand...
Click to collapse
May be future Devs can make CWM with Touch support, Galaxy Mini have CWM touch recovery why not us.....
i prefer to use TWRP
since tz 4.1 support TWRP, i immediately download it
So let me get this straight! If you are on stock kernel, you cant have permanent recovery. U need to change kernal for getting permanent recovery enabled. Am I right ?
Sadvance said:
So let me get this straight! If you are on stock kernel, you cant have permanent recovery. U need to change kernal for getting permanent recovery enabled. Am I right ?
Click to expand...
Click to collapse
Yes.
On some phones there is possibility to install custom recovery separate from kernel, but on out phone recovery and kernel are on the same partition.
[ info ]
--------------------------[ UPDATE ]---------------------------------
This is now DEPRECATED as we can read reboot code from kernel cmdline during bootup, and this has been integrated in most recoveries.
--------------------------[ UPDATE ]---------------------------------
As most of you would know that the reboot-into-recovery is broken in our Xperia devices as we dont have a dedicated recovery partition... this is especially annoying as we cant directly use the Goo/ROM Manager functions without manually pressing the VOLUME keys at bootup..
well now I have developed a fix in the form of a reboot binary!!! this will now add compatibility with Goo/ROM Manager's Reboot into Recovery!!
just download the zip linked below and flash via any recovery...
It will work on both locked and unlocked bootloaders and on any kernel or ROM (stock or custom)...
[ WARNING ]
DO NOT TAMPER WITH THIS FILE AND DO NOT INTEGRATE THIS YOUR ROMS/KERNELS/APPS/MODS!
[ requirements ]
working recovery
any android OS
[ donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
[ downloads ]
KINDLY DO NOT MIRROR MY FILES
Reboot Wrapper v1.0 (MIRROR)
MD5HASH: 06c41123ed56e9db0ceeb01789c3e08a
incase of any issues feel free to post in this thread!
regards,
DooMLoRD
working good Doom, thanks
Nice, will try this fix!
Sent from my C6603 using xda premium
---------- Post added at 04:27 AM ---------- Previous post was at 03:30 AM ----------
RascarC said:
Nice, will try this fix!
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Works like a charm, thanks a million Doom!
Sent from my C6603 using xda premium
I have a question to ask, and i am asking this with no knowledge what so ever.
but, would it be possible to rewrite the partition table so that we get a recovery partition?
spazzy1912 said:
I have a question to ask, and i am asking this with no knowledge what so ever.
but, would it be possible to rewrite the partition table so that we get a recovery partition?
Click to expand...
Click to collapse
May be...
Sent from my LT30p using xda app-developers app
spazzy1912 said:
I have a question to ask, and i am asking this with no knowledge what so ever.
but, would it be possible to rewrite the partition table so that we get a recovery partition?
Click to expand...
Click to collapse
DooMLoRD said:
May be...
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
It sure is possible to shrink an existing partition and add a new one, but that should never be done unless absolutely required, which isn't the case for us.
We do have extra partitions, such as FOTAKenrel, which are already used for recovery (CM supports this too, if you flash a compatible TWRP image to the FOTAKernel partition, that will be loaded instead of the recovery present in the boot partition).
It still just loads the ramdisk from the image present on the FOTAKernel partition, what would have been better is the bootloader directly loading another kernel (from another partition), if the reboot reason is recovery or a key is pressed while booting.
How it be on DoomKernel? It may reboot into CWM or TWRP? O_O
I don't know if it works with Goo manger to boot into TWRP O_O
Edit:Now I know that Rom manger is support TWRP now,so I don't know what recovery will Rom manger use because Doomkernel has both CWM and TWRP
s940068 said:
I don't know if it works with Goo manger to boot into TWRP O_O
Edit:Now I know that Rom manger is support TWRP now,so I don't know what recovery will Rom manger use because Doomkernel has both CWM and TWRP
Click to expand...
Click to collapse
I believe it will use the default recovery, which is CWM in DoomKernel
Tried the downloaded last night and this morning - still can't access it.
EDIT: Not sure why I can't access the download. Won't work. Tried with a http proxy and worked instantly... hmm?
Michealtbh said:
I believe it will use the default recovery, which is CWM in DoomKernel
Click to expand...
Click to collapse
Have you tested it?
No, I run Cyanogenmod so can't use DoomKernel
dron39 said:
How it be on DoomKernel? It may reboot into CWM or TWRP? O_O
Click to expand...
Click to collapse
For now default is CWM on my kernel... I will separately provide access to selecting default recovery to boot into...
s940068 said:
I don't know if it works with Goo manger to boot into TWRP O_O
Edit:Now I know that Rom manger is support TWRP now,so I don't know what recovery will Rom manger use because Doomkernel has both CWM and TWRP
Click to expand...
Click to collapse
again CWM is the default one..
Michealtbh said:
I believe it will use the default recovery, which is CWM in DoomKernel
Click to expand...
Click to collapse
yes...
xfile087 said:
Tried the downloaded last night and this morning - still can't access it
Click to expand...
Click to collapse
hmmm please wait I will post mirror...
Michealtbh said:
No, I run Cyanogenmod so can't use DoomKernel
Click to expand...
Click to collapse
U can use this even on CM...
Sent from my LT30p using xda app-developers app
thx, work with rom manager like a charm. But other tools like quickboot use an other way to boot? So they won't work.
Do you have to reflash with ROM updates etc?
thunder141 said:
thx, work with rom manager like a charm. But other tools like quickboot use an other way to boot? So they won't work.
Click to expand...
Click to collapse
sadly those apps use different way to call reboot...
anyways what was is important is that ROM Manager is now properly working...
23Six said:
Do you have to reflash with ROM updates etc?
Click to expand...
Click to collapse
it will have to be reflashed if /system partition is changed... so if u change ROM then yes it will have to be reflashed...
Yes, that is right, i use rom manager now to Start Backup, etc. Thanks again for your work
Cannot download - times out every time.
Any chance of a mirror ?
haynesteve said:
Cannot download - times out every time.
Any chance of a mirror ?
Click to expand...
Click to collapse
Dev host mirror added in OP
Thank you
-=[XZDualRecovery]=-
PhilZ Touch & CWM & TWRP
*** For Locked and Unlocked BOOTLOADERS! ***
Welcome to the Xperia Tablet Z Questions & Answers thread!
I proudly present you the first and only DUAL RECOVERY for locked boot loaders on our lovely Xperia phones!
If you have an unlocked bootloader and chose to keep the STOCK Sony kernel, you can also use this MOD.
Currently supported XPERIA models:
These are also links to the device specific Q&A threads.
Xperia Z: SO-02E, C6602, C6603, C6606, C6616
Xperia ZL: C6502, C6503, C6506
Xperia Tablet Z: SO-03E, SGP311, SGP312, SGP321, SGP351
Xperia Z Ultra: C6802, C6806, C6833, C6843
Xperia Z1: C6902, C6903, C6906, C6943, C6916
Xperia Z1 Compact: D5502, D5503, D5506
Xperia Z2: D6502, D6503, D6506, D6543, D6563
Xperia Tablet Z2: SGP511, SGP512, SGP521, SGP551, SGP561
Xperia ZR: C5602, C5603, C5606
Xperia T, TX, TL and V: LT30p, LT29, LT30at, LT25i
Xperia S: LT26i
Xperia SP: C5302, C5303
Xperia T2 Ultra: D5303, D5322
Xperia Z3: D6603, D6633, D6643, D6653, D6616
Xperia Z3 Compact: D5803, D5833
Xperia Tablet Z3 Compact: SGP621, SGP641, SGP651
To follow development, be sure to check the DevDB thread!
INSTALLER: How to install using the installer:
Make sure you have USB debugging turned ON.
download TabZ-lockeddualrecovery[VERSION]-RELEASE.installer.zip from http://nut.xperia-files.com
Windows:
unpack at C: or somewhere you will remember!
navigate to the resulting directory and look for install.bat, double click it to run;
Linux:
unpack in your home folder with 'unzip TabZ-lockeddualrecovery[VERSION]-RELEASE.installer.zip'
navigate to the resulting directory and 'chmod +x install.sh', then execute it, follow instructions.
Your phone WILL reboot when installation has completed and it will go into the default recovery for the first boot.
Reboot to system from recovery to allow the installer to clean up after installation (it is safe to skip this step).
Enjoy DUAL RECOVERY!
How to install or update using a previously installed (XZDualRecovery) recovery:
Create a backup of /system/bin/chargemon and keep it somewhere safe, then just flash TabZ-lockeddualrecovery[VERSION]-RELEASE.flashable.zip from http://nut.xperia-files.com using CWM or TWRP.
How to remove:
Delete the following files:
/system/bin/recovery.twrp.cpio.lzma (or .tar)
/system/bin/recovery.cwm.cpio.lzma (or .tar)
/system/bin/recovery.philz.cpio.lzma
/system/bin/charger
/system/bin/dualrecovery.sh
/system/bin/mr
Rename /system/bin/mr.stock to /system/bin/mr to restore stock functionality, then inside /system/bin/ rename chargemon.stock to chargemon check its permissions (should be 755 or otherwise visible as -rwxr-x-r-x). Done!
When installing custom ROMs:
Be sure to flash TabZ-lockeddualrecovery[VERSION]-RELEASE.flashable.zip from http://nut.xperia-files.com after installing the ROM and before you reboot, this way you will not lose recovery!
How to use:
At boot, once you feel the phone vibrate and while you see the green led burn:
- press VOL-UP for PhilZ Touch;
- press VOL-DOWN for TWRP.
To enter Vanilla CWM, you will need to use the (free) NDRUtils app from the Play store
2.x Features:
When you have a SDCard1 and the XZDualRecovery is able to use it, you can put a file called 'donotrun' inside the XZDualRecovery log folder to make XZDualRecovery escape following boot attempts.
If you find yourself in a bootloop situation, take out your SDCard1 and put that file in the directory if it exists using a PC. Reboot your phone with Power+Vol-UP and you will be able to boot your phone as if there was no recovery there!
XZDualRecovery will signal the escape or any reason why it would not be able to continue normal operation with a 2 second burn of your LED in the color RED. A reason would be a broken /cache and no SDCard1 or a busybox in /system/xbin which does not support the lzcat command. If you see that, check /tmp/XZDualRecovery for a logfile there, it will tell you why.
XZDualRecovery will try to use your SDCard1 for logging and functionality, if it has been formatted with ext2/4, FAT16/32 or exFAT. NTFS is currently unsupported.
XZDualRecovery now prevents the RIC service from starting up, this means when running XZDualRecovery the Remount-Reboot fix is no longer needed.
Defaults:
The default on first boot with the boot-to-recovery flag set by any recovery is PhilZ Touch Recovery.
Init.d support is disabled by default, set dr.enable.initd to true to enable it.
Insecure ramdisk support is disabled by default, set dr.insecure.ramdisk to true to enable it, set to 'power' to boot it by pressing the power button at boot.
Error reporting:
Please, when reporting errors or problems:
Put up a notice in this thread providing the package name you used to install or update;
Include ROM name and/or FW version numbers;
Include what SU apk you are using (SuperUser or SuperSU)
Send me the contents of all the log files from right after a failed boot attempt or a link to an archive containing these logs by PM (that's including the .old rotation logs!). If you have no website or online location to store the logs, PM me for an email address to send them to.
Logs can be found inside:
/cache/recovery
/tmp/XZDualRecovery
/storage/sdcard1/XZDualRecovery
/cache/XZDualRecovery (if the previous exists, this one will not!)
NOTE: I need them ALL!
I really need them to troubleshoot what failed and what worked OK. Thank you!
-------
Special Thanks:
@DooMLoRD for all his excellent work on our much loved Sony phones!
The Team Win developers for TWRP
The ClockWorkMod developers for CWM
@alexocean for his awesome job testing almost all FW releases and the discovery of SuperSU causing problems for the installation of this recovery!
@RoberM for testing
@surdu_petru for testing and handy pointers
@Androxyde for allowing to use his linux and mac adb binaries.
@lancebukkake for finding the TWRP 'fix' to use exFAT formatted sdcards!
@delewer for the final fix for TWRP and its use of exFAT formatted sdcards
@DevShaft for some code help on the windows installer (the menu!)
@Androxyde again, but now for his bash code/script suggestions... oh boy this guy is a genius! :highfive:
@Tamirwig and @shoey63 for their excellent job at testing early BETA's (Xperia Z)
@gregbradley for his extensive testing on the Xperia Z1
Well, enjoy! :fingers-crossed:
The origins of this XZDualRecovery package are in the packages done by:
Krabappel2548, Cpasjuste and DooMLoRD
Thank you for your excellent work guys! :victory:
[Locked Bootloader]CWM recovery 6.0.2.8 for locked bootloaders v4[25-03] by Krabappel2548
[APP/RECOVERY] TWRP 2.4.3.0 for lockled bootloaders installer by Cpasjuste
[KERNEL][Z] DooMKernel {JB}(v06)[20130414] by DooMLoRD
Your thanks (and donations) should (also) go out to them, they deserve it! :highfive:
Is there also support for the SGP311 and SGP312?
Hondaracer said:
Is there also support for the SGP311 and SGP312?
Click to expand...
Click to collapse
Probably yes, but i can not say yes for 100%. Just install 2.5 BETA and see, it will most probably work.
@[NUT] I wish I could, but I made a pre-order for the SGP312 (black non-LTE 32GB) on May 15 but there's still no stock of this tablet in the Netherlands...
Hondaracer said:
@[NUT] I wish I could, but I made a pre-order for the SGP312 (black non-LTE 32GB) on May 15 but there's still no stock of this tablet in the Netherlands...
Click to expand...
Click to collapse
Heh... well, someone else will probably test it for you
the tablet must be rooted before i use that tool?
gerzii said:
the tablet must be rooted before i use that tool?
Click to expand...
Click to collapse
Yes sir, it must be rooted. It needs root to be installed.
Sent from my C6603 using xda app-developers app
[NUT] said:
Yes sir, it must be rooted. It needs root to be installed.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
ok
and with this tool i can install a custrom room, although my bootloader is locked?
gerzii said:
ok
and with this tool i can install a custrom room, although my bootloader is locked?
Click to expand...
Click to collapse
As long as the ROM chef says it needs to be flashed using CWM or TWRP, yes
That would be any STOCK based ROM for your model.
Sent from my C6603 using xda app-developers app
[NUT] said:
As long as the ROM chef says it needs to be flashed using CWM or TWRP, yes
That would be any STOCK based ROM for your model.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Hei and thanx alot
So with this cwm installed on my 311 rooted z, i'll be able to flash aokp or cm10.1 roms from cwm? And Even be able to have dualboot?
Woow this is excatly what i miss!!
But but I Will be First to flash on 311 and not sure on what happens IF it ends in bootloop or not booting at all?
And how do i(we) revert things Again?
Plz advise
[NUT] said:
As long as the ROM chef says it needs to be flashed using CWM or TWRP, yes
That would be any STOCK based ROM for your model.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
i will ask CM and will give u the answer
spoonymoon said:
Hei and thanx alot
So with this cwm installed on my 311 rooted z, i'll be able to flash aokp or cm10.1 roms from cwm? And Even be able to have dualboot?
Woow this is excatly what i miss!!
But but I Will be First to flash on 311 and not sure on what happens IF it ends in bootloop or not booting at all?
And how do i(we) revert things Again?
Plz advise
Click to expand...
Click to collapse
You can only flash ROM's that do NOT require a custom kernel on a locked bootloader.
The XZDualRecovery does NOT offer dualboot, only dual recovery, it means you can use either TWRP or CWM to flash, backup and restore your tablet.
If you ever try to flash a new ROM, you create a backup using either recovery first. In case of a bootloop you can then restore your tablet using either a FTF combined with FLASHTOOL or use SUS to restore it to working order. Then you can root it again and install XZDualRecovery to be able to restore your backup.
Just as a friendly pointer: it's wise to have an external sdcard when flashing ROM's as in case of emergency, the SUS (for sure) or FLASHTOOL (if your not carefull) restores both wipe your internal storage, and if you stored your backups there, they will be gone.
Be sure to keep a backup of your internal storage contents on your pc/Mac... Just as a precaution.
All the above is to be read with the following in mind: BETTER SAFE THEN SORRY!
Sent from my C6603 using xda app-developers app
Confirmed. It worked on my SGP311. I did a CWM backup without a glitch. Still have to try to restore.
Enviado desde mi SGP311 usando Tapatalk 2
If I get a bootloop, how come I can't just go into cwm recovery and restore a nandroid backup? Why having to do ftf and flashtool, reroot, reinstall recovery, then restore backup?
Sent from my SGP312 using Tapatalk 2
nyknight77 said:
If I get a bootloop, how come I can't just go into cwm recovery and restore a nandroid backup? Why having to do ftf and flashtool, reroot, reinstall recovery, then restore backup?
Sent from my SGP312 using Tapatalk 2
Click to expand...
Click to collapse
You might be able to boot to recovery in case of a bootloop, but if that's not possible that might be your only solution. It all depends on where during boot the loop occurs.
Sent from my C6603 using xda app-developers app
[NUT] said:
As long as the ROM chef says it needs to be flashed using CWM or TWRP, yes
That would be any STOCK based ROM for your model.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
the resolution of TWRP is not correct, can be used at Xperia tablet z
takumibox said:
the resolution of TWRP is not correct, can be used at Xperia tablet z
Click to expand...
Click to collapse
Heh, it doesn't orientate itself in the right way... I'll see what I can do about that...
Sent from my C6603 using xda app-developers app
This doesn't and will never work for installing CM, AOSP and similar ROMS right? Maybe you should include a big disclaimer in your first post about this.
Still nice work!
Itcouldbeyou said:
This doesn't and will never work for installing CM, AOSP and similar ROMS right? Maybe you should include a big disclaimer in your first post about this.
Still nice work!
Click to expand...
Click to collapse
Never is a big word
If you unlock your bootloader using FLASHTOOL after creating a backup of the TA partition it might just be helpful enough to flash whatever you want TWRP and CWM are able to flash a kernel, just not a custom one on a locked bootloader.
Doing so will result in a soft-bricked device with the risk of having to wipe everything on your device.
But no, a CM, AOSP or AOKP ROM implies a custom kernel, that will never work on a locked bootloader, but that should already be communicated by the respective ROM builders, but from my perspective at least: that is something outside the scope of this thread...
This is just the compilation of the work of several Seniors Members and Contributors Recognized in this forum.
I simply change some lines so that we have the files that I present.
Only Install via Custom Recovery (CWMR or TWRP) for those who want to try one or the other recovery
Thanks, Credits and Cheers to Them.
@turl1 CWMR
@rickwyatt CWMR version Black
@Hazou TWRP and CWMR 6.0.3.6
@HSD-Pilot Script Boot.img (This one I adapted)
Downloads
Recovery CWMR Black.zip
Recovery CWMR Gray.zip
Recovery TWRP 2.6.0.0.zip Note: Work slow but very fine
Recovery TWRP 2.6.1.1.zip New Note: The Recovery for Installation by Omar Rom No work for me, for you, maybe
Recovery CWMR 6.0.3.6.zip New
Greetings and Luck and sorry for my bad English
Note: I am not responsible for what happens to your phone by using these files, I've tried and I have worked on my two phones Razr I
To see the changes, at the end of any recovery flash, search and select, in the menu of your recovery -> reboot in recovery
This restart the phone in recovery you just flash
jacbarahona72 said:
This is just the compilation of the work of several Seniors Members and Contributors Recognized in this forum.
I simply change some lines so that we have the files that I present.
Only Install via Custom Recovery (CWMR or TWRP) for those who want to try one or the other recovery
Thanks, Credits and Cheers to Them.
@turl1 CWMR
@rickwyatt CWMR version Black
@Hazou TWRP
@HSD-Pilot Script Boot.img (This one I adapted)
Downloads
Recovery CWMR Black.zip
Recovery CWMR Gray.zip
Recovery TWRP 2.6.zip
Greetings and Luck and sorry for my bad English
Note: I am not responsible for what happens to your phone by using these files, I've tried and I have worked on my two phones Razr I
Click to expand...
Click to collapse
if i flash twrp it will automatically remove CWMR?
That's
paulle said:
if i flash twrp it will automatically remove CWMR?
Click to expand...
Click to collapse
That's octopus ..... I've tried installing the one above the other, without problem
Greetings and good luck and sorry for my bad English
jacbarahona72 said:
That's octopus ..... I've tried installing the one above the other, without problem
Greetings and good luck and sorry for my bad English
Click to expand...
Click to collapse
tried it and worked fine! muchas gracias
Thanks ever so much for the creation and sharing of these recovery zips.
Most appreciated
Does this fixes the lag issue (on both CWM and TWRP)?
No, won't fix the lag in the recoveries.
Sent from my GT-P5110 using XDA Premium HD app
Will the lag ever be fixed ?
Sent from my XT890 using xda premium
Maybe, maybe not. We know that a kernelthread (kworker) is using constantly around 40% of the cpu. But we can't find the cause of that or just stop it.
Sent from my GT-P5110 using XDA Premium HD app
Hazou said:
Maybe, maybe not. We know that a kernelthread (kworker) is using constantly around 40% of the cpu. But we can't find the cause of that or just stop it.
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
Who is developing CWM ? I would test Beta versions if needed
twrp
jacbarahona72 said:
This is just the compilation of the work of several Seniors Members and Contributors Recognized in this forum.
I simply change some lines so that we have the files that I present.
Only Install via Custom Recovery (CWMR or TWRP) for those who want to try one or the other recovery
Thanks, Credits and Cheers to Them.
@turl1 CWMR
@rickwyatt CWMR version Black
@Hazou TWRP
@HSD-Pilot Script Boot.img (This one I adapted)
Downloads
Recovery CWMR Black.zip
Recovery CWMR Gray.zip
Recovery TWRP 2.6.zip
Greetings and Luck and sorry for my bad English
Note: I am not responsible for what happens to your phone by using these files, I've tried and I have worked on my two phones Razr I
To see the changes, at the end of any recovery flash, search and select, in the menu of your recovery -> reboot in recovery
This restart the phone in recovery you just flash
Click to expand...
Click to collapse
will you update your twrp-zip to v2.61 ?
paulle said:
will you update your twrp-zip to v2.61 ?
Click to expand...
Click to collapse
Link to 2.61?
Not yet available, will update twrp soon for our device
Sent from my GT-P5110 using XDA Premium HD app
paulle said:
will you update your twrp-zip to v2.61 ?
Click to expand...
Click to collapse
Octopus read the first post, I am not developer
Edit: Update thanks @Hazou
Enviado desde mi XT890 usando Tapatalk 4
Nice work!
Sent from my XT890 using XDA Premium 4 mobile app
To fix 2.6.1.1 twrp installation issues go to updater-script and delete the format system line, and format it in twrp among with the wipes
Updated the CWM.
The problem u have with twrp2.6.1.1. i cant reproduce it. Even with the file downloaded from this xda and flashed on my friends razr i.
Can u try it one more time and make sure u got the right one I would apreciate it!
Hi
I can not flash Omars Rom with CWMR 6.0.3.6
It gets stuck after ~ 3 seconds.
Did a Power Button + Vol Down Reboot and flashed CWMR Black back.
This recovery could flash the same .zip file without problem.
greetings
Killigrew said:
Hi
I can not flash Omars Rom with CWMR 6.0.3.6
It gets stuck after ~ 3 seconds.
Did a Power Button + Vol Down Reboot and flashed CWMR Black back.
This recovery could flash the same .zip file without problem.
greetings
Click to expand...
Click to collapse
As I said in the 1st post ..... I do not serve, for example TWRP 2.6.1.1 .... yet others if
I use TWRP 2.6.0.0 .....
Note: CWMR black and "Standar or Gray" version and TWRP 2.6.0.0, we serve all
I have searched everywhere in dozens of posts about using the CWM recovery and backup and tried several things with no luck.
What I have: sony xperia tl lt30at, rooted, locked bootloader, 4.1.2 JB, .120 build#
What I think I have: CWM Recovery
What I am trying to do: Install XperimenT Custom ROM or some ROM that will work with lt30at (I just want to make something work)
What's stopping me thus far: I can't Backup my Stock ROM and can't get into Recovery
So far i have successfully rooted my phone and I believe that I have installed a CWM-based recovery --> http://forum.xda-developers.com/showthread.php?t=2012738 I have the zip file to the ROM that I want to use but I can't/don't want to do anything until I create a Backup of my stock ROM. I tried to do this through ROM Manger but every time I try it only reboots my phone without saving the backup. I read that I could create a Backup in Recovery mode but I'm also having trouble getting there. This makes me believe that I don't have CWM installed but the code in CMD read that it was successfully installed and I have a folder for it.
My Questions: Am I doing something wrong? Have I left out a step? Is this impossible to do with a locked bootloader?
Thanks in advance!
Try rebooting the phone and pressing volume up repeatedly when you see the Sony logo. Don't bother with rom manager.
I take it you didn't read the all in one thread.... All the info you need is there
Sent from my C6903 using XDA Premium 4 mobile app
gregbradley said:
Try rebooting the phone and pressing volume up repeatedly when you see the Sony logo. Don't bother with rom manager.
I take it you didn't read the all in one thread.... All the info you need is there
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've already tried that. It looks as if its trying to load into recovery but it just continues on to boot up.
techxxme said:
I've already tried that. It looks as if its trying to load into recovery but it just continues on to boot up.
Click to expand...
Click to collapse
Well you have not installed recovery then.
Read the all in one thread, especially post 2 and 3, and see how to install recovery properly.