Problem with Power Button and Menu AutoScrean off
I have a Galaxy Note N7000. On it is a version N7000XXLSC_N7000OXALSC_N7000XXLSC What I normally put on the pre root the phone with the help mobileodin. Everything works great and of course AutoScrean me off and power button.
When you put the version
N7000XXLSZ_N7000OXALSZ_DBT
and
N7000XXLSZ_N7000OXELS7_SER
No AutoScrean off and power Menu Button.
do
First Factory reset - did not fix the problem
Second - With the "terminal emulator" enter the following code
are
ON echo-n> / EFS / IMEI / keystr
sync
reboot
The phone restarts but when I have picked up again AutoScrean and Power Off menu button
Please help thanks
... Is that the only problem i have with my n7000 with autoscrean off and the power menu button version 4.1.2 jb n7000xxlsz_n7000oxalsz_dbt
It might be because you flashed them through mobile odin... try flashing them with Odin on your computer.
... I tried a PC via Odin the same result ...
Related
hi,
my power button dont work in the recovery menu! i dont can select any options. vol down + up works..
any ideas?
i flash i9000JM8 today, maybe there is the failz
edit:
now i flashed JM7.. still dont work
download mode
512pit +reparti +efs clear
battery out - download mode
CODE_I9000XWJM7.tar.md5
CSC_I9000OXXJM1.tar.md5
battery out - download mode
kernel-captivate-stock.tar.md5
reboot + adb recovery reboot
i can navigate with vol down + up but can´t select any option with the power button
H03! said:
hi,
my power button dont work in the recovery menu! i dont can select any options. vol down + up works..
any ideas?
i flash i9000JM8 today, maybe there is the failz
edit:
now i flashed JM7.. still dont work
download mode
512pit +reparti +efs clear
battery out - download mode
CODE_I9000XWJM7.tar.md5
CSC_I9000OXXJM1.tar.md5
battery out - download mode
kernel-captivate-stock.tar.md5
reboot + adb recovery reboot
i can navigate with vol down + up but can´t select any option with the power button
Click to expand...
Click to collapse
recovery menu won't work with I9000 kernel on captivate, you need to flash a stock captivate kernel if you want to use the I9000 Rom.
did the captivate kernel flash finish successfully ?
if you see GT i9000 logo in boot up u still have i9000 kerner
thx 4 answer
i flashed it again and then it works.
dont know where´s the fail.
thx
u stuck in recovery mode, how u can go into download mode?
@ron
procedure A: (works with stock fw)
battery out/battery in
hold down [VOL +] and [VOL -]
plug in the usb
procedure B: (works with i9000 fw i think)
battery out/battery in
hold down [VOL +] and [POWER]
or procedure C:
phone in debugmode
adb reboot download
Nothing to see hear, misread something...
don't know if this works with the i9000 kernel but the back button on the bottom acts as a select button as well.
Hi guys,
i flashed my sgs with super optimised kernel 3.7 from 3.6 .... = bad news ... i realised that my home button does not work anymore so i have to use the back button instead of home button it took me many hours to figure and fix my sgs but still no home button working but at least my sgs did not turn into a paperweight.
below are the series of events that happened (i tried to put it in order as much as possible)
- home button stopped working
- alot of FC'ing
- sgs kinda like jammed or stuck
- did a full reflash from step 1 [HOWTO] Froyo FW I9000XXJPM: Upgrade via Odin, Root, Recovery 2e, Lagfix! several times !
- flashed a couple of times but when phone enters recovery mode after 1st flash i cant select wipe data/cache cos home button not working so phone was turned off and entered download mode then flashed JPM.
- also tried to flash in 3.6 version kernel couple of times to overwrite 3.7
- here are some stuff i saw along the way :
--there were occasions i see a mobile logo with arrow pointing to pc (just like the background pic of recovery menu but no menu till i unplug usb)
--after reflash when it enters recovery mode automatically it will then not show menu and android logo with a caution sign was seen but when usb cable is unplugged recovery menu comes back but still no luck to wipe data/cache cos home button not working
--instead of seeing recovery 2e , 3e was shown but then again i cant select wipe data/cache due to home button not working
i'm sure many reading this is figuring how i managed to enter recovery or download mode without the home button ???
-- just hold vol up/down + power button home button is not needed in my case !
while in recovery menu, i cant select or do anything with home button except moving vol up/down button to highlight selection but cannot "enter" with home button so i turned the phone off and continued flashing JPM and it works.
but while inside the 3.6 or 3.7 kernel, i can move up or down using vol switch and how did i manage to "enter" selection without home button ? i discovered that the power button does the "enter" !
home button was working intermittently but it comes with double click where you bring the last 6 used apps and task manger selection .. but now it does not come up anymore. still can feel the click on the home button but no response as for now.
also flashed several times as mentioned with re-partition ticked to try to wipe everything but still same results.
so now i have ended up with :
PDA : I9000XXJPM
Phone : I9000XXJPM
CSC : I9000 OXAJPM
Build info : 2010.10
Baseband : I9000XXJPM
Kernel Version : 2.6.32.9
[email protected] #19
Build Number : FROYO.XXJPM
i have also tried many ways such as formatting sd, system, basically almost every menu in the kernel ! basically i wiped out previous data (my guess) but all the apps + data are gone. it was a PITA process.
now it is just the freaking home button does not work anymore ! but nevertheless quadrant still shows 2216 ! and the phone is still blazing fast .
hope someone could help out i have tried to do the search function but not much luck related to my issue.
i have the same problem .... my home button is dead as well -.-'
Flash back to an Eclair firmware. See if that changes anything.
snapper.fishes said:
Flash back to an Eclair firmware. See if that changes anything.
Click to expand...
Click to collapse
just tried. home button still dead ...
luckly my phone is still in warranty ..
Hi guys, I need your help, I need the Stock-Rom for Samsung Galaxy Note, I installed ICS by chainfire but don´t works good on my N7000 also my home button dont work and I need warranty for my carrier.
Stock- rom has the following information:
baseband version ------------ N7000UBKI6
kernel version ---------------- 2.6.35.7-N7000UBKJ8-CL684892 [email protected]#2
Build number ----------------- GINGERBREAD.UBKJ8
My carrier is TELCEL of MEXICO
I hope that you can help me please
If your home button is working ,Turn off your device completely. try to enter download mode by pressing and holding Volume down + Home + Power for 10 Secs. and press volume up for download mode confirm.
If your Home button is not working at ll
Turn off device. Remove battery. Press volume up button and put battery in and keep holding the volume up button . then connect PC Data cable to Device and PC. By doing this your Device should get into Download mode.
If above method doesnt work , Get USB JIG and turn off device. Just insert USB JIG to USB mini port. don't press any button. device ll enter Download mode automatically.
More info on USB JIG here
http://forum.xda-developers.com/showthread.php?t=1354888
Download KL6 from below thread
http://forum.xda-developers.com/showthread.php?t=1424997
Download Odin also from same link
If you enter download mode.
And follow the instruction to flash Stock ROM in the same thread.
THANKS
thanks for your attention, but you can help to obtein the stock rom?
Doesn't appear to be floating around freely, but maybe you can ask that guy from Mexico if he's in a position to share it ?
http://forum.xda-developers.com/showpost.php?p=23287191&postcount=1114
Hello,
So I have a galaxy mini s5570i version and I tried to flash recovery on it. As i realized Odin can't seem to identify this version, I might be wrong tho, god hope so. So i tried to find another way of flashing it. I managed to get root on it (with an update.zip) but I couldn't find any cwm for it, so at last I tried my luck by putting the s5570 cwm 5.2.0.8 touch recovery on it via the original recovery.
Now the phone hangs on boot logo, I assume it can't find the system partition or something like that.
I'm still able to get into stock recovery and download mode.
What are my options?
Can I get custom recovery on it via odin or sd card or somehow?
Can I get back to original Android at least via sd and downloaded stock ROM and update that?
Thanks in advance
Your Phone is Probably soft bricked.
If your phone can go to odin mode, (Vol. Down + Home Button + Power Button) you are saved.
1. Download this: S5570I.rar
http:
//www.
mediafire.
com/?0ct2k0ujc4ys9z7
Extract it
2. Open Odin3_v1.84.exe
3. Press BOOTLOADER and choose DefaultCalData....
4. Press PIT and choose tassve_0623.pit
5. Press PDA and choose PDA_S5570I....
6. Press PHONE and choose MODEM_S5570I....
7. Press CSC and choose GT-S5570I-MULTI....
8. Shut down your phone if it isn't
9. Reboot it in ODIN Mode (Volume Down + Home + Power)
10. Press Volume Up to enter The Odin Download Mode
11. Now the ODIN should recognize your phone (Yellow text comes up in the program LEFT upper corner)
12. Press start
13. Just wait and your phone will auto reboot.
Change the language by pressing the bottom right button when booted, because it will start at some language i don't know
I Split the Link because i have not post 10 posts yet Just Copy it.
Click Thanks if this works for you
YOUR ODIN MUST RECONISE IT (Yellow Box at the left) AND USE BOOTLOADER FIRST!!
missing parts
i also have Bricked Galaxy Mini. it lags on SAMSUNG logo,and not booting. but i've checked that phone is missing some parts: earpiece speaker flex.
so this missing part may be problem of not booting?
odin also not flashing,i tryied all knowing metods.
dglteam said:
i also have Bricked Galaxy Mini. it lags on SAMSUNG logo,and not booting. but i've checked that phone is missing some parts: earpiece speaker flex.
so this missing part may be problem of not booting?
odin also not flashing,i tryied all knowing metods.
Click to expand...
Click to collapse
DId u try Volume Down + Home Button + Power Button?
If u cant get to odin means ur phone is probably dead
FixMyProblems said:
DId u try Volume Down + Home Button + Power Button?
If u cant get to odin means ur phone is probably dead
Click to expand...
Click to collapse
yes, it turns into Download mode. but Odin did not recongnise phone. it says: odin mode..check platform verification
FixMyProblems said:
Your Phone is Probably soft bricked.
If your phone can go to odin mode, (Vol. Down + Home Button + Power Button) you are saved.
1. Download this: S5570I.rar
http:
//www.
mediafire.
com/?0ct2k0ujc4ys9z7
Extract it
2. Open Odin3_v1.84.exe
3. Press BOOTLOADER and choose DefaultCalData....
4. Press PIT and choose tassve_0623.pit
5. Press PDA and choose PDA_S5570I....
6. Press PHONE and choose MODEM_S5570I....
7. Press CSC and choose GT-S5570I-MULTI....
8. Shut down your phone if it isn't
9. Reboot it in ODIN Mode (Volume Down + Home + Power)
10. Press Volume Up to enter The Odin Download Mode
11. Now the ODIN should recognize your phone (Yellow text comes up in the program LEFT upper corner)
12. Press start
13. Just wait and your phone will auto reboot.
Change the language by pressing the bottom right button when booted, because it will start at some language i don't know
I Split the Link because i have not post 10 posts yet Just Copy it.
Click Thanks if this works for you
YOUR ODIN MUST RECONISE IT (Yellow Box at the left) AND USE BOOTLOADER FIRST!!
Click to expand...
Click to collapse
many many thanks to you my friend.. finally finished .. thanks a lot
sir plz guide me my phone is stuke when i start mobile
Hello.
I'm tryint to root my phone with 2nd method on this link http://forum.xda-developers.com/showthread.php?p=27596546
first download files from here
cwm recovery
doomlord's kit
boot phone in download mode by pressing vol down+home key+power button
open odin3 1.85
click the PDA button on the midle right and then select clockworkmod-5.0.2.8.tar.md5 that you downloaded
click start.
w8 for it to say pass with green background
now the phone will boot normally
shut it down again and press vol up+down+home+power to go to recovery
it will show gt-s7500 but it doesnt matter!
Now close Odin
when it gives you a menu go to your pc to the rootme.zip that you downloaded
extract everything in desktop
run the runme.bat (my first time failed so repeat)
w8 for it to finish
press the home button (it should be on the first choise of the menu "reboot system" )
you are done!
ENJOY ROOTED S6500 AND s6500D
Click to expand...
Click to collapse
everything in green works for me but after I press vol up+home+power I don't see gts7500 it's the same gts6500d adn there is no menu I get only this screen: http://i.imgur.com/G5TduZ8.jpg
You use volume up + power + home to open recovery?
It's volume up + volume down + power + home
If I HelpeD U PresS ThankS
Sent from my device GT-S5570I in my own words