Hi all,
I've just flashed the stock rom from sammobile N7000UBLSF_N7000UUBLSF_TTT.zip, previously I was using the N7000XXLSZ_N7000OXALSZ_DBT.zip. Both has the same problems:
1. Can't use PhilZ kernel to root.
2. Notification Panel always became force close.
Anybody can help?
eguytronic said:
Hi all,
I've just flashed the stock rom from sammobile N7000UBLSF_N7000UUBLSF_TTT.zip, previously I was using the N7000XXLSZ_N7000OXALSZ_DBT.zip. Both has the same problems:
1. Can't use PhilZ kernel to root.
2. Notification Panel always became force close.
Anybody can help?
Click to expand...
Click to collapse
Of course you can flash and use Philz kernel. Obviously you aren't doing it in a correct way.
So please tell us how you installed the stock Roms and how you tried to install Philz kernel after this.
I used odin v3 to flash both files, stock rom and philz.
Sent from my GT-N7000 using xda app-developers app
eguytronic said:
I used odin v3 to flash both files, stock rom and philz.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
After installing the Rom with PC Odin copy the kernel (download the zip version) to your sd card and switch to the recovery.
Install the kernel there and reboot. After that you're rooted.
Please do not send me PM with questions like this - I do not like private tutorials - if you have a question post it in the forum - like you did here. Thanks.
So u mean i need to use custom recovery? Like CWM? Currently I'm using the stock recovery. If i use the custom, wouldn't there will be yellow triangle?
Sorry, i thought PM would be mor convinient for u cause the topics in the forum are added so quickly and u will find it hard to browse for my reply.
Sent from my GT-N7000 using xda app-developers app
eguytronic said:
So u mean i need to use custom recovery? Like CWM? Currently I'm using the stock recovery. If i use the custom, wouldn't there will be yellow triangle?
Sorry, i thought PM would be mor convinient for u cause the topics in the forum are added so quickly and u will find it hard to browse for my reply.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Nooo, I didn't say anything about custom recovery (what is this?). Flash PhilZ kernel in stock recovery. See his thread and follow the installation instructions. And start to read the tutorials - because learning by one question after the other will only result in stopping answering you.
Related
Hey guys, Recently my dad got a Galaxy Note (N7000) and he has been complaining about The Note 2 getting jelly bean and stuff.
I already rooted it for him with Superuser.
I want to install a custom rom for him but I read a lot of topics saying that theres a very high chance on bricking your device using CWM and stuff.
If anyone could post a step by step guide, That would be super-appreciated, Thank you in advance.
Phone info
-Android 4.0.4
Baseband - N7000DXLR1
Kernel - 3.0.15-N7000DXLR5-CL968032
Build Number - IMM76D.DXLR5
Hello, here's a link to a step by step. Follow it perfeclty, and u will not brick ur fone.
http://www.androidauthority.com/galaxy-note-gt-n7000-root-android-4-0-4-ics-xxlrg-102122/
Search for liquidsmooth rom and flash it. It's a great rom and very smooth as it's name.
{Helpful, thank me}
Sent from my GT-N7100 using xda premium
jgkhalil said:
Hello, here's a link to a step by step. Follow it perfeclty, and u will not brick ur fone.
http://www.androidauthority.com/galaxy-note-gt-n7000-root-android-4-0-4-ics-xxlrg-102122/
Search for liquidsmooth rom and flash it. It's a great rom and very smooth as it's name.
{Helpful, thank me}
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks for the quick reply, question. Whats XXLRG firmware?
Xxlrg is related to german and liquidsmooth is based on dat firmware
Sent from my GT-N7000 using xda app-developers app
jgkhalil said:
Hello, here's a link to a step by step. Follow it perfeclty, and u will not brick ur fone.
http://www.androidauthority.com/galaxy-note-gt-n7000-root-android-4-0-4-ics-xxlrg-102122/
Search for liquidsmooth rom and flash it. It's a great rom and very smooth as it's name.
{Helpful, thank me}
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
He's already rooted and on stock kernel, if he tries to flash a ROM using above CWM.zip or does factory reset on it, he will brick his device.
Best advice is to go Here, download PhilZ-cwm6-DXLR5-OLB-2.7-signed.zip (that's the one that is compatible with his ROM) and put it on external SD card. From there, boot into recovery mode, and flash Philz kernel from external storage. (It's the only one that can be flashed from stock recovery). Then phone will be fully rooted with safe stock kernel and safe CWM recovery. Only then should any attempt be made to flash ROMs from recovery.
Re: CWM.zip READ THIS
Easiest for me is to flash ICS of your choice using Odin. Then flash speedmod-kernel-n7000-ics-k3-13-Odin.tar using Odin. Select PDA in Odin to use this file. Google it up. Double check that the file you get is for ICS N7000 and that it is the Odin version.
The end result will be a rooted ICS that you can safely wipe. It also has Clockworkmod installed. This allows you to flash custom JB roms. You may get a yellow triangle upon reboot. Just buy Triangle Away on Google Play store. Reset the counter using the app.
But flashing philz from stock doesn't result in triangle, raised counter and need for triangle away. Surely easier
Sent from my GT-N7000 using xda app-developers app
If he has to ask what is xxLRG, thr i wont even advice him to flash custom roms.
Sell the Note and get your father a Note2. Chances are, he will complain of so many things "not normal" once in custom rom, etc.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
If he has to ask what is xxLRG, thr i wont even advice him to flash custom roms....
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yeah you're right - Noob Alert!
Sent from my GT-N7000 using xda app-developers app
+1 bro
Sent from my GT-N7000 using xda app-developers app
Deathsongx3 said:
Hey guys, Recently my dad got a Galaxy Note (N7000) and he has been complaining about The Note 2 getting jelly bean and stuff.
I already rooted it for him with Superuser.
I want to install a custom rom for him but I read a lot of topics saying that theres a very high chance on bricking your device using CWM and stuff.
If anyone could post a step by step guide, That would be super-appreciated, Thank you in advance.
Phone info
-Android 4.0.4
Baseband - N7000DXLR1
Kernel - 3.0.15-N7000DXLR5-CL968032
Build Number - IMM76D.DXLR5
Click to expand...
Click to collapse
you read the stickies in forum section, search for dr ketans guide. All your info is already available
btw you cant root with super user alone....
Sent from my GT-N7000 using Tapatalk 2
Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app
hoursenghong said:
Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1329360
^^ Is a good place to start, I would say the easiest way would be to download philz kernel for your version (LRB) and flash it through the stock recovery, this will give you root and CWM and from there on the limits are endless.
or you can use philz ODIN version or even HydraCore ODIN version and flash them using ODIN (obviously ) but this will give you yellow triangle (easily removed with triangle away app)
Flash philz kernel, then use pc odin or mobile odin to flash your custom rom.
Anyway you can use the search functions to get more in deep information.
Sent from my GT-N7000 using xda app-developers app
feartheanonymity said:
http://forum.xda-developers.com/showthread.php?t=1329360
^^ Is a good place to start, I would say the easiest way would be to download philz kernel for your version (LRB) and flash it through the stock recovery, this will give you root and CWM and from there on the limits are endless.
or you can use philz ODIN version or even HydraCore ODIN version and flash them using ODIN (obviously ) but this will give you yellow triangle (easily removed with triangle away app)
Click to expand...
Click to collapse
too heavy for me, please give me an easy method(u recommend) include download link, and one more thing is i dont have credit card for mobile ODIN.
hoursenghong said:
Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
-Download This
http://www.mediafire.com/?kesmwbjbnux4i1p
and copy to ext SD card
-reboot to recovery
-select install/update zip from ext SD
-choose zip (file you have copied)
-Flash
done
This s short procedure but though i recommend to read above said thread to get detail information.
Hey bro. I dont have ext sd card. Can i use it with my usb storage?
Sent from my GT-N7000 using xda app-developers app
no.. stock recovery only flashes from external storage.. use the exynos exploit app by chainfire to root .. then use mobile odin to install Philz or speedmod or hydracore.. then you are set to flash custom roms
its the 0.Root with apk procedure in the thread mentioned by Dr ketan
This is much harder than my old infuse 4g. M so confuse... Now u mean i need to root using exynos blabla then install file(mediafire link above) using odin? I dont have credit card for mobile odin, but i have pc odin.
Sent from my GT-N7000 using xda app-developers app
not the above link but you need to use tar.md5 file version of kernel.. as mobile odin wont recognize that,,
here link to MO by its Dev
http://forum.xda-developers.com/showthread.php?t=1347899
You can use pc odin but that will increase the counter and cause yellow triangle at boot
Rooted using exynos already. Installing MO and mobileODIN flashkernel N7000 already. Then what?
Sent from my GT-N7000 using xda app-developers app
?
What kernel did you flash using mo?
OP said if i install MO lite i need to install flashkernel N7000 v3.0.apk i didnt flash anything yet
Sent from my GT-N7000 using xda app-developers app
First install the mo kernel and then open mo again. Then flash the custom kernel of your choice.
Can u give me kernel link for my device?
Sent from my GT-N7000 using xda app-developers app
Got philz now... 2question:
1. If i want to install custom rom, what m gonna do? Do i need right one like " for XXLRI blabla"?
2. Where can i get stock 4.0.4 without root?
Sent from my GT-N7000 using xda app-developers app
hoursenghong said:
Got philz now... 2question:
1. If i want to install custom rom, what m gonna do? Do i need right one like " for XXLRI blabla"?
2. Where can i get stock 4.0.4 without root?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
if u already have a rooted and philz installed...just download the custom RoM of ur choice in the Development sector and use the recovery to flash it.
and if u want stock 4.0.4 ..use this thread http://forum.xda-developers.com/showthread.php?t=1424997
I apologies If I'm posting in the wrong section, I literally just signed up. I've rooted my device and have got the jellymod file downloaded, however I've looked at some tutorials (couldn't find one specifically for I9070) and they say to use ROM manager with clockwork mod however it seems my model isn't supported so I'm quite stuck, help please!
Azykk said:
I apologies If I'm posting in the wrong section, I literally just signed up. I've rooted my device and have got the jellymod file downloaded, however I've looked at some tutorials (couldn't find one specifically for I9070) and they say to use ROM manager with clockwork mod however it seems my model isn't supported so I'm quite stuck, help please!
Click to expand...
Click to collapse
Do NOT use rom manager...can result in a brick. After you've rooted, install a custom kernel with custom recovery and then just flash the jellymod using custom recovery after placing it in the ext sd card..
Follow this guide
http://forum.xda-developers.com/showthread.php?t=2198341
Hope that helps..
Sent from my GT-I9070 using xda premium
rushilkr said:
Do NOT use rom manager...can result in a brick. After you've rooted, install a custom kernel with custom recovery and then just flash the jellymod using custom recovery after placing it in the ext sd card..
Follow this guide
http://forum.xda-developers.com/showthread.php?t=2198341
Hope that helps..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Thank you for the quick reply, could you recommend a custom kernel to get?
Azykk said:
Thank you for the quick reply, could you recommend a custom kernel to get?
Click to expand...
Click to collapse
Go with CoCore..the same which is in the guide.. i believe that is 5.0 version.. you can update it later to 5.6 or 6.0 if you want to..
Edit- the link is to the main cocore thread.. so you can go ahead and install the latest i.e 6.0 with either twrp or cwm recovery..
Sent from my GT-I9070 using xda premium
i rooted my phone a couple of weeks ago thanks to a thread from u guys. am still on custom recovery cos i cant figure out a way to install clockword mod recovery. everytime i try to flash a rom it keeps saying signature verification failed. please help
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
aayushkhajuria2842 said:
Another guide to install cocor9.0 kernel with cwm or twrp recovery whichever u want
Click to expand...
Click to collapse
This is SPAM.
This is advertised for your website. If you want to help someone, make it by posting HERE all steps to be taken, as I did not with external link.
Okkkkkk bro
Sent from my GT-I9070 using xda app-developers app
thanks.. am getting on it
R_a_z_v_a_n said:
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
Click to expand...
Click to collapse
already have es explorer
how to i install the ufk... do i do it as a normall apk?
R_a_z_v_a_n said:
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
Click to expand...
Click to collapse
which kernel do you suppose i use and wher do idownload them.
would really appreciate links please
Only one kernel is available for gt i9070 that is cocore .......and universal kernel flasher can b downloaded from playstore
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
which kernel do you suppose i use and wher do idownload them.
would really appreciate links please
Click to expand...
Click to collapse
You don't tell us WHAT FIRMWARE you have on your phone.
Jelly Bean or GingerBread?
R_a_z_v_a_n said:
You don't tell us WHAT FIRMWARE you have on your phone.
Jelly Bean or GingerBread?
Click to expand...
Click to collapse
jelly beam 4.1.2
i jus did what you said and my phone does not boot
i only get the buzzer and nothing on the screen
even if i plug it in charge still same thing only buzzer
am going crazy dont know what to do i dont have money for a new phone pls what caused that
Can I ask what have u done nd what is buzzer
Sent from my GT-I9070 using xda app-developers app
aayushkhajuria2842 said:
Can I ask what have u done nd what is buzzer
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
installed ukf
downloaded the kernel for cmw extracted and flashed kernel via ukf
it was successful so i pressed reboot and thats it
and the buzzer as in it only vibrates
Samsung logo appearing ?
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
installed ukf
downloaded the kernel for cmw extracted and flashed kernel via ukf
it was successful so i pressed reboot and thats it
and the buzzer as in it only vibrates
Click to expand...
Click to collapse
You will not need to buy new phone. Just download stock JB firmware and flash it with Odin.
You can find firmware on samsung-updates.com - just do not flash I9070P firmware on I9070 phone, or I9070 on I9070P (it will HARDBRICK your device).
How to use Odin: http://forum.xda-developers.com/showthread.php?t=1985398
What was the name of kernel that you downloaded? Name of that zip.
If logo is not appearing nd it only vibrates then can odin method b used?
Sent from my GT-I9070 using xda app-developers app
but i cant get into download mode how then do i use odin
shut_down said:
You will not need to buy new phone. Just download stock JB firmware and flash it with Odin.
You can find firmware on samsung-updates.com - just do not flash I9070P firmware on I9070 phone, or I9070 on I9070P (it will HARDBRICK your device).
How to use Odin: http://forum.xda-developers.com/showthread.php?t=1985398
What was the name of kernel that you downloaded? Name of that zip.
Click to expand...
Click to collapse
i cant get into download mode
derkyflick said:
i cant get into download mode
Click to expand...
Click to collapse
Volume Down + Home (hardware key from the front part of the phone) and Power at the same time. You used those? Pull out battery, put back in and retry.
P.S. You did not tell what zip did you used.
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
aayushkhajuria2842 said:
If logo is not appearing nd it only vibrates then can odin method b used?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
It could happen that he got in a bootloop.
the zip was posted in this thread
Sent from my GT-I9100 using xda app-developers app
Bro 2 months ago I also suffred from same thing didnt find anyway to fix it myself ....gave it to samsung care centre nd motherboard was replaced toh bring it back
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
the zip was posted in this thread
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Again. Link is for CoCore, you did not write what was the zip name.
And again, did you try to pull out the battery and retry to go in download mode. What buttons do you use for getting in download mode?
You must give us more information that we can help you.
Volume up plus home button plus power button
Sent from my GT-I9100 using xda app-developers app
Hi guys,
I am now stuck at finding a compatible CMW for my N7000SZLA2 Kernel. Does anyone know how to flash custom room without using CMW app or have a link to download N7000SZLA2 Kernel. Please help,
Thank you very much,
AnmiacAndroid said:
Hi guys,
I am now stuck at finding a compatible CMW for my N7000SZLA2 Kernel. Does anyone know how to flash custom room without using CMW app or have a link to download N7000SZLA2 Kernel. Please help,
Thank you very much,
Click to expand...
Click to collapse
Go to Here to read and find your answers. If you're still stuck, then ask again. Even though there a few custom roms that can be flashed through Odin, I suggest you avoid using it unless you want to flash stock firmwares.
How to upgrade my Note to 4.0 ? I check the update but nothing show up, I tried to using Kie but still nothing ? I searched this forum but It seem my phone don't have a change to upgrade.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
sangvu86 said:
How to upgrade my Note to 4.0 ? I check the update but nothing show up, I tried to using Kie but still nothing ? I searched this forum but It seem my phone don't have a change to upgrade.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Why would u choose 4.0 with all the emmc brick bug threat presents? Search the forum or google with the keyword "how to upgrade my N7000 from Gingerbread to Jellybean/ICS" n see what turns out.
Sent from my GT-N7000 using XDA Free mobile app
Here my system info. I rooted it successful by using kingo. How do I flash a JB room ? Do I need to flash kernel before flashing 4.1.2 room ?
Many thanks
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
sangvu86 said:
Here my system info. I rooted it successful by using kingo. How do I flash a JB room ? Do I need to flash kernel before flashing 4.1.2 room ?
Many thanks
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Hello. Firstly, I'm sorry to say that I don't have much experience as mine came directly from ICS. I can suggest a long roundabout way which is to update your android vers. from GB To JB through Odin procedure first, then just flash philz safe kernel. and then flash any roms u want. Or if you just want stock JB, then u can download stock JB firmware n flash it through odin.
Edit : Go Here And watch the video and read. The link for the kernel provided includes CWM. After Installing CWM, you can directly flash philz safe kernel, reboot to recovery, do a clean wipe and formats (Follow OP of the rom you want to install)