Database Develop

[Q] 3G problem on CM10.1

Hi to all,
I installed CM 10.1, but now I have problems with 3G network. I don't have internet. I make all settings that it should be, but there is still no 3G. I didn't have this type of problem with earlier stock ICS. It was automatically work.
What adjustment should i make, to make this functional?
Thank you

luka78 said:
Hi to all,
I installed CM 10.1, but now I have problems with 3G network. I don't have internet. I make all settings that it should be, but there is still no 3G. I didn't have this type of problem with earlier stock ICS. It was automatically work.
What adjustment should i make, to make this functional?
Thank you
Click to expand...
Click to collapse
First i Would try to flash the newest Baseband for your device
Second please notice that cm10.1 is still a Nightly version and not totaly Bugfree

Darkmind82 said:
First i Would try to flash the newest Baseband for your device
Second please notice that cm10.1 is still a Nightly version and not totaly Bugfree
Click to expand...
Click to collapse
Ok, thank you. Now I have:
Baseband: LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0
Kernel: 2.6.39.4-CM+ [email protected] #1
Android version: 4.2.1
Cyanogenmod version: 10.1-20130128-Nightly-p990
What should I do, to make it operational?
Thank you

Solved! I needed just to enter new APN.

CyanVivo 10.1 07/31 ver. 2 camera green screen

Hello,
I have my Incredible's a system made ​​with the format then Rome 07/31 ver 2 by Szezso and installs the updated kernel Tesco For AOSP JB (4.2) based ROM (CM10.1, Pacman, etc.). But I still get the green screen camera. Where is my mistake?
thank abgfritz

abgfritz said:
Hello,
I have my Incredible's a system made ​​with the format then Rome 07/31 ver 2 by Szezso and installs the updated kernel Tesco For AOSP JB (4.2) based ROM (CM10.1, Pacman, etc.). But I still get the green screen camera. Where is my mistake?
thank abgfritz
Click to expand...
Click to collapse
It isn't fixed yet. wait for updates..
Sent from one of the few remaining Incredible S'

abgfritz said:
Hello,
I have my Incredible's a system made ​​with the format then Rome 07/31 ver 2 by Szezso and installs the updated kernel Tesco For AOSP JB (4.2) based ROM (CM10.1, Pacman, etc.). But I still get the green screen camera. Where is my mistake?
thank abgfritz
Click to expand...
Click to collapse
You can try Camera JB+ from the play store .It is not my suggestion.I read about it in some thread...Some one asked roughly the same question (different ROM though...cyanvivo x) and found the answer...here is the link
h_t_t_p://forum.xda-developers.com/showthread.php?p=43813456
please remove the underscores in the link (i cannot post links as i am new here)

Thank you I will try :good:

pavankumarpingali said:
You can try Camera JB+ from the play store .It is not my suggestion.I read about it in some thread...Some one asked roughly the same question (different ROM though...cyanvivo x) and found the answer...here is the link
h_t_t_p://forum.xda-developers.com/showthread.php?p=43813456
please remove the underscores in the link (i cannot post links as i am new here)
Click to expand...
Click to collapse
Thk U,that's actually usefull

[Q] (CM11) Have anyone seen & and try these CM11 ROMS b4?

I haven been here for a while please remove my thread if this is not apporiate or have been asked b4
I been following androidarmv6 on jenkins though and realized they have been updating kitkat roms
theres even a stable version dated 18 May 2014
I tried the lastest nightly as of 31 May 2014 video camera is not working yet
So these ROMs are built by armv6 team or?
http://jenkins.androidarmv6.org/view/All/job/cm-ota/
http://download.androidarmv6.org/_builds/cooper/

mudkipstar said:
I haven been here for a while please remove my thread if this is not apporiate or have been asked b4
I been following androidarmv6 on jenkins though and realized they have been updating kitkat roms
theres even a stable version dated 18 May 2014
I tried the lastest nightly as of 31 May 2014 video camera is not working yet
So these ROMs are built by armv6 team or?
http://jenkins.androidarmv6.org/view/All/job/cm-ota/
http://download.androidarmv6.org/_builds/cooper/
Click to expand...
Click to collapse
Yes, these roms are built by androidarmv6 team. Haven't personally tried the new one's, so can't say more about those roms. Hope I Helped

thanks for the reply, theres recently a stable built released, is it really stable or? Can someone from armv6 answer this hahas?

mudkipstar said:
thanks for the reply, theres recently a stable built released, is it really stable or? Can someone from armv6 answer this hahas?
Click to expand...
Click to collapse
Yes, there're here CM11 STABLE Releases
You'll need CWM 6.x recovery, a based CWM6 recovery or TWRP 2.7.0.0 recovery to flash those ROM correctly
Finally here you'll find CM11/OMNI/OMEGA roms, you can flash using a CWM 5.x based recovery

Viper The Ripper said:
Yes, there're here CM11 STABLE Releases
You'll need CWM 6.x recovery, a based CWM6 recovery or TWRP 2.7.0.0 recovery to flash those ROM correctly
Finally here you'll find CM11/OMNI/OMEGA roms, you can flash using a CWM 5.x based recovery
Click to expand...
Click to collapse
thx for the tip , what are the known bugs in CM11 for now?

I think that those releases are also the same as in this topic: http://forum.xda-developers.com/showthread.php?t=2659269

skoda9635 said:
I think that those releases are also the same as in this topic: http://forum.xda-developers.com/showthread.php?t=2659269
Click to expand...
Click to collapse
Exactly. The author has only modified the update-script so that we can flash it from CWM 5 rather than from CWM 6

mudkipstar said:
thx for the tip , what are the known bugs in CM11 for now?
Click to expand...
Click to collapse
AFAIK video recording and maybe fm radio

mudkipstar said:
thx for the tip , what are the known bugs in CM11 for now?
Click to expand...
Click to collapse
i try most of them even the new one..
thing is they r stables but full off bug
video doesn't work
fm same problem;
same time it lost sdcard req reboot..
very slow; and it have a problem with file explore. i didn't show any file same time..
work well without gapp (my experience)

s.tanbin said:
i try most of them even the new one..
thing is they r stables but full off bug
video doesn't work
fm same problem;
same time it lost sdcard req reboot..
very slow; and it have a problem with file explore. i didn't show any file same time..
work well without gapp (my experience)
Click to expand...
Click to collapse
I can manage without FM
But I must have video
I hope it will be soon...

ronca79 said:
I can manage without FM
But I must have video
I hope it will be soon...
Click to expand...
Click to collapse
Bro, try this fix by MM7. Here is the link,
[PATCH] Video recording fix for CM11
Do post the result. Hope I Helped

mahithm said:
Bro, try this fix by MM7. Here is the link,
[PATCH] Video recording fix for CM11
Do post the result. Hope I Helped
Click to expand...
Click to collapse
is it for any 4.4.x cm / omni / omega release ?

ronca79 said:
is it for any 4.4.x cm / omni / omega release ?
Click to expand...
Click to collapse
Yes.

mahithm said:
Yes.
Click to expand...
Click to collapse
I'm searching this patch for few months.
The main problem is the development section and the original development section .... :crying:
Anyway... everything works great
You got already my 10x.

ronca79 said:
I'm searching this patch for few months.
The main problem is the development section and the original development section .... :crying:
Anyway... everything works great
You got already my 10x.
Click to expand...
Click to collapse
Glad I could help buddy

Unofficial Cyanogenmod 10.2 for I9100G with stagefright fix

What is this?
This a rebuild of Cyanogenmod 10.2 for I9100G where the source has been patched for the Stagefright vulnerability. The only code-wise difference: http://review.cyanogenmod.org/#/c/105496/
Build platform
CentOS Linux release 7.1.1503 (Core)
Linux polaris 3.10.0-229.11.1.el7.x86_64 #1 SMP Thu Aug 6 01:06:18 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
java-1.7.0-openjdk-1.7.0.85-2.6.1.2.el7_1.x86_64
java-1.7.0-openjdk-devel-1.7.0.85-2.6.1.2.el7_1.x86_64
Build date
8th of august 2015
Download
[md5sum] 13944c192abd11eca5ceee526bb6230a [file] cm-10.2-20150808-UNOFFICIAL-i9100g.zip [download] mirror 1 mirror 2
Please verify checksum after downloading!
Installation instructions
Via recovery & ADB
Boot to recovery, go to sideload mode and run "adb sideload cm-10.2-20150808-UNOFFICIAL-i9100g.zip"
Reboot
Via recovery
Put zipfile on sdcard on some other storage location accessible from recovery
Flash zipfile as you would any other ROM
Reboot
Note from me
I only built this release for myself to protect me from the stagefright vulnerability. I still use CM 10.2 because it works the fastest for my device.
Required notice
This software comes without any warranties and I cannot be held liable for any consequences by your use of this software. You agree to these terms when you download the software.
XDA:DevDB Information
Unofficial Cyanogenmod 10.2 for I9100G with stagefright fix, ROM for the Samsung Galaxy S II
Contributors
RedShift1
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Snapshot
Created 2015-08-09
Last Updated 2015-08-09

any information?
Screenshot?

xn0live said:
any information?
Screenshot?
Click to expand...
Click to collapse
What is this?
This a rebuild of Cyanogenmod 10.2 for I9100G where the source has been patched for the Stagefright vulnerability. The only code-wise difference: http://review.cyanogenmod.org/#/c/105496/
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2/development/rom-cyanogenmod-10-2-official-nightly-t2379850
edit:
btw, you might want to start reading the posts before you start asking questions. You spam an awful lot in my opinion. In the future I'll just report your posts, if you didn't bother to read at least the first posts and the last pages.

its 4.3 version right? have that version sod or is it only by 4.1.2

xn0live said:
its 4.3 version right? have that version sod or is it only by 4.1.2
Click to expand...
Click to collapse
Cyanogenmod 10.2 = Android 4.3.1. I haven't had any screen of death issues.

RedShift1 said:
Cyanogenmod 10.2 = Android 4.3.1. I haven't had any screen of death issues.
Click to expand...
Click to collapse
is it the same
toppits posts?
you have screenshot from scrren on ?

xn0live said:
is it the same toppits posts?
you have screenshot from scrren on ?
Click to expand...
Click to collapse
It's exactly like toppits post, no I don't have any screenshots as that's redundant anyway (plus I already customized my only I9100G, I'm not going to revert that just for you). Like I said in the topic start, this ROM is code-wise CM 10.2 aside from the stagefright fixes.

stagefright fixes
what does it mean?

xn0live said:
stagefright fixes what does it mean?
Click to expand...
Click to collapse
https://blog.zimperium.com/experts-found-a-unicorn-in-the-heart-of-android/ This build has a fix for those problems.

only 180mb? we need to flash gapps or only full wipe then flash?
and is there came at the future updates?

Can you build CM12.1 for i9100g? Please.
Thank you for dev.

dacsang97 said:
Can you build CM12.1 for i9100g? Please.
Thank you for dev.
Click to expand...
Click to collapse
I would be happy if the dev focuses more in stability in this version rather than working on more recent updates. Believe me or not, this device isn't really capable in working smoothly above KitKat anymore actually. It's just too old and weak to run smoothly on newer firmwares. You can see why I stopped my RR development, I totally lost my passion in doing it anymore. What's the point of doing it when it cant even run smoothly on it with lags time by time. If I have time, I might learn building a kernel for this build. All I want is performance and stability rather than having more recent updates but with crappy memory management and laggy UI.
Once again, thanks to the dev for this build.

Diatomix98 said:
I would be happy if the dev focuses more in stability in this version rather than working on more recent updates. Believe me or not, this device isn't really capable in working smoothly above KitKat anymore actually. It's just too old and weak to run smoothly on newer firmwares. You can see why I stopped my RR development, I totally lost my passion in doing it anymore. What's the point of doing it when it cant even run smoothly on it with lags time by time. If I have time, I might learn building a kernel for this build. All I want is performance and stability rather than having more recent updates but with crappy memory management and laggy UI.
Once again, thanks to the dev for this build.
Click to expand...
Click to collapse
You try with Mokee Nightly, it is smooth , but battery drain. I believe you can fix RR on next build. Hope . Try your best. Let's do what's best for i9100g . Thank you.

dacsang97 said:
You try with Mokee Nightly, it is smooth , but battery drain. I believe you can fix RR on next build. Hope . Try your best. Let's do what's best for i9100g . Thank you.
Click to expand...
Click to collapse
I tried, on the first 3 days, it works extremely fine. Slowly, the lag increases, yesterday it was lagging so much that I have no choice but to switch to this rom. It's not even my primary device and I got only messenger and gapps installed. Let's see how it goes. =)

Ok, i try this rom , wait kernel from you.

I don't intend on releasing any ROMs or kernels of my own. I only built this ROM so I could keep on using CM 10.2 but have the stagefright vulnerability fixed. You can get decent kernels from other topics in this forum. I may accept patches to fix other bugs or security issues but I'm not intending this to be a long-term project.

Diatomix98 said:
I tried, on the first 3 days, it works extremely fine. Slowly, the lag increases, yesterday it was lagging so much that I have no choice but to switch to this rom. It's not even my primary device and I got only messenger and gapps installed. Let's see how it goes. =)
Click to expand...
Click to collapse
I have the same problem, on both my I9100 and my I9100G. Whenever free memory drops below 100 MB, the system becomes so sluggish that it is painful to use. Freeing memory helps but fills up too fast again. I think android needs 2 GB of RAM to run properly, which our devices don't have.

New rom for our device from China
http://m.romjd.com/Rom/Detail/64860

Haha
Diatomix98 said:
I would be happy if the dev focuses more in stability in this version rather than working on more recent updates. Believe me or not, this device isn't really capable in working smoothly above KitKat anymore actually. It's just too old and weak to run smoothly on newer firmwares. You can see why I stopped my RR development, I totally lost my passion in doing it anymore. What's the point of doing it when it cant even run smoothly on it with lags time by time. If I have time, I might learn building a kernel for this build. All I want is performance and stability rather than having more recent updates but with crappy memory management and laggy UI.
Once again, thanks to the dev for this build.
Click to expand...
Click to collapse
Dude You just said the truth! ^_^

Is this odex or deodex rom?

Settings disabled Kitkat 4.4.4

HP TABLET TOUCHPAD
CYANOGENMOD INSTALLED Kitkat 4.4.4
Suddenly the settings are disabled (see below) and the WIFI is off and due to the fact that the HP is not reacting on settings button It’s impossible to do something.
com.adroid.settings
4.44-4db807a634
Size 20.8 mb
I do not have any experience how to fix this problem . Please advice

gerriton said:
HP TABLET TOUCHPAD
CYANOGENMOD INSTALLED Kitkat 4.4.4
Suddenly the settings are disabled (see below) and the WIFI is off and due to the fact that the HP is not reacting on settings button It’s impossible to do something.
com.adroid.settings
4.44-4db807a634
Size 20.8 mb
I do not have any experience how to fix this problem . Please advice
Click to expand...
Click to collapse
I have the same issue, have you managed to solve this?

Hp tablet touchpad
HarryKourt said:
I have the same issue, have you managed to solve this?
Click to expand...
Click to collapse
Hello Harry,
sorry but this issue is not solved yet but I hope that a clever person can help us.
greetings from a sunny Netherlands

Try Lineage 11 by Milaq
gerriton said:
Hello Harry,
sorry but this issue is not solved yet but I hope that a clever person can help us.
greetings from a sunny Netherlands
Click to expand...
Click to collapse
HarryKourt said:
I have the same issue, have you managed to solve this?
Click to expand...
Click to collapse
gerriton said:
HP TABLET TOUCHPAD
CYANOGENMOD INSTALLED Kitkat 4.4.4
Suddenly the settings are disabled (see below) and the WIFI is off and due to the fact that the HP is not reacting on settings button It’s impossible to do something.
com.adroid.settings
4.44-4db807a634
Size 20.8 mb
I do not have any experience how to fix this problem . Please advice
Click to expand...
Click to collapse
Hi guys sorry you're having problems do you happen to know what rom you're currently using? I'd recommend updating to the latest Lineage 11 Kitkat build by Milaq since you're having problems with an older CM rom. Do a clean install with the full guide, just stop once you've got Kitkat installed. Or just grab the recommend files if you're an experienced flashaholic. Either way a clean install will clean up most issues.
[ROM GUIDE] How to Install Android 7.1.x Nougat builds on the HP TouchPad
Download Android 4.4.4 Kitkat install files(Rom, Recovery, Gapps):
Rom:Download the latest Lineage11 build
Recovery:TWRP-jcs-dm-tenderloin-20140612b.zip
Gapps:gapps-base-arm-4.4.4-20170902-1-signed.zip

Thanks
RolandDeschain79 said:
Hi guys sorry you're having problems do you happen to know what rom you're currently using? I'd recommend updating to the latest Lineage 11 Kitkat build by Milaq since you're having problems with an older CM rom. Do a clean install with the full guide, just stop once you've got Kitkat installed. Or just grab the recommend files if you're an experienced flashaholic. Either way a clean install will clean up most issues.
[ROM GUIDE] How to Install Android 7.1.x Nougat builds on the HP TouchPad
Download Android 4.4.4 Kitkat install files(Rom, Recovery, Gapps):
Rom:Download the latest Lineage11 build
Recovery:TWRP-jcs-dm-tenderloin-20140612b.zip
Gapps:gapps-444-base-20160602-1-signed.zip
Click to expand...
Click to collapse
Hello Roland,
Thanks for your information and as soon I have the trust and after my holiday I will try this and inform you.
kind regards,
Ton

HP touchpad
Hello Harry,
Problem solved with the super help and instruction from RolandDeschain79.
I have only installed the Kitkat version because I got some problems with the Nougat.
But I try some later this week to upgrade.
greetings from The Netherlands
gerriton said:
Hello Harry,
sorry but this issue is not solved yet but I hope that a clever person can help us.
greetings from a sunny Netherlands
Click to expand...
Click to collapse