Related
Hi there,
I used http://forum.xda-developers.com/showthread.php?t=1901191 to root and install CWM recovery on my Note XXLRK.
After reboot, I had CWM 6.0.1.4.
Then I installed app I had in my old phone : rom manager. It told me to flash recovery to be able to use it, so I did it.
It flashed to version 6.0.1.2 !
I tried to flash again with root method below but recovery still to 6.0.1.2 now.
I've heard about brick risk when flashing a rom with this version.
How can I upgrade recovery back to 6.0.1.4 ?
Is it dangerous to flash a rom (cyanogen 9.1) with cwm 6.0.1.2 ?
Thanks
Seems I have no answer yet, I'm sorry I have forgotten to say it was a question !
So here new informations :
I updated with new 2.7 pack (posted by PhilZ today).
Now I have :
- CWM touch 6.0.1.4 when I start with vol up + home + power
- CWM 6.0.1.2 when i select "reboot in recovery mode" in rom manager...
This doesn't really disturb me, I just hope it will not cause problem when I'll flash to cyanogen mod 10 (I'm on stock ICS 4.0.4 right now)
If someone could confirm it will not blow up...
Thanks in advance
As far as I know, rom manager is not compatible for now, so better not use it.
Thanks for your answer.
Should I uninstall it, or can I keep it but just don't use it ?
Nui said:
Thanks for your answer.
Should I uninstall it, or can I keep it but just don't use it ?
Click to expand...
Click to collapse
You can leave it installed.
You can flash only recovery from Phillz, read last 1-2 Page of that thread
Sent from my GT-N7000 using xda premium
dr.ketan said:
You can flash only recovery from Phillz, read last 1-2 Page of that thread
Click to expand...
Click to collapse
I've just read that.
I will not use rom manager anymore, unless I am certain it does'nt make a mess.
If you like bootloops
CM derived ROMs will never run along a stock kernel. You should keep the kernel CM ROM comes with
Click to expand...
Click to collapse
I'm a bit lost with that, I really should read other tutorials, as I don't understand why I can't go from cwm + stock 4.0.4, to cm10
Dear Community, greetings.
I have a problem as wrote in the title: I can't boot into cwm recovery. I am gonna try to summarize the main points that lead me here.
Assumption
I used to install custom ROMS flawlessy, following always the instruction etc...
Last rom I've installed was CM7.2 Apocalypse, Project Silk and Link2SD
I needed to restore stock rom
I searched with Google and came across the following solutions
I searched on XDA and came across the following solutions
What I have done...
I flashed using odin 4.38 -> GB 2.3.6 2012 October 2.3.6 S5830XWKTS S5830ITVKT2 downloaded from sammobile.com
I rooted the phone with upd_1.zip (that is attached to this thread)
I tried to install recovery-clockwork-5.0.2.6-galaxyace-fix.zip
...and trying to boot into recovery pushing POWER BT + HOME BT the phone stucks on the screen with "Galaxy GT-S5830" and the top-left corner was green
What I have done #2
I tried to use S5830XXKA6 but I dind't neither managed to boot properly (wiped data/factory and cache)
Tried to flash CWM directly with Odin using "One Package"
Could you kindly help me out?:fingers-crossed: I am also willing to give you further information as you ask.
Thanks everyone for your time.:good:
F.
---- PARTIAL FIX by myself ----
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk and updated with Superuser 3.0 (attached)
4. Installed CWM 6.0.1.4
5. Restore an old backup of mine.
6. Rejoice
But your Phone is still working right ?
I mean you are able to use ur stock firmware ryt ?
Vishrut Chhajer said:
But your Phone is still working right ?
I mean you are able to you ur stock firmware ryt ?
Click to expand...
Click to collapse
First of all, thank you very much for the reply. Then, the answer is yes and no. I flashed several firmwares. Some of them did work, others don't. Right now I managed to use the one I've mentioned before and
S5830XWKT7_S5830ITVKT1_ITV
S5830XWKP6_XWKPN
but trying S5830_XXKA6 it goes in bootloop also wiping data and cache.
Further information:
I noticed a problem with CSC. While booting in standard recovery an error message appeared saying something like "can't open /system/csc/XEU/system", so I've created the whole directory path and put the files that were in /system/csc inside. This issue is fixed. I am going to investigate and let you know if with other firmware I listed above I get the same behaviour.
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
SpaceCaker said:
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
He flashed with Odin, so his recovery must have been flashed back to stock. :/
@OP, flash a "Full-package" file with Odin and see what happens
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
You could alwayd manually move recovery.img with dd commands to your partitions
But atleast you should have recovery 3e if you reflashe odin rom
Sent from my ST25i using xda app-developers app
@everyone thanks for joining the discussion!:good:
SpaceCaker said:
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
@SpaceCaker I didn't manage to find it across the web, could you kindly point me a resource, or attach it, please?
Prawesome said:
He flashed with Odin, so his recovery must have been flashed back to stock. :/
@OP, flash a "Full-package" file with Odin and see what happens
Click to expand...
Click to collapse
@Prawesome I tried with several all-in-one package (S5830XWKT7 I yet said, and...):
S5830XWKS2_S5830XENKS1_S5830XWKS2_HOME.tar.md5
I also tried to root with upd_1.zip (and did it successefully) and after to updating the xbin/su to the latest version 3.3.1 flawlessy, too.
But... (keep reading)
SpaceCaker said:
You could alwayd manually move recovery.img with dd commands to your partitions
Click to expand...
Click to collapse
@SpaceCaker I don't know how to do it. Could you explain, please?
SpaceCaker said:
But atleast you should have recovery 3e if you reflashe odin rom
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
@SpaceCaker I have the standard Samsung Recovery 3e, complaying about csc and its location (that I could fixed as I said above).
Right know I've also tried to flash cwm 4.0.0.9 without any success. Always stucked to GT-S-5830-www.samsung.etc... screen
Let me know if you want more infos.
Thanks,
F.
Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
Fandonius said:
@everyone thanks for joining the discussion!:good:
@SpaceCaker I didn't manage to find it across the web, could you kindly point me a resource, or attach it, please?
@Prawesome I tried with several all-in-one package (S5830XWKT7 I yet said, and...):
S5830XWKS2_S5830XENKS1_S5830XWKS2_HOME.tar.md5
I also tried to root with upd_1.zip (and did it successefully) and after to updating the xbin/su to the latest version 3.3.1 flawlessy, too.
But... (keep reading)
@SpaceCaker I don't know how to do it. Could you explain, please?
@SpaceCaker I have the standard Samsung Recovery 3e, complaying about csc and its location (that I could fixed as I said above).
Right know I've also tried to flash cwm 4.0.0.9 without any success. Always stucked to GT-S-5830-www.samsung.etc... screen
Let me know if you want more infos.
Thanks,
F.
Click to expand...
Click to collapse
The 3e recovery also complains about csc on stock rom
Even on froyo
Will upload the cwm5 i used
Sent from my ST25i using xda app-developers app
SpaceCaker said:
The 3e recovery also complains about csc on stock rom
Even on froyo
Will upload the cwm5 i used
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Thanks, could you please upload the firmware you used, too?
Ok some little news:
I managed to flash CWM 6.0.1.8, tried to restore some of my old nand backup (also having mismatch and tricking it emptying the nandroid.md5) but had problems with linked partition sd-ext.
Obtained this error
make_extf4fs /block/mmcblk0p2
Click to expand...
Click to collapse
So tried to wipe/format, but after it stuck on boot.
Still waiting for the cwm 5.0.2.4. Can someone post it?
Thanks
So, thanks for your help . I managed to solve it by myself.
And here's how:
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk (attached)
4. Installed CWM 6.0.1.5
5. Restore an old backup of mine.
6. Rejoice
Fandonius said:
So, thanks for your help . I managed to solve it by myself.
And here's how:
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk (attached)
4. Installed CWM 6.0.1.5
5. Restore an old backup of mine.
6. Rejoice
Click to expand...
Click to collapse
6.0.1.5 it's bugged. So I am trying to get back to 5.0.2.6 but still being stucked on the Galaxy Ace Logo.
Fandonius said:
6.0.1.5 it's bugged. So I am trying to get back to 5.0.2.6 but still being stucked on the Galaxy Ace Logo.
Click to expand...
Click to collapse
Get in odin and flash cwm5 odin flashable version u can in dev thread
Sent from my GT-S5830 using xda app-developers app
R: [PARTIALLY-SOLVED] Galaxy Ace S5830 - Can't boot into cwm recovery
SnowPluralism said:
Get in odin and flash cwm5 odin flashable version u can in dev thread
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Thanks for joining the discussion!
I've tried but got stuck to the boot screen with galaxy ace logo and green corner. Could someone tell me where to look to get more info? I mean log, or test I can do... It's so strange I can only flash 6.0.1.5.
Fandonius said:
Thanks for joining the discussion!
I've tried but got stuck to the boot screen with galaxy ace logo and green corner. Could someone tell me where to look to get more info? I mean log, or test I can do... It's so strange I can only flash 6.0.1.5.
Click to expand...
Click to collapse
Leave cwm 6 ....flash stock rom via download mode and then flash cwm 5!
Sent from my GT-S5830 using xda app-developers app
I tried with no success. Please let me know how to give you more information if you need.
Thanks for your answering.
I got the same problem, I googled and a link lead me to here.
I try to flash PX Recovery, but the result is same, stuck on boot logo.
Fandonius said:
I tried with no success. Please let me know how to give you more information if you need.
Thanks for your answering.
Click to expand...
Click to collapse
If u already flashed cwm with rom manager theres nothing u can do about it!
Sent from my GT-I9300 using XDA Premium HD app
Try flashing this:
CWM 5.0.2.6. FIX
When your system reboot, wait until Android boot again, install TERMINAL EMULATOR's app and type this commands:
Code:
su
reboot recovery
After you've done it, your device'll reboot into recovery mode automatically
Viper The Ripper said:
Try flashing this:
CWM 5.0.2.6. FIX
When your system reboot, wait until Android boot again, install TERMINAL EMULATOR's app and type this commands:
Code:
su
reboot recovery
After you've done it, your device'll reboot into recovery mode automatically
Click to expand...
Click to collapse
Tried and doesn't work. Still stuck on boot logo
Hey guys, a noob reporting here. I recently rooted my phone using @Shaaan 's method, thanks a lot bro.
Now I want to install this: http://forum.xda-developers.com/showthread.php?t=1873119
I want to do it without increasing the binary counter. What the hell is DD? or Terminal?
Is this a software or an app, or would I have to install Linux to use Terminal
Help Mee..
areeb47 said:
Hey guys, a noob reporting here. I recently rooted my phone using @Shaaan 's method, thanks a lot bro.
Now I want to install this: http://forum.xda-developers.com/showthread.php?t=1873119
I want to do it without increasing the binary counter. What the hell is DD? or Terminal?
Is this a software or an app, or would I have to install Linux to use Terminal
Help Mee..
Click to expand...
Click to collapse
search google play for 'terminal' and pick one you like
I am using 'Terminal IDE' but there are many others to chose from ;]
dd is command to type inside that terminal - you can use this:
Code:
$ su
# dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15
# reboot
that is mentioned in that thread from within terminal on your cell - not necessarily from adb shell on your pc (reboot might not work - in that case just reboot using power button as usual ;p)
I did it exactly same procedure installing ThunderZap on JB from inside cell using terminal app.
Other option you might want to try is to use Universal Kernel Flasher by frapeti (here on xda or on google play)
Oh god I flashed that using PC, and after it rebooted, it is stuck on the Galaxy S Advance splash screen. how long am I supposed to wait.
areeb47 said:
Oh god I flashed that using PC, and after it rebooted, it is stuck on the Galaxy S Advance splash screen. how long am I supposed to wait.
Click to expand...
Click to collapse
bootloop.
go into recovery mode (vol up + home + power) and clear cache / dalvik.
if no go try download mode and re-flash whole firmware with odin.
You flashed a Gingerbread kernel over the Jelly Bean?
R_a_z_v_a_n said:
You flashed a Gingerbread kernel over the Jelly Bean?
Click to expand...
Click to collapse
Ohh f***, that was really stupid of me, I really didn't pay attention to the Gingerbread part written in the post title..
Well luckily I was able to boot into download mode and I flashed the DDULP8 firmware.
Now please tell me a recovery that will work on this firmware. Very much appreciated.
areeb47 said:
Ohh f***, that was really stupid of me, I really didn't pay attention to the Gingerbread part written in the post title..
Well luckily I was able to boot into download mode and I flashed the DDULP8 firmware.
Now please tell me a recovery that will work on this firmware. Very much appreciated.
Click to expand...
Click to collapse
Flash a custom kernel like Cocore-E kernel and you will also have a custom recovery depending on the one you choose (CWM or TWRP) to download
Sent from my GT-I9070 using xda premium
areeb47 said:
Ohh f***, that was really stupid of me, I really didn't pay attention to the Gingerbread part written in the post title..
Well luckily I was able to boot into download mode and I flashed the DDULP8 firmware.
Now please tell me a recovery that will work on this firmware. Very much appreciated.
Click to expand...
Click to collapse
Download CoCore kernel after rooting your phone..with it ,you will get your custom recovery..
http://forum.xda-developers.com/showthread.php?t=2140597
Sent from my GT-I9070 using xda premium
This CoCore contains TWRP or CWM?
and will flashing that increase my binary counter?
Both version. Choose what you want from Cocafe thread.
R_a_z_v_a_n said:
Both version. Choose what you want from Cocafe thread.
Click to expand...
Click to collapse
Thanks added bro. Ok I have decided to go with the CWM version.
One more problem, when I type adb shell and then type adb devices, it shows list of devices attached but the list is empyt even though my phone is connected and usb debugging is enabled? What do I need to do?
Do I need to go to stock recovery and select install from adb?
See this screenshot please.
All done, installed it successfully.
Can I install GALAXPERIA over DDULP8 firmware?
This is just the compilation of the work of several Seniors Members and Contributors Recognized in this forum.
I simply change some lines so that we have the files that I present.
Only Install via Custom Recovery (CWMR or TWRP) for those who want to try one or the other recovery
Thanks, Credits and Cheers to Them.
@turl1 CWMR
@rickwyatt CWMR version Black
@Hazou TWRP and CWMR 6.0.3.6
@HSD-Pilot Script Boot.img (This one I adapted)
Downloads
Recovery CWMR Black.zip
Recovery CWMR Gray.zip
Recovery TWRP 2.6.0.0.zip Note: Work slow but very fine
Recovery TWRP 2.6.1.1.zip New Note: The Recovery for Installation by Omar Rom No work for me, for you, maybe
Recovery CWMR 6.0.3.6.zip New
Greetings and Luck and sorry for my bad English
Note: I am not responsible for what happens to your phone by using these files, I've tried and I have worked on my two phones Razr I
To see the changes, at the end of any recovery flash, search and select, in the menu of your recovery -> reboot in recovery
This restart the phone in recovery you just flash
jacbarahona72 said:
This is just the compilation of the work of several Seniors Members and Contributors Recognized in this forum.
I simply change some lines so that we have the files that I present.
Only Install via Custom Recovery (CWMR or TWRP) for those who want to try one or the other recovery
Thanks, Credits and Cheers to Them.
@turl1 CWMR
@rickwyatt CWMR version Black
@Hazou TWRP
@HSD-Pilot Script Boot.img (This one I adapted)
Downloads
Recovery CWMR Black.zip
Recovery CWMR Gray.zip
Recovery TWRP 2.6.zip
Greetings and Luck and sorry for my bad English
Note: I am not responsible for what happens to your phone by using these files, I've tried and I have worked on my two phones Razr I
Click to expand...
Click to collapse
if i flash twrp it will automatically remove CWMR?
That's
paulle said:
if i flash twrp it will automatically remove CWMR?
Click to expand...
Click to collapse
That's octopus ..... I've tried installing the one above the other, without problem
Greetings and good luck and sorry for my bad English
jacbarahona72 said:
That's octopus ..... I've tried installing the one above the other, without problem
Greetings and good luck and sorry for my bad English
Click to expand...
Click to collapse
tried it and worked fine! muchas gracias
Thanks ever so much for the creation and sharing of these recovery zips.
Most appreciated
Does this fixes the lag issue (on both CWM and TWRP)?
No, won't fix the lag in the recoveries.
Sent from my GT-P5110 using XDA Premium HD app
Will the lag ever be fixed ?
Sent from my XT890 using xda premium
Maybe, maybe not. We know that a kernelthread (kworker) is using constantly around 40% of the cpu. But we can't find the cause of that or just stop it.
Sent from my GT-P5110 using XDA Premium HD app
Hazou said:
Maybe, maybe not. We know that a kernelthread (kworker) is using constantly around 40% of the cpu. But we can't find the cause of that or just stop it.
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
Who is developing CWM ? I would test Beta versions if needed
twrp
jacbarahona72 said:
This is just the compilation of the work of several Seniors Members and Contributors Recognized in this forum.
I simply change some lines so that we have the files that I present.
Only Install via Custom Recovery (CWMR or TWRP) for those who want to try one or the other recovery
Thanks, Credits and Cheers to Them.
@turl1 CWMR
@rickwyatt CWMR version Black
@Hazou TWRP
@HSD-Pilot Script Boot.img (This one I adapted)
Downloads
Recovery CWMR Black.zip
Recovery CWMR Gray.zip
Recovery TWRP 2.6.zip
Greetings and Luck and sorry for my bad English
Note: I am not responsible for what happens to your phone by using these files, I've tried and I have worked on my two phones Razr I
To see the changes, at the end of any recovery flash, search and select, in the menu of your recovery -> reboot in recovery
This restart the phone in recovery you just flash
Click to expand...
Click to collapse
will you update your twrp-zip to v2.61 ?
paulle said:
will you update your twrp-zip to v2.61 ?
Click to expand...
Click to collapse
Link to 2.61?
Not yet available, will update twrp soon for our device
Sent from my GT-P5110 using XDA Premium HD app
paulle said:
will you update your twrp-zip to v2.61 ?
Click to expand...
Click to collapse
Octopus read the first post, I am not developer
Edit: Update thanks @Hazou
Enviado desde mi XT890 usando Tapatalk 4
Nice work!
Sent from my XT890 using XDA Premium 4 mobile app
To fix 2.6.1.1 twrp installation issues go to updater-script and delete the format system line, and format it in twrp among with the wipes
Updated the CWM.
The problem u have with twrp2.6.1.1. i cant reproduce it. Even with the file downloaded from this xda and flashed on my friends razr i.
Can u try it one more time and make sure u got the right one I would apreciate it!
Hi
I can not flash Omars Rom with CWMR 6.0.3.6
It gets stuck after ~ 3 seconds.
Did a Power Button + Vol Down Reboot and flashed CWMR Black back.
This recovery could flash the same .zip file without problem.
greetings
Killigrew said:
Hi
I can not flash Omars Rom with CWMR 6.0.3.6
It gets stuck after ~ 3 seconds.
Did a Power Button + Vol Down Reboot and flashed CWMR Black back.
This recovery could flash the same .zip file without problem.
greetings
Click to expand...
Click to collapse
As I said in the 1st post ..... I do not serve, for example TWRP 2.6.1.1 .... yet others if
I use TWRP 2.6.0.0 .....
Note: CWMR black and "Standar or Gray" version and TWRP 2.6.0.0, we serve all
Hi guys
i have a little problem need help plz
every time i try to flash my phone with CyanogenMod 7.2 rom my phone gets bootlop !!!:crying:
i know how to flash roms to my phone its not my first time but why gets bricked idk why !!
-----
started from stock ROM
1- first i flashed the kernel Version 3.0 with CWM
2- then i Wipe Data, Cache and Dalvik ....no problem
3- change it to... Mount System
4-and Flash CM 7.2 rom & Google apps
-5 reboot ......
Boom phone get bricked !!!
so what am missing here ..... any idea
thx in in advance & sry 4 my english
Please post it on Discussion CM7.2 and CM9.1 thread and don't spamming or just post it on Q&A section. Keep section clean.
Sent from my GT-S5830i using xda app-developers app
^
|
Please follow that next time
Format your system too after wiping.
Sent from my desk
NeymarJR11 said:
Please post it on Discussion CM7.2 and CM9.1 thread and don't spamming or just post it on Q&A section. Keep section clean.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
oky man sry my mistake x(
------------
@Android-fany
Ok bro thx you i will try it & report it here if it works or not
hope its works
LEON_HEART said:
oky man sry my mistake x(
------------
@Android-fany
Ok bro thx you i will try it & report it here if it works or not
hope its works
Click to expand...
Click to collapse
OK. But next time don't spamming everything and keep section always clean.
Regards,
Syah(NeymarJR11)
Nope its Not working bro .... the phone bricked again :crying:
hope anyone know why its not working plz help
LEON_HEART said:
Nope its Not working bro .... the phone bricked again :crying:
hope anyone know why its not working plz help
Click to expand...
Click to collapse
Aww, man. Try this instruction. "HERE How to INSTALL CM7.2"
NeymarJR11 said:
Aww, man. Try this instruction. "HERE How to INSTALL CM7.2"
Click to expand...
Click to collapse
Thx you bro very much ... i already did that ... that why i don't know whats wrong cuz i do every step same as the video , i even download it to watch it carefully but still my phone bricked :crying:
3- change it to... Mount System
Click to expand...
Click to collapse
In order to mount all, it should say unmount and not otherway round.
Sent from my GT-S5830i using xda app-developers app
rj_85 said:
In order to mount all, it should say unmount and not otherway round.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
mmm ya i tried that too bro i thought maybe its cuz my phone to bootlop ...
so i flash everything & set it to (( unmount System )) ... reboot --> bricked !!
again this time set it ... (( Mount System )) ... reboot --> bricked !
------
u mean bro i should set everything just like this pic ؟؟؟؟
LEON_HEART said:
mmm ya i tried that too bro i thought maybe its cuz my phone to bootlop ...
so i flash everything & set it to (( unmount System )) ... reboot --> bricked !!
again this time set it ... (( Mount System )) ... reboot --> bricked !
------
u mean bro i should set everything just like this pic ؟؟؟؟
Click to expand...
Click to collapse
Yes. Is that your picture?
Sent from my GT-S5830i
Envy-X said:
Yes. Is that your picture?
Sent from my GT-S5830i
Click to expand...
Click to collapse
i only tried to unmount System not everything
oky then i will try & hope its works this time thx man
-------
about pic nope its form abhi922 thread thx 2 him
nope its not working , the phone bricked again
set everything like the pic .... even i format the system after wiping still no hope....
Okay follow this.
- First flash stock Rom and kernel in odin.
- Go to stock recovery and flash cwm.
- In cwm flash biel's kernel.
- Still in cwm, wipe data, wipe cache, wipe dilvik cache, format data, format system.
- go to mounts and storage and mount everything. So it looks like "unmount/system unmount/data etc"
- after mounting it all flash the Rom.
- after flash don't exit recovery. Mount everything again and flash the Rom again. (you should still be in the temporary cwm. Not biel's kernels cwm.)
- now reboot and wait 5 minutes.
- if it doesn't boot, then hold power button for 5 seconds so it reboots.
- Again wait 5 minutes.
- if it still won't boot then i have no idea.
Sent from my GT-S5830i
Envy-X said:
Okay follow this.
- First flash stock Rom and kernel in odin.
- Go to stock recovery and flash cwm.
- In cwm flash biel's kernel.
- Still in cwm, wipe data, wipe cache, wipe dilvik cache, format data, format system.
- go to mounts and storage and mount everything. So it looks like "unmount/system unmount/data etc"
- after mounting it all flash the Rom.
- after flash don't exit recovery. Mount everything again and flash the Rom again. (you should still be in the temporary cwm. Not biel's kernels cwm.)
- now reboot and wait 5 minutes.
- if it doesn't boot, then hold power button for 5 seconds so it reboots.
- Again wait 5 minutes.
- if it still won't boot then i have no idea.
Sent from my GT-S5830i
Click to expand...
Click to collapse
thx you bro thx very much
i do every step you write it but when i try to flash it again its say error "" error mount/system "" so i reboot it ---> bricked again :crying:
OH GOD its finally works :laugh:
after 12 times of flashing with odin & cwm its finally works :victory:
just after my phone got bootlop ...I mount everything & flash the rom again !!!
@Envy-X @rj_85 @NeymarJR11 @Android-fany
thx you guys thx very very much :victory:
LEON_HEART said:
mmm ya i tried that too bro i thought maybe its cuz my phone to bootlop ...
so i flash everything & set it to (( unmount System )) ... reboot --> bricked !!
again this time set it ... (( Mount System )) ... reboot --> bricked !
------
u mean bro i should set everything just like this pic ؟؟؟؟
Click to expand...
Click to collapse
And do you root your phone? If don't root, you can't install any rom or custom kernel.
Sent from my GT-S5830i using xda app-developers app
---------- Post added at 10:39 AM ---------- Previous post was at 10:33 AM ----------
LEON_HEART said:
OH GOD its finally works :laugh:
after 12 times of flashing with odin & cwm its finally works :victory:
just after my phone got bootlop ...I mount everything & flash the rom again !!!
@Envy-X @rj_85 @NeymarJR11 @Android-fany
thx you guys thx very very much :victory:
Click to expand...
Click to collapse
Already works? Wow, congratulation! Finally you did it with carefully.
Sent from my GT-S5830i using xda app-developers app
NeymarJR11 said:
And do you root your phone? If don't root, you can't install any rom or custom kernel.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Root is not necessary. Recovery has already Root
Sent from my desk
Android-fany said:
Root is not necessary. Recovery has already Root
Sent from my desk
Click to expand...
Click to collapse
Ohh ok! I never heard that before. Now, I know.
I do it so
Flash stock rom via odin and "wipe data/factory reset" on STOCK recorvery
Then follow steps
0. And of course remember, you need 50% or more battery!!!!!
1. Go to ClockWorkRecorveryMode
2. Wipe data, cache and dalvik cache
3. Mount system
4. Flash bieltv.3 lastest kernel
5. Go to advanced--> reboot recorvery
6. Flash CM 7.2 RC 4
7.Mount system
8. Flash Gapps
9. Reboot
10. Wait untill phone boots
That alway work on me