Hi guys,
Looking at my phone closely I see that the left side is close together with the chassis but on the right side there is more separation and not close together. What I mean is the black surrounding the screen.
Is this normal?
Enviado desde mi C6603 usando Tapatalk 2
rttnpig] said:
Hi guys,
Looking at my phone closely I see that the left side is close together with the chassis but on the right side there is more separation and not close together. What I mean is the black surrounding the screen.
Is this normal?
Enviado desde mi C6603 usando Tapatalk 2
Click to expand...
Click to collapse
it s not normal go to sony
Problem is, I've seen many photos of Xperia Z and all have the right side separated from chasis. Anyone else got this?
Enviado desde mi C6603 usando Tapatalk 2
rttnpig] said:
Problem is, I've seen many photos of Xperia Z and all have the right side separated from chasis. Anyone else got this?
Enviado desde mi C6603 usando Tapatalk 2
Click to expand...
Click to collapse
can u take pic of ur phone or send that u saw on sites?
This is what I mean. I just want to know if all are like this. Seen several like this.
Basically left is close to the chasis but right is not even close.
Enviado desde mi C6603 usando Tapatalk 2
rttnpig] said:
This is what I mean. I just want to know if all are like this. Seen several like this.
Basically left is close to the chasis but right is not even close.
Enviado desde mi C6603 usando Tapatalk 2
Click to expand...
Click to collapse
No
the glass is fixed properly on mine
x102x96x said:
No
the glass is fixed properly on mine
Click to expand...
Click to collapse
Thanks, let's wait for other people's comments.
Enviado desde mi C6603 usando Tapatalk 2
Mine is like that as well. I remember reading a while back that quite a few people have experienced this where one side has a reasonable gap. You could try getting it swapped?
C1emen7s said:
Mine is like that as well. I remember reading a while back that quite a few people have experienced this where one side has a reasonable gap. You could try getting it swapped?
Click to expand...
Click to collapse
I've contacted Sony, let's see what they say.
Enviado desde mi C6603 usando Tapatalk 2
Just realised mine is like this too, only a tiny bit on the top right corner. I wouldn't have even noticed if I didn't see this thread, but doesnt bother me too much - or would it cause probelms etc? Bit annoying that Sony always seem to have something wrong with 50% of their phones & then the other 50% is fine =/
Anyone else?
Screen protector
SalamiQueen said:
Just realised mine is like this too, only a tiny bit on the top right corner. I wouldn't have even noticed if I didn't see this thread, but doesnt bother me too much - or would it cause probelms etc? Bit annoying that Sony always seem to have something wrong with 50% of their phones & then the other 50% is fine =/
Click to expand...
Click to collapse
it is not the glass, it is the shatterproof screen protector that is glued onto the glass
oldevil666 said:
it is not the glass, it is the shatterproof screen protector that is glued onto the glass
Click to expand...
Click to collapse
What? I never mentioned anything about the glass??& I can clearly see the shatterproof protector is nowehere connected to the edge
Ive contacted them, they told me to go to the shop. Will let you guys know!
Anyone else???
Out of curiosity, what manufacturer is your screen? Refer to this thread for how to check. http://forum.xda-developers.com/showthread.php?t=2182432&highlight=screen+manufacturer
Mine is from Sharp and appears to be 100% perfectly symetrical
I'm getting my mobile replaced. The guy on the shop never seen a z like this.
I'm not root and I don't feel like doing experiments, I'm going to send the phone next week.
Enviado desde mi C6603 usando Tapatalk 2
The top right part on mine seemed to be like this, but after a closer inspection it seems only the shatterproof film is not fitted edge to edge. The glass panel itself seems to be ok.
The gaps on all sides of my phone look equal in width.
rttnpig] said:
I'm getting my mobile replaced. The guy on the shop never seen a z like this.
I'm not root and I don't feel like doing experiments, I'm going to send the phone next week.
Enviado desde mi C6603 usando Tapatalk 2
Click to expand...
Click to collapse
You don't need to root to see what display you have. Go to page 21 in the thread listed above. There's an app a guy has made you can download that shows you.
C1emen7s said:
You don't need to root to see what display you have. Go to page 21 in the thread listed above. There's an app a guy has made you can download that shows you.
Click to expand...
Click to collapse
Thanks!
Enviado desde mi C6603 usando Tapatalk 2
Related
Looking at my phone I realised that the button was not centered. Basically the button moves to the left and to the right when you help it with your finger. Anyone else realised?
Enviado desde mi C6603 usando Tapatalk 2
Yes, that's normal. The button "rotates" a little in every XZ, that's how it's built.
Akiainavas said:
Yes, that's normal. The button "rotates" a little in every XZ, that's how it's built.
Click to expand...
Click to collapse
Alright, thanks!:thumbup:
Enviado desde mi C6603 usando Tapatalk 2
rttnpig] said:
Alright, thanks!:thumbup:
Enviado desde mi C6603 usando Tapatalk 2
Click to expand...
Click to collapse
Instead of saying thanks, hit the thanks button, it's there for a reason:highfive::silly:
Hi guys.
I'm sending my phone back as it is faulty. I would like to know the experience of those that rmad the phone. Did you get another faulty phone? What are the problems?
I'm a bit worried of dead pixels.
Enviado desde mi C6603 usando Tapatalk 2
Hi
How are you guys? I'm having a very frustrating problem my Xperia z is going with black screen when I want to hang up the call the screen stays black and it doesn't respond to the power key, the only I can do is to force shutdown the phone using power button plus volume up, or if the other person hangs up it becomes again the screen to...
There seems to be a problem with the sensor or something like,could be the screen protector I bought? It is a slim glass but is more thick than the classical film.. Or maybe there is other issue, hope can you help me sorting this thing out
Thanks
Regards
Enviado desde mi C6602 usando Tapatalk 2
I would bet against the sensor... You can check it with some App to know if it is working properly.
Sent from my C6603 using Tapatalk 2
But if it's the sensor why it recognises when I put my ear to dark the screen? If was that the phone must remain with the screen active or I'm wrong??
Thanks for the answer
Enviado desde mi C6602 usando Tapatalk 2
Factory reset??
Sent from my C6602 using xda premium
I just realized that the LCD screen protector of sgp glass is the problem since in their webpage the people that are using it are currently having the same problem as me...
Now I'm using a shake app to hang up calls hehe
Enviado desde mi C6602 usando Tapatalk 2
Hello everyone!
I found something interesting with the fingerprint sensor today, so I thought I share it.
I held the phone upside down swiped down with my registered fingers and they got recognised!
All the fingers I registered got recognised.
Not only that it recognised much better!
So I re-registered all my prints while the phone is held upside down, so when in correct orientation, the fingers will be recognised even better!
So much happier. Love my Note 4. [emoji16]
Sent from my SM-N910C using Tapatalk
I like the way a device which we paid a lot makes us turn upside down to work as it should. You should not be happy about it IMHO ☺ though I can count meself happy owning this device, I regret not getting an ip6 from time to time.
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
Very useful tip. Kudos langslang ?
Sent from my SM-N910T using Tapatalk
beypazari said:
I like the way a device which we paid a lot makes us turn upside down to work as it should. You should not be happy about it IMHO ☺ though I can count meself happy owning this device, I regret not getting an ip6 from time to time.
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Ip6? Booooo. With 5.1.1 hopefully our beast phone can be a beast again! From the looks of Russian 5.1.1 review (YouTube) it doesn't have any new features apart from performance improvement. But still good!
Sent from my SM-N910C using Tapatalk
That's interesting I'm gonna test that on my N910C.
Lol. This actually works. U can swipe pretty quick and it still registers! Wtf! Lol. But this is pretty neat discovery. Basically u just hold the phone upsidedown while u register fingers. Thats only one timr thing.
Then u can use it normally when u unlock.
Thanks for this thread. Very helpful.
I've been a, "it always works for me" person when people complain about the fingerprint scanner. I didn't thought it was people not doing it right.
I just tried this and, wow! It really does make it better. I barely even had to touch the scanner with my finger.
Guys, did you try to use a non-registered finger when unlocking? lol just a thought
muamers said:
Guys, did you try to use a non-registered finger when unlocking? lol just a thought
Click to expand...
Click to collapse
I have all of my 8 fingers and 2 thumbs registered. So cannot try that for you. [emoji12]
Sent from my SM-N910C using Tapatalk
langsalang said:
I have all of my 8 fingers and 2 thumbs registered. So cannot try that for you. [emoji12]
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
lol
I can't see any improvement by contrary...
Trimis de pe al meu SM-N910C folosind Tapatalk
Hey guys what are your thoughts on this? The phone didn't drop or anything like that
I've had the dead spot for about a year. It sucks. I just deal with it.
No ghost touches, though.
I had touchscreen problems and got a new phone on insurance
Sent from my VS980 4G using Tapatalk
Just replace the acreen is not that complicated, i replaced mine twice
Enviado desde mi VS980 4G mediante Tapatalk
Well at least I'm not the only one? neodunker, is there an online guide to replacing the screen that you used?
compuser84 said:
Well at least I'm not the only one? neodunker, is there an online guide to replacing the screen that you used?
Click to expand...
Click to collapse
Which method you used to root 5.0.2?