HI, i´ve search, but just want to confirm if is there any other option, to revive my ace.
I´ve uptdate tne mobile with kies, at middle it stoped, and just display " donload" at the scren , after the error on kies, it power off and boot only to blank screen, nothing more.
Using the " jigKik" , it will whork?
Many thx.
Samsung Ace s5830
Just see if you are able to go to the DOWNLOAD MODE.
If you can then you can easily flash your firmware through ODIN
When the phone is off, press Home + Power + Volume Down and hold.
If 'downloading' appears, you can flash a stock ROM and revive your ace.
Sent from my pet - Megatron™
i think you are not bricked.try dl mode and never update with kies!!
Sent from Ace on JB (4.2.2)
n0p3zz said:
i think you are not bricked.try dl mode and never update with kies!!
Sent from Ace on JB (4.2.2)
Click to expand...
Click to collapse
Thanx, for the help, i do not no if i´m in download mode,because the screen is blank, but the pc recgnozies the phone,in odin it is recgonize, but when try to flash, it does not pass the setup connection, i´m using the OPS-cooperv1.0.
His there any way to revive it??
Many thx
http://www.youtube.com/watch?v=dMVP2IDk2sU
Watch this video and you will flash stock rom..
Sent from Ace on JB(4.2.2)
Try a newer version of Odin if your odin in outdated
Many thx for the help, but no way, the video and the odin don´t work.
The video have the link´s broken,can not get the OPS file.
The odin i´ve tried :
-odin multi downloader v4.38
-Odin Multi Downloader v4.42
The problem is the same, do not pass the setup connection...
Maybe is the OPS file??
I´m desperate, the phone was perfect , try to update and lost the phone
Thx for all the help.
Just to make sure, did you get the yellow "downloading...." word on screen before using the Odin. Because you say the phone is blank when using the Odin.
hanzalah83 said:
Just to make sure, did you get the yellow "downloading...." word on screen before using the Odin. Because you say the phone is blank when using the Odin.
Click to expand...
Click to collapse
Hi, i get that yellow word, using kies, but just the yellow WORD, never tried before the other boot´s, like download,that have a exclamation point or recovery.
is there a way to inject on the phone a new system??
Thx
HI, i´ve tried diferent firmwares, but no luck.
Can anyone please tell me if is there a way to revival my phone??
In Odin, it stuck in « setup connction»
Tried odin 4.38, 4.42
Dorflatino said:
HI, i´ve tried diferent firmwares, but no luck.
Can anyone please tell me if is there a way to revival my phone??
In Odin, it stuck in « setup connction»
Tried odin 4.38, 4.42
Click to expand...
Click to collapse
Have you closed all kies.exe processes? I read somewhere that you can unplug and re-plug the usb when it stuck on "setup connection", but I'm not sure 'cause I didn't tried.
I think he is bricked i have a gem10312bk 9.7tablet and i managed to get cwm on it without a computer i installed a rom and then gapps and then a compatability zip and wen i went to reboot it went blank.i have no computer but took it to a mate whos been flashing and romming all his phones and tablets for some time and he said ur bricked i was gutted yet iv rommedy ace 20 times and not eva had a problem lol so we all learn dont we.im soz for u as i no how i felt just four days ago wen i had it happen to me
HI, is there a way to inject a new boot??
Thx
Wot model is it ?
pete19761 said:
Wot model is it ?
Click to expand...
Click to collapse
Hi, is galaxy ace s5830, thx
Using odin reflash usb drivers and stock rom(samsung will have it) or u can find a thread on utube called bricked samsung galaxy ace and he haas all the threds u need but dont use kies its unreliable and its known to bootloop ur phonealso known as soft brick.if u hold power and the button below ur screen at the same time do u get factory settings?if u do then ur not bricked i can help there to like if this helped
pete19761 said:
Using odin reflash usb drivers and stock rom(samsung will have it) or u can find a thread on utube called bricked samsung galaxy ace and he haas all the threds u need but dont use kies its unreliable and its known to bootloop ur phonealso known as soft brick.if u hold power and the button below ur screen at the same time do u get factory settings?if u do then ur not bricked i can help there to like if this helped
Click to expand...
Click to collapse
Hi, thx, but the problem is that the screen just stay black,
- with the power+up+home, pressed, pc detect it and in odin stuck in «setup connection»
- with power and home, just black screen, pc do not detect
Today after tried several combinations, i did get the phone connect to pc but with the screen off, tried odin, but stuck in the same place.
Thx for all the help.
Dont press up and home and power just home and power mite take five to ten secs and must b timed perfect plus which drive ov ur computer did it detect it in u mite have to change exe paths with drive c or d or whicheva drivers ur using
---------- Post added at 07:45 PM ---------- Previous post was at 07:42 PM ----------
And did u install detect samsung usb drivers programme in ur computer.it specifically for samsung
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Also u can use force connection if u didnt no lol theres threads on here bout that
pete19761 said:
Dont press up and home and power just home and power mite take five to ten secs and must b timed perfect plus which drive ov ur computer did it detect it in u mite have to change exe paths with drive c or d or whicheva drivers ur using
---------- Post added at 07:45 PM ---------- Previous post was at 07:42 PM ----------
And did u install detect samsung usb drivers programme in ur computer.it specifically for samsung
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Also u can use force connection if u didnt no lol theres threads on here bout that
Click to expand...
Click to collapse
The drivers i have are the ones from kies, and it connects without any problem..
Related
I accidentally bricked my galaxy tab when I try to install Overcome Ware and I accidentally unplug the usb cable in the middle of the progress. I cannot boot into downloading mode no matter how hard I try. My tab only show a phone icon, an exclamation mark and a pc. Does my tab brick forever or what? Can you help me out. I'm very appreciate your help. Thank you so much for reading my thread.
That mode is also one type of download mode. Flash a stock rom like roto jmi with repartition.
i was DL new ROM to and my pc died and brickedmy P1000 and i can only see the phone ! PC sign if i have it plugged into electricity and ODIN doesnt recognize it if i plug it in to intall official 2.3.3.
what should i do?
I bricked my tab while flashing many times.
Try this:
1. Turn off your Tab then turn on.
2. Run Odin and connect to PC (Odin will not recognise it but its OK).
3. Just install the .PIT file (It'll be installed).
4. Your Tab will restart and you'll see "SAMSUNG".
5. Now goto download mode and install PDA,CSC or whatever else you want.
Done !
omr911 said:
I bricked my tab while flashing many times.
Try this:
1. Turn off your Tab then turn on.
2. Run Odin and connect to PC (Odin will not recognise it but its OK).
3. Just install the .PIT file (It'll be installed).
4. Your Tab will restart and you'll see "SAMSUNG".
5. Now goto download mode and install PDA,CSC or whatever else you want.
Done !
Click to expand...
Click to collapse
Thanks for your instruction ! You saved my life
help pls..from asia Kuala Lumpur
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
if you can't boot into download mode, chuck your tab into the rubbish bin or use it as a paperweight. its a perma brick, nuff said.
agentz said:
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
Click to expand...
Click to collapse
Plug it in the mains and let it sit there for a day... Then try again.
I wonder how come ppl 'unplug-by-accident'... Ever heard of concentration, awareness etc ... ?
agentz said:
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
Click to expand...
Click to collapse
If u have warranty,claim it at Sammy service center telling them nothing about ur flashing business.
If not,read these threads and try one by one.
http://forum.xda-developers.com/showthread.php?t=1133590
http://forum.xda-developers.com/showthread.php?t=1127978
http://forum.xda-developers.com/showthread.php?t=1214955
If nothing works,still try sammy service center.[Ur tab is worth of that service cost, isn't it?]
@IcedCube
What u told could have been told in a gentler way,couldn't it?
It seems that u have acquired ur Tab only yesterday and here u r giving ur "Valuable 2 cents" at a newbie.
BTW, our tab cannot be Hard bricked that easily and even PC-triangle-Device screen as well as a Blank screen also r Download modes for our Tab.
After a bad/stupid ODIN flash my tab now only shows the "Samsung galaxy tab" for 1 sec and turns of again.
I do think i some how i flash a wrong ROM to the device.
And to make things even more bad, my volume down button do NOT work.
So i guess my only solution is a RIFF JTAG solution... anyone here had success with this solution ??
unubtanium said:
After a bad/stupid ODIN flash my tab now only shows the "Samsung galaxy tab" for 1 sec and turns of again.
I do think i some how i flash a wrong ROM to the device.
And to make things even more bad, my volume down button do NOT work.
So i guess my only solution is a RIFF JTAG solution... anyone here had success with this solution ??
Click to expand...
Click to collapse
If it still fires up, no need for that. Just start Odin, plug in the Tab and start it up. If Odin recognises it, you're on the safe side. But first get the Overcome GB-restock v5 and have it ready for a new 'blind' flash.
dirlan2001 said:
If it still fires up, no need for that. Just start Odin, plug in the Tab and start it up. If Odin recognises it, you're on the safe side. But first get the Overcome GB-restock v5 and have it ready for a new 'blind' flash.
Click to expand...
Click to collapse
Overcome GB-restock v5 have been downloaded and ready for flashing.
But i am very sure that my TAB is hardbricked, because it ONLY shows the samsung logo for max 1 sec and the turnes off. And as mentioned my volume down button do NOT work
And i have tried to have it connected to the pc with ODIN up and running while i turn it on for that second but odin do not see it and it is off again before you can blink...
So JTAG service is the solution i think.. Just wish there was someone in London that did that.
unubtanium said:
Overcome GB-restock v5 have been downloaded and ready for flashing.
But i am very sure that my TAB is hardbricked, because it ONLY shows the samsung logo for max 1 sec and the turnes off. And as mentioned my volume down button do NOT work
And i have tried to have it connected to the pc with ODIN up and running while i turn it on for that second but odin do not see it and it is off again before you can blink...
So JTAG service is the solution i think.. Just wish there was someone in London that did that.
Click to expand...
Click to collapse
Hmmm, weird... as long as the Samsung logo appears it's not bricked. Maybe the Google SDK can help then. It's including very basic ADB support, which should give you a way to connect the PC and your phone.
If not, sorry and good luck
dirlan2001 said:
Hmmm, weird... as long as the Samsung logo appears it's not bricked. Maybe the Google SDK can help then. It's including very basic ADB support, which should give you a way to connect the PC and your phone.
If not, sorry and good luck
Click to expand...
Click to collapse
Thanks for the help and now i will go out on the big world wide web and see if can learn about Google SDK and basic ADB support..
And when that is done lets hope it will be on long enough to receive and execute an command like this one: adb reboot download or something like that..
If no go there i will send it it of for JTAG
Damn stupid read and write Dyslexia, i did not see the differers before the flash was done!"!!!%£$£$%£
GT-I9000_NEE_1_20110311161226
GT-P1000_NEE_1_20110618152048
As you can see P1 and I9 are being flipped but still did think it was p1000 i flashed damn it... Anyway, there is always JTAG if adb do not work. and i am not holding my breath for for it because it has software for a I9000 on it and not a P1000
---------- Post added at 12:29 PM ---------- Previous post was at 11:49 AM ----------
Mkay learning done:
And it all points to JTAG.
Because adb do not find the device, and i think that is becuase it turns it selv off verry quickly.
Command:
C:\Program Files\Android\android-sdk\platform-tools>adb reboot download
error: device not found
---------- Post added at 12:56 PM ---------- Previous post was at 12:29 PM ----------
I found this over at http://forum.xda-developers.com/showthread.php?t=819551 :
If the phone's bootloader is still intact, that is you see at least the white Galaxy S/Samsung/AT&T logo or the "PC ! Phone" logo on the screen, you should be able to force it into download mode by connecting a homemade jig that simulates the Samsung "Anyway" field test jig. You can make this jig using a micro USB plug and a resistor.
And as mentiond i do see the Galaxy TAB samsung logo for 1/2 secound and it turns it self off. So is this conformation that my bootloader is intact?? If so HOW the BLIPP do i get my tab into download mode withoud my volum down button...
unubtanium said:
Damn stupid read and write Dyslexia, i did not see the differers before the flash was done!"!!!%£$£$%£
GT-I9000_NEE_1_20110311161226
GT-P1000_NEE_1_20110618152048
As you can see P1 and I9 are being flipped but still did think it was p1000 i flashed damn it... Anyway, there is always JTAG if adb do not work. and i am not holding my breath for for it because it has software for a I9000 on it and not a P1000
---------- Post added at 12:29 PM ---------- Previous post was at 11:49 AM ----------
---------- Post added at 12:56 PM ---------- Previous post was at 12:29 PM ----------
I found this over at http://forum.xda-developers.com/showthread.php?t=819551 :
If the phone's bootloader is still intact, that is you see at least the white Galaxy S/Samsung/AT&T logo or the "PC ! Phone" logo on the screen, you should be able to force it into download mode by connecting a homemade jig that simulates the Samsung "Anyway" field test jig. You can make this jig using a micro USB plug and a resistor.
And as mentiond i do see the Galaxy TAB samsung logo for 1/2 secound and it turns it self off. So is this conformation that my bootloader is intact?? If so HOW the BLIPP do i get my tab into download mode withoud my volum down button...
Click to expand...
Click to collapse
As I said before as long as there's a lifeform on screen, it's still not bricked. Anyway, the method described to build a 'fix' also means you don't need buttons to press. The problem for the Tab will be to find an USB-to-microUSB adapter that will plug into the Tab's cable. Once that hurdle taken, you'll be in Download mode and on your way to Odin's Wizardry...
Cheers,
dirlan2001 said:
As I said before as long as there's a lifeform on screen, it's still not bricked. Anyway, the method described to build a 'fix' also means you don't need buttons to press. The problem for the Tab will be to find an USB-to-microUSB adapter that will plug into the Tab's cable. Once that hurdle taken, you'll be in Download mode and on your way to Odin's Wizardry...
Cheers,
Click to expand...
Click to collapse
Thanks for pounding in to my head that it is not bricked and that there are a chance to get it in to download mode... Now i am going to make this usb thing happen..
"i Have Odin ready with all the files selected and ready to push tha button"
My Galaxy tab (Korean Made) GT P1000 "GOON TOO SOON"
Hello;
I used Odin to mistakenly flashed my Samsung galaxy tab GT1000 with wrong firmware; I end-up with black screen no boot. Odin was able to detect the device after 3 times; after the third flash Odin can not detect the device any more. all efforts proved abortive in other to connect the device back. If I power the device it will show flash light and on with no display on the screen after 5 seconds the light will off but the device will still ON with blank screen I can not get my device to download mode even if I try to it will still power up in blank screen. so please what is your advice on this mess?
Thanks.
nuti1025 said:
I accidentally bricked my galaxy tab when I try to install Overcome Ware and I accidentally unplug the usb cable in the middle of the progress. I cannot boot into downloading mode no matter how hard I try. My tab only show a phone icon, an exclamation mark and a pc. Does my tab brick forever or what? Can you help me out. I'm very appreciate your help. Thank you so much for reading my thread.
Click to expand...
Click to collapse
Connect the usb, HOLD VOLUME UP + DOWN , then hold POWER BUTTON for 5 secs ... Let it reboot to recovery. Reboot the phone.. And reflash -_- ...I've done this many times, but not sure if it works to u
I installed Clock Work Mod on my Samsung Galaxy Mini and after that, I selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
I don't know if this is the right section. Thanks.
Up. Help me.
neilgoco said:
I installed Clock Work Mod on my Samsung Galaxy Mini and after that, I selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
I don't know if this is the right section. Thanks.
Click to expand...
Click to collapse
Sometime the phone discharges have u tried starting op in 'download mode' while charging and reinstalling Froyo again using Odin?
Yesterday I have received my sgm mobile and i had exactly the same problem with the same aplication. The mobile seems to be dead it is not detected by the pc and can't be charged. Can anybody help us ?
i have same problem with my mini today, i upgraded to 2.34 because of wi-fi, it won't connect and everything was allright.
then i downgraded to 2.2 wih 2.33 ops and odin 4.38, but then my phone it doesn't even turn on. i mean no recovery mode, no downloading mode, nothing. it don't turn on at all and odin don't detect. what to do?
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
debsattam said:
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
Click to expand...
Click to collapse
Can you post a link to that specific video? Thanks.
debsattam said:
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
Click to expand...
Click to collapse
By the way, is the USB Jig for SGS the same size with the USB slot of the Galaxy Mini? Does the USB Jig works on Galaxy Mini? Is this tried and tested on this pgone? Sorry for too many questions. Thanks.
---
I am here: http://maps.google.com/maps?ll=14.728119,121.029307
Go a google search with "unbricking galaxy s jig"
It can be use for xperia mini too.
Gudluck!
It might be,battery suddenly empty. Its hard for phone to brick.Charge ur phone 1st at full... And choose the right baseband according rom prequistid. I b4 this rooted and installing CWM on this galaxy mini and the phone at samsung logo or samsung galaxy mini logo.
As on my condition,follow guide that been explained. If u have flashed the CWM, REBOOT. Then at samsung logo,press volume down,then u can access CWM. To avoid other probs, flash it with cyanogen mod. Or it maybe cant be loaded.
As far i concerned, for galaxy mini got 2 type of recovery. That is,
Enchanced recovery
&
Tass Recovery
For me,choose tass recovery.
Sent from my HTC Vision with Doubleshot Rom
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Did I get some of the previous posts about using usb jigs for SGS on samsung galaxy GT S 5570 right??
What software is required?
Some USB jigs for SGS 900XX (as in 9000i 9003i etc) are available on line for between INR 250 to 600 (1 U$D is approx 49 INR).
arsalanahmed said:
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Click to expand...
Click to collapse
Step 1-4 done,
but my Odin doesn't detect it..
Should I go to jig mode?
The best thing is to give it to the service center
I agree, I should have made it
armanke13 said:
Step 1-4 done,
but my Odin doesn't detect it..
Should I go to jig mode?
Click to expand...
Click to collapse
My odin detects the phone, report a new succesful update...
...but the phone is still not booting up - the logo do not appear !!
(battery is hot, something is going on...)
stepph said:
My odin detects the phone, report a new succesful update...
...but the phone is still not booting up - the logo do not appear !!
(battery is hot, something is going on...)
Click to expand...
Click to collapse
cud be the firmware u used or somethin?
roofrider said:
cud be the firmware u used or somethin?
Click to expand...
Click to collapse
tried two official for my region from 'checks fus downloader'...
stepph said:
tried two official for my region from 'checks fus downloader'...
Click to expand...
Click to collapse
not sure abt fusdownloader...but almost every1 here use firmwares frm samfirmware.com
and no1 had any prob.
roofrider said:
not sure abt fusdownloader...but almost every1 here use firmwares frm samfirmware.com
and no1 had any prob.
Click to expand...
Click to collapse
i'm behind a firwall and cannot acces... i'll try tonite from home...
and let you know...
Not working....
arsalanahmed said:
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Click to expand...
Click to collapse
Dear Arsalan,
I face same problem with my galaxy mini and try to use your procedure for ON my galaxy mini but I not successful please help me.
I have Bricked my i9001 I downloaded from Samfirmware but in the process it get stuck in cache.img.ext4 download.... now my phone is soft bricked ... how can i unbrick my phone.. i need help pls...
what is firmware version that you download?
don't worry ,you need to download new fw xxkg3 or other and flash again
if you can goto download mode brick can solve
Sent from my LG-P970 using XDA App
somboons said:
what is firmware version that you download?
don't worry ,you need to download new fw xxkg3 or other and flash again
if you can goto download mode brick can solve
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
Thanks i downloaded I9001JPKF7 because thats for my phone i used Odin 4.43 that is included in the package.. can you send me a link for that new xxkg3 and will it work on my phone? and yes i can still go to download mode... i reflushed with the same package but same problem occurs stuck at 8/12... please help
it is so easy to slove .
but I do not kown hou to use the English expression it
http://hotfile.com/dl/128748780/08bced0/I9001XXKG3_I9001XXKG3_I9001PRTKH1.rar.html
Sent from my LG-P970 using XDA App
thanks.. ill download and flash it.. ill give my feedback later.... thanks guys...
---------- Post added at 10:00 AM ---------- Previous post was at 09:48 AM ----------
what odin version should i use and where to put this .tar file? pls help.. i want to unbrick my phone...thanks in advance...
---------- Post added at 10:40 AM ---------- Previous post was at 10:00 AM ----------
I Finally Got it... Thanks...
I just get cofused because Odin 4.43 says that the .tar file i loaded in PDA is invalid. I just ignored it and click Start.. then now it ok..
now its I9001XXKG3 but firmware still 2.3.3 i thought it was 2.3.4.. but its ok.. as long as i can use my phone again... Thanks guys..
why I cant connect to wifi after flushing?
if you have ANY problem with booting/running your samsung phone, just reflash ROM:
a)bring phone in Download mode again (Turn it with pressing HOME+VOLUME DOWN+POWER buttons )
b) if you get display with showing image: computer connected to phone with broken cable, JUST simply connect it again to PC (better to another usb port) and run ODIN again!
that's my experience with SG3 and SGS+
so.. i have my samsung gsplus in downloading mode, what now???
it's like 10 minuts now
ow and now i even don't get it in download mode anymore.
Have the phone-pc logo.
odin won't connect..
can someone pleaze help me???
take out the battery
wait like 2-3 min
insert it again
boot into download mode and flash a stock rom via odin
ok phone is now in dowload mode again.
Won't set up a connection in odin :s
error: cannot open the usb serial port. code: 5
EDIT: ow that was becouse KIES was open.
Now it almost started bus ODIN freezes :s
try another usb port
or another computer
wauw haha thank you, just another usb port did the job
how easy
can any body help my phone gone to dead....after i flash kernel speedmod k2 16 its go to dead...when i try to on its no respond....whyyy....i cant go to download mod or recovery mod help plz
well there is no speedmod k2 16 kernel for our device
so you flashed a kernel for an other device thats the reason why your phone got bricked
never flash a kernel which is built for an other device !!!!
You Flashed a Kernel for SGS, so that was predictable. Perhaps you can get into download mode through USB-JIG (just use search)
crybert said:
You Flashed a Kernel for SGS, so that was predictable. Perhaps you can get into download mode through USB-JIG (just use search)
Click to expand...
Click to collapse
there anything i can do to wake up it back...i dont have usb jig now...i have order a sub jig for sg s2...can it be use
---------- Post added at 08:23 AM ---------- Previous post was at 08:16 AM ----------
now what should i do to take back a phone ....
anyone help me
Hold volume down+power button+home buttom. It will go into downloading mode in a few seconds now...
Than flash a rom with odin.
Sent from my GT-I9001 using Tapatalk
i'm trying to install clockwork mode in to my samsung galaxy pop plus . .
but my phone is not detecting in odin mode
please help me to fix ma problem
abzzy.shox said:
i'm trying to install clockwork mode in to my samsung galaxy pop plus . .
but my phone is not detecting in odin mode
please help me to fix ma problem
Click to expand...
Click to collapse
Do you have your phone restarted in download mode? (turn your phone off and restart it by holding volume down, home and power button at the same time)
Do you have the Samsung drivers installed? (i can't post links yet but if you search for "Samsung Galaxy Mini USB drivers" on Google you'll find it, if you don't, just download Kies, the drivers are included)
maybe because it's a different handset?
lonestrider said:
maybe because it's a different handset?
Click to expand...
Click to collapse
It really isn't, it's the same S5570 with a Qualcomm MSM 7227 as the Mini.
Same everything else too.
Even if it wasn't, Odin wouldn't care, it'd detect it anyway. Odin will let you flash anything even remotely compatible, that is why you have to be careful about what you flash, you will get no warnings and you can mess up and brick your phone.
I just restored a Mini flashed to a Fit rom using Odin for both the mistake and the fix.
If you use cwm of galaxy mini on galaxy mini plus it may brick your phone..as both are different...
Swyped from my first Android device....!
- Make sure you have kies or samsung usb driver
- Make sure your usb cable is working
- Make sure your usb port is not damaged (working)
- Make sure your odin is virus-free
- Open odin
- Boot your device to download mode ( volume key down + home + power key )
- Connect to your PC
That should do it...
Hope it helped...
Sent from my GT-S5570 using xda premium
Naaa.. it doesn't help a bit .. the real problem is, odin cannot detect the phone, alredy installed all the driver, test the cable, test the connection .. you name it everything, still not success... Or, maybe odin did not support Galaxy Pop Plus ? ( S5570i )
i wish it'll help !!
Download this program to your PC and install it then open Odin and connect your mobile via usb--->>I wish it'll help!!!: rolleyes:
tulun said:
Naaa.. it doesn't help a bit .. the real problem is, odin cannot detect the phone, alredy installed all the driver, test the cable, test the connection .. you name it everything, still not success... Or, maybe odin did not support Galaxy Pop Plus ? ( S5570i )
Click to expand...
Click to collapse
So, you actually have the yellow triangle and the yellow text below it that says "downloading..." and when connected to your PC you get a notification of how it's connected but Odin won't recognize it?
Well, that's just not possible, it really isn't possible.
Just get some WD40 into the connector, retry and you should be fine, yes my friends, sometimes the best solution is in the garage.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
ujnikm said:
Download this program to your PC and install it then open Odin and connect your mobile via usb--->>I wish it'll help!!!: rolleyes:
Click to expand...
Click to collapse
That program is awesome!
I assume you meant to send the samsung drivers, i'd search for them and repost the link but i'm not the one with the problem.
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
tulun said:
Naaa.. it doesn't help a bit .. the real problem is, odin cannot detect the phone, alredy installed all the driver, test the cable, test the connection .. you name it everything, still not success... Or, maybe odin did not support Galaxy Pop Plus ? ( S5570i )
Click to expand...
Click to collapse
Odin most definetly supports galaxy pop plus, it's the same as any mini but with a newer core, the rest is absolutely the exact same, i have even reviewed the chip codings.
If Odin doesn't recognize it, Kies won't either because both use the exact same method, Odin being a leaked Samsung application and all.
Try better when you're trolling, because this is just daft.
The Galaxy Pop Plus sports 832MHz over 600mhz
Thanks, A Still Small Voice Of GRATITUDE
abzzy.shox said:
i'm trying to install clockwork mode in to my samsung galaxy pop plus . .
but my phone is not detecting in odin mode
please help me to fix ma problem
Click to expand...
Click to collapse
Download kies worked for me
install rom manager then choose flash CWM
xenv1 said:
install rom manager then choose flash CWM
Click to expand...
Click to collapse
hope it won't brick the phone just like a lot of people with minis who brick their's coz of ROM manager..
No CWM
Actually, there is no permanent CWM in galaxy pop plus or sgy which you can flash through odin.
Instead, you can root it and flash temporary CWM from stock recovery. If you want permanent CWM, flash a kernel which has it built in like cyanus.
Link to cyanus kernel: http://forum.xda-developers.com/showthread.php?t=2110367
Pop plus not similar to mini
The galaxy pop plus is not similar in hardware to galaxy mini. It is more similar to galaxy y s5360 in hardware except for camera quality. sgy roms work for pop plus, but galaxy mini roms brick pop plus
aftr flashing from sd a wrong rooting file i cant boot my s5830 anymore,lcd is blinking on and off everytime i turn it on,i cant get into recovery mode when pressd home+on buttons even after flashin several times in odin still having the same problem and when plugged into pc no charging animation occurs..need some answers pls,any help will b much appreciated.
albirth said:
aftr flashing from sd a wrong rooting file i cant boot my s5830 anymore,lcd is blinking on and off everytime i turn it on,i cant get into recovery mode when pressd home+on buttons even after flashin several times in odin still having the same problem and when plugged into pc no charging animation occurs..need some answers pls,any help will b much appreciated.
Click to expand...
Click to collapse
I think you have the same problem as me dude. Mine was bricked form installing wrong recovery.
http://forum.xda-developers.com/showthread.php?t=2142412
The answer to mine is service centre or jtag (find local phone repair shop if still not in warranty)
Lets hope you have some luck.
---------- Post added at 11:01 PM ---------- Previous post was at 10:55 PM ----------
Can you see DOWNLOAD on the screen when in download mode?
[email protected] said:
Can you see DOWNLOAD on the screen when in download mode?
Click to expand...
Click to collapse
yep,i can goto download mode with the yellow "Downloading" and still get to PASS it in odin when flashed several times but when it reboots aftr flashing it goes into its blinking on-off loop all over again.
Try this from the thread i mentioned.
Try this Odin & cooper:-
http://db.tt/jgXJcjzG
Not my work. All thanks go to Galaxy_Rohit if it works for you. Good luck.
[email protected] said:
Try this from the thread i mentioned.
Try this Odin & cooper:-
http://db.tt/jgXJcjzG
Not my work. All thanks go to Galaxy_Rohit if it works for you. Good luck.
Click to expand...
Click to collapse
This is my dropbox folder.
Rom: Xperion v4.2
Gildan said:
This is my dropbox folder.
Rom: Xperion v4.2
Click to expand...
Click to collapse
Sorry dude.
All thanks to Gildan then if it works lol.
albirth said:
aftr flashing from sd a wrong rooting file i cant boot my s5830 anymore,lcd is blinking on and off everytime i turn it on,i cant get into recovery mode when pressd home+on buttons even after flashin several times in odin still having the same problem and when plugged into pc no charging animation occurs..need some answers pls,any help will b much appreciated.
Click to expand...
Click to collapse
[email protected] said:
I think you have the same problem as me dude. Mine was bricked form installing wrong recovery.
http://forum.xda-developers.com/showthread.php?t=2142412
The answer to mine is service centre or jtag (find local phone repair shop if still not in warranty)
Lets hope you have some luck.
---------- Post added at 11:01 PM ---------- Previous post was at 10:55 PM ----------
Can you see DOWNLOAD on the screen when in download mode?
Click to expand...
Click to collapse
This is solution to both ur problems .... download and install Samsung USB drivers on ur PC
Then go to download mode
Now ur Odin will detect ur device
Flash stock rom via Odin
Y do u want to go to service center when its so simple :what::what:
Ubuntu themed launcher...! click here
________________________________________
"lts not who u r inside, its wat u do that defines u..."
———–——————————————
--->make ur phone faster and more battery efficient
--->partition and link apps to sd?!?!?
--->cool 3d games for galaxy y (no root no lag)
Coz it costs pretty much. So, try it to repair yourself or go, better buy a new phone than giving it to center.
Sent Via XDA™ Premium
sanny5 said:
This is solution to both ur problems .... download and install Samsung USB drivers on ur PC
Then go to download mode
Now ur Odin will detect ur device
Flash stock rom via Odin
Y do u want to go to service center when its so simple :what::what:
Ubuntu themed launcher...! click here
________________________________________
"lts not who u r inside, its wat u do that defines u..."
———–——————————————
--->make ur phone faster and more battery efficient
--->partition and link apps to sd?!?!?
--->cool 3d games for galaxy y (no root no lag)
Click to expand...
Click to collapse
I can get odin to see the phone but it does not show on the screen "Download" so i think it is hardbricked. If i could see it on screen i am sure it would work but no. Tried in windows 8/7 and xp 32bit and x64. No joy. I went to phone shop he quoted me £30.
Sorry Bro!! Its nothing more you can do now...
Sent Via XDA™ Premium
I had installed by mistake the S5570 oficial firmware on my ace and i resolved like this:
1º Remove batery, sim card and sdcard
2º Conected to computer
3º At same time use the 3 buttons to enter in downloading mode and put the battery ( you need to ask for help because u cant do this alone)
4º Install your desire firmware by odin
PS: Sorry for my bad english