Database Develop

My galaxy tab is bricked and cannot boot in download mode no matter what

I accidentally bricked my galaxy tab when I try to install Overcome Ware and I accidentally unplug the usb cable in the middle of the progress. I cannot boot into downloading mode no matter how hard I try. My tab only show a phone icon, an exclamation mark and a pc. Does my tab brick forever or what? Can you help me out. I'm very appreciate your help. Thank you so much for reading my thread.

That mode is also one type of download mode. Flash a stock rom like roto jmi with repartition.

i was DL new ROM to and my pc died and brickedmy P1000 and i can only see the phone ! PC sign if i have it plugged into electricity and ODIN doesnt recognize it if i plug it in to intall official 2.3.3.
what should i do?

I bricked my tab while flashing many times.
Try this:
1. Turn off your Tab then turn on.
2. Run Odin and connect to PC (Odin will not recognise it but its OK).
3. Just install the .PIT file (It'll be installed).
4. Your Tab will restart and you'll see "SAMSUNG".
5. Now goto download mode and install PDA,CSC or whatever else you want.
Done !

omr911 said:
I bricked my tab while flashing many times.
Try this:
1. Turn off your Tab then turn on.
2. Run Odin and connect to PC (Odin will not recognise it but its OK).
3. Just install the .PIT file (It'll be installed).
4. Your Tab will restart and you'll see "SAMSUNG".
5. Now goto download mode and install PDA,CSC or whatever else you want.
Done !
Click to expand...
Click to collapse
Thanks for your instruction ! You saved my life

help pls..from asia Kuala Lumpur
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help

if you can't boot into download mode, chuck your tab into the rubbish bin or use it as a paperweight. its a perma brick, nuff said.

agentz said:
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
Click to expand...
Click to collapse
Plug it in the mains and let it sit there for a day... Then try again.
I wonder how come ppl 'unplug-by-accident'... Ever heard of concentration, awareness etc ... ?

agentz said:
I accidentally bricked my galaxy tab P1000 when I try to install 3.2 frimware and I accidentally unplug the usb cable in the middle of the progress. Now I cannot turn ON/DL Mode/Recovery Mode no matter how hard I try.it only black like no battery. pls help
Click to expand...
Click to collapse
If u have warranty,claim it at Sammy service center telling them nothing about ur flashing business.
If not,read these threads and try one by one.
http://forum.xda-developers.com/showthread.php?t=1133590
http://forum.xda-developers.com/showthread.php?t=1127978
http://forum.xda-developers.com/showthread.php?t=1214955
If nothing works,still try sammy service center.[Ur tab is worth of that service cost, isn't it?]
@IcedCube
What u told could have been told in a gentler way,couldn't it?
It seems that u have acquired ur Tab only yesterday and here u r giving ur "Valuable 2 cents" at a newbie.
BTW, our tab cannot be Hard bricked that easily and even PC-triangle-Device screen as well as a Blank screen also r Download modes for our Tab.

After a bad/stupid ODIN flash my tab now only shows the "Samsung galaxy tab" for 1 sec and turns of again.
I do think i some how i flash a wrong ROM to the device.
And to make things even more bad, my volume down button do NOT work.
So i guess my only solution is a RIFF JTAG solution... anyone here had success with this solution ??

unubtanium said:
After a bad/stupid ODIN flash my tab now only shows the "Samsung galaxy tab" for 1 sec and turns of again.
I do think i some how i flash a wrong ROM to the device.
And to make things even more bad, my volume down button do NOT work.
So i guess my only solution is a RIFF JTAG solution... anyone here had success with this solution ??
Click to expand...
Click to collapse
If it still fires up, no need for that. Just start Odin, plug in the Tab and start it up. If Odin recognises it, you're on the safe side. But first get the Overcome GB-restock v5 and have it ready for a new 'blind' flash.

dirlan2001 said:
If it still fires up, no need for that. Just start Odin, plug in the Tab and start it up. If Odin recognises it, you're on the safe side. But first get the Overcome GB-restock v5 and have it ready for a new 'blind' flash.
Click to expand...
Click to collapse
Overcome GB-restock v5 have been downloaded and ready for flashing.
But i am very sure that my TAB is hardbricked, because it ONLY shows the samsung logo for max 1 sec and the turnes off. And as mentioned my volume down button do NOT work
And i have tried to have it connected to the pc with ODIN up and running while i turn it on for that second but odin do not see it and it is off again before you can blink...
So JTAG service is the solution i think.. Just wish there was someone in London that did that.

unubtanium said:
Overcome GB-restock v5 have been downloaded and ready for flashing.
But i am very sure that my TAB is hardbricked, because it ONLY shows the samsung logo for max 1 sec and the turnes off. And as mentioned my volume down button do NOT work
And i have tried to have it connected to the pc with ODIN up and running while i turn it on for that second but odin do not see it and it is off again before you can blink...
So JTAG service is the solution i think.. Just wish there was someone in London that did that.
Click to expand...
Click to collapse
Hmmm, weird... as long as the Samsung logo appears it's not bricked. Maybe the Google SDK can help then. It's including very basic ADB support, which should give you a way to connect the PC and your phone.
If not, sorry and good luck

dirlan2001 said:
Hmmm, weird... as long as the Samsung logo appears it's not bricked. Maybe the Google SDK can help then. It's including very basic ADB support, which should give you a way to connect the PC and your phone.
If not, sorry and good luck
Click to expand...
Click to collapse
Thanks for the help and now i will go out on the big world wide web and see if can learn about Google SDK and basic ADB support..
And when that is done lets hope it will be on long enough to receive and execute an command like this one: adb reboot download or something like that..
If no go there i will send it it of for JTAG
Damn stupid read and write Dyslexia, i did not see the differers before the flash was done!"!!!%£$£$%£
GT-I9000_NEE_1_20110311161226
GT-P1000_NEE_1_20110618152048
As you can see P1 and I9 are being flipped but still did think it was p1000 i flashed damn it... Anyway, there is always JTAG if adb do not work. and i am not holding my breath for for it because it has software for a I9000 on it and not a P1000
---------- Post added at 12:29 PM ---------- Previous post was at 11:49 AM ----------
Mkay learning done:
And it all points to JTAG.
Because adb do not find the device, and i think that is becuase it turns it selv off verry quickly.
Command:
C:\Program Files\Android\android-sdk\platform-tools>adb reboot download
error: device not found
---------- Post added at 12:56 PM ---------- Previous post was at 12:29 PM ----------
I found this over at http://forum.xda-developers.com/showthread.php?t=819551 :
If the phone's bootloader is still intact, that is you see at least the white Galaxy S/Samsung/AT&T logo or the "PC ! Phone" logo on the screen, you should be able to force it into download mode by connecting a homemade jig that simulates the Samsung "Anyway" field test jig. You can make this jig using a micro USB plug and a resistor.
And as mentiond i do see the Galaxy TAB samsung logo for 1/2 secound and it turns it self off. So is this conformation that my bootloader is intact?? If so HOW the BLIPP do i get my tab into download mode withoud my volum down button...

unubtanium said:
Damn stupid read and write Dyslexia, i did not see the differers before the flash was done!"!!!%£$£$%£
GT-I9000_NEE_1_20110311161226
GT-P1000_NEE_1_20110618152048
As you can see P1 and I9 are being flipped but still did think it was p1000 i flashed damn it... Anyway, there is always JTAG if adb do not work. and i am not holding my breath for for it because it has software for a I9000 on it and not a P1000
---------- Post added at 12:29 PM ---------- Previous post was at 11:49 AM ----------
---------- Post added at 12:56 PM ---------- Previous post was at 12:29 PM ----------
I found this over at http://forum.xda-developers.com/showthread.php?t=819551 :
If the phone's bootloader is still intact, that is you see at least the white Galaxy S/Samsung/AT&T logo or the "PC ! Phone" logo on the screen, you should be able to force it into download mode by connecting a homemade jig that simulates the Samsung "Anyway" field test jig. You can make this jig using a micro USB plug and a resistor.
And as mentiond i do see the Galaxy TAB samsung logo for 1/2 secound and it turns it self off. So is this conformation that my bootloader is intact?? If so HOW the BLIPP do i get my tab into download mode withoud my volum down button...
Click to expand...
Click to collapse
As I said before as long as there's a lifeform on screen, it's still not bricked. Anyway, the method described to build a 'fix' also means you don't need buttons to press. The problem for the Tab will be to find an USB-to-microUSB adapter that will plug into the Tab's cable. Once that hurdle taken, you'll be in Download mode and on your way to Odin's Wizardry...
Cheers,

dirlan2001 said:
As I said before as long as there's a lifeform on screen, it's still not bricked. Anyway, the method described to build a 'fix' also means you don't need buttons to press. The problem for the Tab will be to find an USB-to-microUSB adapter that will plug into the Tab's cable. Once that hurdle taken, you'll be in Download mode and on your way to Odin's Wizardry...
Cheers,
Click to expand...
Click to collapse
Thanks for pounding in to my head that it is not bricked and that there are a chance to get it in to download mode... Now i am going to make this usb thing happen..
"i Have Odin ready with all the files selected and ready to push tha button"

My Galaxy tab (Korean Made) GT P1000 "GOON TOO SOON"
Hello;
I used Odin to mistakenly flashed my Samsung galaxy tab GT1000 with wrong firmware; I end-up with black screen no boot. Odin was able to detect the device after 3 times; after the third flash Odin can not detect the device any more. all efforts proved abortive in other to connect the device back. If I power the device it will show flash light and on with no display on the screen after 5 seconds the light will off but the device will still ON with blank screen I can not get my device to download mode even if I try to it will still power up in blank screen. so please what is your advice on this mess?
Thanks.

nuti1025 said:
I accidentally bricked my galaxy tab when I try to install Overcome Ware and I accidentally unplug the usb cable in the middle of the progress. I cannot boot into downloading mode no matter how hard I try. My tab only show a phone icon, an exclamation mark and a pc. Does my tab brick forever or what? Can you help me out. I'm very appreciate your help. Thank you so much for reading my thread.
Click to expand...
Click to collapse
Connect the usb, HOLD VOLUME UP + DOWN , then hold POWER BUTTON for 5 secs ... Let it reboot to recovery. Reboot the phone.. And reflash -_- ...I've done this many times, but not sure if it works to u

[Q] Samsung Galaxy Mini BRICKED (HELP!)

I installed Clock Work Mod on my Samsung Galaxy Mini and after that, I selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
I don't know if this is the right section. Thanks.

Up. Help me.

neilgoco said:
I installed Clock Work Mod on my Samsung Galaxy Mini and after that, I selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
I don't know if this is the right section. Thanks.
Click to expand...
Click to collapse
Sometime the phone discharges have u tried starting op in 'download mode' while charging and reinstalling Froyo again using Odin?

Yesterday I have received my sgm mobile and i had exactly the same problem with the same aplication. The mobile seems to be dead it is not detected by the pc and can't be charged. Can anybody help us ?

i have same problem with my mini today, i upgraded to 2.34 because of wi-fi, it won't connect and everything was allright.
then i downgraded to 2.2 wih 2.33 ops and odin 4.38, but then my phone it doesn't even turn on. i mean no recovery mode, no downloading mode, nothing. it don't turn on at all and odin don't detect. what to do?

hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones

debsattam said:
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
Click to expand...
Click to collapse
Can you post a link to that specific video? Thanks.

debsattam said:
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
Click to expand...
Click to collapse
By the way, is the USB Jig for SGS the same size with the USB slot of the Galaxy Mini? Does the USB Jig works on Galaxy Mini? Is this tried and tested on this pgone? Sorry for too many questions. Thanks.
---
I am here: http://maps.google.com/maps?ll=14.728119,121.029307

Go a google search with "unbricking galaxy s jig"
It can be use for xperia mini too.
Gudluck!
It might be,battery suddenly empty. Its hard for phone to brick.Charge ur phone 1st at full... And choose the right baseband according rom prequistid. I b4 this rooted and installing CWM on this galaxy mini and the phone at samsung logo or samsung galaxy mini logo.
As on my condition,follow guide that been explained. If u have flashed the CWM, REBOOT. Then at samsung logo,press volume down,then u can access CWM. To avoid other probs, flash it with cyanogen mod. Or it maybe cant be loaded.
As far i concerned, for galaxy mini got 2 type of recovery. That is,
Enchanced recovery
&
Tass Recovery
For me,choose tass recovery.
Sent from my HTC Vision with Doubleshot Rom

(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works

Did I get some of the previous posts about using usb jigs for SGS on samsung galaxy GT S 5570 right??
What software is required?
Some USB jigs for SGS 900XX (as in 9000i 9003i etc) are available on line for between INR 250 to 600 (1 U$D is approx 49 INR).

arsalanahmed said:
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Click to expand...
Click to collapse
Step 1-4 done,
but my Odin doesn't detect it..
Should I go to jig mode?

The best thing is to give it to the service center

I agree, I should have made ​​it

armanke13 said:
Step 1-4 done,
but my Odin doesn't detect it..
Should I go to jig mode?
Click to expand...
Click to collapse
My odin detects the phone, report a new succesful update...
...but the phone is still not booting up - the logo do not appear !!
(battery is hot, something is going on...)

stepph said:
My odin detects the phone, report a new succesful update...
...but the phone is still not booting up - the logo do not appear !!
(battery is hot, something is going on...)
Click to expand...
Click to collapse
cud be the firmware u used or somethin?

roofrider said:
cud be the firmware u used or somethin?
Click to expand...
Click to collapse
tried two official for my region from 'checks fus downloader'...

stepph said:
tried two official for my region from 'checks fus downloader'...
Click to expand...
Click to collapse
not sure abt fusdownloader...but almost every1 here use firmwares frm samfirmware.com
and no1 had any prob.

roofrider said:
not sure abt fusdownloader...but almost every1 here use firmwares frm samfirmware.com
and no1 had any prob.
Click to expand...
Click to collapse
i'm behind a firwall and cannot acces... i'll try tonite from home...
and let you know...

Not working....
arsalanahmed said:
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Click to expand...
Click to collapse
Dear Arsalan,
I face same problem with my galaxy mini and try to use your procedure for ON my galaxy mini but I not successful please help me.

[Q] i think i softbricked my pop plus

help me plzz..i flashed the squadzone touch2.zip on my pop plus in stock recovery now it wont boot...plzz help
i thought of getting cwm...help me soon

phone gets into recovery and download mode...but odin wont detect pop plus...and also the firmware i downloaded from samfirmware is one pacakage..odin shows out of memory when i select it..

anto.danny said:
phone gets into recovery and download mode...but odin wont detect pop plus...and also the firmware i downloaded from samfirmware is one pacakage..odin shows out of memory when i select it..
Click to expand...
Click to collapse
Really, so while in download mode ODIN doesn't detect it at all?
Do you have odin 4.38 and am using Tass_v1.0.ops with it?
This sounds nothing like what you PM'd me about.
I really can't fix it if i don't know what is broken.

mate..the stock recovery works and the download mode also works...the pc shows usb detected and drivers installed when i connect my pop plus in download mode....but the damn odin wont glow the com port..

first open odin then connect device in download mode
if you can open stock recovery then flash cwm non touchable version flashable with stock recovery
and if you get cwm then flash cm7 i think then it will boot

anto.danny said:
mate..the stock recovery works and the download mode also works...the pc shows usb detected and drivers installed when i connect my pop plus in download mode....but the damn odin wont glow the com port..
Click to expand...
Click to collapse
I asked you to put it in download mode and gave you exact instructions of how to do so and this isn't what you told me in PM.
If i might make a suggestion, return the PC and the phone, you are not fit to use either.
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
dhlalit11 said:
first open odin then connect device in download mode
if you can open stock recovery then flash cwm non touchable version flashable with stock recovery
and if you get cwm then flash cm7 i think then it will boot
Click to expand...
Click to collapse
Don't bother, it's a troll that has been saying different things in different threads and is of absolutely no use.
I regret having a PM discussion with this troll too.

can you give me some example of his pm so i can request mod a ban for him

ooohhhhh tryin to ban me mr.awesome man and i bet you cant ....am not a troll and i ask for help that is all ..

Samsung service center revived my pop plus...from loads of googling i found out that
1.there is no odin program released for GT-S5570I
2.Even if you use the odin meant for pop, pop plus wont be detected..(no matter how updated the usb drive and kies is)
3.Even if you manage to get odin to detect POP plus,once the firware files are loaded odin throws "OUT OF MEMORY" error due to incompatible .ops file(since your using ops meant for galaxy pop)

[Q] Bricked after Kies Update

HI, i´ve search, but just want to confirm if is there any other option, to revive my ace.
I´ve uptdate tne mobile with kies, at middle it stoped, and just display " donload" at the scren , after the error on kies, it power off and boot only to blank screen, nothing more.
Using the " jigKik" , it will whork?
Many thx.
Samsung Ace s5830

Just see if you are able to go to the DOWNLOAD MODE.
If you can then you can easily flash your firmware through ODIN

When the phone is off, press Home + Power + Volume Down and hold.
If 'downloading' appears, you can flash a stock ROM and revive your ace.
Sent from my pet - Megatron™

i think you are not bricked.try dl mode and never update with kies!!
Sent from Ace on JB (4.2.2)

n0p3zz said:
i think you are not bricked.try dl mode and never update with kies!!
Sent from Ace on JB (4.2.2)
Click to expand...
Click to collapse
Thanx, for the help, i do not no if i´m in download mode,because the screen is blank, but the pc recgnozies the phone,in odin it is recgonize, but when try to flash, it does not pass the setup connection, i´m using the OPS-cooperv1.0.
His there any way to revive it??
Many thx

http://www.youtube.com/watch?v=dMVP2IDk2sU
Watch this video and you will flash stock rom..
Sent from Ace on JB(4.2.2)

Try a newer version of Odin if your odin in outdated

Many thx for the help, but no way, the video and the odin don´t work.
The video have the link´s broken,can not get the OPS file.
The odin i´ve tried :
-odin multi downloader v4.38
-Odin Multi Downloader v4.42
The problem is the same, do not pass the setup connection...
Maybe is the OPS file??
I´m desperate, the phone was perfect , try to update and lost the phone
Thx for all the help.

Just to make sure, did you get the yellow "downloading...." word on screen before using the Odin. Because you say the phone is blank when using the Odin.

hanzalah83 said:
Just to make sure, did you get the yellow "downloading...." word on screen before using the Odin. Because you say the phone is blank when using the Odin.
Click to expand...
Click to collapse
Hi, i get that yellow word, using kies, but just the yellow WORD, never tried before the other boot´s, like download,that have a exclamation point or recovery.
is there a way to inject on the phone a new system??
Thx

HI, i´ve tried diferent firmwares, but no luck.
Can anyone please tell me if is there a way to revival my phone??
In Odin, it stuck in « setup connction»
Tried odin 4.38, 4.42

Dorflatino said:
HI, i´ve tried diferent firmwares, but no luck.
Can anyone please tell me if is there a way to revival my phone??
In Odin, it stuck in « setup connction»
Tried odin 4.38, 4.42
Click to expand...
Click to collapse
Have you closed all kies.exe processes? I read somewhere that you can unplug and re-plug the usb when it stuck on "setup connection", but I'm not sure 'cause I didn't tried.

I think he is bricked i have a gem10312bk 9.7tablet and i managed to get cwm on it without a computer i installed a rom and then gapps and then a compatability zip and wen i went to reboot it went blank.i have no computer but took it to a mate whos been flashing and romming all his phones and tablets for some time and he said ur bricked i was gutted yet iv rommedy ace 20 times and not eva had a problem lol so we all learn dont we.im soz for u as i no how i felt just four days ago wen i had it happen to me

HI, is there a way to inject a new boot??
Thx

Wot model is it ?

pete19761 said:
Wot model is it ?
Click to expand...
Click to collapse
Hi, is galaxy ace s5830, thx

Using odin reflash usb drivers and stock rom(samsung will have it) or u can find a thread on utube called bricked samsung galaxy ace and he haas all the threds u need but dont use kies its unreliable and its known to bootloop ur phonealso known as soft brick.if u hold power and the button below ur screen at the same time do u get factory settings?if u do then ur not bricked i can help there to like if this helped

pete19761 said:
Using odin reflash usb drivers and stock rom(samsung will have it) or u can find a thread on utube called bricked samsung galaxy ace and he haas all the threds u need but dont use kies its unreliable and its known to bootloop ur phonealso known as soft brick.if u hold power and the button below ur screen at the same time do u get factory settings?if u do then ur not bricked i can help there to like if this helped
Click to expand...
Click to collapse
Hi, thx, but the problem is that the screen just stay black,
- with the power+up+home, pressed, pc detect it and in odin stuck in «setup connection»
- with power and home, just black screen, pc do not detect
Today after tried several combinations, i did get the phone connect to pc but with the screen off, tried odin, but stuck in the same place.
Thx for all the help.

Dont press up and home and power just home and power mite take five to ten secs and must b timed perfect plus which drive ov ur computer did it detect it in u mite have to change exe paths with drive c or d or whicheva drivers ur using
---------- Post added at 07:45 PM ---------- Previous post was at 07:42 PM ----------
And did u install detect samsung usb drivers programme in ur computer.it specifically for samsung
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Also u can use force connection if u didnt no lol theres threads on here bout that

pete19761 said:
Dont press up and home and power just home and power mite take five to ten secs and must b timed perfect plus which drive ov ur computer did it detect it in u mite have to change exe paths with drive c or d or whicheva drivers ur using
---------- Post added at 07:45 PM ---------- Previous post was at 07:42 PM ----------
And did u install detect samsung usb drivers programme in ur computer.it specifically for samsung
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Also u can use force connection if u didnt no lol theres threads on here bout that
Click to expand...
Click to collapse
The drivers i have are the ones from kies, and it connects without any problem..

[Q] samsung galaxy ace stucks op reboot

O Who can help me? Whom Because I have a very big problem, I've tried before yesterday my samsung galaxy ace in order to put on. A ROM miui using instructions from the site http://forum.xda-developers.com/showthread.php?t=2408748 When, after the installation of the file bieltv.3 # 6 kernel booted my phone, he did nothing more. I also can not get download mode and the recovery is not. I hear it when I put it in the download mode, so to button with the home button and sound down all at once, a sound that Windows sees new hardware, but I can see the phone anywhere. I also tried after I heard this sound to start Odin and who sees it but can not open so I can upload. Nothing the USB port Now you know my big problem and I hope someone knows a solution for me.
regards,
H. van Wouwen

hrvw said:
O Who can help me? Whom Because I have a very big problem, I've tried before yesterday my samsung galaxy ace in order to put on. A ROM miui using instructions from the site http://forum.xda-developers.com/showthread.php?t=2408748 When, after the installation of the file bieltv.3 # 6 kernel booted my phone, he did nothing more. I also can not get download mode and the recovery is not. I hear it when I put it in the download mode, so to button with the home button and sound down all at once, a sound that Windows sees new hardware, but I can see the phone anywhere. I also tried after I heard this sound to start Odin and who sees it but can not open so I can upload. Nothing the USB port Now you know my big problem and I hope someone knows a solution for me.
regards,
H. van Wouwen
Click to expand...
Click to collapse
Bro, you have installed a rom meant for another device and thus hard-bricked your phone. The rom was meant for Samsung Galaxy Ace S5830i while your phone is Samsung Galaxy Ace S5830. As a last resort, follow this guide by @SuperMini to see if you can force open Download Mode through odin mode.
How to unbrick Samsung Galaxy Ace
Here is the link on how to install stock rom using odin. Go to "Preparations" section to download all the necessary files including drivers. If you PC doesn't detect the phone, it usually the problem with drivers. Make sure reinstall drivers if the problem exists.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
If this still doesn't solve the problem, then USB Jig is you last option. Do post the result. Hope I Helped

the result
Thanks for your quick response, but it did not work. I have ordered a USB jig and go give it another try with it, if you have any other tips or helpful suggestions have then I'd hear it.
kindly thank you for your support.
H. van Wouwen

hrvw said:
Thanks for your quick response, but it did not work. I have ordered a USB jig and go give it another try with it, if you have any other tips or helpful suggestions have then I'd hear it.
kindly thank you for your support.
H. van Wouwen
Click to expand...
Click to collapse
Glad I could help and be sure to post the result on using USB Jig so that others experiencing this same problem knows what to do

USB jig
I want to let you know that it did not work, and that the samsung galaxy ace is finally broken. Therefore not recommended to use. Usb jig
regards,
H. van Wouwen