O Who can help me? Whom Because I have a very big problem, I've tried before yesterday my samsung galaxy ace in order to put on. A ROM miui using instructions from the site http://forum.xda-developers.com/showthread.php?t=2408748 When, after the installation of the file bieltv.3 # 6 kernel booted my phone, he did nothing more. I also can not get download mode and the recovery is not. I hear it when I put it in the download mode, so to button with the home button and sound down all at once, a sound that Windows sees new hardware, but I can see the phone anywhere. I also tried after I heard this sound to start Odin and who sees it but can not open so I can upload. Nothing the USB port Now you know my big problem and I hope someone knows a solution for me.
regards,
H. van Wouwen
hrvw said:
O Who can help me? Whom Because I have a very big problem, I've tried before yesterday my samsung galaxy ace in order to put on. A ROM miui using instructions from the site http://forum.xda-developers.com/showthread.php?t=2408748 When, after the installation of the file bieltv.3 # 6 kernel booted my phone, he did nothing more. I also can not get download mode and the recovery is not. I hear it when I put it in the download mode, so to button with the home button and sound down all at once, a sound that Windows sees new hardware, but I can see the phone anywhere. I also tried after I heard this sound to start Odin and who sees it but can not open so I can upload. Nothing the USB port Now you know my big problem and I hope someone knows a solution for me.
regards,
H. van Wouwen
Click to expand...
Click to collapse
Bro, you have installed a rom meant for another device and thus hard-bricked your phone. The rom was meant for Samsung Galaxy Ace S5830i while your phone is Samsung Galaxy Ace S5830. As a last resort, follow this guide by @SuperMini to see if you can force open Download Mode through odin mode.
How to unbrick Samsung Galaxy Ace
Here is the link on how to install stock rom using odin. Go to "Preparations" section to download all the necessary files including drivers. If you PC doesn't detect the phone, it usually the problem with drivers. Make sure reinstall drivers if the problem exists.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
If this still doesn't solve the problem, then USB Jig is you last option. Do post the result. Hope I Helped
the result
Thanks for your quick response, but it did not work. I have ordered a USB jig and go give it another try with it, if you have any other tips or helpful suggestions have then I'd hear it.
kindly thank you for your support.
H. van Wouwen
hrvw said:
Thanks for your quick response, but it did not work. I have ordered a USB jig and go give it another try with it, if you have any other tips or helpful suggestions have then I'd hear it.
kindly thank you for your support.
H. van Wouwen
Click to expand...
Click to collapse
Glad I could help and be sure to post the result on using USB Jig so that others experiencing this same problem knows what to do
USB jig
I want to let you know that it did not work, and that the samsung galaxy ace is finally broken. Therefore not recommended to use. Usb jig
regards,
H. van Wouwen
Related
I installed Clock Work Mod on my Samsung Galaxy Mini and after that, I selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
I don't know if this is the right section. Thanks.
Up. Help me.
neilgoco said:
I installed Clock Work Mod on my Samsung Galaxy Mini and after that, I selected "Reboot from recovery mode" and then after that the device turned off. It would not turn on anymore! Can't enter download mode and recovery mode, screen is off, no backlights. Odin would not detect it too. Please help.
I don't know if this is the right section. Thanks.
Click to expand...
Click to collapse
Sometime the phone discharges have u tried starting op in 'download mode' while charging and reinstalling Froyo again using Odin?
Yesterday I have received my sgm mobile and i had exactly the same problem with the same aplication. The mobile seems to be dead it is not detected by the pc and can't be charged. Can anybody help us ?
i have same problem with my mini today, i upgraded to 2.34 because of wi-fi, it won't connect and everything was allright.
then i downgraded to 2.2 wih 2.33 ops and odin 4.38, but then my phone it doesn't even turn on. i mean no recovery mode, no downloading mode, nothing. it don't turn on at all and odin don't detect. what to do?
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
debsattam said:
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
Click to expand...
Click to collapse
Can you post a link to that specific video? Thanks.
debsattam said:
hey use the jig method type unbricking galaxy s jig in youtube
and do the same u will get download mode in it and never use ROM MANAGER
however its a great software but it dont supports some samsung phones.
especially low end phones
Click to expand...
Click to collapse
By the way, is the USB Jig for SGS the same size with the USB slot of the Galaxy Mini? Does the USB Jig works on Galaxy Mini? Is this tried and tested on this pgone? Sorry for too many questions. Thanks.
---
I am here: http://maps.google.com/maps?ll=14.728119,121.029307
Go a google search with "unbricking galaxy s jig"
It can be use for xperia mini too.
Gudluck!
It might be,battery suddenly empty. Its hard for phone to brick.Charge ur phone 1st at full... And choose the right baseband according rom prequistid. I b4 this rooted and installing CWM on this galaxy mini and the phone at samsung logo or samsung galaxy mini logo.
As on my condition,follow guide that been explained. If u have flashed the CWM, REBOOT. Then at samsung logo,press volume down,then u can access CWM. To avoid other probs, flash it with cyanogen mod. Or it maybe cant be loaded.
As far i concerned, for galaxy mini got 2 type of recovery. That is,
Enchanced recovery
&
Tass Recovery
For me,choose tass recovery.
Sent from my HTC Vision with Doubleshot Rom
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Did I get some of the previous posts about using usb jigs for SGS on samsung galaxy GT S 5570 right??
What software is required?
Some USB jigs for SGS 900XX (as in 9000i 9003i etc) are available on line for between INR 250 to 600 (1 U$D is approx 49 INR).
arsalanahmed said:
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Click to expand...
Click to collapse
Step 1-4 done,
but my Odin doesn't detect it..
Should I go to jig mode?
The best thing is to give it to the service center
I agree, I should have made it
armanke13 said:
Step 1-4 done,
but my Odin doesn't detect it..
Should I go to jig mode?
Click to expand...
Click to collapse
My odin detects the phone, report a new succesful update...
...but the phone is still not booting up - the logo do not appear !!
(battery is hot, something is going on...)
stepph said:
My odin detects the phone, report a new succesful update...
...but the phone is still not booting up - the logo do not appear !!
(battery is hot, something is going on...)
Click to expand...
Click to collapse
cud be the firmware u used or somethin?
roofrider said:
cud be the firmware u used or somethin?
Click to expand...
Click to collapse
tried two official for my region from 'checks fus downloader'...
stepph said:
tried two official for my region from 'checks fus downloader'...
Click to expand...
Click to collapse
not sure abt fusdownloader...but almost every1 here use firmwares frm samfirmware.com
and no1 had any prob.
roofrider said:
not sure abt fusdownloader...but almost every1 here use firmwares frm samfirmware.com
and no1 had any prob.
Click to expand...
Click to collapse
i'm behind a firwall and cannot acces... i'll try tonite from home...
and let you know...
Not working....
arsalanahmed said:
(I think this set of steps works in these conditions: Hard-brick, absolutely non-responsive to any button combination. Odin still recognizes the phone when connected through USB port)
1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
I finally flashed it widh Gingerbread 2.3.4 but i don't really like it, because it ended up a little buggy, which i am still trying to get rid of.
Anyway, i hope this helps.
Have a nice day
Fomelogo
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
Uploaded with ImageShack.us
This tutorial is very complicated and I have tried to explain it as best as I can, hope it help some of you guys.
PS. If you have any USB driver problems or windows deleted problems with device managers or drivers in general causing errors you must fix these problems first or use a different computer, if the drivers wont install properly you cannot do it on that computer.
EDIT: Gingerbread 2.3.4 firmware, I can confirm this works
Click to expand...
Click to collapse
Dear Arsalan,
I face same problem with my galaxy mini and try to use your procedure for ON my galaxy mini but I not successful please help me.
For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.
Hello,
I have installed this "ibtimes . co . uk / articles / 419836 / 20130102 / android421-jellybean-cm101-custom-rom-samsung-galaxy . htm" rom on my (actually my mom's) galaxy ace S5830 and it worked just fine. Before i installed it i made a CWM recovery backup. I wasn't happy with the rom so i wanted to go back to my last one by restoring the backup. first i wiped data and cache and then restored the backup. But now when i tried to reboot the system it got stuck on the Samsung logo and later on it was just a light blue screen. can someone help me please.
Don't worry, you need to flash a stock ROM via Odin. Look at the stickies
Sent from my pet- Megatron™
Chill your phone can be fixed easily
Simple Bro , Download the firmware files from sammobile.com then Google for Galaxy Ace Odin ..I guess the version is 4.38 or something like that ..and make sure you download the cooper file with it then flash the original firmware using Odin.So then your phone is back to how it was when you bought it.
I hope this was helpful.
If you want the instructions on how to do this ..let me know ..I'll give you the link for the files also
Help!
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Dude! Switch off the phone. Then press the 3key combo to go to Download mode. U don't need to go to recovery either (which is a 2key combo). & ops name should be:-
COOPER_v1.0.ops
Sent Via XDA™ Premium
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Hi BscorpionII!
As you can open recovery, if you don't have CWM 5.0.2.6 you could install it from your recovery and then try installing another ROM from CWM 5.0.2.6.
You could read this link
"Nielli's [GUIDE] Guides and Tips How to Root SGA, Install CWM5 and install Mods + Downloads"
In the link you'll find the last stable recovery -version 5.0.2.6- and much more.
Good luck.
idk where should I post, so I make same thread twice
well, looks like i'm totally f*cked up.
i have samsung galaxy ace (GT-S5830), but I've installed wrong custom rom. it is for GT-S5830i
here the rom goes : http://forum.xda-developers.com/showthread.php?t=2408748
after I press reboot on CWM, it just not powered on anymore. I even test with power supply, when I press power, it does not react!
the other problem is, my volume down key somehow break, so i can't use download mode!
will USB JIG work? it is VERY HARD to search USB JTAG here.
well, if you want to say buy a new phone, i have bought new one.
i bought this ace only for approximately $15 ... so it is not the real problem. but i love this ace somehow ...
rinaldo.jonathan said:
idk where should I post, so I make same thread twice
well, looks like i'm totally f*cked up.
i have samsung galaxy ace (GT-S5830), but I've installed wrong custom rom. it is for GT-S5830i
here the rom goes : http://forum.xda-developers.com/showthread.php?t=2408748
after I press reboot on CWM, it just not powered on anymore. I even test with power supply, when I press power, it does not react!
the other problem is, my volume down key somehow break, so i can't use download mode!
will USB JIG work? it is VERY HARD to search USB JTAG here.
well, if you want to say buy a new phone, i have bought new one.
i bought this ace only for approximately $15 ... so it is not the real problem. but i love this ace somehow ...
Click to expand...
Click to collapse
I'd say your phone is pretty much bricked.
rinaldo.jonathan said:
idk where should I post, so I make same thread twice
well, looks like i'm totally f*cked up.
i have samsung galaxy ace (GT-S5830), but I've installed wrong custom rom. it is for GT-S5830i
here the rom goes : http://forum.xda-developers.com/showthread.php?t=2408748
after I press reboot on CWM, it just not powered on anymore. I even test with power supply, when I press power, it does not react!
the other problem is, my volume down key somehow break, so i can't use download mode!
will USB JIG work? it is VERY HARD to search USB JTAG here.
well, if you want to say buy a new phone, i have bought new one.
i bought this ace only for approximately $15 ... so it is not the real problem. but i love this ace somehow ...
Click to expand...
Click to collapse
you should try JIG. It works for most of the cases.:good:
PS: Never try any GT-S5830i custom rom for cooper
rinaldo.jonathan said:
idk where should I post, so I make same thread twice
well, looks like i'm totally f*cked up.
i have samsung galaxy ace (GT-S5830), but I've installed wrong custom rom. it is for GT-S5830i
here the rom goes : http://forum.xda-developers.com/showthread.php?t=2408748
after I press reboot on CWM, it just not powered on anymore. I even test with power supply, when I press power, it does not react!
the other problem is, my volume down key somehow break, so i can't use download mode!
will USB JIG work? it is VERY HARD to search USB JTAG here.
well, if you want to say buy a new phone, i have bought new one.
i bought this ace only for approximately $15 ... so it is not the real problem. but i love this ace somehow ...
Click to expand...
Click to collapse
Well can the phone boot up into recovery mode or totally you get nothing when you pressed on the power button?
Zerien said:
Well can the phone boot up into recovery mode or totally you get nothing when you pressed on the power button?
Click to expand...
Click to collapse
It happened the same to me...
When I try, I can get it to recovery mode, what should I do ?
tfilipeac said:
It happened the same to me...
When I try, I can get it to recovery mode, what should I do ?
Click to expand...
Click to collapse
Try installing any custom rom for Samsung Galaxy Ace S5830 through CWM. If that still doesn't work, flash the stock rom using odin from your Download Mode. Do post the result. Hope I Helped
tfilipeac said:
It happened the same to me...
When I try, I can get it to recovery mode, what should I do ?
Click to expand...
Click to collapse
Follow the instructions on this site. Make sure you have a s5830 ONLY without an i. This way works for me
same problem
i have the same problem have some one already fixed it
parsnep said:
i have the same problem have some one already fixed it
Click to expand...
Click to collapse
Usually if you install something not meant for your device, you basically hard-brick that device. If you have hard-bricked your phone, then you will not be able to go to Recovery Mode or Download Mode. In that case, you can try the guide by @SuperMini to force open Download Mode from odin. Here is the link,
How to unbrick Samsung Galaxy Ace
If that doesn't work, then you can try the USB Jig (not always guaranteed to work). If USB Jig did work, then it will force open the Download Mode so you can flash stock rom back using odin. If USB Jig doesn't work either, then your last option is to consult the Service Center. Do post the result. Hope I Helped
mahithm said:
Usually if you install something not meant for your device, you basically hard-brick that device. If you have hard-bricked your phone, then you will not be able to go to Recovery Mode or Download Mode. In that case, you can try the guide by @SuperMini to force open Download Mode from odin. Here is the link,
How to unbrick Samsung Galaxy Ace
If that doesn't work, then you can try the USB Jig (not always guaranteed to work). If USB Jig did work, then it will force open the Download Mode so you can flash stock rom back using odin. If USB Jig doesn't work either, then your last option is to consult the Service Center. Do post the result. Hope I Helped
Click to expand...
Click to collapse
the odin thing didn't work for me .
but i don't have USB JIG so i can't try it.
parsnep said:
the odin thing didn't work for me .
but i don't have USB JIG so i can't try it.
Click to expand...
Click to collapse
If you are interested, then you can make one yourself. Just follow this guide,
Need a Samsung USB Jig? Build Your Own
Hope I Helped
parsnep said:
i have the same problem have some one already fixed it
Click to expand...
Click to collapse
yes it happen for me before .. i accidently flashed a s5830i rom in my galaxy ace .. when you reboot the phone screen is black
the only way to fix it is to do a jtag repair see this video http://www.youtube.com/watch?v=dpEnEQ4Na1Y
Salim PS said:
yes it happen for me before .. i accidently flashed a s5830i rom in my galaxy ace .. when you reboot the phone screen is black
the only way to fix it is to do a jtag repair see this video http://www.youtube.com/watch?v=dpEnEQ4Na1Y
Click to expand...
Click to collapse
This is exactly what they do at the Service Centre
Guys
Pls help me.I was trying upgrade my old samsung galaxy s i9000
First i rooted my i9000 and then i flashed the rom and gapps
And it booted up then it was 4.2 jellybean bt the root was gone so with the same
Method i did last time i used it again bt this time it bricked
It was not going to recovery mode and nt booting up
I tried to fix bt the worse thing happen no download mode no recovery mode
And not booting up.
Guys i really want to use that mobile again
Pls help!!
Try this, remove battery and sim card then hold the buttons to get into download/recovery mode and while your holding the buttons replace the battery. if that doesn't work then try a jig, you can buy one or make your own. info here http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
Mex e can said:
Guys
Pls help me.I was trying upgrade my old samsung galaxy s i9000
First i rooted my i9000 and then i flashed the rom and gapps
And it booted up then it was 4.2 jellybean bt the root was gone so with the same
Method i did last time i used it again bt this time it bricked
It was not going to recovery mode and nt booting up
I tried to fix bt the worse thing happen no download mode no recovery mode
And not booting up.
Guys i really want to use that mobile again
Pls help!!
Click to expand...
Click to collapse
Try using the method provided by pryerlee but leave it on download mode. Use Odin or Heimdall to flash a new kernel and just after it reboots, quickly go into recovery mode where you should factory reset and delete the caches. Hope this helps!
pryerlee said:
Try this, remove battery and sim card then hold the buttons to get into download/recovery mode and while your holding the buttons replace the battery. if that doesn't work then try a jig, you can buy one or make your own. info here http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707
Click to expand...
Click to collapse
This didn't help but thanks for replying!
You should still have download mode as it is hard coded into memory. Maybe try with a USB JIG and you can make one if you don't want to buy one. http://www.xda-developers.com/android/need-a-samsung-usb-jig-build-your-own/
I can get to download mode, but with various PC's and laptops, different USB cables (including the original Samsung) the phone does not appear as a device.
Any ideas?
Mex e can said:
Guys
Pls help me.I was trying upgrade my old samsung galaxy s i9000
First i rooted my i9000 and then i flashed the rom and gapps
And it booted up then it was 4.2 jellybean bt the root was gone so with the same
Method i did last time i used it again bt this time it bricked
It was not going to recovery mode and nt booting up
I tried to fix bt the worse thing happen no download mode no recovery mode
And not booting up.
Guys i really want to use that mobile again
Pls help!!
Click to expand...
Click to collapse
You used the same root package? If so, then maybe you flashed a wrong kernel.
Sent from my GT-I9000 using XDA Premium 4 mobile app
cosminnn said:
I can get to download mode, but with various PC's and laptops, different USB cables (including the original Samsung) the phone does not appear as a device.
Any ideas?
Click to expand...
Click to collapse
Did you solve the problem meanwhile after 2 weeks?
Is Samsung USB driver properly installed on your PC?
tetakpatalked from Nexus 7 flo
tetakpatak said:
Did you solve the problem meanwhile after 2 weeks?
Is Samsung USB driver properly installed on your PC?
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
It's solved. thanks.
I inserted the battery while booting into download mode. This after I left the phone to charge for a while.