App Notification Settings - Vibrate - One (M7) Q&A, Help & Troubleshooting

I tend to not have vibrate on out night especially this phone, the vibrate is quite loud and the curved back doesn't help when the phone is on my bedside cabinet.
I switched to sound only in sound settings but to my surprise it still vibrated when I received a text via stock sms app, I guess the same would happen if I received a whatsapp message.
Does anybody know how to easily turn off ALL App specific vibrate settings in go? Or would I have to go into each individual app to switch it off?
Thanks
Sent from my HTC One using Tapatalk 2

Great timing, I was just about to post the same question (if it's an answer you want the best I can offer is "No, I don't think you can, at least I haven't found out how, which is why I'm here").
For me it's the alarm, a nice tune to wake up to is great but it's not so nice when the phone spazzes out and bounces all over the cabinet like a runaway chainsaw (over dramatic, moi?). I've not found anything to turn it off and it's really annoying.

Bit of a design flaw really, surely the overall sound settings should be the master, but a setting should allow you to override it via app, I.e if on it allows app settings to use it's own sound settings if off it goes by the master. Maybe that's expecting too much.
Sent from my HTC One using Tapatalk 2

It's worse than that, I don't have vibration switched on for anything, the sound profile is "Normal" (as opposed to Vibrate or Silent) and my in-app settings also have it turned off wherever there's an option to do so but the alarm still sets it off.

I suffer from the same....
flathunt said:
It's worse than that, I don't have vibration switched on for anything, the sound profile is "Normal" (as opposed to Vibrate or Silent) and my in-app settings also have it turned off wherever there's an option to do so but the alarm still sets it off.
Click to expand...
Click to collapse
I tied to install the GE HD3.2 and it has an option to get the alarm without vibration.
when I switched back to Revolution 20.2 this option disappeared......

Just push the stock GE clock app to your system/app folder and set correct permissions and you can turn vibrate off on any Sense ROM ... Best way is to just flash that app in custom recovery, I will post it if anybody requires.

Related

[APP] LG 2X/Black Notifications

Hi everyone !
LG 2X/Black Notifications is an app that handles incoming notifications and uses the LED buttons on the device to notify the user of any missed notifications. LG Optimus 2X (P990/P999/SU660), LG Optimus Black (P970) and LG Optimus 3D (P920) is supported. It does not require root if the required files has the proper permissions, if they do not root is required to change them (currently the latest update for T-Mobile G2x and LG Optimus 3D). It should be usable on all ROMs (not tested though). CyanogenMod7 has its own LED-notifications which has to be disabled if you wish to use this app.
Features
Built-in support for Gmail/SMS/MMS/Missed calls
Support for any activity that generates notifications by using Accessibility
Configurable pulse and vibration for every notification
Set the default touch LED brightness
Charging indicator
How the app works
The app is in an idle state and will do nothing until the device receives a notification.
When an notification is received and the screen is on and not in lock-screen, the accelerometer sensors will be started and used as a way to detect user activity. If the sensor is triggered the feedback will be cancelled. If the sensor is not triggered and the screen is turned off the feedback will start.
If the screen is off the feedback will be delayed for 2 seconds. The reason for this is because some notifications might turn on the screen and in turn will cancel the feedback, so the delay will hopefully prevent this. If nothing happens during the delay the feedback starts at once.
The feedback will repeat until it is timed out or the screen is turned on.
If you have any questions and/or bugs to report about the app don't hesitate to post a reply to this thread or send me a message and I'll answer them as soon as possible. I'm also open for suggestions of features to implement. However due to limited time at the moment new features may take a while to be implemented.
Download
For more information and free download check it out on the Android Market.
/ Martin Börjesson
Changelog
0.9.3.2
9 July 2011
Fixed a bug which sometimes caused the feedback to start even though a notification has been read.
Fixed: Accidentally used the "Off time"-string for the "On time" in the sleep-settings.
0.9.3.1
23 June 2011
Fixed a bug which caused the accelerometer-sensor to not turn off when it should (should fix some battery drain issues)
Lowered disable feedback on low battery value to 15%
0.9.3
SMS/MMS-fix: Increased default delay to 4 seconds
Prepared app for translations
0.9.2
SMS/MMS problem: Reverted to old code in an attempt to fix the problem with SMS/MMS not working properly for everyone. Please tell me if problem still persist.
Added some checks to prevent the pulse from starting if SMS has been checked.
This is a great app, thanks!
where can I get it anyway?
pa64 said:
This is a great app, thanks!
Click to expand...
Click to collapse
You're welcome !
lovemage said:
where can I get it anyway?
Click to expand...
Click to collapse
It's at the bottom of the first post, I've clarified it a bit now.
Thanks!! I've been using this since beta 0.3
Just a request...
Can accelerometer be disabled ? Cos i may be picking up the phone but not looking at the screen at all.
And, can the App icon be reverted to have transparent background (like in the early betas)
Cheers
Sent from my LG-P990 using XDA App
dohanin said:
Thanks!! I've been using this since beta 0.3
Just a request...
Can accelerometer be disabled ? Cos i may be picking up the phone but not looking at the screen at all.
And, can the App icon be reverted to have transparent background (like in the early betas)
Cheers
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
An option to disable accelerometer could be added, but then you would get the pulse for every incoming notification even if you've looked at them (if you were using the phone when you got them). The accelerometer is disabled when the screen is off or in the lock-screen (if you use another lock-screen than the default this might not be true though) so that if you receive a notification and then move your phone around without unlocking it the pulse should still start. So generally the accelerometer shouldn't be a problem, but if you really want an option for it I could add one
I changed the appearance of the icon since it couldn't be seen on Market because it has a white background. I also preferred the old look But it might be possible to fix it somehow, I'll note it down and look at it when I have time.
Nice app man... has solved all problems with notifications led
Thanks
managed to work, would prefer a led like i had in my X10 =/, but its great
So far works great. Thanks for the share mate! I'll try it for a couple more days and I'll be sure to leave you a comment in the market.
Nice App!
Keep going!
thanks for the effort man!
hi
really nice app
After the most recently update of Handcent SMS it's possible to choose Handcent as the default messaging application, and by then disable the stock messaging application. But when you do so, LG 2X/Black Notifications doesn't work when you receive a message. Do you think you can fix this in a future update?
This app can "listen to" other application's notifications. Did you try to enable the "monitoring" for Handcent ? (notification > select monitored activities)
Great work!
lpn- said:
This app can "listen to" other application's notifications. Did you try to enable the "monitoring" for Handcent ? (notification > select monitored activities)
Click to expand...
Click to collapse
Yes, it can..
It just much more better from it's beta version..
Now i can have notification on my Whatsapp chat while ringtone is turned off..
Hi,
first of all i would like to say a big thanks to the developer xigzil of this great app, it always worked reliably on my LG P990.
Now i have changed my device to Samsung Galaxy S2 and wanted to ask xigzil if is possible to make this app work with?
I would really appreciate it and with a high probability of many other too.
Thanks in advance.
Max One
For the charging monitoring can you make it so that as the charge gets closer to 100% more of the LEDs are on.
For example 0-30% the menu LED is on 31-60% Menu and Home LED on. 61-90% Menu Home and Back LED are on. And 91-100% all 4 LEDs on. Somthing like that.
OR even if they could even pulse kinda like the battery icon at the top of the screen does where it will fill in blocks (if that makes sense)
Suggestion
Hi,
I love this application. But I have a suggestion. I have Go SMS Pro and the screen turns on when I receive a message. After the screen turns on, the notifications stop, even if I turn the screen off!
Could you add an option to make the notification works until there aren't any notification left?
An example, I'm at work and I receive a message, I turn the screen on to see who send me a message, but I don't read it. It stays unread (the notification in the top bar stays there). And then I turn off the screen to see the message when I have the time. But the notification stops. I what the notification never stops until I read the message. I don't mind if the notification is working even if I using the phone.
Thanks

Nexus 4: Updates I would like see

Hi, I am just sharing some things I would like to see in the future.
An option to completely disable vibration. Although I switched it off from the settings, I still had to go to WhatsApp to switch it off there too.
When I set an alarm through Google Now, it sets vibration on by default. I need to always go in to Alarm and remove the tick.
I like the keyboard, would be nice to be able remove a word from the dictionary from the predicted text on the keyboard by holding the word for an option to remove(similar to Swift Keyboard).
Multitasking, If I long hold the multitask button it should clear all the background apps rather then swiping them one by one. It would be very useful to have a pin icon next to an app to pin it down so you can keep an app running like YouTube in case if you are watching a long clip.
Camera is fantastic, I miss the pause feature while recording. Now I do use the Movie Studio, but it takes time to convert(Samsung has the pause feature I am talking about).
3G internet, there is an option to disable background data which is fantastic to keep free software from advertising on your phone especially if you aren't on an unlimited data plan. What is missing is that although I activate "restrict background data" there should of been an option to put some applications as exception like WhatsApp.
Many might not know, but if you long hold WiFi icon from the quick settings it turns on the WiFi, same for Bluetooth. I would like to see this reverse. One click toggles on and off and long press takes you directly into the menu..
I will add more things in the future.
I am not complaining, just features I wouldn't mind seeing. I am really happy with this phone.
Well i'd like to see BT working while WiFi is enabled too...!
Sent from my Nexus 4 using xda app-developers app
My alarm doesn't go into vibrate mode on its own when I set it with Google Now.
And I also agree that there should be a button to close all the programs out, but I think there are third party apps that serves the purpose.
Wifi not stall when in sleep mode, so notifications work.
Mobile network 3g to work properly on my sim, old but still works fine on other phones.. 1 minute works/ next minute stalled..repeat, 2g works ok
Speed to match other phones with s4pro
Volume raised to decent levels
non stupid quick settings.. c'mon how can they bodge it twice ? it's quick settings not brain surgery

Turn off Vibrate

Hopefully a quick topic, but anyone with a Nexus 6 / Lollipop figure out how to turn off notification vibration?
usman21986 said:
Hopefully a quick topic, but anyone with a Nexus 6 / Lollipop figure out how to turn off notification vibration?
Click to expand...
Click to collapse
I think for now you have to change the the notifications setting below the volume slider to "None". I don't have my Nexus 6 yet, but I did update to Lollipop on my Nexus 5.
usman21986 said:
Hopefully a quick topic, but anyone with a Nexus 6 / Lollipop figure out how to turn off notification vibration?
Click to expand...
Click to collapse
Which notification/s? Most if not all (that I know of) have their own setting within the app itself. This would go in the Q&A section
Some apps like "Power Toggles" will allow you to use a toggle that gives you the old Silent mode back. It looks like it is in priority mode but it's one step further. Notification light works, alarms work but nothing makes noises (all the system noises are silenced). I am using that for now.
How is there not a complete silent mode on this phone? Ridiculous, especially considering the Nexus 9 has one and it's a TABLET!!!
VTEChump said:
How is there not a complete silent mode on this phone? Ridiculous, especially considering the Nexus 9 has one and it's a TABLET!!!
Click to expand...
Click to collapse
There is one. Press volume up/down and then tap on None at the top.
zephiK said:
There is one. Press volume up/down and then tap on None at the top.
Click to expand...
Click to collapse
No, this turns off ALL notifications. There should be a way to still get notifications without the phone vibrating.
zephiK said:
There is one. Press volume up/down and then tap on None at the top.
Click to expand...
Click to collapse
I still want my notifications to show up on my phone/moto 360 but the way the Nexus 6 handles the notifications makes my moto pretty much useless.
I love this phone, but this was a stupid mistake on Google's part. You should be able to disable all vibrations without impact to notifications. On top of that, you should be able to control the intensity of the vibrations. Uggg. :bad:
nubsors said:
I love this phone, but this was a stupid mistake on Google's part. You should be able to disable all vibrations without impact to notifications. On top of that, you should be able to control the intensity of the vibrations. Uggg. :bad:
Click to expand...
Click to collapse
Agreed. For me the vibration motor on this phone is louder than the actual notification sounds, it's embarrassing. Was able to customize intensity on my Note 2. I've just been using priority mode to keep things silent during work, and the Pushbullet app to have notifications pop up on my computer. That system has been working pretty well at least.
No fix for this yet?
nubsors said:
I love this phone, but this was a stupid mistake on Google's part. You should be able to disable all vibrations without impact to notifications. On top of that, you should be able to control the intensity of the vibrations. Uggg. :bad:
Click to expand...
Click to collapse
You can change the intensity using custom kernel like elementalX.
jtwlbz said:
You can change the intensity using custom kernel like elementalX.
Click to expand...
Click to collapse
Yes, but I shouldn't have to run a custom kernel. This is a ridiculous oversight by Google.
nubsors said:
Yes, but I shouldn't have to run a custom kernel. This is a ridiculous oversight by Google.
Click to expand...
Click to collapse
I'm not exactly -against- running a custom kernel, but I'd like to modify as little as possible. At this point, I'd totally be willing to disable vibration completely rather than try and tweak it into oblivion. I'm currently on the CM12 official nightly. I was using franco kernel, and it was good, but it seems that the cm kernel is doing just fine for me right now.
If anyone knows a surefire way to break the vibration(in software) do tell!!
So I use an app called audio manager and one of the options is to make vibrations to be turned off. This has worked for me with no impact to notifications. This is a great fix for those of us who are trying to stay factory
Here is screen shot of what to do in the correct order
there is an option in the phone, and messaging app, that you can turn off vibration. go into messages.. click settings, notifications, viola.. uncheck the vibrate box.
I don't have any vibrate on any of my notifications all the apps have there own settings as to whether u want vibrate or not.
Sent from my Nexus 6 using XDA Free mobile app
Turn off Vibration application in Nexus 6 lollipop 5.1.0
usman21986 said:
Hopefully a quick topic, but anyone with a Nexus 6 / Lollipop figure out how to turn off notification vibration?
Click to expand...
Click to collapse
Its kinda old though:
I turn off my vibration notification by going to the app.
For me was to disable only vibration of Hangout notification.
I went :
1) slide main menu of Hangout
2) Setting
3) choose account like [email protected]
4) In HANGOUT NOTIFICAITON section, click "Hangout messages & invites"
5) uncheck vibrate to disable.
Enjoy!
Anil3a said:
Its kinda old though:
I turn off my vibration notification by going to the app.
For me was to disable only vibration of Hangout notification.
I went :
1) slide main menu of Hangout
2) Setting
3) choose account like [email protected]
4) In HANGOUT NOTIFICAITON section, click "Hangout messages & invites"
5) uncheck vibrate to disable.
Enjoy!
Click to expand...
Click to collapse
but it's my facebook notifications and when I go to that app it has no selection for vibrate... I don't want to turn it to "none" on notifications I just want SILENT?

Separate volume control for notifications and flashlight.

I am testing out a Moto Z Force (coming from a Nexus 6P) to see if I can handle switching without having root. And a couple of things I am missing already. Is there anyway to break out the volume controls and have a separate control for ringtone and a separate one for your notifications like sms? I hate having the same volume control for ringtone and sms. Next, I miss my "power menu". Is there anyway to get the flashlight option by pressing and holding the power button down?
I know these are not big deals...just seeing if I can fix them
@darkcyber20 I don't know of a way without having root privileges to ruin the volume controls.
For the flashlight though, Moto has baked in a gesture for quickly enabling it. It's a double chop motion. Look in the Moto app, in the section called Actions.
Sent from my XT1650 using Tapatalk
PiousInquisitor said:
@darkcyber20 I don't know of a way without having root privileges to ruin the volume controls.
For the flashlight though, Moto has baked in a gesture for quickly enabling it. It's a double chop motion. Look in the Moto app, in the section called Actions.
Sent from my XT1650 using Tapatalk
Click to expand...
Click to collapse
Well, crap! Why do these phone manufactures think people want to have the same volume level for their ringtone as for their text app? Thanks for the information! The ringtones and notifications sounds are considerable lower than my Nexus 6P
darkcyber20 said:
Well, crap! Why do these phone manufactures think people want to have the same volume level for their ringtone as for their text app? Thanks for the information! The ringtones and notifications sounds are considerable lower than my Nexus 6P
Click to expand...
Click to collapse
I personally hate the separate ringtone/notification volume controls. That was one thing that seriously annoyed me about the Sammy phones I have owned. I'd lower the volume with the side buttons then get blasted by a notification tone.
Sent from my XT1650 using Tapatalk
I like separate volume controls. I use an app to set the volumes/vibration appropriately for the situation.
Also, it should be easy to allow the volumes to be linked if desired. Someday we will have the best of both worlds.
Smithfolk4 said:
I like separate volume controls. I use an app to set the volumes/vibration appropriately for the situation.
Also, it should be easy to allow the volumes to be linked if desired. Someday we will have the best of both worlds.
Click to expand...
Click to collapse
which app?
my notifications are too low
Z51 said:
which app?
my notifications are too low
Click to expand...
Click to collapse
The app I use is called Audio Profiles. Unfortunately it does not have the ability to set different volumes for the ring tone and the notification unless the phone allows it. I had the LG G5 and the Note 7 (for a few days) and it worked with both of those. It won't work with the Moto Z family. My comment that you quoted simply meant that it shouldn't be that hard for the software to allow either separated or linked ring and notification tones.
However, my notification tone is OK. There is a known issue with the notification tones being hosed. It seems to be sort of random. When I was trying to select a tone, I could not hear some of them so I selected one that was a good volume. Not sure if you are able to pick one that sounds OK. Some folks can and some cannot. Hopefully this will be resolved with the next update.
Also, Audio Profiles is not perfect. Sometime it doesn't give you the profile you selected. It is better than 95% with my experience which isn't bad. I had a hard time finding one that worked at all. I used to use Tasker, but gave that up.
Smithfolk4 said:
The app I use is called Audio Profiles. Unfortunately it does not have the ability to set different volumes for the ring tone and the notification unless the phone allows it. I had the LG G5 and the Note 7 (for a few days) and it worked with both of those. It won't work with the Moto Z family. My comment that you quoted simply meant that it shouldn't be that hard for the software to allow either separated or linked ring and notification tones.
However, my notification tone is OK. There is a known issue with the notification tones being hosed. It seems to be sort of random. When I was trying to select a tone, I could not hear some of them so I selected one that was a good volume. Not sure if you are able to pick one that sounds OK. Some folks can and some cannot. Hopefully this will be resolved with the next update.
Also, Audio Profiles is not perfect. Sometime it doesn't give you the profile you selected. It is better than 95% with my experience which isn't bad. I had a hard time finding one that worked at all. I used to use Tasker, but gave that up.
Click to expand...
Click to collapse
I can barely hear my notifications. guess i have an affected device.
good news is a new one is on its way. mine came out of the box with a bad LCD, (black spot top left corner) and moto sent me a new device already. hopefully it doesnt have that audio bug. its driving me nuts
Got my new Device today. Same issue with the sound. Might have to call moto to try and make another claim And get a non updated device. This came with the latsst update pre installed unfortunately.
Sent from my XT1650 using Tapatalk

Any way to reprogram the slider without root?

Hi, like the title says. I tried Notification Slider by Seveilith, but it doesn't seem to work on the 3T. More specifically i just want completely silent on one (excluding alarms), vibrate (excluding alarms) on another, and normal ringing on the last. I don't care about priority settings or those kinds of things. But I don't really want to root (I don't miss much), since I'd lose OTA.
What all allows you to do this with root? And not needed xposed? I am rooted but do not want to install xposed
I'm rooted with exposed and tried many ways to modify this annoying slider with zero success. It's the only thing I dislike about this phone. Custom Roms will eventually fix it even if OnePlus doesn't.
Delta 32 said:
Hi, like the title says. I tried Notification Slider by Seveilith, but it doesn't seem to work on the 3T. More specifically i just want completely silent on one (excluding alarms), vibrate (excluding alarms) on another, and normal ringing on the last. I don't care about priority settings or those kinds of things. But I don't really want to root (I don't miss much), since I'd lose OTA.
Click to expand...
Click to collapse
Isn't that exactly what you have now? This is how mine works:
Upper: Vibrate only.
Middle: DND, alarms only.
Lower: Normal, ringtone + vibration.
mekanismen said:
Isn't that exactly what you have now? This is how mine works:
Upper: Vibrate only.
Middle: DND, alarms only.
Lower: Normal, ringtone + vibration.
Click to expand...
Click to collapse
Upper is not viable only. It's silent
c_86 said:
Upper is not viable only. It's silent
Click to expand...
Click to collapse
Well you can change that pretty easily by going to the slider settings.
Settings > Alert Slider > Silent > Enable Vibration
I miss vibrate mode only too. I hope there is coming a app or xposed module.
Schrotty35 said:
I miss vibrate mode only too. I hope there is coming a app or xposed module.
Click to expand...
Click to collapse
Yes and no
Sure you can turn in vibration but everything else is silent then. Example. If I put my slider in upper I get NO notifications to my android Wear. None at all.
c_86 said:
Yes and no
Sure you can turn in vibration but everything else is silent then. Example. If I put my slider in upper I get NO notifications to my android Wear. None at all.
Click to expand...
Click to collapse
That's kind of strange. I feel like that's more what DND is supposed to do. I guess you could always enable the "silence phone when watch is connected"-setting in Android Wear as a workaround.
mekanismen said:
Isn't that exactly what you have now? This is how mine works:
Upper: Vibrate only.
Middle: DND, alarms only.
Lower: Normal, ringtone + vibration.
Click to expand...
Click to collapse
When I set the middle one, it seems like it can't turn down ring to zero, the lowest it will go is one step before. This leads me to think they don't want it to be completely silent/only vibrate. I can't take a screenshot because it keeps disappearing when I do the three finger swipe, but try it.
Delta 32 said:
When I set the middle one, it seems like it can't turn down ring to zero, the lowest it will go is one step before. This leads me to think they don't want it to be completely silent/only vibrate. I can't take a screenshot because it keeps disappearing when I do the three finger swipe, but try it.
Click to expand...
Click to collapse
That's only because it defaults to changing the alarm volume in DND mode.

Categories

Resources