Database Develop

Matte Screen Protector for ZR

Hi all !
I just bought THIS screen protector and just loving it.
I was worried about the fitting to the screen but the precision laser cut was very accurate, fits exactly to the screen.
I applied it myself for the first time, it is magnetic(does not leave adhesive residue) so you can always remove apply it correctly. The matte finish is just excellent
It is for Indian users but the seller said they import these from abroad so the same brand can be found on international sites too.

I got a clear screen protector and i like it better than matte finish.

george101 said:
I got a clear screen protector and i like it better than matte finish.
Click to expand...
Click to collapse
1) can anybody show a side-to-side comparison of matte and clear protectors applied?
2) are the aftermarket protectors better than the sony stock protector?

Hi guys, just got my ZR and I'm loving it but it's quite the fingerprint magnet. Is there a screen protector that can help. I have set my eyes on this one http://www.ebay.co.uk/itm/Vikuiti-A...ting_LaptopAccessories_RL&hash=item51b125bc05 but I don't know if it's any good. Any suggestions?

andes83 said:
Hi guys, just got my ZR and I'm loving it but it's quite the fingerprint magnet. Is there a screen protector that can help. I have set my eyes on this one but I don't know if it's any good. Any suggestions?
Click to expand...
Click to collapse
I buy a 3pack of matte protection @ 3.5€ and it's just what i need!
But i cant remember the seller... Go for the cheaper (3pack is good if ou miss something during the assembly)

bismouth said:
I buy a 3pack of matte protection @ 3.5€ and it's just what i need!
But i cant remember the seller... Go for the cheaper (3pack is good if ou miss something during the assembly)
Click to expand...
Click to collapse
Thank you, for your suggestion I got 3 matte and 6 clear screen protectors I will see how it goes and which I like best. Has anyone removed the pre-installed protector from their device. I'm concerned that I'll remove the SONY logo if I get rid of it (I hear that happened on xperia Z units). Is there any danger in removing it and should I remove it at all or just place the new one on top of it?

Place the new one on top. Doesn't dampen sensitivity too much.
Sent from my C5502 using Tapatalk 4

matte
At first didn't like my matte screen protector...
Pros
feels nicer!
no filthy finger prints!
minimal light reflections..
if you use dim backlight it really helps..
you can re apply it.
no air bubbles at all!
Cons
unable to use it as a mirror when screen off.
colours and images on the screen are not as sharp,
slight glow on whites.
But now i wouldn't go back!

I'm still waiting for my screen protector and today I noticed a tiny scratch on the screen. It's not that visible but is there a way to fix that. Will the screen protector cover it or I'm stuck with a scratched SONY?

andes83 said:
I'm still waiting for my screen protector and today I noticed a tiny scratch on the screen. It's not that visible but is there a way to fix that. Will the screen protector cover it or I'm stuck with a scratched SONY?
Click to expand...
Click to collapse
Take a pencil eraser and rub it off..

It should not be the screen itself. Sony is known to apply screen protectors on each phone in-manufacture. It's not visible but if you insist you can remove it. It's even possible that the sony logo is simply printed on it, like the Xperia V.
Sent from my C5503 using xda app-developers app

Removing the anti-shatter film will invalidate the warranty.

Seriously?? How could this void the warranty? It has nothing to do with the hardware and doesn't affect the device in any way!
Made in ZR

Ilko said:
Seriously?? How could this void the warranty? It has nothing to do with the hardware and doesn't affect the device in any way!
Made in ZR
Click to expand...
Click to collapse
Yes, there are a lot users talking about it, removing the shatter-proof screen protector voids the warranty because it'll no longer be shatter proof.....stupid isn't it? I already scratched mine before knowing that, now I'm stuck with a scratched screen until my warranty ends and I remove the f****ing thing.

is this detail specified in the texts ?

Ilko said:
is this detail specified in the texts ?
Click to expand...
Click to collapse
I can't really say I haven't researched this, what I know for sure is that this protector is factory heated onto the screen and it's not supposed to be removed.

Hi,
I'm trying to find a screen protector for a whole display, without any holes in it.. I found this: amazon.de/dp/B00K1JTIMG/ but of course, I'm not sure if it's a picture of a real product or just illustrative picture. can someone confirm / recommend something else?
(sorry, posting links is blocked, since I'm new here..)

andes83 said:
I can't really say I haven't researched this, what I know for sure is that this protector is factory heated onto the screen and it's not supposed to be removed.
Click to expand...
Click to collapse
You are right. The protector is factory-heated onto the screen, remove it and the Sony logo will go off. As for the warranty, there are two paragraphs Sony could use against you if you remove the protector (as stated by the Important information brochure):
Do not paint or attempt to disassemble or modify the product. Only Sony authorized personnel should perform service.
Click to expand...
Click to collapse
Additionally, "What we will do" section, says:
7. Tampering with any of the seals on the Product will void the warranty.
Click to expand...
Click to collapse
I know it is not very specific, but hey, that's how lawyers do it.
The only thing I always wonder about, is what kind of glass ZR's screen uses... GorillaGlass? DragonTrail? I found many different sites talking about that, but none of them had conclusive evidence. Sony's official response is ZR uses a "Shatter proof and scratch-resistant glass". No specific brand mentioned .
Anyway, I bought a good protector for 5 bucks. It's a "KLX Anti-explosion Soft TPU 0.2mm Screen Guard Film" and the package includes everything you need to apply it successfully. Also, I saw a 1mm tempered glass protector for 15 bucks, thinking of buying it next time.

[Q] screen protector for lumia 930/icon

Has anyone used a tempered glass screen protector for this phone, I know it doesn't cover the whole screen, just wanted to know what people think about it. I've already ordered 3 pieces from different suppliers to see the differences, and whether it goes well on the phone.

id be interested to know if you get a good 1 cause ive bought the mobilefun version and it failed bad i got a full refund within 10mins of applying it. so cross that off your list lol

a3ads said:
id be interested to know if you get a good 1 cause ive bought the mobilefun version and it failed bad i got a full refund within 10mins of applying it. so cross that off your list lol
Click to expand...
Click to collapse
I have a few coming in during the next few day, I will try them out and give you some feedback, it's hard to use PET after many years of using a glass protector, so I have to try it out.
do you still have the protector, can you post a photo of it.
thanks

thanks, a good idea will be to provide some info on were u got em and i will have a look into getting some different ones and trying them out. right now ive bought "3x Vikuiti™ MySafeDisplay Screen Protector DQCT130 from 3M for Nokia Lumia 930" from "protectionfilms24" these work well enough but would love to have glass as ive got it on my other devices! thnx

a3ads said:
thanks, a good idea will be to provide some info on were u got em and i will have a look into getting some different ones and trying them out. right now ive bought "3x Vikuiti™ MySafeDisplay Screen Protector DQCT130 from 3M for Nokia Lumia 930" from "protectionfilms24" these work well enough but would love to have glass as ive got it on my other devices! thnx
Click to expand...
Click to collapse
I get them all from china, from some of the suppliers.
once i'll posted the results, and if it's positive, i'll see if I can ask the supplier or shop to put some online.

Update
Apprently I received the 3 glass protectors today, and i'm completely disappointed with them, it seems like glass protectors are out, i'm using my old pet A.R.M station one now which seems to fit the best so far, apart from the sides about 3 mm, the whole of the surface is covered, may be i'll try something like invisible shield next.
There isn't point in posting photo's, it's a waste of time.:fingers-crossed:

kms108 said:
Update
Apprently I received the 3 glass protectors today, and i'm completely disappointed with them, it seems like glass protectors are out, i'm using my old pet A.R.M station one now which seems to fit the best so far, apart from the sides about 3 mm, the whole of the surface is covered, may be i'll try something like invisible shield next.
There isn't point in posting photo's, it's a waste of time.:fingers-crossed:
Click to expand...
Click to collapse
Thanks for the experience anyways.
I'd also say get one with wet apply, if you live in europe Invisishields are by far the best I think, at least in Germany others like Skinomis are really expensive to ship. I got myself an Invisishield, and it's really good so far. It covers up the whole area, except for an extremely tiny part which is good since it doesn't get loose on the edges. The only thing I don't really like about it is the feel, it's a bit rubbery, but I guess that's due to the type and in normal use it doesn't really bother me.

th0mas96 said:
Thanks for the experience anyways.
I'd also say get one with wet apply, if you live in europe Invisishields are by far the best I think, at least in Germany others like Skinomis are really expensive to ship. I got myself an Invisishield, and it's really good so far. It covers up the whole area, except for an extremely tiny part which is good since it doesn't get loose on the edges. The only thing I don't really like about it is the feel, it's a bit rubbery, but I guess that's due to the type and in normal use it doesn't really bother me.
Click to expand...
Click to collapse
I've actually used invisibleshield before, the rubbery surface will wear out, and it will discolour overtime, but it's our only option for better protection.
Off topic Q: have you used the official flip case CP-637, i'm interested in the green one to compliment my green phone, but thinking the green will get very dirty quickly, so do you think the black is a better option.

checking out a few screen protectors from ebay
invisble phone guard
front and back and sides USD 19
extreme guard
front and back USD 10
screenknight
front and back USD 14.50
not available from invisible shield.
they are all very cheap, do you know if they are all the same.
update:
I got the xtreme guard from their site, it was more expensive at USD 10.99, then shipping on top which was about USD 6, from ebay it's USD 10 with shipping, but found on the internet a 85% off discount, so I purchased 2 sets which adds upto USD 9.17.
good saving

shockproof case for letv x800

Hello!
After droping my awesome phone on concrete and getting a cracked screen (ordered replacement+tools+custom sticker with double sided adhesive tape) i thought it would be good to get serious protection so I found this on aliexpress: http://www.aliexpress.com/item/Dual..._9&btsid=eb99811d-23ea-49e1-b393-8c7a499fd83f
I am not sure if it's compatible with x800 - judging by the pictures it's not - but the seller assured me it is compatible. Maybe seller posted wrong photos - I hope!
Anyway I will get back on this to tell you all if it's OK.
In the mean time I found another one which seems to offer a decent level of protection (ordered it too): http://www.aliexpress.com/item/HC02..._9&btsid=18405c4f-0d4e-4585-b965-d67ca7d557e3
So fellow owners of x800.. take good care of your phones - they are very fragile.. the screen at least.

Later edit.. thanks to user nitalium for posting links with screen replacement. Those were very useful as I learned what to order and how to repair my phone.

leonard.pop said:
Hello!
After droping my awesome phone on concrete and getting a cracked screen (ordered replacement+tools+custom sticker with double sided adhesive tape) i thought it would be good to get serious protection so I found this on aliexpress: http://www.aliexpress.com/item/Dual..._9&btsid=eb99811d-23ea-49e1-b393-8c7a499fd83f
I am not sure if it's compatible with x800 - judging by the pictures it's not - but the seller assured me it is compatible. Maybe seller posted wrong photos - I hope!
Anyway I will get back on this to tell you all if it's OK.
In the mean time I found another one which seems to offer a decent level of protection (ordered it too): http://www.aliexpress.com/item/HC02..._9&btsid=18405c4f-0d4e-4585-b965-d67ca7d557e3
So fellow owners of x800.. take good care of your phones - they are very fragile.. the screen at least.
Click to expand...
Click to collapse
For 2nd item already have but if u apply tempered glass, it will not fitted..

leonard.pop said:
Hello!
After droping my awesome phone on concrete and getting a cracked screen (ordered replacement+tools+custom sticker with double sided adhesive tape) i thought it would be good to get serious protection so I found this on aliexpress: http://www.aliexpress.com/item/Dual..._9&btsid=eb99811d-23ea-49e1-b393-8c7a499fd83f
I am not sure if it's compatible with x800 - judging by the pictures it's not - but the seller assured me it is compatible. Maybe seller posted wrong photos - I hope!
Anyway I will get back on this to tell you all if it's OK.
In the mean time I found another one which seems to offer a decent level of protection (ordered it too): http://www.aliexpress.com/item/HC02..._9&btsid=18405c4f-0d4e-4585-b965-d67ca7d557e3
So fellow owners of x800.. take good care of your phones - they are very fragile.. the screen at least.
Click to expand...
Click to collapse
For the first case on aliexpress..this is the answer from the seller 'Dear customer, do not order first. Thank you for your discovery, it is our mistakes.IT IS NOT SUITS. we are going to change it.'

rahmocook85 said:
For the first case on aliexpress..this is the answer from the seller 'Dear customer, do not order first. Thank you for your discovery, it is our mistakes.IT IS NOT SUITS. we are going to change it.'
Click to expand...
Click to collapse
well.. darn it! i will open dispute and get my money back. i was really excited about this case.
Thanks for the info rahmocook85!

leonard.pop said:
well.. darn it! i will open dispute and get my money back. i was really excited about this case.
Thanks for the info rahmocook85!
Click to expand...
Click to collapse
No problem.,..i'm using transformers silicon rubber case now
https://www.aliexpress.com/snapshot/7803311499.html?orderId=76172324771634
..more protection even it is not suits well on screen after tempered glass applied but for the edge it does....
cheers...

Thanks guys, I myself was trying to find a more robust case than the available silicone ones... and haha, they still hasn't taken off "Le One Pro X800" from the first case suggestion
I am going for the transformer type, too, although the first one would have been more to my taste.

In China I have been using this metal frame. It is of very good quality, protects the phone properly, but the downside is that the GPS signal doesn't get through as well as without. Highly suggested, except for the GPS problem.
https://item.taobao.com/item.htm?spm=a1z09.2.0.0.LFZ2iS&id=531410223896&_u=11seifcq44a8
Maybe you can find it on Aliexpress...

Surprisingly that oneplus one rugged armor tire pattern case suits very well for our Le 1 Pro..just the cons is
1)cannot use earphone if apply this case ( hole position is the same but not so deep)
2) have to press at the case a bit hard for volume & power button (just ignore it because we still can use vol up&down at settings & also double tap to wake up the screen)
3) rear camera hidden a bit but still can use
4) cannot use torch light & flash
Pros
1) can using IR blaster very well
2) shockproof case , protect your phone even u are not apply tempered glass (mine using it)
3) Speaker holes & charging port at a good position with this case (love it very much)
Now, i'm not so worried if my phone drop at the floor...cheers..

Where did u applied the double sided tape when you fixed your phone, on sides or wher?

Screen Protectors for Moto Z play

I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.

SK47007 said:
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
Click to expand...
Click to collapse
The gap is necessary.
I think all 3 Zs can use the same one, a theory of mine, not yet confirmed.
Look at the other forums.
I too am ready to buy.

as i compared tempered glasses on ebay for Z and Z Play, the difference is upper part - they both have flash and front camera but switched between models

Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?

yayo685 said:
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
Click to expand...
Click to collapse
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.

emailrob said:
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
Click to expand...
Click to collapse
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.

yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
I picked up a pair of Omoton brand tempered glass for $8 on Amazon. They are "meh" at best. First one I missed a spot of dust mid screen, tried to pull to reapply, and cracked the corner. Not totally unusual. Second one went on clean, but had 3 big bubbles - worked their way out after 3 days. Because of the 2.5d taper of the device screen, there's an unattached "ring" around the edge of the screen (maybe 2-3 mm wide) where the protector doesn't fully attach. Screen responsiveness is mildly diminished - rarely causes any serious issue, but missed touches/swipes do happen.
Tempted to pull and run naked, but it's tolerable for now and I like the added protection, since I don't have insurance.

yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
Same one as the poster above
https://www.amazon.com/gp/product/B01LY9TCL2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Two pack. Screen responsiveness seems fine, and I'm happy that the screen is safe.

try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ

drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
Please post pictures when you get the 2nd one

Does anybody know if there is a tempered glass privacy shield for Z Play? Like the ones that prevent people from seeing the screen when they look at it in an angle.

Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

drvoje said:
[...] i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:

aviwdoowks said:
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.

dplakta said:
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
Click to expand...
Click to collapse
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
brinox said:
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
Click to expand...
Click to collapse
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so

Thanks to those of you who suggested the sparin screen protectors.
Got mine a couple days ago, and installed today. Definitely a slightly smaller coverage area than the Omoton I replaced. The sparin does give me a halo of unattached edge still, but it's smaller than the omoton, and most importantly almost nonexistent on the bottom edge - so hopefully won't hook on my pocket and peel up like the omoton.
Nicely packaged, good install kit. Install went fine - 2 good sized bubbles toward one edge initially, but they both worked themselves out after a couple hours.
Screen sensitivity is a little better than with the omoton protector, but still slightly diminished from naked.
Overall, would buy again.

drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
razorsbk said:
Please post pictures when you get the 2nd one
Click to expand...
Click to collapse
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?

Iktor said:
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Click to expand...
Click to collapse
Like like that screen protector was made for the Moto Z/force, which have different bezel sizes on top and bottom than the Moto Z Play.

sorry for late reply, at that time that was best protector because it covers most of the screen and its not that expensive... i said that is made for z forse but it can fit at z play (ofc they are not same phones and its not 100% perfect but still better option then most of protectors - which have whole mic/speaker side opened)
now for camera glass protector, first of all i want to say when you install it it stays flat, you will never even notice its there
but when i installed it, dust was bellow and i did not do it right on first try, so now when i take pictures with flash turned on they become white...
now i ordered 2 more, and im expecting them to come soon, so i will install it again and i will let you know
there is no point to send you pictures because you will never know its there on camera
UPDATE for screen protector: I oredered this one, seems like best option:
http://www.ebay.com/itm/282249920491?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

aviwdoowks said:
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Click to expand...
Click to collapse
In nearly a month a cloud ☁ is still there but getting smaller each day.

WING Front Screen Case / Protector

This is only first gen., but if I had some of these available. Would anybody be interested in using these?

Made one in white so it's easier to see.

Quiets vibration

Ver 2.1.
Newer version available see videos below.

You can check out a video of how it functions here.

kaluna00 said:
You can check out a video of how it functions here.
Click to expand...
Click to collapse
Link to buy?

Steamer2499 said:
Link to buy?
Click to expand...
Click to collapse
Link is in the comments in the you tube video. Thanks! And here is a how to install video.

Link doesn't work for me... Maybe because I'm from the Philippines...

For those of you who purchased the screen protector. Please send me a message if you need a replacement. I'll work on getting it to you as cheap as possible. Thanks.

Hello everybody in an effort to continually improve. I have come up with some design improvements. Some of the items addressed were preventing snagging in pockets, and reducing the webbing thickness by 0.1 mm

Just ordered mine today! Thanks.

Hey everyone. 3.1 revision is out.
Cheers!

I think I have it set up now on ebay to accept international orders. heads up.
Cheers.

How is drop protection?

foehammer1982 said:
How is drop protection?
Click to expand...
Click to collapse
Hard to quantify... I've had reports of it saving the phone from an 8 foot fall onto concrete... The case needed replacing, but the phone was not damaged.

I got this case, i must say tho this really does protect the front screen. I didn't expect that a case is possible for the front screen.
Now, the problem with this case is the material. It's made from hard plastic, if left too long on the phone it unfortunately left a dent mark on the front screen frame.
If another version is made, it should use different, softer material.

t040484 said:
I got this case, i must say tho this really does protect the front screen. I didn't expect that a case is possible for the front screen.
Now, the problem with this case is the material. It's made from hard plastic, if left too long on the phone it unfortunately left a dent mark on the front screen frame.
If another version is made, it should use different, softer material.
Click to expand...
Click to collapse
Hey there. Would you be able to send me a picture of what you are talking about? I've been using this screen protector since December 2020 and have not experienced that problem.
The plastic case should not dent body or front screen of the phone. I would think only an impact would do something like that.
In other news... I am working on the Prototype with a different material.

kaluna00 said:
Hey there. Would you be able to send me a picture of what you are talking about? I've been using this screen protector since December 2020 and have not experienced that problem.
The plastic case should not dent body or front screen of the phone. I would think only an impact would do something like that.
In other news... I am working on the Prototype with a different material.
Click to expand...
Click to collapse

Thanks for the picture. Surprising. Thanks again for sharing.