Database Develop

Screen glued to front glass?

One of the things i loved by my (now sold) iphone 4, is that the screen is glued to the frontglass. This prevents dust from ever getting inn the screen. I really hate dust in the screen.
Do the optimus 2x glue the screen to the glass?? Anyone know.

I don't know about the O2X, but all the android phones I've had over the last few years have NEVER had dust under the screen/glass.

Same.
Never had dust under the screen on my Nexus but i did on my G1 (only because it was falling apart and i'd messed with the insides too much )
So far no dust or anything under the screen, but i did notice that the very small groove that runs around the edge between the phone and the silver band collects ALOT of dust which is kinda hard to get rid of.
Overall though, this phone has the best build quality of any i've ever owned!

Same over here, no dust.

I don't think you should be worried about this. The screens on newer devices are quite well sealed. No dust should be able to get in there. And yes, you will get dirt build up on the grooves along the outer edge but that's quite unavoidable and can be cleaned with a really small pin.

I have 1 small spec of dust in the lower left corner of my screen (only visible when light shines directly on the screen).
but this could be from manufacture
My HTC desire had a build up of dust down the left hand side of the screen due to a faulty seal around the glass

I had 2 with dust under screen. and by that I dont know if with time it gets more dust, or its just at assembly.

if the screen was glued wouldnt that be bad if the screen cracks?

carlos118 said:
if the screen was glued wouldnt that be bad if the screen cracks?
Click to expand...
Click to collapse
True, but thank god we have gurrilaglass!
Sent from my LG-P990 using XDA App

carlos118 said:
if the screen was glued wouldnt that be bad if the screen cracks?
Click to expand...
Click to collapse
The glue is easy to get rid of with some heat. So no problem if it cracks or you have to change a scratched one.

xmoo said:
thank god we have gurrilaglass!
Click to expand...
Click to collapse
Just have a look at my phone
LG Optimus 2X, gorilla glass: youtube.com/watch?v=bOZS36hq1s4

EasyWorld said:
Just have a look at my phone
LG Optimus 2X, gorilla glass: youtube.com/watch?v=bOZS36hq1s4
Click to expand...
Click to collapse
Gorilla glass doesn't mean it can't be breaked, but it won't break that easy.

xmoo said:
Gorilla glass doesn't mean it can't be breaked, but it won't break that easy.
Click to expand...
Click to collapse
The impact wasn't really hard at all and still... you can see the result. As far as I understand, gorilla glass means it won't SCRATCH (not break) that easy.

EasyWorld said:
The impact wasn't really hard at all and still... you can see the result. As far as I understand, gorilla glass means it won't SCRATCH (not break) that easy.
Click to expand...
Click to collapse
i got two scratches and I have no idea how i even got them :-(

Gorilla glass is just a hype. It scratches as easy as all other glasses.
I just wonder if it's GLUED to the screen or not. Not if it scratches.

Fenrisulven_ said:
I just wonder if it's GLUED to the screen or not.
Click to expand...
Click to collapse
It is glued. I went to the repair shop a couple of days ago to find out whether they could replace the broken glass on my phone. They highly recommended replacing the glass together with the display as one unit because, as they said, the glass is glued to the dislay and replacing just the glass is not only pretty difficult but can also result in dust getting between the glass and the display.

EasyWorld said:
It is glued. I went to the repair shop a couple of days ago to find out whether they could replace the broken glass on my phone. They highly recommended replacing the glass together with the display as one unit because, as they said, the glass is glued to the dislay and replacing just the glass is not only pretty difficult but can also result in dust getting between the glass and the display.
Click to expand...
Click to collapse
well.. i am thinking to change my screen because it has light leakage. " imported, so if to return it back it would cost me like 100$ at least plus whatever tax. so replace the screen from my own pocket is cheaper "
and i dont mind that BUT. where can i buy the screen with the front glass together ?
i dont want to buy the screen alone. does anyone have a good website where we can buy parts?

ll_l_x_l_ll said:
well.. i am thinking to change my screen because it has light leakage. " imported, so if to return it back it would cost me like 100$ at least plus whatever tax. so replace the screen from my own pocket is cheaper "
and i dont mind that BUT. where can i buy the screen with the front glass together ?
i dont want to buy the screen alone. does anyone have a good website where we can buy parts?
Click to expand...
Click to collapse
I you want to find a LCD without leakage you need to look forever. All LCD's has some kind of leakage.

Fenrisulven_ said:
I you want to find a LCD without leakage you need to look forever. All LCD's has some kind of leakage.
Click to expand...
Click to collapse
not true.
well.. it might be the case for the optimus 2x but not all phones lol.

ll_l_x_l_ll said:
not true.
well.. it might be the case for the optimus 2x but not all phones lol.
Click to expand...
Click to collapse
Yes all. Even the mighty iphone ;-) and just google ipad 2 light bleed. Lol
Sent from my LG-P990 using Tapatalk

Xperia T - Out of stock

To the proud owners of Xperia T, does the phone come with a factory installed screen protector...
Your reply will help me to save the cost of ordering an additional screen protector...

yes it does

Yes, and the first thing I do is rip it off and don't bother with any, I find screen protectors attract dust and get to easily scratched whilst the main screen is very robust and doesn't get scratched at all....I have done this with all my xperia devices.
Sent from the future on my Star Trek communicator.
Sent from my LT30p using XDA premium.

gregbradley said:
Yes, and the first thing I do is rip it off and don't bother with any, I find screen protectors attract dust and get to easily scratched whilst the main screen is very robust and doesn't get scratched at all....I have done this with all my xperia devices.
Click to expand...
Click to collapse
LOL...i do exactly the opposite....I use a screen protector but I dont like to put any case on it, as it spoils the aethetics. And to why I use screen protector is, because a scratch on the screen will keep bothering me, even though it wouldnt affect the usage...
BTW, factory installed screen protector from sony are quite good imo.
Thanks Greg and Asterix...
Going to order my Xperia T

shahulvm said:
LOL...i do exactly the opposite....I use a screen protector but I dont like to put any case on it, as it spoils the aethetics. And to why I use screen protector is, because a scratch on the screen will keep bothering me, even though it wouldnt affect the usage...
BTW, factory installed screen protector from sony are quite good imo.
Thanks Greg and Asterix...
Going to order my Xperia T
Click to expand...
Click to collapse
I dont use a case either...I have never had any problem with a scratched screen.

and how's the best way to remove it? It's very difficult, no?

dd66 said:
and how's the best way to remove it? It's very difficult, no?
Click to expand...
Click to collapse
No, just get your fingernail under it near the top centre and pull it off, its a bit more sticky than non-factory fitted screen proteceters, but it does just pull off

Have just ordered mine, and it was the last piece in stock at Clove Technologies....
Should be recieving tmrw in Singapore...
Does anybody have some opinion on the camera app and picture quality difference between Stock and AOSP camera apps...

[Q]are you have screen shields placed by factory originaly?!!!

hi bros
what is this screen shields on both of the phone surfaces??!!!
i bought this phone yesterday!!!but i noticed phone is covered with two clear layer like as screen protectors on both sides!!!on the back side it has a square paper label something like as a mark!!!i dont know what is this ?can i remove this shields?unless phone isnt made with drugonglass???so what is this shields???are you have this sheets on your phone originaly???
tnx

babakmaham said:
hi bros
what is this screen shields on both of the phone surfaces??!!!
i bought this phone yesterday!!!but i noticed phone is covered with two clear layer like as screen protectors on both sides!!!on the back side it has a square paper label something like as a mark!!!i dont know what is this ?can i remove this shields?unless phone isnt made with drugonglass???so what is this shields???are you have this sheets on your phone originaly???
tnx
Click to expand...
Click to collapse
Yeah mine came with both. I think everyone has them.
Some people removed them, but some people say they help with the strength of the glass.
I took my front one off because it got some marks on it... Seems fine without it.
I say: Leave them on until they get damaged (which seems quite easy)

adamryd said:
Yeah mine came with both. I think everyone has them.
Some people removed them, but some people say they help with the strength of the glass.
I took my front one off because it got some marks on it... Seems fine without it.
I say: Leave them on until they get damaged (which seems quite easy)
Click to expand...
Click to collapse
Tnx
This means drugonglass is under the shields?is this true?!!!
Sent from my C6602 using Tapatalk 2

adamryd said:
Yeah mine came with both. I think everyone has them.
Some people removed them, but some people say they help with the strength of the glass.
I took my front one off because it got some marks on it... Seems fine without it.
I say: Leave them on until they get damaged (which seems quite easy)
Click to expand...
Click to collapse
You removed the front one? Did the Sony logo still stick on the phone? or it's embedded on the screen protector??

AW: [Q]are you have screen shields placed by factory originaly?!!!
xiaopai89 said:
You removed the front one? Did the Sony logo still stick on the phone? or it's embedded on the screen protector??
Click to expand...
Click to collapse
Afaik the Sony logo is on the preinstalled shatterproof protectors and will disappear when removing the front one.

it seems,not only this protectors increases dust absorption and finger print but also is getting a feel of lost slip on screen when i want to sweep between the pages.i think is better to remove this shields if it is possible and dont injury knocks the screen

my q is why sony should be placed these protectors even with using drugonglass in z?!!!is this can a reason for worse viewing angle on xperia z?!!!

Retxud said:
Afaik the Sony logo is on the preinstalled shatterproof protectors and will disappear when removing the front one.
Click to expand...
Click to collapse
are you sure this?!!!!

AW: [Q]are you have screen shields placed by factory originaly?!!!
babakmaham said:
are you sure this?!!!!
Click to expand...
Click to collapse
From what has been posted here, yes. Haven't tried it.
Sent from my C6603 using xda app-developers app

Retxud said:
From what has been posted here, yes. Haven't tried it.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
who is tried this? i want to peel off these sheets but scare for SONY logo off.

Retxud said:
From what has been posted here, yes. Haven't tried it.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
I removed mine and the sony logo is still there, im guessing the logo is underneath the glassitself...

mihajaru said:
I removed mine and the sony logo is still there, im guessing the logo is underneath the glassitself...
Click to expand...
Click to collapse
good news for me.thanks.can u explain me what is changed after removing ?

I removed back and front, phone looks and feels awful now, fingerprint magnet, some glue residue on the back and Sony logo was attached to the front protector.

after 2 day i sold f..k xz and came back to note 2....

biffsmash said:
I removed back and front, phone looks and feels awful now, fingerprint magnet, some glue residue on the back and Sony logo was attached to the front protector.
Click to expand...
Click to collapse
C6603:
removed front and back covers. Less fingerprints and better viewing angles for me! :good:
:angel:

exmatproton said:
C6603:
removed front and back covers. Less fingerprints and better viewing angles for me! :good:
:angel:
Click to expand...
Click to collapse
Then you're very lucky as the back of mine looks like a multicolored rainbow of oil slick after a few mins use.
Did you lose the Sony logo off the front? If you didn't you likely just removed the second screen protectors and left the shatter proof factory ones on.
Mines almost unusable now as the fingerprints are worse than any phone I've ever owned.
Viewing angles remain unchanged from removing the protectors, you shouldn't spread false info as there will be a lot of unhappy campers removing their protectors and seeing zero viewing angle difference.

I think you'd better not peel them off. These coverings are designed to prevent broken glass splinters hurting people, and hard and stuck very tight with special method in factory. It won't affect display I suppose, trust Sony. It's part of the device. Moreover, since it scratches easily, add one more film on it...

warranty
not sure if removing sony anti-shatter foils does also remove warranty...as you are given foils also in package, maybe read somewhere on XDA

I do not understand why people remove these...
- When NOT removed and If you drop the phone, it prevents the glass splinters from shattering all over the place.
- When removed Sony can no longer guarantee the phone to be water proof, as stated in another topic.
- When removed the phone attracts more fingerprints.
- When removed you lose the Sony logo on the front.
As far for these scratching a lot, I have not put on any extra screen protector and do not have a single scratch yet.
However I do use a leather case, always do that with all my phones.
Used Xperia Play for 2 years aprox, not a single scratch on the pre installed film.
Kind regards, Stefan.

The dragontrail glass is only for durability purposes! DO NOT remove the shatter proof sheet, it protects the screen from drop shocks so it doesn't get broken! Use the supplied screen protector and you will be fine! Unfortunately here in Greece it ships without screen protectors in the box and damn we got the highest price! (€699)

Question about removing Xperia Z's anti-shatter film

Hi guys, just curious about this, I would like to remove the front screen protector of Xperia Z to get rid of the Sony logo (not hate it put prefer the front to be all black). Would this affect the phone's water resistant feature?
Have anyone tried this yet?
Besides, is the oleophobic coating of the glass affected? From the video below I think there's something wrong with his phone, the reflection looks pixelated

silversun92 said:
Hi guys, just curious about this, I would like to remove the front screen protector of Xperia Z to get rid of the Sony logo (not hate it put prefer the front to be all black). Would this affect the phone's water resistant feature?
Have anyone tried this yet?
Besides, is the oleophobic coating of the glass affected? From the video below I think there's something wrong with his phone, the reflection looks pixelated
Click to expand...
Click to collapse
I have done it and it doesnt affect water resistant feature (its a film how can it affect the whole phone?)
the screen have little to no oleophobic feature, your best bet is to buy some rain-x spray it on there or buy another screen protector that have oleophobic property.

I'd leave it alone for the simple reason you'll regret it. I don't see how you could remove it, you can cover it over in some way but it's not going to look good and would be noticeable from certain angles.

XperienceD said:
I'd leave it alone for the simple reason you'll regret it. I don't see how you could remove it, you can cover it over in some way but it's not going to look good and would be noticeable from certain angles.
Click to expand...
Click to collapse
What do you mean with: "I don't see how you could remove it" ?
It's just a matter of removing the sheet.

Dsteppa said:
What do you mean with: "I don't see how you could remove it" ?
It's just a matter of removing the sheet.
Click to expand...
Click to collapse
..
silversun92 said:
I would like to remove the front screen protector of Xperia Z to get rid of the Sony logo
Click to expand...
Click to collapse

XperienceD said:
..
Click to expand...
Click to collapse
The Sony logo is on the film, it peels off with it

Michealtbh said:
The Sony logo is on the film, it peels off with it
Click to expand...
Click to collapse
So it is. Still, I'd leave it, many People in the Arc section have lived to regret taking off the factory applied protector for various reasons, but, your Phone, your decision.

XperienceD said:
So it is. Still, I'd leave it, many People in the Arc section have lived to regret taking off the factory applied protector for various reasons, but, your Phone, your decision.
Click to expand...
Click to collapse
Lol, i have no regrets soo far, well hey, if the screen breaks.. It breaks

nazrin313 said:
Lol, i have no regrets soo far, well hey, if the screen breaks.. It breaks
Click to expand...
Click to collapse
It's scratches I'd be more concerned about, which is why I always stick one on top of the factory one because if or when I come to sell it, a pristine screen will get more than one that's scuffed to bits.

XperienceD said:
It's scratches I'd be more concerned about, which is why I always stick one on top of the factory one because if or when I come to sell it, a pristine screen will get more than one that's scuffed to bits.
Click to expand...
Click to collapse
Thats the reason i removed it, it had tons of scratches...now im using the clarivue sp with the added bonus of the face w/o the Sony logo... Looks pretty slick if u ask me

nazrin313 said:
Thats the reason i removed it, it had tons of scratches...now im using the clarivue sp with the added bonus of the face w/o the Sony logo... Looks pretty slick if u ask me
Click to expand...
Click to collapse
Get some pics up.

XperienceD said:
Get some pics up.
Click to expand...
Click to collapse
Sorry about the bad quality as Im just using my lappy's camera lol as I dont have another camera handy.
There are another nice high quality pics around in this forum with the sheet removed....the phone with just a blank shiny and black face is just too sexy

Took the film back too?

BR4DOKYBrazil said:
Took the film back too?
Click to expand...
Click to collapse
Yeap, both were all scratched up..dats the reason i removed it at the first place

XperienceD said:
It's scratches I'd be more concerned about, which is why I always stick one on top of the factory one because if or when I come to sell it, a pristine screen will get more than one that's scuffed to bits.
Click to expand...
Click to collapse
it wont scratch, it'll break but wont scratch, I had my S3 in my pocket with keys and coins (not intentionally but when in a rush) it never scratch, Dragontrail suppose to be stronger than Gorilla Glass 2 so it be ok.

G1_enthusiast said:
it wont scratch, it'll break but wont scratch, I had my S3 in my pocket with keys and coins (not intentionally but when in a rush) it never scratch, Dragontrail suppose to be stronger than Gorilla Glass 2 so it be ok.
Click to expand...
Click to collapse
IT WILL SCRATCH.
IT WILL BREAK AND IT WILL SCRATCH.
My previous xperia z had antishatter removed and the screen scratched from a sand particle hidden in my microfibre cloth, if you decide or have taken of antishatter film, put on a screen protector as soon as you can. Preferably you should put on a good quality screen protector onto antishatter film. That way you will have constant new looking phone.
Which is what I've done with my NEW Xperia z.
after taking off antishatter layer on my first phone, AIthough i was trying to convince myself that it feels better, and looks better debranded,
Everytime the beautiful nostalgic sony ad came on, and the guy took out his xperia z to take a picture of his girlfriend covered in courfull dry paint. And then washed his xperia z afterwards showing off that beautiful sony logo. My heart would sink ,as I knew my phone would never look like that ever again.
Sent from my C6603 using xda app-developers app

nazrin313 said:
Yeap, both were all scratched up..dats the reason i removed it at the first place
Click to expand...
Click to collapse
The logo "Xperia" and other information on the back does not go out after removing the film?

BR4DOKYBrazil said:
The logo "Xperia" and other information on the back does not go out after removing the film?
Click to expand...
Click to collapse
No
Sent from my C6603 using xda premium

I took mine off and im kinda regretting it. Its a fingerprint magnet now and the screen isnt as smooth as i thought it'd be! it kinda feel sticky and way too many dust gets on it easily and i found a tiny scratch on my screen now gonna have to go get a new screen protector tomorrow

Phat-T said:
I took mine off and im kinda regretting it. Its a fingerprint magnet now and the screen isnt as smooth as i thought it'd be! it kinda feel sticky and way too many dust gets on it easily and i found a tiny scratch on my screen now gonna have to go get a new screen protector tomorrow
Click to expand...
Click to collapse
Yeap, i put an oleo sp straight on after i removed it

Screen Protectors for Moto Z play

I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.

SK47007 said:
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
Click to expand...
Click to collapse
The gap is necessary.
I think all 3 Zs can use the same one, a theory of mine, not yet confirmed.
Look at the other forums.
I too am ready to buy.

as i compared tempered glasses on ebay for Z and Z Play, the difference is upper part - they both have flash and front camera but switched between models

Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?

yayo685 said:
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
Click to expand...
Click to collapse
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.

emailrob said:
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
Click to expand...
Click to collapse
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.

yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
I picked up a pair of Omoton brand tempered glass for $8 on Amazon. They are "meh" at best. First one I missed a spot of dust mid screen, tried to pull to reapply, and cracked the corner. Not totally unusual. Second one went on clean, but had 3 big bubbles - worked their way out after 3 days. Because of the 2.5d taper of the device screen, there's an unattached "ring" around the edge of the screen (maybe 2-3 mm wide) where the protector doesn't fully attach. Screen responsiveness is mildly diminished - rarely causes any serious issue, but missed touches/swipes do happen.
Tempted to pull and run naked, but it's tolerable for now and I like the added protection, since I don't have insurance.

yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
Same one as the poster above
https://www.amazon.com/gp/product/B01LY9TCL2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Two pack. Screen responsiveness seems fine, and I'm happy that the screen is safe.

try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ

drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
Please post pictures when you get the 2nd one

Does anybody know if there is a tempered glass privacy shield for Z Play? Like the ones that prevent people from seeing the screen when they look at it in an angle.

Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

drvoje said:
[...] i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:

aviwdoowks said:
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.

dplakta said:
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
Click to expand...
Click to collapse
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
brinox said:
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
Click to expand...
Click to collapse
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so

Thanks to those of you who suggested the sparin screen protectors.
Got mine a couple days ago, and installed today. Definitely a slightly smaller coverage area than the Omoton I replaced. The sparin does give me a halo of unattached edge still, but it's smaller than the omoton, and most importantly almost nonexistent on the bottom edge - so hopefully won't hook on my pocket and peel up like the omoton.
Nicely packaged, good install kit. Install went fine - 2 good sized bubbles toward one edge initially, but they both worked themselves out after a couple hours.
Screen sensitivity is a little better than with the omoton protector, but still slightly diminished from naked.
Overall, would buy again.

drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
razorsbk said:
Please post pictures when you get the 2nd one
Click to expand...
Click to collapse
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?

Iktor said:
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Click to expand...
Click to collapse
Like like that screen protector was made for the Moto Z/force, which have different bezel sizes on top and bottom than the Moto Z Play.

sorry for late reply, at that time that was best protector because it covers most of the screen and its not that expensive... i said that is made for z forse but it can fit at z play (ofc they are not same phones and its not 100% perfect but still better option then most of protectors - which have whole mic/speaker side opened)
now for camera glass protector, first of all i want to say when you install it it stays flat, you will never even notice its there
but when i installed it, dust was bellow and i did not do it right on first try, so now when i take pictures with flash turned on they become white...
now i ordered 2 more, and im expecting them to come soon, so i will install it again and i will let you know
there is no point to send you pictures because you will never know its there on camera
UPDATE for screen protector: I oredered this one, seems like best option:
http://www.ebay.com/itm/282249920491?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

aviwdoowks said:
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Click to expand...
Click to collapse
In nearly a month a cloud ☁ is still there but getting smaller each day.