[Q] problem with odin??? - Samsung Galaxy Mini

hi guys i own this device since february 2012 i think but i never had problems installing various roms and using odin.
yesterday i wanted to install xwktu stock firmware using odin but when it finishes i get a bootloop :/ the strangle thing is that xwktu firmware is the only not working!!! all othr stock firmwares are working well.already tried using mobile odin and redownloading the firmware... any help?

After flashing try wiping data from recovery

already tried still bootloop

Related

[Q] No range

Once after restarting my galaxy s i9000 i could not get phone signal. I reinstalled eclair with odin and it worked properly. then using clockwork recovery and returning back to doc 5.1 the phone signal is still not there. tried dark's 7.0 too. with the same result no phone signal. any help is appreciated
Since you recovered all settings went back.i had this once.maybe try to flash a modem file with odin,no repartition and no pit clicked.
Sent from my GT-I9000 using XDA App
I did not revert back to my old settings. I checked re partition and installed eclair. Then i flashed doc 5.1 without restoring my settings. Plus i tried to manually push modem.bin file using odin. No result
Can you check if you Flight mode is working or gets stuck?If it gets stuck then there is something wrong with modem version.When it happened to me i had to flash a 2.2 modem to get it to work.
Yes my flight mode did get stuck. But i tried installing new XXJPY firmware's modem through clockwork recovery and still same result. Which one did you flash? Plus my baseband version is unknown in the settings app.
I was on stock JPU at that time,i had flashed it through Odin and by mistake i had not clicked Modem and flashed without it while i was at work.Then i got home and didnt have JPU there but had JPA so i though,wtf,it was on factory reset anyway(after i had a major brick) and flashed the JPA modem on its own,no pit,not repartition,did a factory reset again,clear cache and it worked.Hope it fixes yours too.
Tried that too. Still the same. No difference. I am getting the range in eclair but not in custom firmwares. Plus the baseband is unknown

galaxy s restarting badly on custom and latest stock rom, any fix?

hi, guys i recently bought a galaxy s orange branded on 2.2.1 firmware.
on orange firmware phone kept restarting and on custom roms with correct kernals kept restarting
i flashed lastest 2.3.3 from samfirmware.com via odin with all files, repartition to clear system but still restarting.
is there a faulty orange batch/ download mode and 3 buttons all working on initial orange stock and still working
plus phone was factory reset after flashes via shortcode, and memories formated via settings.
going to try with various microsd and without microsds
anyone any ideas.
I think its bug with jvh kernel,
Sent from my GT-I9000 using XDA App

Unable to to write factoryfs using odin -im' stuck

I sucessfully installed MIDNOTE2.0 but for a reason (switching off by itself) i wanted to return to my stock rom.
so when i tried to flash it using Odin it got stopped on factory.fs and says Failed!!
using odin i flashed the pda file "CF-Root-I9220_ZC_OZH_LP1-v5.2-CWM5" so i got recovery .. then again flashed it with the kernel "CF-Root-SGN_XX_XEN_KJ4-v5.0-CWM5.tar"
so when i try to install the stock rom using cwm its alwasy aborting & when i use odin the same thing happened : failed to write factoryfs
Please Help
[email protected] said:
I sucessfully installed MIDNOTE2.0 but for a reason (switching off by itself) i wanted to return to my stock rom.
so when i tried to flash it using Odin it got stopped on factory.fs and says Failed!!
using odin i flashed the pda file "CF-Root-I9220_ZC_OZH_LP1-v5.2-CWM5" so i got recovery .. then again flashed it with the kernel "CF-Root-SGN_XX_XEN_KJ4-v5.0-CWM5.tar"
so when i try to install the stock rom using cwm its alwasy aborting & when i use odin the same thing happened : failed to write factoryfs
Please Help
Click to expand...
Click to collapse
For flashing Stock ROM use PC Odin. Not CWM..
try flashing with odin only the PIT file with repartition ticked
then reset file on odin
now factory setting shuld flashing o.k
post resaults
thanks for the reply, ive tried to flash the PIT file "u1_02_20110310_emmc_EXT4" with & without checking the re-partition, after that the same thing when I try to flash the stock ROM (PC Odin) : fails to write factoryfs.img.
Just to make things clear when I flash a stock rom i load it in BOOTLOADER anwhen i flash the kernel only i load it in PDA
Please before flashing any ROM read all instruction mentioned in thread.
And if you flashing via PC Odin, Select .md5 file in PDA Tab. not in boot loader.
You shouldnt be putting anything in bootloader ideally....
Try and get a one file tar that you put into pda.
Sent from my GT-N7000 using Tapatalk
I tried the PDA ... same thing
I dont want to confuse u guys with me but i have a feeling that something is wrong
with the internal storage ?
Thanks All for trying to help
Succeeded
really thank u all for the help, as I was doubting in my last post about the internal memory, i think the problem was from the first PTT file "u1_02_20110310_emmc_EXT4.pit" but just know i was googlin on ptt files i found this file "Q1_20110914_16GB.pit" so after using this PTT with the re-partition checked i flashed the stock rom Successfully !!
Just to let you know how fool i was : my note counted 16 flashes :
still stuck in factoryfs.img
Hello.
I have Galaxy Note.
I used to have TeamRocket v1.5 installed and it would work ok.
I wanted to try a new OS so I tried to erase and wipe the data on the sd card. it took a long time so i thought it got stuck and i restarted my phone, since then I cannot use odin to install full roms.
what I am able to do is to install CF-root CWM5 kernel and after that to copy the AbyssNote v4.2 kernel zip and to install from that CWM. that will provide CWM version 5.8.1.5
I tried using Odin3 versions 1.87 and 1.85.
I tried installing on two different windows 7 computers.
i was able to install from these same computers these same roms before.
I tried install several versions of stock roms and the Chinese rom
examples:
N7000XXKKA_N7000OXXKK5_AUT
N7000XXLA3_N7000OXALA3_OXA
N7000XXLP1_N7000OXALP1_OXA
i tried installing versions that contain only the PDA
and versions with PDA,PHONE,CSC and UMS.
I tried using the Q1 pit file: Q1_20110914_16GB.pit
I also tried to re-partition the SD card using CWM but everything provides the same results. whenever I try to install any rom it stuck at factoryfs.img
it seems like if i'll find a stock rom that can be installed with cwm it would work, but i didn't find anything like that so far.
so no matter what I do i get the same results.
please help!
thanks
Kfir
Have u flashed Angelom's Kernel V1.1 or V1.2?? or TRR V1.6??
just to confirm :
-is it stuck on factoryfs ? or u mean when it reaches factoryfs just terminating and giving FAIL in Red ?
updates
Hello.
Odin3 v1.87 doesn't terminate on factory.fs it just doesn't show any progress
anymore when it reaches factoryfs.img
I tries installing Angelom's Kernel v1.1 (I9220LP1-N7000-ICS-REPACK) but with same results. here it tries to install factoryfs.img first (not starting with cache like the stock roms) but the results are the same. no progress from there.
regarding trr 1.6. I assume you meant team rocker group. The latest version of their Rom for galaxy note that i could find is 1.5. and the docs on the forum says that it should be installed on top 1.4 and it should be installed on top of a the ICS rom. i don't have anything installed so I don't think just unpacking this rom with CWM while having a clean hard drive would work. (i may be wrong)
gonna try it anyways.. so I installed teamrocket v1.4 zip from external sd card using cwm recovery (install zip), wiped the data and restart.
welp it just shows the boot logo with a yellow triangle and that's it. does not work.
I resolved the issue by sending my phone to the cellular company. They fix it and I didn't need to pay anything. I was able to properly root my phone. Thanks
Sent from my GT-N7000 using xda premium
I sucessfully installed MIDNOTE2.0 but for a reason (switching off by itself) i wanted to return to my stock rom.
so when i tried to flash it using Odin it got stopped on factory.fs and says Failed!!
using odin i flashed the pda file "CF-Root-I9220_ZC_OZH_LP1-v5.2-CWM5" so i got recovery .. then again flashed it with the kernel "CF-Root-SGN_XX_XEN_KJ4-v5.0-CWM5.tar"
so when i try to install the stock rom using cwm its alwasy aborting & when i use odin the same thing happened : failed to write factoryfs
Please Help[/QUOTE said:
The same to you,
I had upgrade my Note to ICS 4.0.3 but when come back Stock rom 2.3.6 by Odin but unsuccessfull!
Help me!
Thank!!!!!!!!!!!
Click to expand...
Click to collapse
What rom do you have now?
Wysłane z mojego GT-I5700 za pomocą Tapatalk
kielichwina said:
What rom do you have now?
Wysłane z mojego GT-I5700 za pomocą Tapatalk
Click to expand...
Click to collapse
i can't flash any Rom!
Bricked
Mine if bricked. Nothing has worked. Question for you all. Bought this from a over seas company as I am in the United States. Was told that we would have to ship to Samsung in the UK. We went to the samsung.com/uk site and got the phone registered and it tells us to contact the service center. They will not accept the phone. We were honest with them and told them we would pay but after 5 calls between Samsung and Intercity the repair people they simply will not take the phone.
This is frustrating as I spent $750 bucks for a phone and can't even pay to get it fixed. I knew the risk of flashing but it's hard to believe it happened we've been doing it for yours. I'm not sure if my loyalty to Samsung will continue.

[Q] Stuck in bootloop after reverting to Gingerbread from CM 10

Hello everyone.
I have a problem which I hope you'll be willing and able to help with.
I wanted to try out CyanogenMod 10 on my Galaxy S I9000. I was on 2.3.3 so I used Odin to update to 2.3.6 (rooted). Then I installed superuser and mod manager, after which I installed Clockwork. I then used Clockwork to install CM 10. It worked flawlessly and this was my first time flashing ever.
However, I didn;t like CM 10 and decided to revert back to Gingerbread. I read it was as easy as simply using Odin to flash 2.3.6 again. I tried that but got stuck into a bootloop displaying the S sign over and over and over again. I tried downloading the PIT file which made Odin check Repartition by default and flashing like that but it didn't help, I'm still stuck in bootloop. I can access download mode without a problem but I'm stuck in bootloop forever.
Any help would be greatly appreciated. Thank you in advance.
Update: I found a thread detailing how to get back to Froyo so I tried it. I used a PIT file, PDA file, PHONE file and CSC file all separately and it worked. Now I'll just have to update back to 2.3.6 No idea why I was only able to revert back to Froyo and not Gingerbread, but it worked, thread can be closed.
Hey,
Bit of a late answer, but so you can refer to it if you ever go back to custom roms.
When you come back to stock from CM10, or any custom rom for that matter, you need to flash in a file named dbsdata.rfs.tar. Fixes the bootloops (custom roms and stock have different data partitions so incompatibilities in data partition cause bootloops like yours)
Sent from my GT-I9000 using xda premium

[Q] cant flash firmwares

hi. ive got problem with my OB. the problem is that i cant flash most of firmwares using smartflash tool. some time ago i could flash every firmware but now i can flash only v20 branded to 1&1 which i cant root or polish v30b. ive tried flashing cwm for v30b, it worked and ive installed custom rom, but after reboot ive had bootloop. every other flashed firmware causing bootloop. any solution?

Categories

Resources