Database Develop

Froyo: Only 3G and not HSDPA

How can i fix it?
The problem is present before flash nexus one.
I only can use Edge and 3G.
Thx

I'm having the same problem. It's not too big of a deal for me (3g is ok) but I def miss the speed of HSDPA.

How do you know it isn't using HSDPA? The stock rom never shows an H, it always stays at 3G even when it switches over when there is a data transfer.
I just looked around, but I can't remember where in the settings you can go to see if it is connecting at HSDPS. Maybe someone else can point you in the right direction.

I didn't know the stock rom didn't show it. So is the "H" icon like a cyan feature or what? I noticed a slight speed decrease too but people were saying in the dev section that going back to an older radio may solve the problem.

If you want to check the network type: *#*#4636#*#*
There should appear HSDPA.

i've tested with speedtest.net app. it's very slow!
the firmware 2.1 show 'H'... 2.2 must show too, if it's enabled

Ricman said:
i've tested with speedtest.net app. it's very slow!
the firmware 2.1 show 'H'... 2.2 must show too, if it's enabled
Click to expand...
Click to collapse
Stock 2.1 doesn't show 'H'. Only custom Roms.

janfsd said:
If you want to check the network type: *#*#4636#*#*
There should appear HSDPA.
Click to expand...
Click to collapse
WCDMA preferred it's selected
it's ok? it's the correct?
thx

Cool. Mine's running HDSPA. Thanks

Ricman said:
WCDMA preferred it's selected
it's ok? it's the correct?
thx
Click to expand...
Click to collapse
Not that. There is a lot of info there. Check what says 'Network type:'

What if we edit the build.prop with the HSPA settings ? On froyo

it show me Network type: HSDPA but still very slow!

Well then you have HSDPA What's the speed from speedtest.net ?

down:28kb/s
up:82kb/s
before froyo:
down:2100kb/s
up:100kb/s

Ricman said:
down:28kb/s
up:82kb/s
before froyo:
down:2100kb/s
up:100kb/s
Click to expand...
Click to collapse
The new radio that comes with froyo has caused this for a few people and you can see your old speeds again if you flash an older radio (don't know if this is the only way) but an older radio will cause the camcorder to quit working on froyo.

That certainly is strange. I would advise to wait, maybe it is a temporary network problem. Try rebooting too if you hadn't. You don't have the ATT Nexus one version do you?

The stock ROM has never shown H, its always shown 3g only even when you have hsdpa. I've never rooted so trust me. But I still get fast speeds like 3 Mbps.

janfsd said:
That certainly is strange. I would advise to wait, maybe it is a temporary network problem. Try rebooting too if you hadn't. You don't have the ATT Nexus one version do you?
Click to expand...
Click to collapse
I have the ATT Nexus but so far froyo is working 100%

Ricman said:
down:28kb/s
up:82kb/s
before froyo:
down:2100kb/s
up:100kb/s
Click to expand...
Click to collapse
Maybe reselect your regional bands in the service menu under phone information. Are you in the USA?

Not on Froyo yet, but I always see "3G" here on my stock 2.1 ROM on AT&T.. Here's a result from earlier..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Q] No data roaming?

Good day!
I currently work in the "hollers" of WV, where, on my HTC EVO 4G LTE I had data roaming and could even tether at times when needed for my laptop. However, since getting my HTC One M8, I have never seen or had data roaming. Within network settings, I have:
Network mode = LTE/CDMA
Roaming = automatic
Domestic voice = checked
Domestic data = checked
I have roaming voice, but no data at all.
I called Sprint and the particular individual I spoke with was like, "That sucks, your old phone works because its a different version of Android and there is nothing you can do".
They were not helpful.
Am I missing a setting? For what reason would my EVO LTE work on data roaming but the M8 won't?
EDIT:
Solved.
See my post here:
http://forum.xda-developers.com/showpost.php?p=53012601&postcount=7

typhoonikan said:
Good day!
I currently work in the "hollers" of WV, where, on my HTC EVO 4G LTE I had data roaming and could even tether at times when needed for my laptop. However, since getting my HTC One M8, I have never seen or had data roaming. Within network settings, I have:
Network mode = LTE/CDMA
Roaming = automatic
Domestic voice = checked
Domestic data = checked
I have roaming voice, but no data at all.
I called Sprint and the particular individual I spoke with was like, "That sucks, your old phone works because its a different version of Android and there is nothing you can do".
They were not helpful.
Am I missing a setting? For what reasomelyn would my EVO LTE work on data roaming but the M8 won't?
Click to expand...
Click to collapse
I had all sorts of issues with Roaming on my first phone.
I think that's where my problems started.
Extremely frustrating issue.
New phone roams normally.
Are your roaming guard options greyed out.
You could try ##786# if all else fails (which wipes evetything and triggers reactivation)
Then immediately turn off roaming guards and enable roaming.
I'd be curious if your phone runs in CDMA only.
mine would run fine on LTE but no roaming. And would not run on most CDMA only towers
My gut feeling is that there is an Antenna issue in the phone that causes some bands to malfunction.

I have no LTE in my area.
I am not sure what the problem is, but I am going to have to bite the bullet that I don't have data roaming in the area I am in for work.
Perhaps in others areas I will. I have not yet seen it in data roaming, but i Haven't traveled much since getting the phone.

Sounds like you might have got one of the bad first batch phones. I would return it. My phone roams just fine.
Sent from my 831C using Tapatalk

But I'm rooted. So much work to unroot and lock AND set up a new phone ;-;

typhoonikan said:
But I'm rooted. So much work to unroot and lock AND set up a new phone ;-;
Click to expand...
Click to collapse
You can hide it fairly easy without removing it. I feel your pain.
Flash the HBOOT that that masks everything out.
NAND Backup. Install a Stockish ROM and Factory Reset it.
And put on a Stock Recovery.
They will likely want to factory reset it.
To be extra cautious I changed my CID to SPC_004 (Harman). I have had technicians run an RUU to fully reset the phone.
If they do have an RUU it will fail and technician will just scratch his head. Their RUU will surely be for SPC_001 (if they have one).
These days I think in store service has really been dumbed down. All they do is reset your phone. They don't "diagnose" anything.
When you get back home all have to do is reinstall recovery and NAND restore.
Oh, you might want to remove your SD Card with TWRP backups and Custom ROMs when you bring it in

SOLUTION
The solution is to unlock the option for GSM data...
Solution here via pocketables:
http://www.pocketables.com/2014/05/how-to-select-allow-gsm-data-on-the-sprint-htc-one-m8.html?utm_source=feedly&utm_reader=feedly&utm_medium=rss&utm_campaign=how-to-select-allow-gsm-data-on-the-sprint-htc-one-m8

typhoonikan said:
The solution is to unlock the option for GSM data...
Solution here via pocketables:
http://www.pocketables.com/2014/05/how-to-select-allow-gsm-data-on-the-sprint-htc-one-m8.html?utm_source=feedly&utm_reader=feedly&utm_medium=rss&utm_campaign=how-to-select-allow-gsm-data-on-the-sprint-htc-one-m8
Click to expand...
Click to collapse
I noticed that you can also change Network Mode from LTE/CDMA to Automatic. When on Automatic you can then select the Allow GSM data option. Could you try that and let me know if Automatic and those options allow your phone to roam with data while in WV? WV is my home state, which I get back to every once in a while.

Yes, that is the whole point of the article. It does exactly that. Allows you to have data roaming on GSM, whereas it is not turned on by default. Those tricksters.

typhoonikan said:
The solution is to unlock the option for GSM data...
Solution here via pocketables:
http://www.pocketables.com/2014/05/how-to-select-allow-gsm-data-on-the-sprint-htc-one-m8.html?utm_source=feedly&utm_reader=feedly&utm_medium=rss&utm_campaign=how-to-select-allow-gsm-data-on-the-sprint-htc-one-m8
Click to expand...
Click to collapse
I just purchased my M8 today and the Mobile network settings doesn't have all those options shown on Pocketables.
Pocketables screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What I see on my phone. I can't find roaming options anywhere.
Did the recent update remove the roaming options?

NachoB said:
I just purchased my M8 today and the Mobile network settings doesn't have all those options shown on Pocketables.
Pocketables screenshot:
What I see on my phone. I can't find roaming options anywhere.
Did the recent update remove the roaming options?
Click to expand...
Click to collapse
I had this initially, but after activating the phone and updating the Data Profile, PRL Update, etc, and a reboot, it put all those settings back in there like the screenshot from Pocketables.

NachoB said:
I just purchased my M8 today and the Mobile network settings doesn't have all those options shown on Pocketables.
Pocketables screenshot:
What I see on my phone. I can't find roaming options anywhere.
Did the recent update remove the roaming options?
Click to expand...
Click to collapse
You have a Sprint device, yes?

typhoonikan said:
You have a Sprint device, yes?
Click to expand...
Click to collapse
I do. Even after updating my profile/PRL and rebooting the Network settings hasn't changed.

NachoB said:
I do. Even after updating my profile/PRL and rebooting the Network settings hasn't changed.
Click to expand...
Click to collapse
Same issue, any solution for this?

I returned the M8 that day and I'm back on my M7. Never did resolve the issue.
Sent from my HTCONE using Tapatalk

NachoB said:
I returned the M8 that day and I'm back on my M7. Never did resolve the issue.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
That's sad to know, there should be a solution here, did you try anything after that? installing custom roms, upgrading or anything?

Service at my home location was horrible (virtually no data nor voice) so I didn't want to do too much to the phone. It did do a ROM update immediately after I obtained the phone prior to going home. Sprints towers in my area just aren't ready for the technology.
Sent from my HTCONE using Tapatalk

jackdowsan said:
That's sad to know, there should be a solution here, did you try anything after that? installing custom roms, upgrading or anything?
Click to expand...
Click to collapse
Are the options there but greyed out or are they missing all together? If they are just greyed out you need to change the Network mode. Different modes have different options.

benny3 said:
Are the options there but greyed out or are they missing all together? If they are just greyed out you need to change the Network mode. Different modes have different options.
Click to expand...
Click to collapse
No options actually...

jackdowsan said:
No options actually...
Click to expand...
Click to collapse
I too have the exact same problem, i dont have those options, any solution for this yet?

[Q] change/manage radio/modem of Moto X XT 1052

I wanted to know if it was possible to change the radio management of our moto x, or change it with that of an American one (I do not care LTE)
thanks

toroloco73 said:
I wanted to know if it was possible to change the radio management of our moto x, or change it with that of an American one (I do not care LTE)
thanks
Click to expand...
Click to collapse
Not unless you are unlocked. Also not a good idea. You don't gain anything by doing that.

samwathegreat said:
Not unless you are unlocked. Also not a good idea. You don't gain anything by doing that.
Click to expand...
Click to collapse
i'll unlock....:good:
why i don't gain anything?
I don't want improve the power of reception, but i want to change the manage switching from 3G to 2G or from 2G to 3G
look the problem that i report Losing signal while switching 3G-2G-3G....

is there a way to change the settings PREFERRED NETWORK TYPE as in the secret menu on the dialer typing the code * # * # 4636 # * # * , and it's worth even after restarting the device?
I'll explain in the settings Motorola I only have 3 entries 4G (recommended), 3G and 2G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PREFERRED NETWORK TYPE
If I type the code * # * # 4636 # * # * in the dialer I see the following setting LTE / GSM auto (PRL)
LTE / GSM auto (PRL)
I would like the phone to fix this setting WCMA preferred maintained in subsequent reboots ]WCMA preferred
WCMA preferred

Can you try to download app from playstore, search for:
LTE OnOff
there in settingss u can put GSM only or (w)cdma only

Use an app like Radio Switcher
I had a similar situation with 3G being dropped and phone switching to 2G seemingly at the slightest hint of a weak 3G signal. The code mentioned above does not seem to work on Moto X (at least for me) but there are apps that will let you access the Phone Info menu regardless (no root). There you can set it to WCDMA ONLY.
I use Radio Switcher https://play.google.com/store/apps/details?id=com.snclabs.radioswitcher

dtg7 said:
I had a similar situation with 3G being dropped and phone switching to 2G seemingly at the slightest hint of a weak 3G signal. The code mentioned above does not seem to work on Moto X (at least for me) but there are apps that will let you access the Phone Info menu regardless (no root). There you can set it to WCDMA ONLY.
I use Radio Switcher https://play.google.com/store/apps/details?id=com.snclabs.radioswitcher
Click to expand...
Click to collapse
thanks for your answer, but i need something that force this choose from the power on of the device...
i don't want to choose it every time i restart my phone

i think that only way is root that i need to root the device, install Xposed Framework and Intelli3G

toroloco73 said:
thanks for your answer, but i need something that force this choose from the power on of the device...
i don't want to choose it every time i restart my phone
Click to expand...
Click to collapse
You don't do it every time. You set it once and it stays even if you reboot.

dtg7 said:
You don't do it every time. You set it once and it stays even if you reboot.
Click to expand...
Click to collapse
In fact, that's what I said .... every time I reboot I have to remember to set it in WCMA ...
if I make the root will have the chance to fix it permanently

toroloco73 said:
In fact, that's what I said .... every time I reboot I have to remember to set it in WCMA ...
if I make the root will have the chance to fix it permanently
Click to expand...
Click to collapse
You're right, you did say that. In my reply when I said "you" I meant and should have said "I" or "in my case", because for me it does stick. So the question is why does it stick in my case and not in yours. I have the T-Mobile xt1053 variant, and while the network might be the culprit I doubt it because it's the phone that requests the network type it wants to use, and the network should just respond yes or no, not force the phone to switch its settings. So my guess is a quirk in the phone.
I attempted to replicate your situation by doing multiple trials. First I set the phone setting to 2G only then used Radio Switcher (RS) to get into phone info and set it to "WCDMA only". With data on I rebooted the phone. And yes the data reverted to 2G! I did this three more times just to be sure and it reverted every time. Then I set the phone setting to "Automatic" (my phone setting only shows Automatic and 2G only) and pressing back the "Phone network type" showed "4G preferred (recommended)". I used RS to see the phone info and it was set at "LTE/GSM auto (PRL)", which I switched to " WCDMA only". Did the reboot test twice and both times phone info reverted to "LTE/GSM auto (PRL)".
But I already knew my phone could stick to WCDMA only so I didn't give up. I thought maybe the phone was not really registering my selection since I had been leaving data connected throughout these trials, meaning it was remembering the last thing which was set when data was turned on. So this time after setting to "WCDMA only" I turned data off then on again. Went back to RS and phone info to make sure it was still at "WCDMA only" then rebooted. And voila it stuck this time, phone info was "WCDMA only" and in the phone settings neither "Automatic" nor "2G only" were selected, both were empty.
So try that. And if that doesn't work... well good luck.

i'll try soon as possible

Thread already exists here
http://forum.xda-developers.com/moto-x/moto-x-qa/moto-x-xt1052-losing-signal-switching-t2711488
Thread closed

T-Mobile users on 5.1...

And your on LTE, what happens when you dial 611? It immediately hangs up every time. On both D and E.

works fine here, i call tmobile when i dial 611. im on rastapop, a 5.1 rom, but im using an older radio since i cant get phone calls while on lte with the newer radios.

Mines working fine..
Sent from my Nexus 6

Do they bump down to HSPA? Or stay on LTE like mine does? It only does it with Enhanced LTE on. Turned off it drops to HSPA and the call goes through. Any other call to any other phone, so far, works fine on LTE.

stevessvt said:
Do they bump down to HSPA? Or stay on LTE like mine does? It only does it with Enhanced LTE on. Turned off it drops to HSPA and the call goes through. Any other call to any other phone, so far, works fine on LTE.
Click to expand...
Click to collapse
nope. they stay on lte and the phone never rings, even with enhanced lte disabled. at least mine, and othets on tmobile having issues with the new radios. im using an older radio now, and works perfectly.

stevessvt said:
And your on LTE, what happens when you dial 611? It immediately hangs up every time. On both D and E.
Click to expand...
Click to collapse
Weird. This is happening to me too on D.

Now I see what you guys are talking about 611 hanging up... Mines don't exactly hangup but it says Call Ended then switches to Dialing then the call goes through. Never actually hangs up..
Sent from my Nexus 6

stevessvt said:
And your on LTE, what happens when you dial 611? It immediately hangs up every time. On both D and E.
Click to expand...
Click to collapse
The same thing is happening to me. I flashed the factory images and that happened.
---------- Post added at 10:31 PM ---------- Previous post was at 10:30 PM ----------
simms22 said:
nope. they stay on lte and the phone never rings, even with enhanced lte disabled. at least mine, and othets on tmobile having issues with the new radios. im using an older radio now, and works perfectly.
Click to expand...
Click to collapse
With that older radio, do you still get VoLTE?

I'm on D, enhanced LTE on. 611 works. No double texts. This must be area / tower specific?

Anyone else notice LTE not staying selected when choosing network type?
If I choose LTE, the little green radio button shows as selected. All good. Back out to the main settings, then go back into cellular networks and see if it's still selected and nope! Radio button is blank again. Still says LTE, but the button is not selected.
If I go to select 3g or 2g options, button shows as selected, back out, then back in....radio button remains selected.
Does this for me on both of the new radios... 95R & 98R

carlz28 said:
Anyone else notice LTE not staying selected when choosing network type?
If I choose LTE, the little green radio button shows as selected. All good. Back out to the main settings, then go back into cellular networks and see if it's still selected and nope! Radio button is blank again. Still says LTE, but the button is not selected.
If I go to select 3g or 2g options, button shows as selected, back out, then back in....radio button remains selected.
Does this for me on both of the new radios... 95R & 98R
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

carlz28 said:
View attachment 3218072
Click to expand...
Click to collapse
Sorry for replying on old thread..
but I am facing same issue on stock ROM (NON Rooted ) with the latest 5.1.1 build.
Any solution?
Thanks & Regards,
Rahul

[Q] flash LYZ28E on Verizon N6?

I am using Verizon N6 on Tmobile and was wondering if I can flash the TMo ( LYZ28E ) on my phone to get wifi calling on Tmo.
Can somebody please confirm?

Update: I was able to flash LYZ288 TMo build on my Verizon N6 using nexus tool kit without any errors.
I can see Wifi calling option in the settings options now and I need to figure out how to test wifi calling actually works on the phone. Any suggestions?

the WiFi calling will only work if your provider provides support for WiFi calling, and Verizon does not. only tmobile will provide support for WiFi calling, and the fi network.

Provider of the phone or provider of the Sim? I'm using T-Mobile sim

simms22 said:
the WiFi calling will only work if your provider provides support for WiFi calling, and Verizon does not. only tmobile will provide support for WiFi calling, and the fi network.
Click to expand...
Click to collapse
Provider of the phone or provider of the Sim? I'm using T-Mobile sim on Verizon n6

stivelio said:
Provider of the phone or provider of the Sim? I'm using T-Mobile sim on Verizon n6
Click to expand...
Click to collapse
ahhh.. the provider of the sim. all US bought nexus 6 are identical, no matter where they were bought.
---------- Post added at 02:47 PM ---------- Previous post was at 02:46 PM ----------
stivelio said:
Update: I was able to flash LYZ288 TMo build on my Verizon N6 using nexus tool kit without any errors.
I can see Wifi calling option in the settings options now and I need to figure out how to test wifi calling actually works on the phone. Any suggestions?
Click to expand...
Click to collapse
you can put it into airplane mode, then turn on WiFi and try to make a call.

you can put it into airplane mode, then turn on WiFi and try to make a call.[/QUOTE]
Just tries this but didn't work. It gives me a message that I must turn airplane mode off or connect to wireless network even though I was connected to wifi

stivelio said:
Just tries this but didn't work. It gives me a message that I must turn airplane mode off or connect to wireless network even though I was connected to wifi
Click to expand...
Click to collapse
ok, on your lockscreen, does it say WiFi calling? and which radio are you using?

It should say T-Mobile wifi calling at the top of your lockscreen like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

chris6278 said:
It should say T-Mobile wifi calling at the top of your lockscreen like this View attachment 3346761
Click to expand...
Click to collapse
I see T-Mobile WiFi calling in under WiFi icon when I pull down my notification menu. Also I see 14R radio in settings. Does this mean WiFi calling won't actually work because it is a Verizon phone?

stivelio said:
I see T-Mobile WiFi calling in under WiFi icon when I pull down my notification menu. Also I see 14R radio in settings. Does this mean WiFi calling won't actually work because it is a Verizon phone?
Click to expand...
Click to collapse
it is a google phone, its just bought through Verizon. but that doesn't matter at all.

simms22 said:
it is a google phone, its just bought through Verizon. but that doesn't matter at all.
Click to expand...
Click to collapse
Ah ok. In that case I really don't know what else to do cuz phone seems to show latest radio and kernels along with WiFi calling label in notification

stivelio said:
Ah ok. In that case I really don't know what else to do cuz phone seems to show latest radio and kernels along with WiFi calling label in notification
Click to expand...
Click to collapse
I'm on tmobile, but aren't using all that's required for WiFi calling, so haven't tried myself. I know a few were having issues with it, so its not just you. but eventually they got it working, so I think you will too.

stivelio said:
I see T-Mobile WiFi calling in under WiFi icon when I pull down my notification menu. Also I see 14R radio in settings. Does this mean WiFi calling won't actually work because it is a Verizon phone?
Click to expand...
Click to collapse
If its saying wifi calling in your notification menu then it should be working. All nexus 6 no matter where you got it are the same. As long as your on T-Mobile then thats all that matters

chris6278 said:
If its saying wifi calling in your notification menu then it should be working. All nexus 6 no matter where you got it are the same. As long as your on T-Mobile then thats all that matters
Click to expand...
Click to collapse
Funny T-Mobile tech support won't even answer any of my questions because I brought the Nexus 6 over from Verizon. I can't get Wifi Calling working even though I am on the latest TMobile OTA. They claim they cannot provide support to devices not bought from T-Mobile. I'm currently stuck digging through XDA for a solution to my problem.