And your on LTE, what happens when you dial 611? It immediately hangs up every time. On both D and E.
works fine here, i call tmobile when i dial 611. im on rastapop, a 5.1 rom, but im using an older radio since i cant get phone calls while on lte with the newer radios.
Mines working fine..
Sent from my Nexus 6
Do they bump down to HSPA? Or stay on LTE like mine does? It only does it with Enhanced LTE on. Turned off it drops to HSPA and the call goes through. Any other call to any other phone, so far, works fine on LTE.
stevessvt said:
Do they bump down to HSPA? Or stay on LTE like mine does? It only does it with Enhanced LTE on. Turned off it drops to HSPA and the call goes through. Any other call to any other phone, so far, works fine on LTE.
Click to expand...
Click to collapse
nope. they stay on lte and the phone never rings, even with enhanced lte disabled. at least mine, and othets on tmobile having issues with the new radios. im using an older radio now, and works perfectly.
stevessvt said:
And your on LTE, what happens when you dial 611? It immediately hangs up every time. On both D and E.
Click to expand...
Click to collapse
Weird. This is happening to me too on D.
Now I see what you guys are talking about 611 hanging up... Mines don't exactly hangup but it says Call Ended then switches to Dialing then the call goes through. Never actually hangs up..
Sent from my Nexus 6
stevessvt said:
And your on LTE, what happens when you dial 611? It immediately hangs up every time. On both D and E.
Click to expand...
Click to collapse
The same thing is happening to me. I flashed the factory images and that happened.
---------- Post added at 10:31 PM ---------- Previous post was at 10:30 PM ----------
simms22 said:
nope. they stay on lte and the phone never rings, even with enhanced lte disabled. at least mine, and othets on tmobile having issues with the new radios. im using an older radio now, and works perfectly.
Click to expand...
Click to collapse
With that older radio, do you still get VoLTE?
I'm on D, enhanced LTE on. 611 works. No double texts. This must be area / tower specific?
Anyone else notice LTE not staying selected when choosing network type?
If I choose LTE, the little green radio button shows as selected. All good. Back out to the main settings, then go back into cellular networks and see if it's still selected and nope! Radio button is blank again. Still says LTE, but the button is not selected.
If I go to select 3g or 2g options, button shows as selected, back out, then back in....radio button remains selected.
Does this for me on both of the new radios... 95R & 98R
carlz28 said:
Anyone else notice LTE not staying selected when choosing network type?
If I choose LTE, the little green radio button shows as selected. All good. Back out to the main settings, then go back into cellular networks and see if it's still selected and nope! Radio button is blank again. Still says LTE, but the button is not selected.
If I go to select 3g or 2g options, button shows as selected, back out, then back in....radio button remains selected.
Does this for me on both of the new radios... 95R & 98R
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
carlz28 said:
View attachment 3218072
Click to expand...
Click to collapse
Sorry for replying on old thread..
but I am facing same issue on stock ROM (NON Rooted ) with the latest 5.1.1 build.
Any solution?
Thanks & Regards,
Rahul
Related
How can i fix it?
The problem is present before flash nexus one.
I only can use Edge and 3G.
Thx
I'm having the same problem. It's not too big of a deal for me (3g is ok) but I def miss the speed of HSDPA.
How do you know it isn't using HSDPA? The stock rom never shows an H, it always stays at 3G even when it switches over when there is a data transfer.
I just looked around, but I can't remember where in the settings you can go to see if it is connecting at HSDPS. Maybe someone else can point you in the right direction.
I didn't know the stock rom didn't show it. So is the "H" icon like a cyan feature or what? I noticed a slight speed decrease too but people were saying in the dev section that going back to an older radio may solve the problem.
If you want to check the network type: *#*#4636#*#*
There should appear HSDPA.
i've tested with speedtest.net app. it's very slow!
the firmware 2.1 show 'H'... 2.2 must show too, if it's enabled
Ricman said:
i've tested with speedtest.net app. it's very slow!
the firmware 2.1 show 'H'... 2.2 must show too, if it's enabled
Click to expand...
Click to collapse
Stock 2.1 doesn't show 'H'. Only custom Roms.
janfsd said:
If you want to check the network type: *#*#4636#*#*
There should appear HSDPA.
Click to expand...
Click to collapse
WCDMA preferred it's selected
it's ok? it's the correct?
thx
Cool. Mine's running HDSPA. Thanks
Ricman said:
WCDMA preferred it's selected
it's ok? it's the correct?
thx
Click to expand...
Click to collapse
Not that. There is a lot of info there. Check what says 'Network type:'
What if we edit the build.prop with the HSPA settings ? On froyo
it show me Network type: HSDPA but still very slow!
Well then you have HSDPA What's the speed from speedtest.net ?
down:28kb/s
up:82kb/s
before froyo:
down:2100kb/s
up:100kb/s
Ricman said:
down:28kb/s
up:82kb/s
before froyo:
down:2100kb/s
up:100kb/s
Click to expand...
Click to collapse
The new radio that comes with froyo has caused this for a few people and you can see your old speeds again if you flash an older radio (don't know if this is the only way) but an older radio will cause the camcorder to quit working on froyo.
That certainly is strange. I would advise to wait, maybe it is a temporary network problem. Try rebooting too if you hadn't. You don't have the ATT Nexus one version do you?
The stock ROM has never shown H, its always shown 3g only even when you have hsdpa. I've never rooted so trust me. But I still get fast speeds like 3 Mbps.
janfsd said:
That certainly is strange. I would advise to wait, maybe it is a temporary network problem. Try rebooting too if you hadn't. You don't have the ATT Nexus one version do you?
Click to expand...
Click to collapse
I have the ATT Nexus but so far froyo is working 100%
Ricman said:
down:28kb/s
up:82kb/s
before froyo:
down:2100kb/s
up:100kb/s
Click to expand...
Click to collapse
Maybe reselect your regional bands in the service menu under phone information. Are you in the USA?
Not on Froyo yet, but I always see "3G" here on my stock 2.1 ROM on AT&T.. Here's a result from earlier..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On stock 2.1, I get 3G practically everywhere I go, but when I flash a rom I always get the H or E symbol and sometimes it randomly goes dead even though I just had H or E in the exact same spot... What could I do to improve this?
H is another symbol for 3g lol ithink all builds have this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-P500 using XDA App
switch to another modem to see if it helps.
mengbo said:
switch to another modem to see if it helps.
Click to expand...
Click to collapse
Tried JI6 - I'm using Serendipity 5.8 and it's the same. I get like 4 bars, then it jumps to 0 and randomly I have no connection. I forgot to note, it is for both Data and Voice networks...
If it helps, I'm in Orange County and when I do Speedtest my scores are abysmal on "H" I get 270KBPS down and 130 KBPS up.
The "H" is 3.5g a little faster than 3g. If it keeps alternating between "H" and "E", I would definitely consider flashing a new modem.
MastaBetta said:
The "H" is 3.5g a little faster than 3g. If it keeps alternating between "H" and "E", I would definitely consider flashing a new modem.
Click to expand...
Click to collapse
I've flashed 3. All of them do this. :/
Highest I've gotten on Speed test is with Jk4 and it was like 800kbps download... And it's usually around 200-300.
have you tried to disable HSPA? To do so, go to your dialer>type *#301279#
select [2] then select [1] . see it that helps
*edit* If that doesn't work, put the phone in airplane mode for a few minutes and re-enable.
MastaBetta said:
have you tried to disable HSPA? To do so, go to your dialer>type *#301279#
select [2] then select [1] . see it that helps
*edit* If that doesn't work, put the phone in airplane mode for a few minutes and re-enable.
Click to expand...
Click to collapse
Thanks man. Trying it now, will report back soon...
Still iffy... I dunno but I dropped my old phone in water with the SIM card. I got a new one, but could it be the SIM card that's damaged?
It very well could be the sim card.
Hope you get your phone working again!
MastaBetta said:
It very well could be the sim card.
Hope you get your phone working again!
Click to expand...
Click to collapse
Any ideas on how to get a new one? I don't want them to see the custom rom, but how could I tell them I'm gettin iffy service without showing up with my phone?
Getting some good speeds here in south Scottsdale around Thomas Rd & Scottsdale Rd.
Speed Tests:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
APN Settings:
Note: I took the speed tests in a different area than the screenshots, I wish I had that kind of service in my living room . Hopefully they throw some new towers up soon, still; very pleased so far :good: .
Anyone else in Phoenix? What kind of speed are you getting and where?
I'm in Phoenix, I'm not getting LTE, Im still on 4.2.1- However, I can pick up LTE but no data connection. I noticed last night when I switch over to 'LTE only' i had a few bars, no label next to it tho (as yours reads 4G, mine was blank). Not sure what I need to do...
Did you change the APN to fast.t-mobile.com?
Do I need to edit my APN settings?
---------- Post added at 08:58 PM ---------- Previous post was at 08:58 PM ----------
No
the taxidermist said:
I'm in Phoenix, I'm not getting LTE, Im still on 4.2.1- However, I can pick up LTE but no data connection. I noticed last night when I switch over to 'LTE only' i had a few bars, no label next to it tho (as yours reads 4G, mine was blank). Not sure what I need to do...
Click to expand...
Click to collapse
you need to change your apn settings manually
I went in matched all your settings, however I do not have the password or server field filled out... At home I was picking up LTE like I said just no data, seems here at work in N.PHX im not having luck pulling down signal.
i cannot make or receive calls after i switch to LTE, anyone with that problem.
lte/gsm...switch to that
dr.devman said:
lte/gsm...switch to that
Click to expand...
Click to collapse
its on lte/gsm.
PHX LTE
tnygigles66 said:
you need to change your apn settings manually
Click to expand...
Click to collapse
I am having the same problem. I changed my APN to fast and everything, I am running PAC's new ROM, with .33 radio. Even though the ROM is 4.2.2 it's allowing me to access all the settings to change everything and all but I only get grey lte bars like the other users, no actual data. What am I doing wrong. Can someone give me a step by step link to get it working, I can change roms and factory reset if need be.
Are you receiving a 4g indicator next to your signal icon? What area of Phx are you in?
tpboi said:
its on lte/gsm.
Click to expand...
Click to collapse
the taxidermist said:
I went in matched all your settings, however I do not have the password or server field filled out... At home I was picking up LTE like I said just no data, seems here at work in N.PHX im not having luck pulling down signal.
Click to expand...
Click to collapse
Not sure if it will work for you but if you hit the menu button (top right) and reset to defaults you should have exactly what I do for T-Mobile US, minus changing IPv4/IPv6 and APN to fast.t-mobile.com. That's all I did.
tpboi said:
i cannot make or receive calls after i switch to LTE, anyone with that problem.
Click to expand...
Click to collapse
Same. See below.
dr.devman said:
lte/gsm...switch to that
Click to expand...
Click to collapse
When set to this my device will drop LTE and switch to H or E to make calls. Not sure if I can receive while on LTE though .
tpboi said:
its on lte/gsm.
Click to expand...
Click to collapse
See above.
Terbak said:
I am having the same problem. I changed my APN to fast and everything, I am running PAC's new ROM, with .33 radio. Even though the ROM is 4.2.2 it's allowing me to access all the settings to change everything and all but I only get grey lte bars like the other users, no actual data. What am I doing wrong. Can someone give me a step by step link to get it working, I can change roms and factory reset if need be.
Click to expand...
Click to collapse
Did you get the fast.t-mobile.com. Without the - it did not work for me.
Terbak said:
I am having the same problem. I changed my APN to fast and everything, I am running PAC's new ROM, with .33 radio. Even though the ROM is 4.2.2 it's allowing me to access all the settings to change everything and all but I only get grey lte bars like the other users, no actual data. What am I doing wrong. Can someone give me a step by step link to get it working, I can change roms and factory reset if need be.
Click to expand...
Click to collapse
post you apn settings
mind sharing which modem you have on your phone I live rather close to that location an would like to test some speed out.
negroplasty said:
Did you get the fast.t-mobile.com. Without the - it did not work for me.
Click to expand...
Click to collapse
Ok then if I want to make it stick I have to do the build.prop edit and all that jazz right?
Terbak said:
Ok then if I want to make it stick I have to do the build.prop edit and all that jazz right?
Click to expand...
Click to collapse
No the APN should stick, having LTE enabled will not though. If you're running CM10.1 see this post.
im on 4.2.1 factory image, .33 Radio... Getting full "gray" bars and nothing else... fast.t-mobile.com APN's v4/v6 no luck not sure what the dilly is... Wish I could be more helpful!
negroplasty said:
No the APN should stick, having LTE enabled will not though. If you're running CM10.1 see this post.
Click to expand...
Click to collapse
http://hippowise.com/how-to-permanently-enable-lte-on-android-4-2-2-nexus-4/
Check that out
tried .33 .27 band, tried v4/v6, tried fast.tmobile.com and fast.tmobile.com. tried lte/gsm and all other modes. on stock rom. i still cannot make or receive call, the person im calling can see my calls, just no voice what so ever. looking for solutions.
the taxidermist said:
im on 4.2.1 factory image, .33 Radio... Getting full "gray" bars and nothing else... fast.t-mobile.com APN's v4/v6 no luck not sure what the dilly is... Wish I could be more helpful!
Click to expand...
Click to collapse
Weird, if everything looks like I have it in the APN settings I'm out of ideas, sorry.
Terbak said:
http://hippowise.com/how-to-permanently-enable-lte-on-android-4-2-2-nexus-4/
Check that out
Click to expand...
Click to collapse
Strange, it sticks for me without any tampering... maybe that's just for stock?
I am using Verizon N6 on Tmobile and was wondering if I can flash the TMo ( LYZ28E ) on my phone to get wifi calling on Tmo.
Can somebody please confirm?
Update: I was able to flash LYZ288 TMo build on my Verizon N6 using nexus tool kit without any errors.
I can see Wifi calling option in the settings options now and I need to figure out how to test wifi calling actually works on the phone. Any suggestions?
the WiFi calling will only work if your provider provides support for WiFi calling, and Verizon does not. only tmobile will provide support for WiFi calling, and the fi network.
Provider of the phone or provider of the Sim? I'm using T-Mobile sim
simms22 said:
the WiFi calling will only work if your provider provides support for WiFi calling, and Verizon does not. only tmobile will provide support for WiFi calling, and the fi network.
Click to expand...
Click to collapse
Provider of the phone or provider of the Sim? I'm using T-Mobile sim on Verizon n6
stivelio said:
Provider of the phone or provider of the Sim? I'm using T-Mobile sim on Verizon n6
Click to expand...
Click to collapse
ahhh.. the provider of the sim. all US bought nexus 6 are identical, no matter where they were bought.
---------- Post added at 02:47 PM ---------- Previous post was at 02:46 PM ----------
stivelio said:
Update: I was able to flash LYZ288 TMo build on my Verizon N6 using nexus tool kit without any errors.
I can see Wifi calling option in the settings options now and I need to figure out how to test wifi calling actually works on the phone. Any suggestions?
Click to expand...
Click to collapse
you can put it into airplane mode, then turn on WiFi and try to make a call.
you can put it into airplane mode, then turn on WiFi and try to make a call.[/QUOTE]
Just tries this but didn't work. It gives me a message that I must turn airplane mode off or connect to wireless network even though I was connected to wifi
stivelio said:
Just tries this but didn't work. It gives me a message that I must turn airplane mode off or connect to wireless network even though I was connected to wifi
Click to expand...
Click to collapse
ok, on your lockscreen, does it say WiFi calling? and which radio are you using?
It should say T-Mobile wifi calling at the top of your lockscreen like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
chris6278 said:
It should say T-Mobile wifi calling at the top of your lockscreen like this View attachment 3346761
Click to expand...
Click to collapse
I see T-Mobile WiFi calling in under WiFi icon when I pull down my notification menu. Also I see 14R radio in settings. Does this mean WiFi calling won't actually work because it is a Verizon phone?
stivelio said:
I see T-Mobile WiFi calling in under WiFi icon when I pull down my notification menu. Also I see 14R radio in settings. Does this mean WiFi calling won't actually work because it is a Verizon phone?
Click to expand...
Click to collapse
it is a google phone, its just bought through Verizon. but that doesn't matter at all.
simms22 said:
it is a google phone, its just bought through Verizon. but that doesn't matter at all.
Click to expand...
Click to collapse
Ah ok. In that case I really don't know what else to do cuz phone seems to show latest radio and kernels along with WiFi calling label in notification
stivelio said:
Ah ok. In that case I really don't know what else to do cuz phone seems to show latest radio and kernels along with WiFi calling label in notification
Click to expand...
Click to collapse
I'm on tmobile, but aren't using all that's required for WiFi calling, so haven't tried myself. I know a few were having issues with it, so its not just you. but eventually they got it working, so I think you will too.
stivelio said:
I see T-Mobile WiFi calling in under WiFi icon when I pull down my notification menu. Also I see 14R radio in settings. Does this mean WiFi calling won't actually work because it is a Verizon phone?
Click to expand...
Click to collapse
If its saying wifi calling in your notification menu then it should be working. All nexus 6 no matter where you got it are the same. As long as your on T-Mobile then thats all that matters
chris6278 said:
If its saying wifi calling in your notification menu then it should be working. All nexus 6 no matter where you got it are the same. As long as your on T-Mobile then thats all that matters
Click to expand...
Click to collapse
Funny T-Mobile tech support won't even answer any of my questions because I brought the Nexus 6 over from Verizon. I can't get Wifi Calling working even though I am on the latest TMobile OTA. They claim they cannot provide support to devices not bought from T-Mobile. I'm currently stuck digging through XDA for a solution to my problem.
Am curious who all have tried to use wifi calling and have received this message?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This has been discussed a little bit in the no LTE in the US with T-Mobile thread but I figured I would make its own thread for this issue and get everyone to speak up.. I have already tried to fix it with T-Mobile and that did not work.. I have already got crystal z attention and she has pmed me on the matter asking for a report and picture.. I feel a lil dumb on the matter and sent her a report(I hope I did it correctly) along with the screenshot (dated and the time it happened to go with the report).. anyone else pls reply if u have encountered the issue.. crystal is watching the forums and the more info she sees the more we can help her... Thank you...
Sent from my ONEPLUS A3000 using Tapatalk
My wifi calling works perfectly and I'm using simple mobile prepaid (They run off T-Mobile). Since I activated wifi calling it's worked everytime with no error message. I tested it with airplane mode on just to be sure for you.
djr4x4 said:
Am curious who all have tried to use wifi calling and have received this message?
This has been discussed a little bit in the no LTE in the US with T-Mobile thread but I figured I would make its own thread for this issue and get everyone to speak up.. I have already tried to fix it with T-Mobile and that did not work.. I have already got crystal z attention and she has pmed me on the matter asking for a report and picture.. I feel a lil dumb on the matter and sent her a report(I hope I did it correctly) along with the screenshot (dated and the time it happened to go with the report).. anyone else pls reply if u have encountered the issue.. crystal is watching the forums and the more info she sees the more we can help her... Thank you...
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I'm using ATT (have an older nano SIM from a Samsung Alpha so it's all setup right), and enabled WIFI calling in the SIM1 settings. I've tried calling when on WIFI and it seems fine. I'm not exactly sure what to expect from it. Would a good test be to be in a place that has no cellular service, but has a WIFI router , and then try to make a regular call? Is that the bottom line?
Thanks.
I have signal basically in one spot in my house.. anywhere else and my signal is dead... Turn on wifi calling. The vowifi display that replaces volte will flash on/off over a time period and then will pop up with the above message and will turn off wifi calling in the settings..
Sent from my ONEPLUS A3000 using Tapatalk
T-Mobile overlooked 1 small detail to my wifi calling issue and crystal z asked me to look into it.. T-Mobile dropped my e911 address when I swapped phones.. I put the address back in and wifi calling works again...
Sent from my ONEPLUS A3000 using Tapatalk
hachamacha said:
I'm using ATT (have an older nano SIM from a Samsung Alpha so it's all setup right), and enabled WIFI calling in the SIM1 settings. I've tried calling when on WIFI and it seems fine. I'm not exactly sure what to expect from it. Would a good test be to be in a place that has no cellular service, but has a WIFI router , and then try to make a regular call? Is that the bottom line?
Thanks.
Click to expand...
Click to collapse
You have WiFi calling working on AT&T? I don't even see the option for WiFi Calling or VoLTE on my OP3T. The Enhance Settings are non-existent. When I search for WiFi in settings, I see WiFi Calling, and can turn it on, but it never stays on. When I go back into the setting it is off again. Anyone else on ATT get either of these options to work?
TR