Database Develop

[Q] Can not install Cyanogenmod

Hi XDA
I am having problems with installing CM on my P990. I have both tried the stable and the latest nightly rom, and none of them can boot.
Then I reboot after the installation has finished I first see the white lg logo, and after a few second it changes to the one with the blue line in the background.
The installation is insanely fast, like 5 seconds.
The stange thing is, that I can run MIUI without any trobles.
Anyone having some suggestions af what to do?

Does your phone seem to be stuck at the second LG logo? Remember the first boot takes much time so be patient.

Yes, stuck at second lg logo. I have waited for about 15 minuttes.

Allright, have you tried a Cm7 Kang instead? Try Temaseks Cm7 Kang.

That does not work either...

This happened to me as well. I recently got 3 of these phones (1 for my gf, 1 for my brother and one for me), rooted all 3 and started customizing.
Cyanogenmod 7.1 Stable worked on two phones (both phones got BSOD when charging) but my phone just won't boot CM7 Stable. I ended up using Temasek's KANG 204-49 and it works beautifully (with vadonka's kernel, not his latest though, haven't tried that one yet)
MIUI did work on all the phones. This is really weird but I can confirm.

Maybe you have to convert your filesystem to ext3.
Sent from my Optimus 2X using XDA Premium App

so... cm7 stable is a completely different build to cm7 nightly's from about #179 onwards. teamsek's kang's are based no the last nightly build, #204. to convert/update to the latest kang from the stable version you need to do a full backup with titanium or similar app. then... when in recovery do a full wipe, wipe cache, davik cache and battery stats. then flash your kang zip and restore your phone with titanium backup once you phone has booted up. good luck!

[Q] SD Card Removed???

Ok, so I went from Classicnerd to CM9 Alpha 2 to the CM9 Unofficial Nightlies and I am having an issue with the latest update. It seems that when I upgrade to either the CM9 Official Nightly or the most recent Unofficial Nightly, I am getting an SD Card Removed error. It seems to be linked to the upgrade from 4.0.3 to 4.0.4. All the apps that have been moved to my SD Card partition are not accessible. Anyone know why? I haven't wiped completely, because I am happy on 4.0.3, but I just wanted to see if there is an answer for this?

keithobri said:
Ok, so I went from Classicnerd to CM9 Alpha 2 to the CM9 Unofficial Nightlies and I am having an issue with the latest update. It seems that when I upgrade to either the CM9 Official Nightly or the most recent Unofficial Nightly, I am getting an SD Card Removed error. It seems to be linked to the upgrade from 4.0.3 to 4.0.4. All the apps that have been moved to my SD Card partition are not accessible. Anyone know why? I haven't wiped completely, because I am happy on 4.0.3, but I just wanted to see if there is an answer for this?
Click to expand...
Click to collapse
It sounds like something got corrupted. If you have a good backup, restore it, then wipe cache and wipe dalvik cache and install the latest nightly. That should do it. If you don't have a good backup, try wipe delete factory reset, wipe dalvik cache and install the latest nightly. You'll have to restore your data, but that's what you get for not having a nandroid.........
Good luck.
Edit : Rereading your post, I think you'll have to do a clean install of cm9. ClassicNerd uses different source. If you have a good backup, you can try advanced restore > restore data, or Titanium.

Yes, he's right.
When going from one release to the next in the same style of series (Alpha2 => Nightlies => more nightlies), you can get away with just a wipe of the /cache and the Dalvik cache. If you go from CN => Nightlies or Nightlies => CM, or any other combo that isn't the same series, you are best set to do a full backup, then a full wipe and start fresh. You can try an Advanced Restore, but be aware it might not work.

I too am having the same problem... it first occurred with the upgrade to 4.0.4. I wiped every thing restored cm9 backup and wen I'm instcalling apps and moving them to sdcard after about five apps my sdcard is removed and will not mount. So I reverted to cm7 (got to have headphone jack) and after moving some apps the samething occured again...
Sent from my HTC Desire s using xda premium

Since we are talking about wiping, I would just like to chime in and ask how that is done on the TouchPad. The only other Android device I have ever owned is my Droid X2 that I use now. And when I want to wipe that, Motorola has a method of doing it to where it sets you back to stock factory settings with a file they provide. Since the TouchPad isn't an official Android device and all, what do you use to wipe it and start over? A link to a thread that explains it would be helpful. I'm sure there is one. I will look.

for an answer to the OP i found this on rootzwiki....dunno if ok to post link but ima do it anyways...remove if frowned upon:
http://rootzwiki.com/topic/13277-cm7-fixes-for-sdcard-issues/
to fix my sdcard issues i AMCEUninstalled android and did a clean install of the latest moboot, gapps, clockworkmod, and cm9 A2. As for fixing the sdcard issue it also fixed alot of other things....no more Google maps constantly opening and wat not....much more stable.

jsgraphicart said:
Since we are talking about wiping, I would just like to chime in and ask how that is done on the TouchPad. The only other Android device I have ever owned is my Droid X2 that I use now. And when I want to wipe that, Motorola has a method of doing it to where it sets you back to stock factory settings with a file they provide. Since the TouchPad isn't an official Android device and all, what do you use to wipe it and start over? A link to a thread that explains it would be helpful. I'm sure there is one. I will look.
Click to expand...
Click to collapse
Use ClockworkMod to wipe data/factory reset

[Q] Phone not booting.

Hey guys.
I've been using CM10 M2 for a while now and I decided I should reflash it.
So I made a wipe ( cleared all cache and everything ), installed cm10 m2 and Tantrum's Aroma Gapps installer to install my gapps and other stuff, and rebooted.
Problem is, once I reboot my phone will not boot and it is stuck on a black screen with LED's flashing.
Tried a few times and it the problem persists.
Any word of advice for me?
-Anton
EDIT: Tried flashing latest nightly with tantrums gapps, same problem.
EDIT V2: Flashed same nightly WITHOUT Tantrums gapps ( regular gapps ), everything boots normally. Problem was with Tantrums gapps.

Antonnzr said:
Hey guys.
I've been using CM10 M2 for a while now and I decided I should reflash it.
So I made a wipe ( cleared all cache and everything ), installed cm10 m2 and Tantrum's Aroma Gapps installer to install my gapps and other stuff, and rebooted.
Problem is, once I reboot my phone will not boot and it is stuck on a black screen with LED's flashing.
Tried a few times and it the problem persists.
Any word of advice for me?
-Anton
EDIT: Tried flashing latest nightly with tantrums gapps, same problem.
EDIT V2: Flashed same nightly WITHOUT Tantrums gapps ( regular gapps ), everything boots normally. Problem was with Tantrums gapps.
Click to expand...
Click to collapse
I'm not any pro user, but I think that the CM10 is too heavy for LGOB. I use the CM7.2 and works like a charm.

DFornazari said:
I'm not any pro user, but I think that the CM10 is too heavy for LGOB. I use the CM7.2 and works like a charm.
Click to expand...
Click to collapse
I have used nightly builds of CM10 from October 15 onwards with a problen
only on the 19th release when I couldn't install anything due to an issue with
the version of Clockworkmod Recovery. Once I found out how to downgrade
that version, it's all fine (touch wood).
Sam

@Antonnzr
Rather just use normal GAPPS. There was a release by tantrums that caused bootloop, but he fixed it now.
Use ADB to go back to recovery.
@DFornazari
CM10 isn't heavy at all. rmcc committed a lot of changes from TI's branch and I think it caused some instability with the some of the newer releases. I based that speculation from a comparison between nightlies before the changes was made and after the changes was made. I didn't look at the code so I can't be 100% certain since I don't know what they changed. rmmc is a great dev and should have all the device specif bugs sorted soon.

Yes its all working fine now with cm10 m2 and regualr gapps but I have a new issue.
Whenever I try to download an app from the Play Market ( nova launcher, for example ) it pops up with an error reading:
"Error: 'Nova launcher' could not be downloaded due to an error (927)"
or alternatively:
"Error: 'Nova launcher' could not be downloaded due to an error ( error retrieving information from the server )"
Tried to install apps via online Play Store both on my phone and my laptop but the download never starts. Help?
Disregard that, fixed after reflash.

Update to latest Milaq's Nigthly build

Hi,
I have the Touchpad installed with Milaq's nightly build 08/25 and the jb-app 2013/03 build.
Is there a way to update to latest Milaq's nightly build and latest jb-app 2013/08/12 without resetting the configuration in Touchpad and will have to re-install all the apps and their config/settings?
I was thinking to install the update via CWM-Clockmod, but afraid that I will have to re-install and reconfig all the apps.
Thanks,

Well, if nothing else, an app like MyBackup Root will be able to save all of your apks+their data. Plenty of other apps do it too, that is just the one I've used. Good luck.

You can try a dirty flash, meaning that you only wipe cache and dalvik (not system or data) when you flash it in recovery. Make sure to do a nandroid first.

There shouldn't be any issues when flashing the new nightly from the recovery (CWM or TWRP). Just remember to wipe cache and Dalvik cache before rebooting to CM.

I did an dirty update to the newest cm10.2 nightly coming from cm10.1 - no bad issues so far.
Be sure to make a backup of your old rom and simply try

[CM 13] Bootloops after installing nightly updates

Hi guys!
my phone seems to have issues with dirty flashes.
A few days ago i successfully clean installed cm 13 from stock. so far, so good.
I decided to use the nightly updates so i downloaded the latest build from the built in updater(i also tried to install the nightlies manually but still no success)
The installation by itself did not show any errors but when i reboot the phone from the recovery(TWRP) it gets stuck in a bootloop. this happened with every nightly so far but when i clean installed them they worked fine.
Am i doing something wrong and does anybody experience the same issue?
i appriciate every tip on how to solve this problem because i am not going to clean install the nightlies and set up the phone over and over again
thanks in advance
Jurac aka. mynameisnotraphael

Have you tried wiping cache and dalvik?
Sent from my Moto G 2014 using Tapatalk