Database Develop

No 3G since FRF83

Any solution?
Only GPRS/EDGE does work, if 3G is available, it disconnects automatically until 3G isn't available.
Solution: Set to 2G-Only :-(
Anyone has the same problem?
I didn't have this problem with FRF 72.
Provider: Sunrise Switzerland
Radio: 32.36.00.28U_4.06.00.12_7

Have you tried going into your phone settings from *#*#4636#*#* and setting it to wcdma only? I did that on mine not too long ago and no more dropping to edge for me!
-------------------------------------
Sent via the XDA Tapatalk App

andi86 said:
Any solution?
Only GPRS/EDGE does work, if 3G is available, it disconnects automatically until 3G isn't available.
Solution: Set to 2G-Only :-(
Anyone has the same problem?
I didn't have this problem with FRF 72.
Provider: Sunrise Switzerland
Radio: 32.36.00.28U_4.06.00.12_7
Click to expand...
Click to collapse
does it lose complete signal? or does it show 3g still but just not doing anything?
Mine was working at first after flash. Then at about 2am it just kept trying to load then times out. Still shows 3g but just dont do anything. Im hoping its just tmobile messing with their towers... I dont see why it would work at first then not now..

The problem is, that i can only have a internet connection, when the phone is logged in into a gsm or edge network.
as soon as wcdma is available, the phone disconnects from the internet.

the signal is always available, but it looses the internet connection when it changes to 3G mode.
when the phone changes from 2G->3G mode, i see for 1s the 3G icon and then no icon will bi there.
when it changes back from 3G->2G, the EDGE/GPRS icon is visible again.

andi86 said:
the signal is always available, but it looses the internet connection when it changes to 3G mode.
when the phone changes from 2G->3G mode, i see for 1s the 3G icon and then no icon will bi there.
when it changes back from 3G->2G, the EDGE/GPRS icon is visible again.
Click to expand...
Click to collapse
ok thanks for clarification. My problem is different. I think related to phone company.. I still show the 3g signal and even have bars, but the pages dont load and eventually gives me the check your service and try again alert....
So Im hoping soon its working again for me... And I hope you as well figure it out.....

Thank you Good luck!

Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.

Thank you very much, thats the solution!!
Andi
ezhangin said:
Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.
Click to expand...
Click to collapse
Sent from my Nexus One using XDA App

ezhangin said:
Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.
Click to expand...
Click to collapse
Thank you. Updated to FRF83 this morning and I've had a full 3g signal, just couldn't pull data all day. Could over edge. Sure enough, GSM only was selected.
AT&T N1.

I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.

Lost Dog said:
I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.
Click to expand...
Click to collapse
Same issue here.
Switching to WCDMA preferred doesn't work for me though.....any help is welcome

I think it's a hardware problem with a lot of N1's.
Mine was ok the first 2 months, and later, 3g not working. This is driving me crazy ):
I have tried everything. Change the simcard, I did a reset of the data with my telcon, and nothing happens.
I've seen these problems on many N1's.
I hope google / htc release a fix for this problem.

Lost Dog said:
I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.
Click to expand...
Click to collapse
how bout checking your bands in the service menu. so *#*#4636#*#* -> phone info -> press the menu key for more options -> select bands -> choose one appropriate for your region (ie "USA BANDS").
If all else fails do a factory reset by going to the settings -> privacy -> restore factory defaults.. of course do a backup/sync/whatever before just to make sure you can get all your apps back.
There's other ways to do a factory reset via the bootloader .. its under recovery and you press up volume or the trackball I think and you can just select all the clear/erase settings there and that should clear out everything on the phone's internal storage.
The factory reset worked for me (via bootloader) when I upped from update-1 to FRF50 and didn't have any data icon next to my signal strength. Could call out but couldn't get data.
Hope that helps.

jasonpich said:
I think it's a hardware problem with a lot of N1's.
Mine was ok the first 2 months, and later, 3g not working. This is driving me crazy ):
I have tried everything. Change the simcard, I did a reset of the data with my telcon, and nothing happens.
I've seen these problems on many N1's.
I hope google / htc release a fix for this problem.
Click to expand...
Click to collapse
Check your APN settings. Do a full factory reset from the bootloader. If nothing works you should call tech support again. Most 3g issues where you have issues with connecting are service/signal level related. I *****ed early about my 3g issues on tmobile and it was the network as they've pretty much gone away with improving the backhaul in my area for HSDPA+ or updates to the phone's radio.
HTC is really really really cool about swapping phones and repairing them. If you feel you have a nexus that has hardware issues call them. I did this 3 times already (one time for minor cosmetic issues with the refurb they sent) and I couldn't be happier about how willing they were to replace/repair the phone. It turns out I really didn't have any issues with them at all.. with any issues with hardware from the second refurbished phone. It was service or software related and I'm happy to say with updates/tmobile service improvements I couldn't be happier with this phone.

blisk said:
Check your APN settings. Do a full factory reset from the bootloader. If nothing works you should call tech support again. Most 3g issues where you have issues with connecting are service/signal level related. I *****ed early about my 3g issues on tmobile and it was the network as they've pretty much gone away with improving the backhaul in my area for HSDPA+ or updates to the phone's radio.
HTC is really really really cool about swapping phones and repairing them. If you feel you have a nexus that has hardware issues call them. I did this 3 times already (one time for minor cosmetic issues with the refurb they sent) and I couldn't be happier about how willing they were to replace/repair the phone. It turns out I really didn't have any issues with them at all.. with any issues with hardware from the second refurbished phone. It was service or software related and I'm happy to say with updates/tmobile service improvements I couldn't be happier with this phone.
Click to expand...
Click to collapse
Thanks blisk, but the thing I don't understand is why Blackberry 9700 with T-Mobile bands, doesn't have problems at all ?
By the way, I rooted my phone , so the thing with the warranty it's complicated

I had it happen last night at work all night, but when i got home i checked my wife's tp2 and it also was doing the same thing so for levity wasn't the phone but tmobile. They started worming the same time also.... I think its tmobile.

Hello, I had the same problem with my imported n1. I'm using the tmobile version non rooted fully stock manually updated to frf83. I did a *#*#4636#*#* and selected wcdma only, rebooted and couldn't connect to my gsm network. Went in again and did a wcdma preferred, rebooted, and I works better, still changes fast to edge and G, but less often, I'm still trying it but I have high hopes its gonna be ok

Mmmm i did have problems with 3G too after pushing FRF83, but i found out that for some reason the APN settings weren't set correctly after the update. In my case the port setting after the proxy of the APN wasn't set, i changed to the correct value and it worked.
In conclusion, check your APN settings.

Just went from FRF72 to FRF83 and it's working fine.
I'm currently set to GSM auto (PRL) in the *#*#4636#*#* and I didn't change it to that after putting on FRF83.

N1 on Three (3) UK?

I've just moved to 3 in the UK (from vodafone) and I can't get a data connection - I get the error "Data connection lost" reported on several threads here, however my old vodafone SIM (which runs out on Tuesday) runs perfectly fine on 3G
on 3 the phone test (#*#*4636*#*#) shows HSDPA connection and the ping test FAILS (with no response)
on Vodafone I'm also on HSDPA - but the ping test succeeds
I'm on
stock Froyo FrF91 -
rooted and unlocked
32.36.00.28U_4.06.00.12.7 baseband
and 2.6.32.9-27227 kernel
So
Anyone have a clue what the issue might be?
If I can't get this fixed I'll have to move (AGAIN!) , off Three - and onto somewhere else. I'm sure there are other 3 users with N1's!
Graham

More bizarre
OK - this gets more bizarre - can anyone explain this?
Take my 3 SIM to 3 Shop - plug it into a 3 branded HTC wildfire - and it works just fine. Use their 3 SIM from the HTC wildfire on my machine - and it work great. Plug my sim back into my N1n- it works just fine now. #*#*4636*#*# actually resolves my pings and get great transfer speed
All smiles
Drive home - check again - no name resolution occuring - no data download. still on HDSPA
:-(
WFT is going on here!!
G.

Hello,
I'm on Three with a N1 and unlocked custom Froyo Rom. Works fine for me. Question, are you getting 2g signal, can you make calls etc, is it only 3g you are having problems with?
Are you sure there is Three 3g signal in your area?
Settings>Wireless and Networks>Network Operators
Can you see it there?
Have you tried resetting your APN settings to default?
Settings>Wireless and Networks>Access Point Names>
Menu>Reset to Default
Let us know how you get on.
Cheers.

Have you tried "WCDMA Only" instead of "WCDMA Preferred"? Works better on 3 for me anyhow in Ireland.

jim29 said:
I'm on Three with a N1 and unlocked custom Froyo Rom. Works fine for me. Question, are you getting 2g signal, can you make calls etc, is it only 3g you are having problems with?
Are you sure there is Three 3g signal in your area?
Click to expand...
Click to collapse
Well on the stock froyo rom it doesn't differentiate between 3G and H,but I always get 3G displayed - with 4 bars. Can make calls - no problem
The diagnostics always shows HSDPCA (or whatever!)
however it won't ping or resolve from my house
I drive into town (1 mile) - and it works
I guess its a reception issue??
Phone physically gets hot with the 3 SIM in - at my house - and battery life is appalling (3 hours to flat) - so I guess its trying really hard to connect.
I defaulted the APN again and selected EURO band only - and still no luck. No data connection from my house.
3 network coverage map says I have good coverage - and (as I said) 4 bars in signal strength.
Odd
G.

cpm said:
Have you tried "WCDMA Only" instead of "WCDMA Preferred"? Works better on 3 for me anyhow in Ireland.
Click to expand...
Click to collapse
Remind me - I know I've seen that option somewhere - but I can't find it at the moment
Thx
G.

Set WCDMA Only the same menu you chose Euro Band from. It's a dropdown box.
It does sound like it could be a reception problem all right. There's also a new radio available which might provide stronger signals. Worth trying that too IMHO http://forum.xda-developers.com/showthread.php?t=723839
Sent from my Nexus One using XDA App

If u have 2g to make calls and Wifi for Data, then you might have to settle for that I guess, if your phone works 3g in one area and not another, I would say reception issue, do any of your mates have a Three phone they can test at your house?

Here's another tip, try the following...
Menu > Settings > Wireless & networks > Network operators
Select "Data roaming"
Choose "Select automatically" instead of 3
See how that goes.
PS I'm now using the new radio 5.08 I linked to above. Looks like I'm getting a stronger signal.
Sent from my Nexus One using XDA App

[Q] 3g problems nexus one

hello every body
i have this problem with my nexus one when i am connected to 3g service (umts,hsdpa,Etc'). i can't make calls or receive any calls, i can't use the internet (data) or get sms and Etc'. but i have full bars reception. when i check the vi in setting to "use only 2g" the phone work great.
i tried everything downgrade/upgrade roms,radios. i tried to go back to my first backup and even do PASSIMG but nothing help i googled it every where but nothing
please some one can help???
without 3g the smartphone is useless
thanks,
shushkis

What network you on? I would at least see how old the sim card is.
Lots of time if you have an older sim card it just can't handle a newer system.

I am connected through Orange IL
and i tried switching sims even with other networks.
and more the phone worked fine at the beginning it just happened i remember i switch to one of CY roms and it happened

Have you tried a full wipe and reinstall the rom?

yes of course i tried customized roms and stock roms but nothing helped

I would check your apn settings...

apn connected to taking or getting calls?
i thought it's just for internet connection

Its just a guess.
If its a problem on multiple ROMs, its likely to be either hardware or settings. Settings are cheaper and easier to test, and that's the only setting I can think of...?
Of course, doing a full wipe (including system), installing a new ROM, and testing before you restore any apps and settings may be another way to test, but since the apn settings are pre-baked into most ROMs, it wouldn't rule our the apn...?

OK I tried to put apn settings and it didnt help
you say hardware?
but when I check in settings "use only 2g" the transceiver works great .
maybe the nexus have two transceiver one for 2g and one for 3g?
seems un-logical

No there are two radios one for 3g and one for 2g because 2g is for calls and 3g for data but when 3G is unavailable the phone will use the 2g for the data.

The Same Trouble
shushkis,
I have the same trouble, my 3G connection works so bad, but if I use only 2g connection, all works good... I have no idea what happend with my N1. I have a N1 for 3G 850 (AT&T) model.
Thanks for advantage.

So maybe the problem is the hardware? if the N1 have two inidvidul transcivers?

I have also the same problem. I've tried many different roms and radios. I use 900/2100 3G. What's strang is that 3G works perfectly at home, but when moving to another tower I get emergency calls only warning. 2g works fine.

I just started having 3G issues at home. With 3G on the phone reboots like once an hour, but on 2G I've gone days without a reboot. My 3G signal is not the best at home, but I don't know why that would make the phone reboot. I'm on T-Mo USA.

bobbyphoenix said:
I just started having 3G issues at home. With 3G on the phone reboots like once an hour, but on 2G I've gone days without a reboot. My 3G signal is not the best at home, but I don't know why that would make the phone reboot. I'm on T-Mo USA.
Click to expand...
Click to collapse
Go get a new SIM card...

danger-rat said:
Go get a new SIM card...
Click to expand...
Click to collapse
The one I'm using is only a couple months old, and it works well in my Desire HD, and my Moto Defy. It's only the N1, but I guess maybe it could be that. I'll look into more.

If it's only a few months old, then it may nor be the SIM that is the problem. I suggested it because a number of T-Mo users were having similar problems after a recent network upgrade, and a new SIM seems to fix the issue for most...

Droid 4 On Rogers Wireless (Canada) - Incoming "Pay Phone" caller ID Solution

Droid 4 On Rogers Wireless (Canada) - Incoming "Pay Phone" caller ID Solution
I recently got my XT894, Droid 4 in the mail, and hooked it up to Rogers Wireless in Canada.
When I was receiving phone calls, the built in dialer would tell me that "Pay Phone" is calling, the solution to contact the Rogers Customer Care, and have them remove the "Name Display" option.
Rogers has 2 services for call display:
Name Display (which does a phonebook lookup from Roger's Side)
Call Display (the number of the dialer who is trying to dial you)
Most motorola radios don't actually support these 2 features together, so Blur reads it as "Pay Phone". After contacting Customer Service, have them remove ONLY "Name Display". I restarted my phone then everything started working properly again.
I hope this helps someone!

First off, I wanted to say that I'm on the leak 6.16.206
I also got mobile hotspot working on Rogers (this solution may apply to other rooted users running on different providers).
I added the APN settings as defined originally here: http://forum.xda-developers.com/showpost.php?p=20366961&postcount=2
Name: Rogers Tethering
APN: isp.apn
MCC: 302
MNC: 720
APN type: dun
otherwise, any other fields are showing as <not set> OR None
When I tried to add dun to the apn type, the moto UI told me only providers could add DUN types, so I went into SQLite Editor -> Phone/Messaging Storage -> telephony.db -> carriers -> Located the last APN which I added manually, scrolled over to "type" then long pressed that field, chose "edit field" and added dun. Once completed, I restarted my phone. I now have the stock mobile hotspot app working (I had to also disable the entitlement check earlier) on Rogers!

Now wait, you got a Droid 4 working on Rogers????

bean1975 said:
Now wait, you got a Droid 4 working on Rogers????
Click to expand...
Click to collapse
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS

I can confirm that the Droid 4 works on Rogers. Took a week of fiddling, but it works.
Received the Droid 4 with 2.3.4 installed. Did the over-the-air updates to 4.0.4. Rooted it, installed SafeStrap 3, and installed Olegfusion's CM10/JB ROM (4.1.2), and was off to the races. Shows "E", "3G", and "H" when accessing the Internet.

have you ever try with stock kernel?
I wonder not to update to CM10 right now. I have a problem, it seems to connect, 3G/H letter, bu no tranmition. I have an old jaj, Droid3 working perfectly with same APN records.
Any thing that could help me??

danifunker said:
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS
Click to expand...
Click to collapse
Please help... What does that mean?????
(I'm an imbecile about this stuff!)

heymon79 said:
Please help... What does that mean?????
(I'm an imbecile about this stuff!)
Click to expand...
Click to collapse
LTE on this phone is not compatible with the Rogers network. If you want a Rogers LTE phone, pickup the Motorola RAZR HD. The phone will operate on 3G or 3.5G, although we in Canada consider HSPA+ to be "4G".
LTE can give you rates of up to 100mbps usually gives you about 25-30mbps
HSPA+ can give you rates up to 12-15mbps I usually get 4-5mbps
I hope that helps!

how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?

imeem said:
how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?
Click to expand...
Click to collapse
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html

danifunker said:
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html
Click to expand...
Click to collapse
so you're saying that all droid 4 are already unlocked?

Yes. They are still blocked against US GSM carriers but will work fine everywhere else, no locks.
Sent from my DROID4 using Tapatalk

Maybe someone can help me, I'm on Rogers. I have this same issue on Stock ICS .217 and on CM10. I can make phone calls and send text messages, but I cannot receive either. When I put my sim card in to another phone, I start getting my text messages. Any ideas on how to remedy this?

Have you tried another SIM card in your phone? Sounds like you have something wired. I would also check to make sure you are in global mode on the phone.
Sent from my XT894 running CM10

BTW where did u guys get your droid 4 if you're from canada? from ebay?

imeem said:
BTW where did u guys get your droid 4 if you're from canada? from ebay?
Click to expand...
Click to collapse
I got mine from xda but now that's closed...
Sent from my XT894 running CM10

eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.

Terrible Reception on Telus (stock 217, -100dBm)
bean1975 said:
eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.
Click to expand...
Click to collapse
I went through the process today and got my stock Verizon 217 Droid 4 working on Telus. I verified the Telus APN settings, went through forcing GSM/UMTS and UMTS-only mode, but still have terrible reception: 1-2 bars, -100dbM. Any thoughts for getting better signal?

[SOLVED] DROID 4 Canada SMS/voice only, no data on Rogers/Fido - help!
SOLVED! see below.
Droid 4 from Ebay, $135 or something + shipping. Replacing my string of bad luck with i927's from smartphone_wholesale (aka Cell Phone Forever) on ebay (tho the 1st one they sent was great til i lost it).
SMS/Voice is fine but cannot do any cell data on it. Following all settings on fido's site for APNs the fido-core-appl1.apn doesnt work. Had to manually put it in (APN list was blank). Tried my wife's Roger's sim, it populated the APN list itself (4 of them, all combos of internet w or w/o MMS, and rogers +/- 'internet' in the name). None of them work either (they match what's in the fora here and on the rogers site, rogers-core-appl1.apn etc).
Im a bit of a newb: is my phone not unlocked properly or something? What gives? Radio is set to global or GSM/UMTS (CDMA doenst work of course). What's the solution here?
System version: 98.72.18.XT894.Verizon.en.US
Android Version: 4.1.2
Baseband Version: CMDA_N_05.25.00R LTEDC_UI_09.1D.00
Kernel: 3.0.8-g473e586
Build #: 9.8.20-72_VZW-18 Feb 8 13:11:57 2013
yes mobile data is on (and roaming set to yes but phone states it's not roaming now)
every time i've added apn's and saved i've rebooted (and rebooted twice with wife's SIM in too, in case settings had to go sim -> phone + reboot, etc). No luck any way ive tried.
Thanks for help.
[UPDATE]
belay that request cadet!
Ok I just removed the wife's sim and put mine in, rebooted, and this sim (fido) doesnt populate the APN list. I was in the middle of inputting settings for it, hadn't finished and a buncha text+ came in and wifi is off (I saw I was on Edge, big blue E on status bar). Then before I could even react I had hit save, and data turned off.
Yep, removing "internet" from the APN 'type' works fine. Leave it blank.
W t f. Maybe someone can explain that shiz to me.

[Q] 4G or LTE with Straight Talk AT&T?

After weeks of playing around with build.props, APNs, and patches, on custom ROMs and stock, I am still attempting to get faster and more consistent data.
4G and LTE are supposed to be possible, but I can't figure it out.
I can get around 5 Mbps down using WCDMA only, but the very next moment in the same spot could be something entirely different.
My mobile data goes out quite often where it is just the outline of a triangle. I have never seen any other letters besides an E and a H.
I am currently on stable CM 10.2.1 installed on a newly created and wiped SS Slot 1, and have been for about a week and a half.
I used default network = 0 in build.prop this time around.
I finally managed to get my phone to recognize my SIM card while using the following configuration:
default network in Phone Testing = LTE/GSM/CDMA auto (PRL) and
preferred network mode in Mobile Network Settings = Global (CDMA/EVDO/LTE/GSM/WCDMA).
It acted really strange at first but the settings stayed even after a handful of reboots.
I am using Straight Talk's current APN settings (tfdata).
My dBm is constantly going from about -90 something to -108 and my asu ranges from around 3 to 14.
Before I just now rebooted, and every so often, it shows 2147483647 dBm and 255 asu; I have only just noticed this in the past few days, however. It is now back to -101 dBm and 6 asu after restarting.
I have attached screenshots of it doing that and a shot of "normalcy", as well as my last few speed tests.
Can anyone tell me what I might be doing wrong?
Should I try default network = 10 again in build.prop?
Or could anyone provide a copy of a build.prop working on all possible network modes (with the ability to edit APNs)?
Thanks in advance. I will take any and all advice or opinions.
I am so over trying to figure this out! When I really need my mobile data, it doesn't work!

I have attached a couple of graphs of my signal highs/lows etc. These results are from the Real Signal app.
I don't really know what they mean, but I am hoping they might shed some light on my issue and I'll get an answer from someone.
Sent from my XT875 using xda app-developers app

How are you getting it to get edge data? On mine I either have HSPA or nothing. Is there a way to make it default automatically to edge when the HSPA signal gets weak. I tried using liquid smooth 4.2.2 and changed it to 2g only and never could get signal. Change it to auto and get HSPA again
Sent from my Nexus S using xda app-developers app

should i take the bionic out office space style?
twfs said:
How are you getting it to get edge data? On mine I either have HSPA or nothing. Is there a way to make it default automatically to edge when the HSPA signal gets weak. I tried using liquid smooth 4.2.2 and changed it to 2g only and never could get signal. Change it to auto and get HSPA again
Click to expand...
Click to collapse
Not really sure how, and when it is on Edge, data hardly works anyway, so I probably can't help you there.
But I do have default network = 10. Only other thing I changed was telephony.lteOnCdmaDevice=0 to get the APN menu under mobile networks.
However, at the moment (and the majority of moments), with Wi-fi off, I have no data, -109 dBm, 5 asu, GPRS service is disconnected, and my phone number is "unknown", so I am definitely not in the position for giving suggestions.
Am going to try CM 11 again today, but I was hoping for some answers before doing anything other than installing..
I will ask more specific questions in the hopes that someone, anyone, can provide some sort of idea for at least 1 of them..
Is it even possible for the Bionic to have consistent, non-frustrating access to 2G, 3G, 4G, and LTE when unlocked for the AT&T or T-Mobile networks using Straight Talk?
Is there a way to enable the APN menu without changing the build.prop?
Does anyone have a targa build.prop (entire thing or line changes) of phone that has reliable data, etc. working on 2G, 3G, 4G, and LTE?
Could it be an issue with the SIM card itself?
Am I even approaching this from the right angle?
Should I just give up and get a new phone?
Thanks in advance.

Patch Idea
I am a novice at best and that may be a stretch.
BUT. Both of my Bionics are running on Straight Talk AT&T 4G sim cards.
One is a hardware REV-B the other is hardware REV-C.
The REV-C is rooted and running on the Jelly Bean stock rom.
The REV-B is rooted and running on a MoKee MK4.4 KitKat Release that I downloaded
from their site and opened in "Safestrap".
I do not think that I have achieved 4G yet however,
I do have fairly stable signal and data since
I installed a CDMA to GSM patch that I found searching these forums.
It includes Straight Talk and AT&T APN!
I am not aloud to post links yet. But if you search for these things here you will probably find them fairly quickly.
I would love to know if you can achieve 4G!
Good Luck!
Netzerite