DETAILS:
-Build from siyah S3 1.9.1 kernel source.
-Enabled kernel KSM support.
-Enabled cleancache support.
-supports STweaks v1.1
-enabled 500MB Zram with zcache
-zram with SNAPPY compression as first swap priority
(LOW CPU LOAD FOR COMPRESSION of ram memory blocks with little loss of compression ratio compared to default LZO compression)
-swappiness set to 100
-optional script to enable preloadSWAP as second swap priority (dont use this if you use dualboot else you will lose /cache of second rom)
(preloadSWAP is making use of /preload as swap partition)
source: https://github.com/psndna88/AGNi-pureKERNEL-I9300
BUGS: d:
- wifi hotspot not working on CM ... (i havent looked at this yet)
- no support for Sammy 4.2.1 rom unless its kernel souce released !
SCREENSHOT:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> < Zram with preloadSWAP >
CREDITS:
gokhanmoral for siyah source
CM team
adishakthi for 'AGNi'
R: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) STILL WIP
Sorry but where is the download link
Sent from my GT-I9300 using xda premium
valerio.tosti said:
Sorry but where is the download link
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
its still WIP=work in progress... i dont wish to publish a half tested kernel...
edit: ive put it up for brave users !
psndna88 said:
its still WIP=work in progress... i dont wish to publish a half tested kernel...
Click to expand...
Click to collapse
At this forum, we don't like placeholders. Post what you have or this thread will be locked.
Theshawty said:
At this forum, we don't like placeholders. Post what you have or this thread will be locked.
Click to expand...
Click to collapse
alright I hav put it....
brave users can test it
psndna88 said:
alright I hav put it....
brave users can test it
Click to expand...
Click to collapse
It does not boot on MIUI_Polymorph's MIUI v5 (Which I assume is Sammy Based with a CM10 Base Rom)
It functions fully on CM 10.1 except mounting (mentioned in op)
I did not test anything else.
sewer56lol said:
It does not boot on MIUI_Polymorph's MIUI v5 (Which I assume is Sammy Based with a CM10 Base Rom)
It functions fully on CM 10.1 except mounting (mentioned in op)
I did not test anything else.
Click to expand...
Click to collapse
Curent versions of _miui.polimorph_ are CM10 (4.1.x) based. This kernel is for CM10.1 (4.2.x). That might be one reason for not booting.
@psndna: By the way, is there any possibility to also make this compatible with CM10?
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
cm 4.2.2 looks good with this kernel but boot sucessful with sammy 4.1.2 rom?
Sent from my SHW-M440S using Tapatalk 2
thanks for the kernel.. works great as im able to overclock and use previous siyah's kernel settings again.. just worth noting, there seems to be an issue with the backlight buttons as they stay enabled even when disabling the option in advanced menu..
(CM10.1 4.2.2)
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
Polimorph, the kernel is described to be based on Siyah sources and only improved for latest CM10.1 meaning it is multiboot.
Siyah supports Sammy 4.1.1-4.1.2 and CM10/10.1
Sent from my GT-I9300 using xda app-developers app
Awesome work, thanks!
I've always said that a Multi-Boot kernel (even if its only for CM roms) is very important.
BTW, have any benchmarks about the new Mali drivers? What's the big difference?
Thanks PSN!
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
it doesn't work with sammy rom regardless of 4.1.x and 4.2.x...I got always black screen.
Sent from my SHW-M440S using Tapatalk 2
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
So the kernel is working for a single rom but not for dual boot?
Enviado de meu GT-I9300 usando o Tapatalk 2
R: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
Work whit Temasek rom v82
Sent from my GT-I9300 using xda app-developers app
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
Nice temp fix! even the GPU overclocking works with carbon ROM 1.5. Well, at least the first 4 steps hope gm comes back on soon!
Sent from my GT-I9300 using Tapatalk 2
sungc007 said:
it doesn't work with sammy rom regardless of 4.1.x and 4.2.x...I got always black screen.
Sent from my SHW-M440S using Tapatalk 2
Click to expand...
Click to collapse
same here...
4.1.2 official won't boot with this kernel.
It gives black screen.
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
sungc007 said:
it doesn't work with sammy rom regardless of 4.1.x and 4.2.x...I got always black screen.
Sent from my SHW-M440S using Tapatalk 2
Click to expand...
Click to collapse
Where did u get 4.2.x Samsung rom?
Sent from my GT-I9300 using Tapatalk 2
Re: [KERNEL][4.2.x]PSN>> AGNi pureKERNEL (siyah-based) TESTING STAGE
I'm yet to test on Sammy 4.2.1 ....
I'm in process of applying changes to siyah initramfs structure in code where it applies rom-type specific initramfs...
Info: as this kernel has new Mali drivers... It will work only in ROMs using kernels with new Mali drivers. Old Mali roms will not work.
Sent from I9300 Stock based Ultimarom v11 4.1.2 + my compiled Siyah Kernel v1.8.9 with KSM & cleancache support.
th3g0d said:
Where did u get 4.2.x Samsung rom?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
You're outdated. Please search it yourself at sammobile.
Related
Intro
I made this kernel to enhance my device and add some features that Samsung was removed.
This kernel is forked from stock Samsung's P6800 source code released.
The main feature of this kernel is the removal of the brick bug. So running this kernel your device is free from that bug.
More tweaks, optimizations coming.
Disclaimer
I am not responsible if you brick your device. Everything you do is your responsibility.
This kernel is made for the GT-P6800 only. It will not work in any other device. If you flash into another device, it will brick.
I have no time to help anybody unbrikng their devices. So flash it only if you know what you're doing.
I work on this project in my free time, so: Do not ask for ETA.
Features
AROMA Installer.
Option to disable boot sound.
nls_utf8
cifs
isofs
udf
Undervolting (UV) support. Undervolt with SetCPU, CPUMaster, etc
Optimized for size
Removed LOTS of debug info from the kernel
Support for bootanimation. Place the bootanimation.zip in /system/media folder.
Support for /etc/init.d/S* scripts
Default cpu scaling governor set to pegasusq
Kernel compiled with "-O2 -fomit-frame-pointer" CFLAGS
pegasusq cpu scalling governor
interactive cpu scalling governor
MMC_CAP_ERASE feature removed from drivers/mmc/host/mshci.c (brick bug fix)
Code:
//mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
mmc->caps |= MMC_CAP_SDIO_IRQ; // Brick Bug Fix
Compatibility list
It seems to work on all stock ICS releases or derived custom ROMs.
CM9 - Not tested (may not works)
CM10 - Not tested (may not works)
ZTOLP3 - Tested: Works
Singha - Tested: Works - Thanks to melorib.
Zeta V4 - Tested: Works - Thanks to melorib.
DXLP7 - Tested: Works - Thanks to theerachai.
DDLP5 - Tested: Works
ZSLP7 - Tested: Works - Thanks to hkfriends.
XXLQ2 - Tested: Works
XXLQ1 - Tested: Works
Install
Go into CWM.
Make a nandroid backup.
Install zip from sdcard.
Problems
Go into CWM-> Advanced restore -> restore boot.
Changelog:
v10
Fixed /system/etc/init.d/S* scripts not running.
Option to disable boot sound.
Added custom bootanimation. (PLEASE make a better bootanimation.)
Added option in AROMA installer to auto reboot after install.
v9
nls_utf8 module added.
auto load cifs module.
auto load usofs module.
auto load udf module.
auto load nls_utf8 module.
v8
cifs module added.
isofs module added.
udf module added.
v7.1
AROMA Installer.
v7
Added undervolting support.
v6
Fixed missing cpufreq interactive governor in v4.
v5
Kernel modules moved from zImage to /system/lib/modules.
Fixed modules not loading bug in v4.
v4
Optimized for size.
Removed unused options/modules in kernel.
CFLAGS changed from -O3 to -O2 resulting in a smaller kernel.
Removed LOTS of debug info from the kernel.
Enabled bootanimation.
Enabled /etc/init.d/S* scripts.
v3
Default cpu scaling governor set to pegasusq.
Kernel compiled with "-O3 -fomit-frame-pointer" CFLAGS.
v2
pegasusq cpu scalling governor added.
interactive cpu scalling governor added.
v1
MMC_CAP_ERASE removed.
Code:
//mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
mmc->caps |= MMC_CAP_SDIO_IRQ; // Brick Bug Fix
Download:
v10: http://4by.in/F (2012-09-18)
v9: http://4by.in/E (2012-09-17)
v8: http://4by.in/D (2012-09-14)
v7.1 AROMA INSTALLER: http://4by.in/C (2012-09-12)
v7: http://4by.in/B (2012-09-12)
v6: http://4by.in/A (2012-09-05)
v5: http://4by.in/10 (2012-09-03)
v4: Buggy. Not released.
v3: http://4by.in/8 (2012-08-24)
v2: http://4by.in/7 (2012-08-23)
v1: http://4by.in/6 (2012-08-22)
Very Special Thanks
mengpo for his GREAT tutorial about kernel compiling.
dedraks said:
This is my first kernel.
It's the uses the stock Samsung config.
The only change is the MMC_CAP_ERASE feature disabled. That feature is known as a cause of the brick bug.
drivers/mmc/host/mshci.c:
Code:
//mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
mmc->caps |= MMC_CAP_SDIO_IRQ; // Brick Bug Fix
I'm not responsible for any damage, use at your own risk, blah blah blah
Go into CWM.
Make a nandroid backup.
Install zip from sdcard.
Problems? Go into CWM-> Advanced restore -> restore boot.
Changelog:
Code:
[b]build 1[/b]
MMC_CAP_ERASE removed
Download:
http://*******/C8QAJ
Click to expand...
Click to collapse
I wanted to do this but is this really fix the brick bug ?
Great dedraks...thanks very much
Good to info it only for TW Base NOT CM Base?
Try on:
- Official Stock LQ1
- Locerra's CWMR v5.x.x (Old CWM)
- Clear cache and dalvik
- SetCPU error. In setting clear data and force close. Relaunch..Fixed
Just trying
- Antutu score 7073
- Tegrak Overclock module - Cant load/error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Astrix Ashburn said:
- Tegrak Overclock module - Cant load/error
Click to expand...
Click to collapse
From tegrak's XDA post:
(x) The latest kernel source of Galaxy S II on Samsung Opensource Release Center is not compatible with latest rom's kernel. So, this time, this app can't be used with kernels that built from source code.
Click to expand...
Click to collapse
Enviado de meu GT-P6800 usando o Tapatalk 2
Update. See OP.
dedraks said:
Update. See OP.
Click to expand...
Click to collapse
Great...Morn here
Will for sure will test it..after work in the eve
If I am not mistaken the 7.7 has a separate recovery partition that uses its own modified kernel so removing the brick bug from the running kernel does not completely solve the problem.
Sent from my GT-P6800 using xda premium
dedraks said:
Update. See OP.
Click to expand...
Click to collapse
Is this compatible with HC or is just for ICS? Thanks!
freaksamael said:
Is this compatible with HC or is just for ICS? Thanks!
Click to expand...
Click to collapse
Only for ICS...tested on LQ2 and LQ1
Downloading now and will try on LP7 ROM..
kishd said:
If I am not mistaken the 7.7 has a separate recovery partition that uses its own modified kernel so removing the brick bug from the running kernel does not completely solve the problem.
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
You are right. The recovery uses its own kernel, so you need a bug free recovery like locera's one.
Enviado de meu GT-P6800 usando o Tapatalk 2
dedraks said:
You are right. The recovery uses its own kernel, so you need a bug free recovery like locera's one.
Enviado de meu GT-P6800 usando o Tapatalk 2
Click to expand...
Click to collapse
If i was to use locera's recovery and this kernel would i be pretty safe from the brick bug?
Update. See OP.
nutley said:
If i was to use locera's recovery and this kernel would i be pretty safe from the brick bug?
Click to expand...
Click to collapse
ok.
Is it work on any stock ics only or with custom sammy ics rom or aosp ics rom?....
Sent from my GT-I9300 using xda premium
---------- Post added at 03:32 AM ---------- Previous post was at 03:29 AM ----------
alxwlc said:
Downloading now and will try on LP7 ROM..
Click to expand...
Click to collapse
So, how is it bro?...any news?..tq
Sent from my GT-I9300 using xda premium
Works in stock ICS ROMs.
Tested in LQ1 e LQ2 ROMs.
dedraks said:
Works in stock ICS ROMs.
Tested in LQ1 e LQ2 ROMs.
Click to expand...
Click to collapse
Ok... hope it work also on LP7 stock ics...
Sent from my GT-I9300 using xda premium
ZSLP7 is working fine.
dedraks said:
Intro
Download:
v3: http://4by.in/8 (2012-08-24)
v2: http://4by.in/7 (2012-08-23)
v1: http://4by.in/6 (2012-08-22)
Click to expand...
Click to collapse
wondering how to access the download links. when i click it, i get error. [using pc browsers, tab browser, and xda premium hd]
Any suggestion please?
Features:
-based on JB sources
-used MaxFu initramfs
-DISABLED CAP_ERASE (safe kernel)
-All-in-1kernel because it supports CM9, CM10, Samsung, MIUI and CM10.1 ROMs with a single kernel image.
-CWM recovery from legacy
-CPU Overclock/Undervolt support (Overclock to 1.6GHz)
-CPU governor optimizations
-Reduced boot time
-Better touch sensitivity
-Available CPU Governors: Pegasusq , Ondemand, Interactive and Conservative, Performance, Adaptive, Powersave
-CIFS as module
-Available I/O schedulers: CFQ, noop, Deadline, SIO
-J4FS as module
-Lots of I/O tweaks and filesystem optimizations .
-USB Mass Storage mode is working in CWM Recovery and you can mount both internal and external sdcard as a disk drive
-NTFS automounting for USB sticks. When you plug in an NTFS formatted USB flash it will be automatically mounted to /mnt/ntfs folder.
-Adjustable mDNIe settings
Click to expand...
Click to collapse
ROM Support:
- ICS (4.0.X):
TouchWiz Based: TouchWiz, MIUI
AOSP Based: CM9, AOKP, PA...
- JB (4.1.X):
TouchWiz Based: experimental support for TouchWiz JB Leak
AOSP Based: CM 10, 10.1, SlimBean, AOKP
Click to expand...
Click to collapse
Bugs:
-64GB cards.
-Vibration Strength not alterable on AOSP roms.
-Camera Service not work on TouchWiz JB Leaks.
-HOME button not work on TouchWiz JB Leak XXLSC.
-Phone.apk maybe FC in CM10.1
-An empty symlink /d to disabled debugfs found, didn't see any problem with this.
Click to expand...
Click to collapse
Features to be added in next builds:
-BLN support
-CPU/GPU Boost (will be avaible in 2nd build)
-Slide2wake
-GPU OC
-others...
Click to expand...
Click to collapse
I'm not responsable for any damage on your phone.U take the risk.
Source Code: http://sourceforge.net/projects/kangbangkernel/files/N7000/Build#1/?
Credits:
-Adi_Pat (many thanks bro!)
-MaxFu for the Initramfs
-Samsung
-Sakindia123
-dr.ketan
Donators
aftnoon2
Thanks a lot for supporting me !
Downloads:
-Build #1
-STD version
Kang-Bang-STD-B#1.zip
Kang-Bang-STD-B#1.tar
-OC version
Kang-Bang-OC-B#1.zip
Kang-Bang-OC-B#1.tar
Changelog
Build#1:
-initial build
PA 2.57 benchmark test:
Kang-Bang 1.4 ghz Ondemand
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hydracore N4 1.4 GHz Ondemand
Great news!
Sent from my GT-N7000 using xda app-developers app
Looks good, will be keeping my eye on this! BLN support will be brilliant!
keep it up...this is a great start:good:
Nice work alx !
R: [KERNEL][20JAN]Kang-Bang Kernel Build#1 [TW-CM9-CM10-CM10.1-PA]
Wow! Good news for our note!!!
Inviato dal mio GT-N7000 con Tapatalk 2
Thanks guys BTW press thanks button not only say thanks
Sent from my GT-N7000 using Tapatalk 2
Good work mate!
Keep going !
Sent from my GT-I9003 using xda app-developers app
can you implement cpu clocksteps into 12 steps or maybe 18 steps just like the badass siyah kernel? it would be a blast on our note.:laugh:
Ok,i will try,thanks for suggestion
Sent from my GT-N7000 using Tapatalk 2
Just flashed over SlimBean RC1 but getting error message on boot saying "process com.android.phone has stopped". Any suggestions?
Is a bug for 4.2.1...phone.apk FC...will fix in next build
Sent from my GT-N7000 using Tapatalk 2
Cool, cheers
Sent from my Nexus 7 using XDA Premium HD app
You should try Utacka PA 2.57 and this kernel, best performance
Sent from my GT-N7000 using Tapatalk 2
Who want 1.8 GHz OC?
Sent from my GT-N7000 using Tapatalk 2
AW: [KERNEL][20JAN]Kang-Bang Kernel Build#1 [TW-CM9-CM10-CM10.1-PA]
Sorry to say that, but I have no WiFi on the latest 4.1.2 paranoid ROM. And after I've flashed Thor kernel again it was available again...
Sent from my GT-N7000 using xda app-developers app
I can demonstrate to you that I got wifi working make sure u flashed correctly
Sent from my GT-N7000 using Tapatalk 2
AW: [KERNEL][20JAN]Kang-Bang Kernel Build#1 [TW-CM9-CM10-CM10.1-PA]
oblikas said:
I can demonstrate to you that I got wifi working make sure u flashed correctly
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
What do you mean with "right"?
Flashed via mobile Odin + wiped cache and dalvik.
I believe, your WiFi is working, but I tried several times to restart my note, but it won't help
Sent from my GT-N7000 using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi Guys!
I decided to share my kernel, so you don't need to work on to get it working with a new ROM.
This kernel can be used for every ICS+ AOSP ROM, but I've made a flashable version for every ROM type.
Features:
- Linux version 3.0.88
- ck1 patchset
- Compiled with Linaro 4.8.2
- OverClocked GPU (2D: 192Mhz -> 300Mhz, 3D: 245Mhz -> 353Mhz)
- OverClockable/UnderClockable CPU (122Mhz - 1401Mhz)
- 245Mhz - 1024Mhz, ondemand governor as default
- 9 governors: SmartAssV2, Lionheart, Smartmax, SmartAssH3, Ondemand, Conservative, Interactive, Performance, Userspace
- 5 schedulers: Noop, Deadline, Row, Cfq, Sio
- Ultra KSM
- O3 optimalization
- Dynamic FSYNC v1.2
- FauxSound
- Bluetooth Low Power Mode
- Fixed multitouch
- GPU+
- Sweep2Wake
- 2 Way Call Recorder
- Google Snappy compression in use
- Pumped up S5K3H1GX camera sensor's framerate to 120FPS
- Genlock, GPU drivers update from CAF
- Various backports from Linux 3.4, 3.9, 3.2 etc. (check Github )
- Many, many optimalizations (check Github again )
Click to expand...
Click to collapse
I think, that's all.
Kernel source: https://github.com/szezso/T.E.S.C.O-kernel_vivo
Downloads:
- For AOSP ICS based ROMs (CM9, etc.): http://d-h.st/Rk2
- For AOSP JB (4.1) based ROMs (CM10, MIUI v5, etc.): http://d-h.st/Kr5
- For AOSP JB (4.2) based ROMs (CM10.1, PACman, etc.): http://d-h.st/qjx
Be careful with the versions, or you'll get huge issues!
That's all, I hope, you'll enjoy this kernel!
nice..
szezso said:
- For AOSP ICS based ROMs (CM9, etc.): http://d-h.st/cJQ
- For AOSP JB (4.1) based ROMs (CM10, MIUI v5, etc.): http://d-h.st/VgL
- For AOSP JB (4.2) based ROMs (CM10.1, PACman, etc.): http://d-h.st/xOB
That's all, I hope, you'll enjoy this kernel!
Click to expand...
Click to collapse
Please someone tell me why Szeszo does not have recognized developer tag?
Great Work as usual Szeszo. Keep it up :good:
072665995 said:
Please someone tell me why Szeszo does not have recognized developer tag?
Great Work as usual Szeszo. Keep it up :good:
Click to expand...
Click to collapse
Not enough posts. They have revised the requirements.
tpbklake said:
Not enough posts. They have revised the requirements.
Click to expand...
Click to collapse
Aww that sucks Szeszo gave us so much and maybe a JB Sense kernel too :highfive:
Ah well. As long as I still have this phone, CyanVivo will be the Jellybean ROM for me :laugh:
tpbklake said:
Not enough posts. They have revised the requirements.
Click to expand...
Click to collapse
072665995 said:
Aww that sucks Szeszo gave us so much and maybe a JB Sense kernel too :highfive:
Ah well. As long as I still have this phone, CyanVivo will be the Jellybean ROM for me :laugh:
Click to expand...
Click to collapse
He also needs to apply himself whereas some of the other titles you can be nominated by others.
http://www.xda-developers.com/annou...ements-for-recognized-developer-applications/
Flashable zip in cwrecovery, yup?
And what change between 2.9+ and 2.9++?
Sent from my HTC Incredible S using Tapatalk 2 & Swype
babicz99 said:
Flashable zip in cwrecovery, yup?
And what change between 2.9+ and 2.9++?
Sent from my HTC Incredible S using Tapatalk 2 & Swype
Click to expand...
Click to collapse
Yup!
Sent from my Incredible S S710e using xda app-developers app
With tesco 2.9++ new pacman works much better
Sent from my HTC Incredible S using Tapatalk 2 & Swype
Why WiFi doesn't work in "N" mode.?
I mean that there is only 54Mb instead of 150Mb for a WiFi Connection, and doesn't want to connect to an AP which is set to N mode only.
Why.?
is it the "Kernel Thing".? (Current : TESCO 2.9++)
or ROM.? (I'm on CyanVivo 10.1 #06.26)
I clone sourcecode from github than compile but WiFi can't be used.
Sent from my Incredible S S710e using xda premium
chok_thewa said:
I clone sourcecode from github than compile but WiFi can't be used.
Sent from my Incredible S S710e using xda premium
Click to expand...
Click to collapse
Hi, which toolchain are you using, which files did you copy over (modules) and what path to your toolchain
eg. bin/arm-linux-whatever
poondog said:
Hi, which toolchain are you using, which files did you copy over (modules) and what path to your toolchain
eg. bin/arm-linux-whatever
Click to expand...
Click to collapse
I used linaro-4.8.2-2013.07 at path bin/arm-gnueabi-
and wifi module is bcmdhd.ko .
I can use Wifi with CyanVivo 10.1 build 31/07/2013 version 1 .
but for version 2 ,it can't be used .
but kernel version after compiled is 2.9+ not 2.9++ .
chok_thewa said:
I used linaro-4.8.2-2013.07 at path bin/arm-gnueabi-
and wifi module is bcmdhd.ko .
I can use Wifi with CyanVivo 10.1 build 31/07/2013 version 1 .
but for version 2 ,it can't be used .
but kernel version after compiled is 2.9+ not 2.9++ .
Click to expand...
Click to collapse
Have you got /bin/arm-eabi-? Try that. I had non working WiFi on my initial kernel many months ago because I used the wrong path like you
poondog said:
Have you got /bin/arm-eabi-? Try that. I had non working WiFi on my initial kernel many months ago because I used the wrong path like you
Click to expand...
Click to collapse
my full path in .bashrc is "export CROSS_COMPILE=~/android/kernel/toolchains/arm-gnueabi-linaro-4.8.2-2013.07/bin/arm-gnueabi-"
I used it for a month ,kernel which I built could be used in old version of CyanVivo but my new built kernel can't be used with latest version of CyanVivo .
I think it isn't the cause of this issue.
this Kernel does not support FSTRIM (Lagfix) Anyway to add that support here?
chok_thewa said:
my full path in .bashrc is "export CROSS_COMPILE=~/android/kernel/toolchains/arm-gnueabi-linaro-4.8.2-2013.07/bin/arm-gnueabi-"
I used it for a month ,kernel which I built could be used in old version of CyanVivo but my new built kernel can't be used with latest version of CyanVivo .
I think it isn't the cause of this issue.
Click to expand...
Click to collapse
Could you try compiling with arm-eabi-
jib_intelli said:
this Kernel does not support FSTRIM (Lagfix) Anyway to add that support here?
Click to expand...
Click to collapse
Why do you need that :-\
Its a ROM problem, you have to mount your system with root permissions and everything
Sent from my Nexus 7 using xda app-developers app
help!!!
I tried to flash this kernel... But, it stuck on boot animation.
My device detail:
Rom svhd v1.7.5
Kernel: redux 0.8 / kangaroo v 17
S- off
Radio: 3831.18.00.11_M
I tried to flash it from fastboot also... Still it stuck on boot animation.
Sorry! I forget... It's an AOSP kernel... Thanks AndyYan for remembering...
sudgai said:
I tried to flash this kernel... But, it stuck on boot animation.
My device detail:
Rom svhd v1.7.5
Kernel: redux 0.8 / kangaroo v 17
S- off
Radio: 3831.18.00.11_M
I tried to flash it from fastboot also... Still it stuck on boot animation.
Click to expand...
Click to collapse
Title says "AOSP only". And SVHD is not. Kangaroo is the kernel to stay.
Don't tell me that after you hang out on XDA so much, you still mistake Sense for AOSP...
Sent from Google Nexus 4 @ CM10.2
May someone try this kernel https://www.dropbox.com/s/w1lh50qc515xuqc/SZmodKernel_20130807.zip , it's fully compatible with TESCO 2.9++ .
I used TESCO 2.9++ as base and change memory allocate from SLUB to SLQB ,set BSD process accounting.
Compacache compress method from GZ to LZO .
I want feedback for this,better or not , or nothing different .
Announcement: On 10 June 2015 I discontinued the project as my Nexus S is broken and I don't own it anymore
Take the latest CyanogenMod boot files ("device" and "kernel"), add cherry picked mods and build it following the CM guidelines. This is Guru.
This is NOT: A bloated kernel with dozens of randomly picked mods and then compiled with an exotic toolchain.
CyanogenMod-only
Based on CM 11 M10
DISCLAIMER
I am not responsible for errors, bricked devices or black holes. Flash at your own risk.
Baked with love from Europe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest version: 1.0.1
CyanogenMod 11.0 M10 "device"
+ MTP support
CyanogenMod 11.0 M10 "kernel"
+ Extra-mem (396 MB)
+ SmartassV2 governor
+ Fastcharge (force AC) patch [it can be enabled with apps like Fast Charge]
+ Disabled CoreSight
Source code
https://github.com/ekerazha/android_device_samsung_crespo
https://github.com/ekerazha/android_kernel_samsung_crespo
Download
http://forum.xda-developers.com/devdb/project/?id=4603#downloads
Install
Method 1) Flash guru101.img with fastboot
Code:
fastboot flash boot guru101.img
Method 2) Flash guru101.zip with a modified recovery (e.g. CWM)
Note: At the moment I don't use the AnyKernel method, the whole boot partition will be overwritten. CyanogenMod-only
Changelog
Version 1.0.1 (2014-09-22)
- Sync to CyanogenMod 11.0 M10.
- Remove ugly hacks, decrease available RAM from 409 MB to 396 MB (try to fix camera issues). If you need more RAM, I recommend Greenify (Donation Package).
Version 1.0 (2014-07-26)
- Disable CoreSight (debug & trace).
Version 0.9.4 (2014-07-08)
- Sync to CyanogenMod 11.0 M8.
Version 0.9.3 (2014-06-27)
- Add fastcharge (force AC) patch.
Version 0.9.2 (2014-06-21)
- Increase available RAM from 390 MB to 409 MB (let me know if you have video playback or camera issues).
Version 0.9.1 (2014-06-17)
- Fix video playback and camera issues (decrease available RAM from 403 MB to 390 MB).
Version 0.9 (2014-06-15)
- Initial release.
Thanks to
The CyanogenMod team
tchaari (MTP support)
DerTeufel (Extra-mem)
erasmux (SmartassV2 governor)
abev66 & bedalus (SmartassV2 tweaks)
chad0989 (Fastcharge patch)
XDA:DevDB Information
Guru, Kernel for the Samsung Nexus S
Contributors
ekerazha
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: 1.0.1
Stable Release Date: 2014-09-22
Created 2014-06-15
Last Updated 2015-06-10
it's always nice to see developments for this old device
Thanks booo
Sent from my Nexus S using Tapatalk
Flashable ZIP added.
Nice performance profile.. This tests/feels faster than stock CM.. i/o tested a little lower compared to other KitKat compatible kernels, on par with CM... I will check out battery life...
Sent from my Nexus S using XDA Premium 4 mobile app
Setting.Out said:
i/o tested a little lower compared to other KitKat compatible kernels, on par with CM
Click to expand...
Click to collapse
Yes, there are no changes to I/O schedulers etc. it's the same as the stock CM 11 M7 kernel.
I can use it on 4.4.3 nightly ?
leap_ahead said:
I can use it on 4.4.3 nightly ?
Click to expand...
Click to collapse
There have been some minor changes to the kernel since CM 11.0 M7 has been released (see June commits: https://github.com/CyanogenMod/android_kernel_samsung_crespo/commits/cm-11.0) and I just tested the compiled build on CM 11.0 M7, however I think it should work fine. Before you try to flash it on a 4.4.3 nightly, do a full backup from CWM.
ekerazha said:
There have been some minor changes to the kernel since CM 11.0 M7 has been released (see June commits: https://github.com/CyanogenMod/android_kernel_samsung_crespo/commits/cm-11.0) and I just tested the compiled build on CM 11.0 M7, however I think it should work fine. Before you try to flash it on a 4.4.3 nightly, do a full backup from CWM.
Click to expand...
Click to collapse
ok I flash it 404mb ram and MTP
thanks !!
leap_ahead said:
ok I flash it 404mb ram !!
Click to expand...
Click to collapse
Nice :good: It's 403 MB on my M7
ekerazha said:
Nice :good: It's 403 MB on my M7
Click to expand...
Click to collapse
if u go to settings about is 403 on app run settings is 404
leap_ahead said:
if u go to settings about is 403 on app run settings is 404
Click to expand...
Click to collapse
Ok... I think that's because of different roundings, it's 403.85 MB on my device.
ekerazha said:
Ok... I think that's because of different roundings, it's 403.85 MB on my device.
Click to expand...
Click to collapse
again that kernel make difference to my device ! I use Fb and Fb neesenger and this more ram is all what need !!!!
leap_ahead said:
again that kernel make difference to my device ! I use Fb and Fb neesenger and this more ram is all what need !!!!
Click to expand...
Click to collapse
Yes, MTP support and the "bigmem" patch are the main reasons for which I started this project. I could use kernels like Devil or Marmite (for Nexus S), but they are discontinued projects and they are not in sync with the latest CyanogenMod commits. I just wanted a clean and updated CM kernel with the features I missed.
ekerazha said:
Yes, MTP support and the "bigmem" patch are the main reasons for which I started this project. I could use kernels like Devil or Marmite (for Nexus S), but they are discontinued projects and they are not in sync with the latest CyanogenMod commits. I just wanted a clean and updated CM kernel with the features I missed.
Click to expand...
Click to collapse
You Sir, should get an award !
Sent from my Nexus S using XDA Premium 4 mobile app
thanks for the kernel ..
feels a lot smoother ..
great work @ekerazha
?
•• sent from my thumb to your eyes ••
@schrickz You are a nice guy with a small defect: you support Juventus. Forza Inter
Thanks for this version.
Bln?
Forza Milan ?
Inviato dal mio Nexus S utilizzando Tapatalk
skinner12 said:
Bln?
Click to expand...
Click to collapse
Supported (inherited from the CyanogenMod kernel)
Ok, installed and it seems good..
Good work
Inviato dal mio Nexus S utilizzando Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello all, before I get into kernel features I would like to say that I am new to kernel development no knowledge at all ..just a weebie passing by to know some stuff. Changelogs in green
Kernel Features:
* Governors :
- SmartassH3
- Lulzactive
- Smartassv2
- HotPlug (Caused Several issues)
* IO Schedulers:
- SIO
- SIOPLUS
* Kernel Features:
- Only upto 1.3ghz (stock CM)
- Add SWAP support
- Add UKSM
- Added Seperate OC Kernel upto 1.6ghz[FOR ALL]
- Add CPU Boost Drivers
- Support for Lollipop
NOTE: The features listed above are same to all android versions of this kernel.
* Tested On :
- AOGP Nightlies
** Using SmartassH3/SIO runs smooth with great battery life.
***Post your reviews by trying this on other ROMs to make it better.
- Cosmic CM
** Using SmartassH3/SIO runs smooth with great battery life.
- CM12
** Using Lulzactive/SIO-PLUS runs smooth with great battery life.
How to Install :
- Flash it via CWM/TWRP/PHILZ etc.
Downloads :
Stock version will have "stock" Tag to it.
DOWNLOAD
Latest version will be on thread title
* Credits :
- pawitp for Kernel Tree
- k2wl my mentor
- xenon92 for inspiration with his nebula kernel
- koush for his flashable zip
HAIL HYDRA !!!!
XDA:DevDB Information
Frost, Kernel for the Samsung Galaxy Grand Duos i9082
Contributors
codekidX
Source Code: https://github.com/codekidX/android_kernel_frost_i9082
Kernel Special Features:
Version Information
Status: Stable
Created 2014-11-03
Last Updated 2016-02-19
Fabulous buddy.!!
Sent from my MI 3W using XDA Free mobile app
2nd to reply..... Awesome features........ Will try in some time .... Keep up the awesome work !!!
Ow, great work. : )
4th to reply ...superb Bro.
Governors & I/O schedulers explanation!
for those of u who don't understand what opting those "random texts" under Governors and I/O schedulers (that's what i USED to call them) will do to your device , head over here! Everything about governors and I/O schedulers and their respective features are explained in great detail!!
http://forum.xda-developers.com/showthread.php?t=1663809
Gr8 Job @codekidX Awesome So many Development On our Grand Duos Keep Up The Good Work
Question
Supports SWAP function or not???? Btw Working Fine awesome Kernel Brotha
Can I install on COSMIC CM 5.6 ????????
Memo Yasso said:
Can I install on COSMIC CM 5.6 ????????
Click to expand...
Click to collapse
Yep.
freakynexx said:
Supports SWAP function or not???? Btw Working Fine awesome Kernel Brotha
Click to expand...
Click to collapse
Thanks ...no I'll enable it in the next version
codekidX said:
Thanks ...no I'll enable it in the next version
Click to expand...
Click to collapse
Great work @codekidX
Amazing battery life on aogp
BTW can you optimize your kernel with linero toolchain??
Sent from my GT-I9082 using XDA Premium 4 mobile app
Reboots 9082L when trying to place a call. (4.2.2, Stock)
Paul_Days said:
Reboots 9082L when trying to place a call. (4.2.2, Stock)
Click to expand...
Click to collapse
Can you change the governor to something else and try to call again ?
To anyone ...
@codekidX...thanks brotha for this excellent kernel..I am using the one meant for Stock Rom..I found the OC to be 1.2 Ghz instead of 1.3...am I right? ?? Just asking...Though I don't think overclocking always helps thanks a lot again..
EDIT: I am also getting reboot as soon as i try to make any call..tried to change the governers but the result is the same
After I flashed the kernal for stock rom.the phone reboots when I try to make a call and recive a call
Sent from my GT-I9082 using Tapatalk
PROBLEM with this kernel
Can't make call and receive call on stock 4.2.2 rom.?
Please fix it as well as possible, this kernel is execellent?????????????:victory:t
Paul_Days said:
Reboots 9082L when trying to place a call. (4.2.2, Stock)
Click to expand...
Click to collapse
chinyeww said:
Can't make call and receive call on stock 4.2.2 rom.?
Please fix it as well as possible, this kernel is execellent�??????????:victory:t
Click to expand...
Click to collapse
wild firefire said:
After I flashed the kernal for stock rom.the phone reboots when I try to make a call and recive a call
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
SACHIN SHUKLA said:
@codekidX...thanks brotha for this excellent kernel..I am using the one meant for Stock Rom..I found the OC to be 1.2 Ghz instead of 1.3...am I right? ?? Just asking...Though I don't think overclocking always helps thanks a lot again..
EDIT: I am also getting reboot as soon as i try to make any call..tried to change the governers but the result is the same
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=2799524&d=1402834928
Flash the above file through recovery.
codekidX said:
Can you change the governor to something else and try to call again ?
To anyone ...
Click to expand...
Click to collapse
You forgot to include the prebuilt VoiceSolution.ko module to /system/libs/modules.
Attaching it here.
Can i install it in Touchwiz V8 ???
ADAWYA said:
Can i install it in Touchwiz V8 ???
Click to expand...
Click to collapse
As it's based on Stock. Yes. Just as precaution take backup before flashing.