hello all.
i have a strange problem on my diamond. in a few days i charge my phone in a new car kit.
and now i have the problem that i cant connet my phone to pc with usb cable. just with bluetooth.
but the phone charge me and the headspeak work fine
maybe the rom its not good anymore?
if i will make a hart reset the will solved my issue?
thanks for the help
derfler d
,,,,
1 more thing, when i charge the phone in the car he was getting hot. and i power off my phone and out my battery and start over my phone again.
aybe this burn something into the phone?
hi
was it a third party car kit?
sometimes when you start your car you can get a power surge though it and it burns the usb port.
This happen to me and I had to send it back to be fixed. (it cost me to fix it)
also have a look here it may help http://forum.xda-developers.com/showthread.php?t=457255&highlight=charging
i try to make a bootloader but i can't
so i i make a hard reset ?
and what will when i make it... this start my rom over again like the first time that i install it ?
ammm after i doin a hard reset its still doesn't work for me...
some 1 ? ...
have you tried a different USB cable.
I had a similar issue before and it turned out it was the USB cable itself.
yeah i try it...
Did you try it on another computer?
When you connect the phone to the USB port, do you get the popup asking how you would like to use it? *ActiveSync, USB Disk, internet sharing)
If you don't get one, check your settings: Start Menu -> Settings -> Connections -> USB to PC.
Check what the options are and if the "Ask me first about USB connection" is enabled.
Reconnect the phone and see if it works.
If it still doesn't work, you should check the Device Manager in your Windows computer (if you use one that is). See if the device is recognised. You can try to remove the device and reinstall the drivers for it.
ai try on snythere computer and nothing. the phone asking me about active,usb disk and internet sharing. and also nothing. so i thing that my usb connecting s burn imself. lucky that we have bluetooth, slowly but it fine... 10q for trying helping me
maybe this works
hi,
I had the same problem, try this:
go to preferences > connections > usb to pc > and uncheck the advanced networking checkbox.
After that it worked for me. BUT! I Was unable to connect to the internet on my phone through my usb cable!
So I just uninstalled active sync disconnected my phone, checked advanced networking back on again and reinstalled active sync, be sure to remove all previous pairings between your pc and your phone. I hope this works for you
greets Daan
ps always make a back up of your contacts and stuuf when uour doing these kind of things, active sync just sucks *****
nope, nothing...
**** man must be hardware:s i hope not.
cant think of anything else but to send it back for repair
good luck
im trying to connect my usb and it doesnt work i want to update to the official 2.1 since the other roms arent helping.... i just had this usb problem since i used aloyhius L please help when it connects it just chargers i tryed on 2 cords ... i got ask me on and off and i used disk drive and charge only modes
its still a problem ... its charging but doesnt read connection
make sure you have usb debugging enabled if you're trying to load a rom.... go to:
Settings > Applications > Development > Check the usb debugging box.
Try this widget. Put it on your homescreen then plug in your USB cord and hit it.
http://www.androlib.com/android.application.at-abraxas-mountusb-qqE.aspx
http://community.sprint.com/baw/thread/32304?start=0&tstart=0&reqsorting=dec
i think its a problem with the 2.1 upgrade
I recently flashed the ics f4k mod 4.0.4 and i must say it is the best rom i have used so far!!
i wanted to have internet on my Si9000 with the power cable connected to my pc!! Not a hot spot but to be able to have internet on my device ( i think it is called usb tethering)..
i searched all the rom commends and so far some ppl say that usb tethering works...
Can someone give me a detailed guide on how to enable it and what i must do in order to activate it??
Tnx in advance
I don't that particular firmware on my phone currently, but I think it's similiar to every ICS rom. Just plug in your phone to the computer and if the USB mass storage comes up, just press back button so you get back to the home screen. After that go to settings -> more.. -> tethering & portable hotspot -> and check the USB tethering. Then wait a couple of minutes for the computer to establish a connection and then see if it works. If not, try with USB debugging on or off.
P.S Make sure you have samsung drivers installed before trying.
Dear Genius - Developers - Friend - Specialist,
first of all I would like to say THANK YOU for all of your help.
You helped me to rescue my loved (Xperia arc S) and it was totally ****ed up.
But of course how could it be different, I´ve had made another mistake and I knew it was my fault...
But I need help __Urgently__
Problem :
Xperia Z is locked by a 3x3 Pattern-Lock
so far so good
But I have lost my Pattern, thus i´m confused and I don´t know how to deal with it.
Next my Computer doesn´t notices my Smartphone, although it is connected to the PC.
Possible Solutions:
Sony PC Companion isn´t working because I do not have a USB Connection
SUS is no longer available
The Problem is "The USB Connection"
I´ve opened the back door cover to look if it were bricked.
I do not have root or CWM or any other ROM
It is just the stock Rom...
I would be very happy if you can help to solve this....
ADB is not listening this phone...
I've got this problem with my old Arc S .My problem with Arc S was pm8058 (Power Management IC ) that was damaged and because of that IC i lost my USB Connection Completly.
Try to Connect A USB device with OTG cable if the phone Recognize The Device This Means you have data connection .
Example :Connect A USB mouse to phone if the pointer is shown on screen the USB Data link is working.
I think your problem is USB female Socket on Phone itself or Power Management IC that located on MainBoard.
Another thing :
Connect your Phone With USB Cable to a PC ,if the phone heats after about a minute the problem is IC.
Hello.
I installed a wrong firware and now the box doesnt work. It only shows the "AllWinner Tech A31 Quad-core" logo on startup and then it doesnt do anything else. My box doesnt have any brand and not even a serial number. The only references I have is:
Board Model: AW-X6-V1.2
CPU: Allwinner A31S ARM.
When I connect it to computer it only turn on the standby light!
I've been reading a lot looking for a solution but basically all the solutions I found it need to press the reset button and copy some software to a sd card. This is other part of the problem... this box doesnt have a reset button or sd card entry!!! It only have 2 USB, Lan and HDMI ports and video component.
Here are some photos of the board/box:
> Board/box front http://www.mediafire.com/view/gvv9eo83q9nnydo/2016-04-18 09.49.29.jpg
> Board/box back http://www.mediafire.com/view/ks1x8nwpuw7f8p6/2016-04-18 09.49.54.jpg
> Board/box top http://www.mediafire.com/view/8vt4aci94298gyc/2016-04-18 09.49.19.jpg
Can anyone help me fixing my android tv box?
Thanks,
Pedro
Could anyone help me???
Thanks