Related
How to solve? My SGS I9000 accidentaly off during downloading firmware upgrade. Now, when I switch on the phone, no Samsung and Galaxy S logo appeared, but the connected phone-pc icon appeared with warning icon in the middle. What can I do?
You have semi bricked it. you need to put it back in to download mode (vol down + home key + power button) press all 3 buttons at once. When in download mode reflash it again with Odin. If your 3 button doesn't work then you need a jig
Thanks for the reply.
Yeah.. 3 buttons doesn't work. I don't have any JIG right now. Maybe the best is go to Samsung Service Centre. Huu..
Plenty of jigs available on ebay or see the thread on here about making one
Anyone can verify this solution, is it work? Mine can't:
SOFT BRICK
Resolution
First off DO NOT PANIC. there is a simple solution, just remove the battery , plug the phone into the computer, press and hold volume down and it will enter download mode.
Click to expand...
Click to collapse
Source: forum.androidcentral.com/u-s-cellular-mesmerize/64681-how-full-system-wipe-restore-samsung-mesmerize.html
night_reader said:
Anyone can verify this solution, is it work? Mine can't:
Source: forum.androidcentral.com/u-s-cellular-mesmerize/64681-how-full-system-wipe-restore-samsung-mesmerize.html
Click to expand...
Click to collapse
You can't because it doesn't work that way. If you have a semi brick or brick (without the combo) you need a JIG/JTAG.
Other tricks like "heat the battery" "heat the Cellphone" or the one you pointed are just fake.
Hi
I've been having problems with the HOME button on my phone. I've been running PA2.51 on it so thought it was probably the ROM. I went to flash the newer 2.99 ROM from here:
http://forum.xda-developers.com/showthread.php?t=2115167
After I followed the instructions I rebooted the phone and now I'm stuck with loads of FC! I can't even reboot into recovery or download mode because the stupid HOME button doesn't work.
I don't know what to do??
Can anyone help or advise please? I'd want to get my files off the thing if I can't save it sigh
DaBountyHunter said:
Hi
I've been having problems with the HOME button on my phone. I've been running PA2.51 on it so thought it was probably the ROM. I went to flash the newer 2.99 ROM from here:
http://forum.xda-developers.com/showthread.php?t=2115167
After I followed the instructions I rebooted the phone and now I'm stuck with loads of FC! I can't even reboot into recovery or download mode because the stupid HOME button doesn't work.
I don't know what to do??
Can anyone help or advise please? I'd want to get my files off the thing if I can't save it sigh
Click to expand...
Click to collapse
just check out the "FAQ and troubleshooting" in post #3 of the rom.....
I did but I can't even get into recovery or download mode because of my dodgy HOME key. Is there no other way to force my phone into recovery by plugging it into the computer???
DaBountyHunter said:
I did but I can't even get into recovery or download mode because of my dodgy HOME key. Is there no other way to force my phone into recovery by plugging it into the computer???
Click to expand...
Click to collapse
okie.... do this IF USB DEBUGGING WAS ENABLED
> connect ur phone to pc using usb..
> now run CMD on pc...
> now type "adb reboot recovery"....
> wait for it to work...
now u should be in recovery
Thanks will try and give that a go. If this fails I'll have to get this sorted via insurance
EDIT: GAH! It can't find the device. Looks like I'm out of luck?
DaBountyHunter said:
Thanks will try and give that a go. If this fails I'll have to get this sorted via insurance
EDIT: GAH! It can't find the device. Looks like I'm out of luck?
Click to expand...
Click to collapse
if that also dosent work...
then if u know how to use PC odin.. u can pull ur battery out then reinsert it....
then hold down the VOLUME DOWN button and press the POWER BUTTON for 2 sec. and then release it ... but keep holding down the VOLUME DOWN button...
now u should be in download mode in which u can flash any other rom using PC odin..
gonna give download option a go. Thanks
Well that's rubbish I flashed the stock 4.0.4 ROM and it's stuck on the Samsung logo now. Really not my day today...
try flashing any GB stock rom
DaBountyHunter said:
Well that's rubbish I flashed the stock 4.0.4 ROM and it's stuck on the Samsung logo now. Really not my day today...
Click to expand...
Click to collapse
Install Philz kernel using recovery and do a factory reset.
Hello everybody, my phone doesn't start.
He starts just on mode downloading after branch in USB.
Help me please.
Sorry for my English.
if download mode works, try install stock rom through odin then u can do whatever u want
MariusiK31 said:
if download mode works, try install stock rom through odin then u can do whatever u want
Click to expand...
Click to collapse
I have already tried him and when he gives restart on Odin, my telephone does not start.
enzoo96 said:
Hello everybody, my phone doesn't start.
He starts just on mode downloading after branch in USB.
Help me please.
Sorry for my English.
Click to expand...
Click to collapse
try to take out battery for a minute then put it back and switch on
enzoo96 said:
I have already tried him and when he gives restart on Odin, my telephone does not start.
Click to expand...
Click to collapse
u mean bootloops or doesn't start at all ? can u enter cwm ?
MariusiK31 said:
u mean bootloops or doesn't start at all ? can u enter cwm ?
Click to expand...
Click to collapse
He does not start, and I can not enter it cwm
Hard brick?
If so, sending it to a Samsung Center is your best bet.
Sent from my CM7 GT-S5570I
NightRaven49 said:
Hard brick?
If so, sending it to a Samsung Center is your best bet.
Sent from my CM7 GT-S5570I
Click to expand...
Click to collapse
+1 it's hard bricked
same thing happen to me
I experience that too last 6months to be exact, as long as you can access download mode and it is readable by your laptop/computer you can fix it, download any ONE PACKAGE stock room in firmware.com then flash it via Odin after that process finish
go to cwm
just power button + home button
then reset and wipe
please feedback as soon as you do my tips thanks!
goodluck! :good::good:
grimmjowjak said:
I experience that too last 6months to be exact, as long as you can access download mode and it is readable by your laptop/computer you can fix it, download any ONE PACKAGE stock room in firmware.com then flash it via Odin after that process finish
go to cwm
just power button + home button
then reset and wipe
please feedback as soon as you do my tips thanks!
goodluck! :good::good:
Click to expand...
Click to collapse
I flashed and I can not go to cwm
enzoo96 said:
I flashed and I can not go to cwm
Click to expand...
Click to collapse
how about normal booting after flashing via odin?
grimmjowjak said:
how about normal booting after flashing via odin?
Click to expand...
Click to collapse
It's doesen't start
Blank Screen
I installed the wrong cwm on mine and when I tried to boot into recovery all I got was a blank screen, so I waited for a bit, then pulled the battery, turned phone on and nothing but a blank screen, tried getting into DL mode and nothing, but when I plug it into the PC, it wants to recognize as a modem instead. I think its toast, I even made a jig, tried getting into DL mode and nothing, the phone is on just no screen, it charges the battery when plugged into usb port but nothing on the screen. It had worked until I flashed cwm on it...
go to stock recovery
why don't you just enter into stock recovery and factory reset the phone , you can also flash the stock rom with odin after puting your phone in download mode . to go to recovery vol+ and vol- and power on the phone at te same time
Didn't you read? He has neither download nor recovery mode.
Sent from my CM7 GT-S5570I
hi all. i just install the Beta of ONEUI 2 and android 10 on my S10e, (using the update.zip with adb in recevery) and now my S10e is "bootlooping" with no acces to recovery and download mode... impossible for me at the moment to reflash a clean ROM with odin... can you help? or my phone is definitivly DEAD??? :/ thx you all...
Maybe you tell the situation in the correct thread, where you load the firmware?
There more dudes, who flashed the rom and known the bug (soft brick?).
I use the official beta of the android 10 firmware & can't directly support.
Good luck.
blazethelight said:
Maybe you tell the situation in the correct thread, where you load the firmware?
There more dudes, who flashed the rom and known the bug (soft brick?).
I use the official beta of the android 10 firmware & can't directly support.
Good luck.
Click to expand...
Click to collapse
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..
Nyzoka said:
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..
Click to expand...
Click to collapse
To enter download mode, put usb cable into your phone, press and hold vol down button without bixby button, make sure your screen comes to black(total shut down if its on bootloop), then put the usb cable into your pc. It should detect your phone
Nyzoka said:
hi all. i just install the Beta of ONEUI 2 and android 10 on my S10e, (using the update.zip with adb in recevery) and now my S10e is "bootlooping" with no acces to recovery and download mode... impossible for me at the moment to reflash a clean ROM with odin... can you help? or my phone is definitivly DEAD??? :/ thx you all...
Click to expand...
Click to collapse
Hi,the only thing you can do is reflash with odin.
It is because you had unlocked bootloader.
When you have unlocked bl and flash Q it will bootloop.
yesterday I had the same problem (update beta Q with BL unlock). I couldn't open either downloading mod or recovery. Bootloop. I left the phone "resting" overnight and tried again in the morning. Hold Volume- and Bixby together and then connect the PC cable. download mod opened(possibly a coincidence). Odin worked.
Odesláno z mého SM-G970F pomocí Tapatalk
thx you all
Nyzoka said:
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..
Click to expand...
Click to collapse
try letting the phone die then when bootloop stops inset cable and do the download mode combo, failing that when the device is looping does it connect sucsessfully to your computer because i had a similar experiance, at the samsung logo screen although display was looping adb commands did acually work, i then entered adb reboot download in cmd prompt and the download screen appeard and was odin compatible for a complete reflash of the firmware with magisk patched AP file
i hope this helps !! best of luck my friend
Are you fixed?
Nyzoka said:
thx you all
Click to expand...
Click to collapse
hello are you fixed? I have the same problem
marcelito29 said:
hello are you fixed? I have the same problem
Click to expand...
Click to collapse
there 3 of us
i have same problem, can not enter to any mode
marcelito29 said:
hello are you fixed? I have the same problem
Click to expand...
Click to collapse
Hello,
I've the same problem. To fix it :
- Go to recovery mode (when your phone is shutdown, press Bixby+Vol Up + Power and realase all after Samsung's Logo)
- Wipe Cache
- Wipe System
- Reboot System
I have the same problem on my Samsung Galaxy A7 2018. It keeps showing every 5 seconds the logo in an infinite bootloop and i cannot enter recovery or download mode. Any help?
Tantalord said:
I have the same problem on my Samsung Galaxy A7 2018. It keeps showing every 5 seconds the logo in an infinite bootloop and i cannot enter recovery or download mode. Any help?
Click to expand...
Click to collapse
sorry, i don't know if it's been fixed but if have read the thread you will noticed that there isn't a quick fix until you wait till the device goes off, then either your boot into recovery mode (wipe, cache, reset and reboot) or download mode (flash stock rom with odin).
xdagee said:
sorry, i don't know if it's been fixed but if have read the thread you will noticed that there isn't a quick fix until you wait till the device goes off, then either your boot into recovery mode (wipe, cache, reset and reboot) or download mode (flash stock rom with odin).
Click to expand...
Click to collapse
This is why I have hate not being take the battery out of a device. Atleast the S10 doesn't seem likes it's too hard, if it were me I probably just remove the back cover and pop the battery out rather than wait for the battery to die. The back cover seems to just snap off and on, almost like they could have just made it removable in the first place, but then of course too many people would just buy new batteries when they wear out rather than a new phone. Gotta love planned obsolescence.
hi, my x3 is dead, how to umbrick on EDL mode ??, any flash rom ?? THX
vampsoft said:
hi, my x3 is dead, how to umbrick on EDL mode ??, any flash rom ?? THX
Click to expand...
Click to collapse
Hi,
You can try with https://www.officialroms.com/oppo-find-x3-neo-5g-cph2207-flash-file/
But I didn't test it personally yet.
Let us know if it's working.
Regards
Talk to me hard brick or soft brick (bootloop)
I'll reply to myself try help. Hard brick (off no power) go on ebay buy a jig it will turn phone to download mode. Soft brick hold corresponding buttons and turn off then download mode buttons and get to download mode.
You clearly used a wrong ROM and your phone didn't take it or messed up the TWRP flash either way anything can be fixed
**** 1 more I've never fixed and it was a while ago but something birny I think don't flash over flash without clearing through TWRP I ****ed a phone doing it and never fixed it