Database Develop

HardBrick any idea to Revive my phone back

Help me..
Before this i use stock ROM 4.0.4 but yesterday i try to custom my phone with CM10 rom...i do step by step but then when i reboot my phone it can't display anything...i try connect with Odin PC but my phone cannot detect.
what should i do???

Dude if you want help please write some details
Sent from my GT-N7000 using xda premium

Did you install CM10 straight over official Ics? Or did you flash official GB with odin before flashing? Some details would be nice. What "step by step" guide did you use?
Sent from my GT-N7000

EG00 said:
Help me..
Before this i use stock ROM 4.0.4 but yesterday i try to custom my phone with CM10 rom...i do step by step but then when i reboot my phone it can't display anything...i try connect with Odin PC but my phone cannot detect.
what should i do???
Click to expand...
Click to collapse
If it does not turn on, there are not many options, except few things I have explained in a similar case from Emscar. Just somewhere near in the same section. Hope it helps.

forest1971 said:
If it does not turn on, there are not many options, except few things I have explained in a similar case from Emscar. Just somewhere near in the same section. Hope it helps.
Click to expand...
Click to collapse
Cinthiar said:
Did you install CM10 straight over official Ics? Or did you flash official GB with odin before flashing? Some details would be nice. What "step by step" guide did you use?
Sent from my GT-N7000
Click to expand...
Click to collapse
yes i install CM10 straight over official ICS..huhu

EG00 said:
yes i install CM10 straight over official ICS..huhu
Click to expand...
Click to collapse
Well you definitely didn't follow the CM10 installation instructions "step by step" since they say NOT to do this in bold red text.

Your 2 options are to send it for a motherboard replacement, or repartition and bypass the damaged sectors which means you'll lose 3 or so gb of rom space. Follow instructions to the letter at all times, short cuts invariably lead to total bricks especially when dealing with ics.
Sent from my GT-N7000 using xda premium

SpyderTracks said:
Your 2 options are to send it for a motherboard replacement, or repartition and bypass the damaged sectors which means you'll lose 3 or so gb of rom space. Follow instructions to the letter at all times, short cuts invariably lead to total bricks especially when dealing with ics.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
how to repartition??

EG00 said:
how to repartition??
Click to expand...
Click to collapse
Search mainly.... But I'm feeling unduly kind tonight so here you go...
http://forum.xda-developers.com/showthread.php?p=26428986
Sent from my GT-N7000 using xda premium

By the way - Where and when did you download the CM10 preview? Preview 2 should have been safe unless you were using a dangerous recovery (not CF-Root).
Preview 1 was removed by last Friday.

Entropy512 said:
By the way - Where and when did you download the CM10 preview? Preview 2 should have been safe unless you were using a dangerous recovery (not CF-Root).
Preview 1 was removed by last Friday.
Click to expand...
Click to collapse
the thread that i follow has been deleted...huhuhuhu..

Maybe you can use a USB JIG trick..then simply flash with ODIN..but if you encounter with NAND r/w corruption,bad news for you..but it still can be revive with repartition your galaxy note..

azrulnizam84 said:
Maybe you can use a USB JIG trick..then simply flash with ODIN..but if you encounter with NAND r/w corruption,bad news for you..but it still can be revive with repartition your galaxy note..
Click to expand...
Click to collapse
i hav USB Jig on my hand right now..but my phone did not hav any response..

Last option (otherthan motherboard replacement) is jtag riff-box. They have service in many country. Goodluck.

forest1971 said:
Last option (otherthan motherboard replacement) is jtag riff-box. They have service in many country. Goodluck.
Click to expand...
Click to collapse
jtag riff-box???

Yes,
http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-note-gtn7000-unbrick-dead-boot-repair-supported/&q=jtag+riff+n7000&sa=X&ei=P4MaUNnNMsyQiQfU2YHoBQ&ved=0CBUQFjAB

forest1971 said:
Yes,
http://www.jtagbox.com/jtag-news/ri...&sa=X&ei=P4MaUNnNMsyQiQfU2YHoBQ&ved=0CBUQFjAB
Click to expand...
Click to collapse
They'll just use usb jtsg approach, if not responded to yours, it's doubtful they'll have any luck. It's a true hard brick, only solution is mobo replacement.
Sent from my GT-N7000 using xda premium

[Q] bricked s5830

my phone is bricked at www.samsung.com and wont go past is neither to download mode or CWM5. What shall I do?
PS: i wasn't even changing roms, i was using DEMOCRACY for a while and everything went smooth with install. What can it be guys?
UPDATE: now it is in a loop from backlight to no light and even bluescreen! HELP PLEASE

Total Brick man ! Cant do anything

origikid said:
my phone is bricked at www.samsung.com and wont go past is neither to download mode or CWM5. What shall I do?
PS: i wasn't even changing roms, i was using DEMOCRACY for a while and everything went smooth with install. What can it be guys?
UPDATE: now it is in a loop from backlight to no light and even bluescreen! HELP PLEASE
Click to expand...
Click to collapse
I don't think it's bricked... Pull the battery and wait for about 5 seconds and try holding the power button + home. U should be able to get to recovery mode.
Sent from my GT-S5830 using xda premium

Greatness_GH said:
I don't think it's bricked... Pull the battery and wait for about 5 seconds and try holding the power button + home. U should be able to get to recovery mode.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
it didnt work. i think i will activate the warranty even though i think when you have rooted the device you loose it :x

origikid said:
it didnt work. i think i will activate the warranty even though i think when you have rooted the device you loose it :x
Click to expand...
Click to collapse
Well.... Tough luck bro... How can u re-activate ur warranty though? Anyways, all the best :thumbs up:
Sent from my GT-S5830 using xda premium

Greatness_GH said:
Well.... Tough luck bro... How can u re-activate ur warranty though? Anyways, all the best :thumbs up:
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I guess I will try my luck, since the device is so f**ing damn bricked they may not even get the chance to see that is a rooted phone.

origikid said:
I guess I will try my luck, since the device is so f**ing damn bricked they may not even get the chance to see that is a rooted phone.
Click to expand...
Click to collapse
Well... lets keep our fingers crossed then
Sent from my GT-S5830 using xda premium

I really doubt that Samsung is gonna help. I faced the same problem and they didn't bother even though I had 6 months of warranty left

How do i fix my Bricked phone !! URGENT

Hey guys, I'm having big problem and can't go to sleep
i tried flashing the new ROM (i've done it so many times that i wasn't scared of anything).... Rom installed the Kernel too and I cleaned cache after installation, but ! when i choose Restart Now option, it suddenly restarted (screen went black suddenly) and the BLANK___________________. :'(
Here are the things i did whole day :/
1-3Button's technique
2-Can't go in Download,Recovery Mode
3-Can't connect to PC
It's like a Plastic Toy now that has no functions
I don't even know what it is(Hard/Soft/Dead Bricked). I've read through web that it can b a SW/FW HangUp or Temporary Brick which can b fixed ?..
Please tell me how to fix this issue,I'm really nervous
Help would b appreciated...
-(sorry for bad eng-)

What ROM you flashed?
Sent from my GT-S5570 using Tapatalk 2

ROM causing this issue >=
I tried to install JellyBlast..
Infact i was checking different Rom's, i installed about 4 others before installing JellyBlast(> no problem yet occured) but after Installing JellyBlast, it's not waking up and nothing's working..
Am gonna make my Jig to wake it up, I've hopes for it.....
But can't find resistors anywhere :/
Sent from my GT-S5570 using Tapatalk 2[/QUOTE]
ast00 said:
What ROM you flashed?
Click to expand...
Click to collapse

OptimusDusky said:
I tried to install JellyBlast..
Infact i was checking different Rom's, i installed about 4 others before installing JellyBlast(> no problem yet occured) but after Installing JellyBlast, it's not waking up and nothing's working..
Am gonna make my Jig to wake it up, I've hopes for it.....
But can't find resistors anywhere :/
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
ast00 said:
What ROM you flashed?
Click to expand...
Click to collapse
Its hard bricked: (
Jelly blast is for galaxy mini plus not the galaxy mini .
So you u flashed another device's rom.
Sent from my GT-S5570

(it is not possible) but maybe your key combo have been changed with galaxy mini 2 so try that one
or maybe the battery got empty

So Hard Bricked can b revived ?
It installed The Kernel too which i forgot to delete ......
So can i revive it back ? or should'I take it to Shop ? what'll they do btw ???
Sent from my GT-S5570[/QUOTE]

OptimusDusky said:
So Hard Bricked can b revived ?
Sent from my GT-S5570
Click to expand...
Click to collapse
[/QUOTE]
Only by sending it to Samsung repairing center or any local repairing center .
They will change your mother board .
Sent from my GT-S5570

try this to see if your phone can be forced to boot up..
remove the battery from phone
connect the phone to pc, and when the pc beeps put the battery right away..
I tried it on my mini since it can't powered on a few days ago. and it worked.

Gurniwa said:
try this to see if your phone can be forced to boot up..
remove the battery from phone
connect the phone to pc, and when the pc beeps put the battery right away
I tried it on my mini since it can't powered on a few days ago. and it worked.
Click to expand...
Click to collapse
my PC doesn't beep and nothing happens

OptimusDusky said:
my PC doesn't beep and nothing happens
Click to expand...
Click to collapse
Doesn't matter if it beeps or not actually, my PC didn't beep too when I plug the phone but I just put the battery back on and it booted.
I'm afraid your mini is indeed bricked.
You can try a USB jig or "Jtag (correct me if I'm wrong)..
Sent from my GT-S5570 using xda app-developers app

Can't find the JTAG anywhere
where to get it though ? !! ^_^
any idea ?
Sent from my GT-S5570 using xda app-developers app[/QUOTE]

OptimusDusky said:
Can't find the JTAG anywhere
where to get it though ? !! ^_^
any idea ?
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
[/QUOTE]
Dude its expensive (about 150 $)
And it might not work . just send it to Samsung repair center and they will fix it for a cheaper price .
N.B : I did that , my phone got bricked too and as u can it is working .
Sent from my GT-S5570

To me, it looks like it needs to be sent back to Samsung. See if you can get it fixed under warranty, if not you'll have to pay. Good luck.
Sent from my GT-I9100 using xda premium

Xenagirl83 said:
Hi dheeraj, is it possible that an empty or totally dead battery could prevent your phone from "memorizing" the flashing you do with Odin, so to send the device always in boot loop? I'm asking this since I'm having the same problem that the user who opened this thread has described, even if with a GT-S6500. It can only go into download mode, but not into recovery mode (could it be soft bricked?). I don't know what the previous owner did, but I'm trying to resurrect the phone. Thanks in advance for your help.
Click to expand...
Click to collapse
thought your problem got solved
no it cannot happen that without battery the memory would be washed out as it is written on a storage kind of device
what you can do is just flash a four package firmware through odin (phone, pda, csc etc. slots filled)
let the phone reboots on it own, after rebooting the mobile will automatically go into stock recovery and will do some processing and you would be done

[Q] Samsung galaxy s advance dead problem

hi! I did update the phone with odin and put the Russian version (4.1) the problem is that I showed PASS in odin and after .. My phone has not started ... What can I do? I was interested and I know 2 ways, either with usb jig or with jtag (in service), there is a possibility to do it? I tried volume + - button in middle of ... + Power but nothing I put in download mode ... waiting for reply thanks!

You can't enter neither Recovery or Download mode?
And when you hold power button your phone is not giving any signals?
Sent from my GT-I9070

frzek said:
You can't enter neither Recovery or Download mode?
And when you hold power button your phone is not giving any signals?
Sent from my GT-I9070
Click to expand...
Click to collapse
nothing, when you connect the USB to PC connects but disconnects after 2 seconds ..

AseAlex said:
nothing, when you connect the USB to PC connects but disconnects after 2 seconds ..
Click to expand...
Click to collapse
Is the device 9070p?
Sent from my GT-I9070 using xda premium

Shaaan said:
Is the device 9070p?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
yes , GT-I9070P

AseAlex said:
yes , GT-I9070P
Click to expand...
Click to collapse
Omg i9070p not support i9070 rom:banghead:
Sent from my GT-I9070 using Tapatalk 2

Then you bricked it, this firmware is for non-P version.
Sent from my GT-I9070

Shaaan said:
Is the device 9070p?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
frzek said:
Then you bricked it, this firmware is for non-P version.
Sent from my GT-I9070
Click to expand...
Click to collapse
and what to do?

AseAlex said:
and what to do?
Click to expand...
Click to collapse
I don't know. Wait for someone else to answer who have P version.
Sent from my GT-I9070

AseAlex said:
and what to do?
Click to expand...
Click to collapse
You have hardbricked it. Give it for repair!
Sent from my GT-I9070 using xda premium

Shaaan said:
You have hardbricked it. Give it for repair!
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
with jtag can repair?

it's better to go service centre bcoz that set is hard birik i think s c accept your set to warranty
i am right or no

singhdharmendra48 said:
it's better to go service centre bcoz that set is hard birik i think s c accept your set to warranty
i am right or no
Click to expand...
Click to collapse
Well that and I want to do a workshop with jtag .. for to me in romania ... lose the warranty if you change the phone software

the service center will dont know you changed the software..
Sent from my GT-I9070 using xda premium

A LOT OF PEOPLE are bricking I9070-P by flashing JB,
darn it,Read PROPERLY,
Its never mentioned that it works
in P.

I was the first 9070P user to flash it , first 9070P user to brick using it and the first 9070P user to warn about it
YET PEOPLE DO NOT LISTEN

CallMeVentus said:
I was the first 9070P user to flash it , first 9070P user to brick using it and the first 9070P user to warn about it
YET PEOPLE DO NOT LISTEN
Click to expand...
Click to collapse
yeah seriously! ppl just read "s advance" and flash blindly!

I9070 & I9070P seem to be quite different. There is much development for I9070 and little with I9070P. In addition to I9070 bins bricking I9070P devices, there are no recovery programs such as CWM or TWRP for the I9070P. The difference between the two devices may be enough to warrant independent discussions or separate threads.

purplepizza said:
I9070 & I9070P seem to be quite different. There is much development for I9070 and little with I9070P. In addition to I9070 bins bricking I9070P devices, there are no recovery programs such as CWM or TWRP for the I9070P. The difference between the two devices may be enough to warrant independent discussions or separate threads.
Click to expand...
Click to collapse
And still we got just part of I9000 forum... And S3 mini got 5-6 forums.

shut_down said:
And still we got just part of I9000 forum... And S3 mini got 5-6 forums.
Click to expand...
Click to collapse
Technically the mini should have got a sub forum in s3 forum!! Damned naming system!!

[Q] Galaxy S Advance won't turn on at all after jellybean update.

I got a samsung galaxy s advance and tried updating it to jellybean. After the update was downloaded and i guess installed, it was restarting. Now it won't at all turn on, no logo nothing.. I tried going into recovery or download modes but the phone still doesn't respond.
Recharging it doesn't make a difference either.
What should I do to get it to at least light up again ?!

JoePhilip said:
I got a samsung galaxy s advance and tried updating it to jellybean. After the update was downloaded and i guess installed, it was restarting. Now it won't at all turn on, no logo nothing.. I tried going into recovery or download modes but the phone still doesn't respond.
Recharging it doesn't make a difference either.
What should I do to get it to at least light up again ?!
Click to expand...
Click to collapse
What method did you use to update it?

shut_down said:
What method did you use to update it?
Click to expand...
Click to collapse
From the settings in the phone, check for updates then update, it downloaded then said it would restart

Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium

Abhinandh Ajay said:
Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I'm pretty sure it was the right update, all i did was wait for it to load and install, then after restarting i waited for half an hour and the phone didn't turn on, then i removed the battery and put it in again, still nothing

Abhinandh Ajay said:
Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.

shut_down said:
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.
Click to expand...
Click to collapse
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff

shut_down said:
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.
Click to expand...
Click to collapse
Oh I was actually typing my post when he posted his post so i didn't know what he had posted so that's why I asked that.
Sent from my GT-I9070 using xda premium

JoePhilip said:
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff
Click to expand...
Click to collapse
I think Jtag could help, take it to some service with Jtag and see how much they will ask for fix.
Tried to pull out the battery, and pull it then power on?

shut_down said:
I think Jtag could help, take it to some service with Jtag and see how much they will ask for fix.
Tried to pull out the battery, and pull it then power on?
Click to expand...
Click to collapse
I guess I will then.. But do you know approximately how much it will cost ?
And yeah i tried everything, the damn thing won't light up

JoePhilip said:
I guess I will then.. But do you know approximately how much it will cost ?
And yeah i tried everything, the damn thing won't light up
Click to expand...
Click to collapse
I had a problem on GB, Samsung animation was mess and I couldn't go to download mode (recovery worked, and couldn't boot). I payed about 20$ for that fix.

JoePhilip said:
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff
Click to expand...
Click to collapse
Why don't you have your warranty?
Sent from my GT-I9070
CyanogenMod 10

shut_down said:
I had a problem on GB, Samsung animation was mess and I couldn't go to download mode (recovery worked, and couldn't boot). I payed about 20$ for that fix.
Click to expand...
Click to collapse
I gave it to a repair shop and they told me it'll be ready by tomorrow I hope it works
AnMotass said:
Why don't you have your warranty?
Sent from my GT-I9070
CyanogenMod 10
Click to expand...
Click to collapse
Let's just say i bought it without one

i have the same problem
i have the same problem , plz tolled me if the mobile work fine or not ...
ihave the same problem after updating my mobile using software update it restart and then won't turn on again :crying::crying:...
can any one help me ...
Samsung galaxy s advance GT-I9070

eng_hossam_09 said:
i have the same problem , plz tolled me if the mobile work fine or not ...
ihave the same problem after updating my mobile using software update it restart and then won't turn on again :crying::crying:...
can any one help me ...
Samsung galaxy s advance GT-I9070
Click to expand...
Click to collapse
FACTORY RESET. I see you posted from your phone, soo it boots.