hi! I did update the phone with odin and put the Russian version (4.1) the problem is that I showed PASS in odin and after .. My phone has not started ... What can I do? I was interested and I know 2 ways, either with usb jig or with jtag (in service), there is a possibility to do it? I tried volume + - button in middle of ... + Power but nothing I put in download mode ... waiting for reply thanks!
You can't enter neither Recovery or Download mode?
And when you hold power button your phone is not giving any signals?
Sent from my GT-I9070
frzek said:
You can't enter neither Recovery or Download mode?
And when you hold power button your phone is not giving any signals?
Sent from my GT-I9070
Click to expand...
Click to collapse
nothing, when you connect the USB to PC connects but disconnects after 2 seconds ..
AseAlex said:
nothing, when you connect the USB to PC connects but disconnects after 2 seconds ..
Click to expand...
Click to collapse
Is the device 9070p?
Sent from my GT-I9070 using xda premium
Shaaan said:
Is the device 9070p?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
yes , GT-I9070P
AseAlex said:
yes , GT-I9070P
Click to expand...
Click to collapse
Omg i9070p not support i9070 rom:banghead:
Sent from my GT-I9070 using Tapatalk 2
Then you bricked it, this firmware is for non-P version.
Sent from my GT-I9070
Shaaan said:
Is the device 9070p?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
frzek said:
Then you bricked it, this firmware is for non-P version.
Sent from my GT-I9070
Click to expand...
Click to collapse
and what to do?
AseAlex said:
and what to do?
Click to expand...
Click to collapse
I don't know. Wait for someone else to answer who have P version.
Sent from my GT-I9070
AseAlex said:
and what to do?
Click to expand...
Click to collapse
You have hardbricked it. Give it for repair!
Sent from my GT-I9070 using xda premium
Shaaan said:
You have hardbricked it. Give it for repair!
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
with jtag can repair?
it's better to go service centre bcoz that set is hard birik i think s c accept your set to warranty
i am right or no
singhdharmendra48 said:
it's better to go service centre bcoz that set is hard birik i think s c accept your set to warranty
i am right or no
Click to expand...
Click to collapse
Well that and I want to do a workshop with jtag .. for to me in romania ... lose the warranty if you change the phone software
the service center will dont know you changed the software..
Sent from my GT-I9070 using xda premium
A LOT OF PEOPLE are bricking I9070-P by flashing JB,
darn it,Read PROPERLY,
Its never mentioned that it works
in P.
I was the first 9070P user to flash it , first 9070P user to brick using it and the first 9070P user to warn about it
YET PEOPLE DO NOT LISTEN
CallMeVentus said:
I was the first 9070P user to flash it , first 9070P user to brick using it and the first 9070P user to warn about it
YET PEOPLE DO NOT LISTEN
Click to expand...
Click to collapse
yeah seriously! ppl just read "s advance" and flash blindly!
I9070 & I9070P seem to be quite different. There is much development for I9070 and little with I9070P. In addition to I9070 bins bricking I9070P devices, there are no recovery programs such as CWM or TWRP for the I9070P. The difference between the two devices may be enough to warrant independent discussions or separate threads.
purplepizza said:
I9070 & I9070P seem to be quite different. There is much development for I9070 and little with I9070P. In addition to I9070 bins bricking I9070P devices, there are no recovery programs such as CWM or TWRP for the I9070P. The difference between the two devices may be enough to warrant independent discussions or separate threads.
Click to expand...
Click to collapse
And still we got just part of I9000 forum... And S3 mini got 5-6 forums.
shut_down said:
And still we got just part of I9000 forum... And S3 mini got 5-6 forums.
Click to expand...
Click to collapse
Technically the mini should have got a sub forum in s3 forum!! Damned naming system!!
Related
Hello everyone,i have a big problem.My Galaxy note n7000 was totally ded.I install MIUI Rom and the installation is completed to the end but when I rebooted the phone is not turned on.not react at all,and pc does not recognize it.i tried everything what i found here but nothing.Pleasee help me
Can you still get to download mode (vol down + home + power) or recovery (vol up + home + power)?
And also, what ROM were you using when you flashed miui?
Sent from my GT-N7000 using XDA Premium HD app
n7000
No,No react at all...i used 4.0.4 CriskeloRom and everything goes fine..wipe....installing is finish successfully,after i restart phone and he died...
Your english is just too awesome.. I can't stop laughing! Thanks you made my day
Sent from my GT-N7000 using Tapatalk 2
Haaaaaa
abhinav quietly brilliant said:
Your english is just too awesome.. I can't stop laughing! Thanks you made my day
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Ja sam bre SRBIN a ne englez!!!! )))
Vladisha said:
Ja sam bre SRBIN a ne englez!!!! )))
Click to expand...
Click to collapse
Sorry for bad English
Vladisha said:
Sorry for bad English
Click to expand...
Click to collapse
what percentage of your battery before flashing?
I quests your phone is not death...but your battery, charge your phone 1st...
zai89 said:
what percentage of your battery before flashing?
I quests your phone is not death...but your battery, charge your phone 1st...
Click to expand...
Click to collapse
charged and nothing...i found solution but i i can't post link of youtube...I need services who have JTAG device.JTAG can unbrick every samsung and some other phones...
Vladisha said:
charged and nothing...i found solution but i i can't post link of youtube...I need services who have JTAG device.JTAG can unbrick every samsung and some other phones...
Click to expand...
Click to collapse
You first need to know what happend when you tried to install MIUI. Jtag only unbrick the HardBricked devices, because they repartitions the whole phone. Some bricks prevents your note begin charged, so you need an external charger for the battery or another note. Charge it and try again. Sorry my bad english too!
Vladisha said:
charged and nothing...i found solution but i i can't post link of youtube...I need services who have JTAG device.JTAG can unbrick every samsung and some other phones...
Click to expand...
Click to collapse
Ya..go ahead if you sure your phone is death
Sent from my GT-N7000 using Tapatalk HD
galaxynote2 said:
You first need to know what happend when you tried to install MIUI. Jtag only unbrick the HardBricked devices, because they repartitions the whole phone. Some bricks prevents your note begin charged, so you need an external charger for the battery or another note. Charge it and try again. Sorry my bad english too!
Click to expand...
Click to collapse
I carried in a local service and they told me it's dead certain eMMC chip but I think they do not have JTAG device
abhinav quietly brilliant said:
Your english is just too awesome.. I can't stop laughing! Thanks you made my day
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
You don't have to spew your brilliant thoughts if you can't help someone.
Vladisha said:
JTAG can unbrick every samsung and some other phones...
Click to expand...
Click to collapse
Unfortunately, no it can't. Jtag can revive traditional hardbricks where bootloader is gone, but can do nothing for superbricked Notes.
I don't know of a single superbrick case where Jtagging helped, and I've been around here for a long time.
And judging by the symptoms, you have a superbrick on your hands.
Boy124 said:
You don't have to spew your brilliant thoughts if you can't help someone.
Click to expand...
Click to collapse
A question in general section.. I don't care about it all untill it's been moved to q&a section even wondering why everyone is posting their replies here even chasmodo did..
Sent from my GT-N7000 using Tapatalk 2
Did you try "jig"
And
Did odin recognize the device
Try this :
Pull out the battery and remove sim card and micro sd
Then leave the battery bulled out for 3 minutes
Then let any one but the battery back while you keep pushing volume up, power button and home button
Sent from my phone using Tapatalk
abhinav quietly brilliant said:
A question in general section.. I don't care about it all untill it's been moved to q&a section even wondering why everyone is posting their replies here even chasmodo did..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Why you a here if you do not care??..just ignore or use the report button...
Sent from my GT-N7000 using Tapatalk HD
zai89 said:
Why you a here if you do not care??..just ignore or use the report button...
Sent from my GT-N7000 using Tapatalk HD
Click to expand...
Click to collapse
I already did but the mods are in deep sleep mode.. Lol
Sent from my GT-N7000 using Tapatalk 2
umbrella android said:
Did you try "jig"
And
Did odin recognize the device
Try this :
Pull out the battery and remove sim card and micro sd
Then leave the battery bulled out for 3 minutes
Then let any one but the battery back while you keep pushing volume up, power button and home button
I tried everything .. just dead.I was wearing device in the local service they turned it on a RIFF device and told me how they can access in device data and can erase them but cannot enter new?I do not understand so well in all of this ... they told me that's dead eMMC round or CHIP...I do not believe it because the installation passed without problems and the device is not overheated.
Click to expand...
Click to collapse
Vladisha said:
No,No react at all...i used 4.0.4 CriskeloRom and everything goes fine..wipe....installing is finish successfully,after i restart phone and he died...
Click to expand...
Click to collapse
Everything was NOT OK, otherwise it would be working. As you made a full backup(did you not) restore that.
Sent from BOX13.
howard bamber said:
Everything was NOT OK, otherwise it would be working. As you made a full backup(did you not) restore that.
Sent from BOX13.
Click to expand...
Click to collapse
YEs you're right, I did not do backup i not know what to do now becose device i totally died...
Hello, when I installed 4.1.2 JB LQB during mid-installation is interrupted, so I thought to restart the phone and start the download again the mod, but the phone did not want to turn now, can you fix it?
Um... can you boot into download, recovery or system?
maniaczek1111 said:
Hello, when I installed 4.1.2 JB LQB during mid-installation is interrupted, so I thought to restart the phone and start the download again the mod, but the phone did not want to turn now, can you fix it?
Click to expand...
Click to collapse
Can you start your phone in download mode. If yes connect to pc and try to reinstall rom with odin. Then it hopefully continuing with the procedure.
Sent from my GT-I9070 using xda app-developers app
No ,phone don't start at download mode...
Dead dead? No charge no nothing?
Sent from the little guy
maniaczek1111 said:
No ,phone don't start at download mode...
Click to expand...
Click to collapse
Does it show you any screen?
Sent from my GT-I9070 using xda app-developers app
maniaczek1111 said:
No ,phone don't start at download mode...
Click to expand...
Click to collapse
Does it show screen like this?
Sent from my GT-I9070 using xda app-developers app
No, I have often had and repaired ...
So.. what's the screen say?
Just black?
Can you go to recovery or download mode?
Sent from my GT-I9070 using xda app-developers app
Phone is dead.
maniaczek1111 said:
Phone is dead.
Click to expand...
Click to collapse
Service centre.
claim warranty, tell them it just went off.
If it's bricked, no one will know.
Sent from the little guy
Thanks all for help me...
you can also claim that you where updating via OTA and the phone turned itself off while the upgrade.
Sent from the little guy
gastonw said:
you can also claim that you where updating via OTA and the phone turned itself off while the upgrade.
Sent from the little guy
Click to expand...
Click to collapse
Now that's smart
It's not about how you brick it, it's about them trying to prove it.
See the brick bug of 4.0.4 with the S2, you claim it and they can't say sh*t because it's samsung fault.
Sent from the little guy
galaxy s advance i9070 dead
:crying::crying:
my phone is break and do not show any things and cannot any things black and black
i am from iran and cannot acsess service center
please help me to
1 boot up
2 inter the boot without box or jtag via usb
zakaria9 said:
:crying::crying:
my phone is break and do not show any things and cannot any things black and black
i am from iran and cannot acsess service center
please help me to
1 boot up
2 inter the boot without box or jtag via usb
Click to expand...
Click to collapse
No download mode?
Sent from my GT-I9105P
no download mod full dead
Bricked.
Service center or donate to a dev ...
I got a samsung galaxy s advance and tried updating it to jellybean. After the update was downloaded and i guess installed, it was restarting. Now it won't at all turn on, no logo nothing.. I tried going into recovery or download modes but the phone still doesn't respond.
Recharging it doesn't make a difference either.
What should I do to get it to at least light up again ?!
JoePhilip said:
I got a samsung galaxy s advance and tried updating it to jellybean. After the update was downloaded and i guess installed, it was restarting. Now it won't at all turn on, no logo nothing.. I tried going into recovery or download modes but the phone still doesn't respond.
Recharging it doesn't make a difference either.
What should I do to get it to at least light up again ?!
Click to expand...
Click to collapse
What method did you use to update it?
shut_down said:
What method did you use to update it?
Click to expand...
Click to collapse
From the settings in the phone, check for updates then update, it downloaded then said it would restart
Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium
Abhinandh Ajay said:
Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I'm pretty sure it was the right update, all i did was wait for it to load and install, then after restarting i waited for half an hour and the phone didn't turn on, then i removed the battery and put it in again, still nothing
Abhinandh Ajay said:
Are you sure you used the update file for I9070 or some other phone? And did you, by chance disturb the phone during the update?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.
shut_down said:
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.
Click to expand...
Click to collapse
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff
shut_down said:
As I understand he used OTA update, so no chance he used some other phone firmware. If you have warranty just go to service center and told what happend.
Click to expand...
Click to collapse
Oh I was actually typing my post when he posted his post so i didn't know what he had posted so that's why I asked that.
Sent from my GT-I9070 using xda premium
JoePhilip said:
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff
Click to expand...
Click to collapse
I think Jtag could help, take it to some service with Jtag and see how much they will ask for fix.
Tried to pull out the battery, and pull it then power on?
shut_down said:
I think Jtag could help, take it to some service with Jtag and see how much they will ask for fix.
Tried to pull out the battery, and pull it then power on?
Click to expand...
Click to collapse
I guess I will then.. But do you know approximately how much it will cost ?
And yeah i tried everything, the damn thing won't light up
JoePhilip said:
I guess I will then.. But do you know approximately how much it will cost ?
And yeah i tried everything, the damn thing won't light up
Click to expand...
Click to collapse
I had a problem on GB, Samsung animation was mess and I couldn't go to download mode (recovery worked, and couldn't boot). I payed about 20$ for that fix.
JoePhilip said:
Yeahh the problem is i don't have the warranty
Is there any way it could be fixed ? Like the jtag thing or anything like so ? Sorry Idk much about that stuff
Click to expand...
Click to collapse
Why don't you have your warranty?
Sent from my GT-I9070
CyanogenMod 10
shut_down said:
I had a problem on GB, Samsung animation was mess and I couldn't go to download mode (recovery worked, and couldn't boot). I payed about 20$ for that fix.
Click to expand...
Click to collapse
I gave it to a repair shop and they told me it'll be ready by tomorrow I hope it works
AnMotass said:
Why don't you have your warranty?
Sent from my GT-I9070
CyanogenMod 10
Click to expand...
Click to collapse
Let's just say i bought it without one
i have the same problem
i have the same problem , plz tolled me if the mobile work fine or not ...
ihave the same problem after updating my mobile using software update it restart and then won't turn on again :crying::crying:...
can any one help me ...
Samsung galaxy s advance GT-I9070
eng_hossam_09 said:
i have the same problem , plz tolled me if the mobile work fine or not ...
ihave the same problem after updating my mobile using software update it restart and then won't turn on again :crying::crying:...
can any one help me ...
Samsung galaxy s advance GT-I9070
Click to expand...
Click to collapse
FACTORY RESET. I see you posted from your phone, soo it boots.
Hi all,
My Galaxy s Advanced is dead after try install new rom with Odin ( Android 4.1.2 DXAMD1)
i received the" red Failed" on Odin and now my phone is dead ( black screen ) is there a way to go back the factory default?
Thank in advance.
Salento.
Are you able to enter recovery mode or download mode
Sent from my GT-I9070 using xda premium
Abhinandh Ajay said:
Are you able to enter recovery mode or download mode
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I tried but cant' see nothing, always black screen
Did you removed battery for some time?
Sent from my GT-I9070 using xda premium
R_a_z_v_a_n said:
Did you removed battery for some time?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Yes i did but no way can' t understand what was wrong, i the past already upgraded the phone without any problem.
salento9 said:
Yes i did but no way can' t understand what was wrong, i the past already upgraded the phone without any problem.
Click to expand...
Click to collapse
Was your phone on low battery when you started the upgrade?
Sent from my GT-I9070 using xda premium
Abhinandh Ajay said:
Was your phone on low battery when you started the upgrade?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Non i had 79% of battery
salento9 said:
Non i had 79% of battery
Click to expand...
Click to collapse
If in any way, the update process was disturbed ( loose cable etc.) I'm sorry to say your phone might be hard bricked. If you can enter download mode it's just a soft brick and you can just flash the firmware.
Otherwise you can goto the service centre, see if they will repair it under warranty. Or try something like USB jig.
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
harith.unnikrishnan said:
If in any way, the update process was disturbed ( loose cable etc.) I'm sorry to say your phone might be hard bricked. If you can enter download mode it's just a soft brick and you can just flash the firmware.
Otherwise you can goto the service centre, see if they will repair it under warranty. Or try something like USB jig.
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-6.2
Recovery - TWRP 2.5
Click to expand...
Click to collapse
Where can i buy usb jig ( please no ebay)
http://forum.xda-developers.com/showthread.php?t=1891197
Closed Force said:
http://forum.xda-developers.com/showthread.php?t=1891197
Click to expand...
Click to collapse
Great, nice thank you very much.
salento9 said:
Hi all,
My Galaxy s Advanced is dead after try install new rom with Odin ( Android 4.1.2 DXAMD1)
i received the" red Failed" on Odin and now my phone is dead ( black screen ) is there a way to go back the factory default?
Thank in advance.
Salento.
Click to expand...
Click to collapse
May your phone rest in peace!
hello and hi.
i hope u all can help me solving my problem
i already search everywhere until page 100 in google search engine but still no luck.
okay here my problem
i using samsung galaxy S advance GT-I9070. the phone not root yet . i try to update and flash latest rom. while processing suddenly my computer power turn off on its own.
i try to use usb JIG do get into download mode but useless.
i try 3 button combo also no result shows.
even my phone cannot turn on and the screen keep blank.
but when i plug in usb to computer it detect with something but only for 1 sec . it detect on device manager and shows "u8500 usb rom".
It's probably a hard brick.... maybe you should look into JTAG
Wait for a second opinion though, I'm not 100% sure.
Hard brick for me
Sent from my GT-I9070 using xda app-developers app
frapeti said:
Hard brick for me
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
What?
For my opinion its hard brick when you see the motherboard name while connecting it to the PC
Sent from my GT-I9070 using xda app-developers app
frapeti said:
For my opinion its hard brick when you see the motherboard name while connecting it to the PC
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
So how to solve this hard brick?? Can somebody help me?? :crying::crying::crying:
iammarikhlas said:
So how to solve this hard brick?? Can somebody help me?? :crying::crying::crying:
Click to expand...
Click to collapse
Afraid you will probably have to go to a service center.. sorry
It's a hard brick. Jtag or service center. Choice is yours!
Sent from my GT-I9070 using Tapatalk 4 Beta